1 /* 2 * Copyright 2008, Freescale Semiconductor, Inc 3 * Andy Fleming 4 * 5 * Based vaguely on the Linux code 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #include <config.h> 11 #include <common.h> 12 #include <command.h> 13 #include <dm.h> 14 #include <dm/device-internal.h> 15 #include <errno.h> 16 #include <mmc.h> 17 #include <part.h> 18 #include <malloc.h> 19 #include <memalign.h> 20 #include <linux/list.h> 21 #include <div64.h> 22 #include "mmc_private.h" 23 24 static struct list_head mmc_devices; 25 static int cur_dev_num = -1; 26 27 __weak int board_mmc_getwp(struct mmc *mmc) 28 { 29 return -1; 30 } 31 32 int mmc_getwp(struct mmc *mmc) 33 { 34 int wp; 35 36 wp = board_mmc_getwp(mmc); 37 38 if (wp < 0) { 39 if (mmc->cfg->ops->getwp) 40 wp = mmc->cfg->ops->getwp(mmc); 41 else 42 wp = 0; 43 } 44 45 return wp; 46 } 47 48 __weak int board_mmc_getcd(struct mmc *mmc) 49 { 50 return -1; 51 } 52 53 int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) 54 { 55 int ret; 56 57 #ifdef CONFIG_MMC_TRACE 58 int i; 59 u8 *ptr; 60 61 printf("CMD_SEND:%d\n", cmd->cmdidx); 62 printf("\t\tARG\t\t\t 0x%08X\n", cmd->cmdarg); 63 ret = mmc->cfg->ops->send_cmd(mmc, cmd, data); 64 switch (cmd->resp_type) { 65 case MMC_RSP_NONE: 66 printf("\t\tMMC_RSP_NONE\n"); 67 break; 68 case MMC_RSP_R1: 69 printf("\t\tMMC_RSP_R1,5,6,7 \t 0x%08X \n", 70 cmd->response[0]); 71 break; 72 case MMC_RSP_R1b: 73 printf("\t\tMMC_RSP_R1b\t\t 0x%08X \n", 74 cmd->response[0]); 75 break; 76 case MMC_RSP_R2: 77 printf("\t\tMMC_RSP_R2\t\t 0x%08X \n", 78 cmd->response[0]); 79 printf("\t\t \t\t 0x%08X \n", 80 cmd->response[1]); 81 printf("\t\t \t\t 0x%08X \n", 82 cmd->response[2]); 83 printf("\t\t \t\t 0x%08X \n", 84 cmd->response[3]); 85 printf("\n"); 86 printf("\t\t\t\t\tDUMPING DATA\n"); 87 for (i = 0; i < 4; i++) { 88 int j; 89 printf("\t\t\t\t\t%03d - ", i*4); 90 ptr = (u8 *)&cmd->response[i]; 91 ptr += 3; 92 for (j = 0; j < 4; j++) 93 printf("%02X ", *ptr--); 94 printf("\n"); 95 } 96 break; 97 case MMC_RSP_R3: 98 printf("\t\tMMC_RSP_R3,4\t\t 0x%08X \n", 99 cmd->response[0]); 100 break; 101 default: 102 printf("\t\tERROR MMC rsp not supported\n"); 103 break; 104 } 105 #else 106 ret = mmc->cfg->ops->send_cmd(mmc, cmd, data); 107 #endif 108 return ret; 109 } 110 111 int mmc_send_status(struct mmc *mmc, int timeout) 112 { 113 struct mmc_cmd cmd; 114 int err, retries = 5; 115 #ifdef CONFIG_MMC_TRACE 116 int status; 117 #endif 118 119 cmd.cmdidx = MMC_CMD_SEND_STATUS; 120 cmd.resp_type = MMC_RSP_R1; 121 if (!mmc_host_is_spi(mmc)) 122 cmd.cmdarg = mmc->rca << 16; 123 124 while (1) { 125 err = mmc_send_cmd(mmc, &cmd, NULL); 126 if (!err) { 127 if ((cmd.response[0] & MMC_STATUS_RDY_FOR_DATA) && 128 (cmd.response[0] & MMC_STATUS_CURR_STATE) != 129 MMC_STATE_PRG) 130 break; 131 else if (cmd.response[0] & MMC_STATUS_MASK) { 132 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) 133 printf("Status Error: 0x%08X\n", 134 cmd.response[0]); 135 #endif 136 return COMM_ERR; 137 } 138 } else if (--retries < 0) 139 return err; 140 141 if (timeout-- <= 0) 142 break; 143 144 udelay(1000); 145 } 146 147 #ifdef CONFIG_MMC_TRACE 148 status = (cmd.response[0] & MMC_STATUS_CURR_STATE) >> 9; 149 printf("CURR STATE:%d\n", status); 150 #endif 151 if (timeout <= 0) { 152 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) 153 printf("Timeout waiting card ready\n"); 154 #endif 155 return TIMEOUT; 156 } 157 if (cmd.response[0] & MMC_STATUS_SWITCH_ERROR) 158 return SWITCH_ERR; 159 160 return 0; 161 } 162 163 int mmc_set_blocklen(struct mmc *mmc, int len) 164 { 165 struct mmc_cmd cmd; 166 167 if (mmc->ddr_mode) 168 return 0; 169 170 cmd.cmdidx = MMC_CMD_SET_BLOCKLEN; 171 cmd.resp_type = MMC_RSP_R1; 172 cmd.cmdarg = len; 173 174 return mmc_send_cmd(mmc, &cmd, NULL); 175 } 176 177 struct mmc *find_mmc_device(int dev_num) 178 { 179 struct mmc *m; 180 struct list_head *entry; 181 182 list_for_each(entry, &mmc_devices) { 183 m = list_entry(entry, struct mmc, link); 184 185 if (m->block_dev.devnum == dev_num) 186 return m; 187 } 188 189 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) 190 printf("MMC Device %d not found\n", dev_num); 191 #endif 192 193 return NULL; 194 } 195 196 static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start, 197 lbaint_t blkcnt) 198 { 199 struct mmc_cmd cmd; 200 struct mmc_data data; 201 202 if (blkcnt > 1) 203 cmd.cmdidx = MMC_CMD_READ_MULTIPLE_BLOCK; 204 else 205 cmd.cmdidx = MMC_CMD_READ_SINGLE_BLOCK; 206 207 if (mmc->high_capacity) 208 cmd.cmdarg = start; 209 else 210 cmd.cmdarg = start * mmc->read_bl_len; 211 212 cmd.resp_type = MMC_RSP_R1; 213 214 data.dest = dst; 215 data.blocks = blkcnt; 216 data.blocksize = mmc->read_bl_len; 217 data.flags = MMC_DATA_READ; 218 219 if (mmc_send_cmd(mmc, &cmd, &data)) 220 return 0; 221 222 if (blkcnt > 1) { 223 cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION; 224 cmd.cmdarg = 0; 225 cmd.resp_type = MMC_RSP_R1b; 226 if (mmc_send_cmd(mmc, &cmd, NULL)) { 227 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) 228 printf("mmc fail to send stop cmd\n"); 229 #endif 230 return 0; 231 } 232 } 233 234 return blkcnt; 235 } 236 237 static ulong mmc_bread(struct blk_desc *block_dev, lbaint_t start, 238 lbaint_t blkcnt, void *dst) 239 { 240 int dev_num = block_dev->devnum; 241 int err; 242 lbaint_t cur, blocks_todo = blkcnt; 243 244 if (blkcnt == 0) 245 return 0; 246 247 struct mmc *mmc = find_mmc_device(dev_num); 248 if (!mmc) 249 return 0; 250 251 err = mmc_select_hwpart(dev_num, block_dev->hwpart); 252 if (err < 0) 253 return 0; 254 255 if ((start + blkcnt) > mmc->block_dev.lba) { 256 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) 257 printf("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n", 258 start + blkcnt, mmc->block_dev.lba); 259 #endif 260 return 0; 261 } 262 263 if (mmc_set_blocklen(mmc, mmc->read_bl_len)) { 264 debug("%s: Failed to set blocklen\n", __func__); 265 return 0; 266 } 267 268 do { 269 cur = (blocks_todo > mmc->cfg->b_max) ? 270 mmc->cfg->b_max : blocks_todo; 271 if (mmc_read_blocks(mmc, dst, start, cur) != cur) { 272 debug("%s: Failed to read blocks\n", __func__); 273 return 0; 274 } 275 blocks_todo -= cur; 276 start += cur; 277 dst += cur * mmc->read_bl_len; 278 } while (blocks_todo > 0); 279 280 return blkcnt; 281 } 282 283 static int mmc_go_idle(struct mmc *mmc) 284 { 285 struct mmc_cmd cmd; 286 int err; 287 288 udelay(1000); 289 290 cmd.cmdidx = MMC_CMD_GO_IDLE_STATE; 291 cmd.cmdarg = 0; 292 cmd.resp_type = MMC_RSP_NONE; 293 294 err = mmc_send_cmd(mmc, &cmd, NULL); 295 296 if (err) 297 return err; 298 299 udelay(2000); 300 301 return 0; 302 } 303 304 static int sd_send_op_cond(struct mmc *mmc) 305 { 306 int timeout = 1000; 307 int err; 308 struct mmc_cmd cmd; 309 310 while (1) { 311 cmd.cmdidx = MMC_CMD_APP_CMD; 312 cmd.resp_type = MMC_RSP_R1; 313 cmd.cmdarg = 0; 314 315 err = mmc_send_cmd(mmc, &cmd, NULL); 316 317 if (err) 318 return err; 319 320 cmd.cmdidx = SD_CMD_APP_SEND_OP_COND; 321 cmd.resp_type = MMC_RSP_R3; 322 323 /* 324 * Most cards do not answer if some reserved bits 325 * in the ocr are set. However, Some controller 326 * can set bit 7 (reserved for low voltages), but 327 * how to manage low voltages SD card is not yet 328 * specified. 329 */ 330 cmd.cmdarg = mmc_host_is_spi(mmc) ? 0 : 331 (mmc->cfg->voltages & 0xff8000); 332 333 if (mmc->version == SD_VERSION_2) 334 cmd.cmdarg |= OCR_HCS; 335 336 err = mmc_send_cmd(mmc, &cmd, NULL); 337 338 if (err) 339 return err; 340 341 if (cmd.response[0] & OCR_BUSY) 342 break; 343 344 if (timeout-- <= 0) 345 return UNUSABLE_ERR; 346 347 udelay(1000); 348 } 349 350 if (mmc->version != SD_VERSION_2) 351 mmc->version = SD_VERSION_1_0; 352 353 if (mmc_host_is_spi(mmc)) { /* read OCR for spi */ 354 cmd.cmdidx = MMC_CMD_SPI_READ_OCR; 355 cmd.resp_type = MMC_RSP_R3; 356 cmd.cmdarg = 0; 357 358 err = mmc_send_cmd(mmc, &cmd, NULL); 359 360 if (err) 361 return err; 362 } 363 364 mmc->ocr = cmd.response[0]; 365 366 mmc->high_capacity = ((mmc->ocr & OCR_HCS) == OCR_HCS); 367 mmc->rca = 0; 368 369 return 0; 370 } 371 372 static int mmc_send_op_cond_iter(struct mmc *mmc, int use_arg) 373 { 374 struct mmc_cmd cmd; 375 int err; 376 377 cmd.cmdidx = MMC_CMD_SEND_OP_COND; 378 cmd.resp_type = MMC_RSP_R3; 379 cmd.cmdarg = 0; 380 if (use_arg && !mmc_host_is_spi(mmc)) 381 cmd.cmdarg = OCR_HCS | 382 (mmc->cfg->voltages & 383 (mmc->ocr & OCR_VOLTAGE_MASK)) | 384 (mmc->ocr & OCR_ACCESS_MODE); 385 386 err = mmc_send_cmd(mmc, &cmd, NULL); 387 if (err) 388 return err; 389 mmc->ocr = cmd.response[0]; 390 return 0; 391 } 392 393 static int mmc_send_op_cond(struct mmc *mmc) 394 { 395 int err, i; 396 397 /* Some cards seem to need this */ 398 mmc_go_idle(mmc); 399 400 /* Asking to the card its capabilities */ 401 for (i = 0; i < 2; i++) { 402 err = mmc_send_op_cond_iter(mmc, i != 0); 403 if (err) 404 return err; 405 406 /* exit if not busy (flag seems to be inverted) */ 407 if (mmc->ocr & OCR_BUSY) 408 break; 409 } 410 mmc->op_cond_pending = 1; 411 return 0; 412 } 413 414 static int mmc_complete_op_cond(struct mmc *mmc) 415 { 416 struct mmc_cmd cmd; 417 int timeout = 1000; 418 uint start; 419 int err; 420 421 mmc->op_cond_pending = 0; 422 if (!(mmc->ocr & OCR_BUSY)) { 423 start = get_timer(0); 424 while (1) { 425 err = mmc_send_op_cond_iter(mmc, 1); 426 if (err) 427 return err; 428 if (mmc->ocr & OCR_BUSY) 429 break; 430 if (get_timer(start) > timeout) 431 return UNUSABLE_ERR; 432 udelay(100); 433 } 434 } 435 436 if (mmc_host_is_spi(mmc)) { /* read OCR for spi */ 437 cmd.cmdidx = MMC_CMD_SPI_READ_OCR; 438 cmd.resp_type = MMC_RSP_R3; 439 cmd.cmdarg = 0; 440 441 err = mmc_send_cmd(mmc, &cmd, NULL); 442 443 if (err) 444 return err; 445 446 mmc->ocr = cmd.response[0]; 447 } 448 449 mmc->version = MMC_VERSION_UNKNOWN; 450 451 mmc->high_capacity = ((mmc->ocr & OCR_HCS) == OCR_HCS); 452 mmc->rca = 1; 453 454 return 0; 455 } 456 457 458 static int mmc_send_ext_csd(struct mmc *mmc, u8 *ext_csd) 459 { 460 struct mmc_cmd cmd; 461 struct mmc_data data; 462 int err; 463 464 /* Get the Card Status Register */ 465 cmd.cmdidx = MMC_CMD_SEND_EXT_CSD; 466 cmd.resp_type = MMC_RSP_R1; 467 cmd.cmdarg = 0; 468 469 data.dest = (char *)ext_csd; 470 data.blocks = 1; 471 data.blocksize = MMC_MAX_BLOCK_LEN; 472 data.flags = MMC_DATA_READ; 473 474 err = mmc_send_cmd(mmc, &cmd, &data); 475 476 return err; 477 } 478 479 480 static int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value) 481 { 482 struct mmc_cmd cmd; 483 int timeout = 1000; 484 int ret; 485 486 cmd.cmdidx = MMC_CMD_SWITCH; 487 cmd.resp_type = MMC_RSP_R1b; 488 cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | 489 (index << 16) | 490 (value << 8); 491 492 ret = mmc_send_cmd(mmc, &cmd, NULL); 493 494 /* Waiting for the ready status */ 495 if (!ret) 496 ret = mmc_send_status(mmc, timeout); 497 498 return ret; 499 500 } 501 502 static int mmc_change_freq(struct mmc *mmc) 503 { 504 ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN); 505 char cardtype; 506 int err; 507 508 mmc->card_caps = 0; 509 510 if (mmc_host_is_spi(mmc)) 511 return 0; 512 513 /* Only version 4 supports high-speed */ 514 if (mmc->version < MMC_VERSION_4) 515 return 0; 516 517 mmc->card_caps |= MMC_MODE_4BIT | MMC_MODE_8BIT; 518 519 err = mmc_send_ext_csd(mmc, ext_csd); 520 521 if (err) 522 return err; 523 524 cardtype = ext_csd[EXT_CSD_CARD_TYPE] & 0xf; 525 526 err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, 1); 527 528 if (err) 529 return err == SWITCH_ERR ? 0 : err; 530 531 /* Now check to see that it worked */ 532 err = mmc_send_ext_csd(mmc, ext_csd); 533 534 if (err) 535 return err; 536 537 /* No high-speed support */ 538 if (!ext_csd[EXT_CSD_HS_TIMING]) 539 return 0; 540 541 /* High Speed is set, there are two types: 52MHz and 26MHz */ 542 if (cardtype & EXT_CSD_CARD_TYPE_52) { 543 if (cardtype & EXT_CSD_CARD_TYPE_DDR_1_8V) 544 mmc->card_caps |= MMC_MODE_DDR_52MHz; 545 mmc->card_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; 546 } else { 547 mmc->card_caps |= MMC_MODE_HS; 548 } 549 550 return 0; 551 } 552 553 static int mmc_set_capacity(struct mmc *mmc, int part_num) 554 { 555 switch (part_num) { 556 case 0: 557 mmc->capacity = mmc->capacity_user; 558 break; 559 case 1: 560 case 2: 561 mmc->capacity = mmc->capacity_boot; 562 break; 563 case 3: 564 mmc->capacity = mmc->capacity_rpmb; 565 break; 566 case 4: 567 case 5: 568 case 6: 569 case 7: 570 mmc->capacity = mmc->capacity_gp[part_num - 4]; 571 break; 572 default: 573 return -1; 574 } 575 576 mmc->block_dev.lba = lldiv(mmc->capacity, mmc->read_bl_len); 577 578 return 0; 579 } 580 581 int mmc_select_hwpart(int dev_num, int hwpart) 582 { 583 struct mmc *mmc = find_mmc_device(dev_num); 584 int ret; 585 586 if (!mmc) 587 return -ENODEV; 588 589 if (mmc->block_dev.hwpart == hwpart) 590 return 0; 591 592 if (mmc->part_config == MMCPART_NOAVAILABLE) { 593 printf("Card doesn't support part_switch\n"); 594 return -EMEDIUMTYPE; 595 } 596 597 ret = mmc_switch_part(dev_num, hwpart); 598 if (ret) 599 return ret; 600 601 return 0; 602 } 603 604 605 int mmc_switch_part(int dev_num, unsigned int part_num) 606 { 607 struct mmc *mmc = find_mmc_device(dev_num); 608 int ret; 609 610 if (!mmc) 611 return -1; 612 613 ret = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_PART_CONF, 614 (mmc->part_config & ~PART_ACCESS_MASK) 615 | (part_num & PART_ACCESS_MASK)); 616 617 /* 618 * Set the capacity if the switch succeeded or was intended 619 * to return to representing the raw device. 620 */ 621 if ((ret == 0) || ((ret == -ENODEV) && (part_num == 0))) { 622 ret = mmc_set_capacity(mmc, part_num); 623 mmc->block_dev.hwpart = part_num; 624 } 625 626 return ret; 627 } 628 629 int mmc_hwpart_config(struct mmc *mmc, 630 const struct mmc_hwpart_conf *conf, 631 enum mmc_hwpart_conf_mode mode) 632 { 633 u8 part_attrs = 0; 634 u32 enh_size_mult; 635 u32 enh_start_addr; 636 u32 gp_size_mult[4]; 637 u32 max_enh_size_mult; 638 u32 tot_enh_size_mult = 0; 639 u8 wr_rel_set; 640 int i, pidx, err; 641 ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN); 642 643 if (mode < MMC_HWPART_CONF_CHECK || mode > MMC_HWPART_CONF_COMPLETE) 644 return -EINVAL; 645 646 if (IS_SD(mmc) || (mmc->version < MMC_VERSION_4_41)) { 647 printf("eMMC >= 4.4 required for enhanced user data area\n"); 648 return -EMEDIUMTYPE; 649 } 650 651 if (!(mmc->part_support & PART_SUPPORT)) { 652 printf("Card does not support partitioning\n"); 653 return -EMEDIUMTYPE; 654 } 655 656 if (!mmc->hc_wp_grp_size) { 657 printf("Card does not define HC WP group size\n"); 658 return -EMEDIUMTYPE; 659 } 660 661 /* check partition alignment and total enhanced size */ 662 if (conf->user.enh_size) { 663 if (conf->user.enh_size % mmc->hc_wp_grp_size || 664 conf->user.enh_start % mmc->hc_wp_grp_size) { 665 printf("User data enhanced area not HC WP group " 666 "size aligned\n"); 667 return -EINVAL; 668 } 669 part_attrs |= EXT_CSD_ENH_USR; 670 enh_size_mult = conf->user.enh_size / mmc->hc_wp_grp_size; 671 if (mmc->high_capacity) { 672 enh_start_addr = conf->user.enh_start; 673 } else { 674 enh_start_addr = (conf->user.enh_start << 9); 675 } 676 } else { 677 enh_size_mult = 0; 678 enh_start_addr = 0; 679 } 680 tot_enh_size_mult += enh_size_mult; 681 682 for (pidx = 0; pidx < 4; pidx++) { 683 if (conf->gp_part[pidx].size % mmc->hc_wp_grp_size) { 684 printf("GP%i partition not HC WP group size " 685 "aligned\n", pidx+1); 686 return -EINVAL; 687 } 688 gp_size_mult[pidx] = conf->gp_part[pidx].size / mmc->hc_wp_grp_size; 689 if (conf->gp_part[pidx].size && conf->gp_part[pidx].enhanced) { 690 part_attrs |= EXT_CSD_ENH_GP(pidx); 691 tot_enh_size_mult += gp_size_mult[pidx]; 692 } 693 } 694 695 if (part_attrs && ! (mmc->part_support & ENHNCD_SUPPORT)) { 696 printf("Card does not support enhanced attribute\n"); 697 return -EMEDIUMTYPE; 698 } 699 700 err = mmc_send_ext_csd(mmc, ext_csd); 701 if (err) 702 return err; 703 704 max_enh_size_mult = 705 (ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT+2] << 16) + 706 (ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT+1] << 8) + 707 ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT]; 708 if (tot_enh_size_mult > max_enh_size_mult) { 709 printf("Total enhanced size exceeds maximum (%u > %u)\n", 710 tot_enh_size_mult, max_enh_size_mult); 711 return -EMEDIUMTYPE; 712 } 713 714 /* The default value of EXT_CSD_WR_REL_SET is device 715 * dependent, the values can only be changed if the 716 * EXT_CSD_HS_CTRL_REL bit is set. The values can be 717 * changed only once and before partitioning is completed. */ 718 wr_rel_set = ext_csd[EXT_CSD_WR_REL_SET]; 719 if (conf->user.wr_rel_change) { 720 if (conf->user.wr_rel_set) 721 wr_rel_set |= EXT_CSD_WR_DATA_REL_USR; 722 else 723 wr_rel_set &= ~EXT_CSD_WR_DATA_REL_USR; 724 } 725 for (pidx = 0; pidx < 4; pidx++) { 726 if (conf->gp_part[pidx].wr_rel_change) { 727 if (conf->gp_part[pidx].wr_rel_set) 728 wr_rel_set |= EXT_CSD_WR_DATA_REL_GP(pidx); 729 else 730 wr_rel_set &= ~EXT_CSD_WR_DATA_REL_GP(pidx); 731 } 732 } 733 734 if (wr_rel_set != ext_csd[EXT_CSD_WR_REL_SET] && 735 !(ext_csd[EXT_CSD_WR_REL_PARAM] & EXT_CSD_HS_CTRL_REL)) { 736 puts("Card does not support host controlled partition write " 737 "reliability settings\n"); 738 return -EMEDIUMTYPE; 739 } 740 741 if (ext_csd[EXT_CSD_PARTITION_SETTING] & 742 EXT_CSD_PARTITION_SETTING_COMPLETED) { 743 printf("Card already partitioned\n"); 744 return -EPERM; 745 } 746 747 if (mode == MMC_HWPART_CONF_CHECK) 748 return 0; 749 750 /* Partitioning requires high-capacity size definitions */ 751 if (!(ext_csd[EXT_CSD_ERASE_GROUP_DEF] & 0x01)) { 752 err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, 753 EXT_CSD_ERASE_GROUP_DEF, 1); 754 755 if (err) 756 return err; 757 758 ext_csd[EXT_CSD_ERASE_GROUP_DEF] = 1; 759 760 /* update erase group size to be high-capacity */ 761 mmc->erase_grp_size = 762 ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] * 1024; 763 764 } 765 766 /* all OK, write the configuration */ 767 for (i = 0; i < 4; i++) { 768 err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, 769 EXT_CSD_ENH_START_ADDR+i, 770 (enh_start_addr >> (i*8)) & 0xFF); 771 if (err) 772 return err; 773 } 774 for (i = 0; i < 3; i++) { 775 err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, 776 EXT_CSD_ENH_SIZE_MULT+i, 777 (enh_size_mult >> (i*8)) & 0xFF); 778 if (err) 779 return err; 780 } 781 for (pidx = 0; pidx < 4; pidx++) { 782 for (i = 0; i < 3; i++) { 783 err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, 784 EXT_CSD_GP_SIZE_MULT+pidx*3+i, 785 (gp_size_mult[pidx] >> (i*8)) & 0xFF); 786 if (err) 787 return err; 788 } 789 } 790 err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, 791 EXT_CSD_PARTITIONS_ATTRIBUTE, part_attrs); 792 if (err) 793 return err; 794 795 if (mode == MMC_HWPART_CONF_SET) 796 return 0; 797 798 /* The WR_REL_SET is a write-once register but shall be 799 * written before setting PART_SETTING_COMPLETED. As it is 800 * write-once we can only write it when completing the 801 * partitioning. */ 802 if (wr_rel_set != ext_csd[EXT_CSD_WR_REL_SET]) { 803 err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, 804 EXT_CSD_WR_REL_SET, wr_rel_set); 805 if (err) 806 return err; 807 } 808 809 /* Setting PART_SETTING_COMPLETED confirms the partition 810 * configuration but it only becomes effective after power 811 * cycle, so we do not adjust the partition related settings 812 * in the mmc struct. */ 813 814 err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, 815 EXT_CSD_PARTITION_SETTING, 816 EXT_CSD_PARTITION_SETTING_COMPLETED); 817 if (err) 818 return err; 819 820 return 0; 821 } 822 823 int mmc_getcd(struct mmc *mmc) 824 { 825 int cd; 826 827 cd = board_mmc_getcd(mmc); 828 829 if (cd < 0) { 830 if (mmc->cfg->ops->getcd) 831 cd = mmc->cfg->ops->getcd(mmc); 832 else 833 cd = 1; 834 } 835 836 return cd; 837 } 838 839 static int sd_switch(struct mmc *mmc, int mode, int group, u8 value, u8 *resp) 840 { 841 struct mmc_cmd cmd; 842 struct mmc_data data; 843 844 /* Switch the frequency */ 845 cmd.cmdidx = SD_CMD_SWITCH_FUNC; 846 cmd.resp_type = MMC_RSP_R1; 847 cmd.cmdarg = (mode << 31) | 0xffffff; 848 cmd.cmdarg &= ~(0xf << (group * 4)); 849 cmd.cmdarg |= value << (group * 4); 850 851 data.dest = (char *)resp; 852 data.blocksize = 64; 853 data.blocks = 1; 854 data.flags = MMC_DATA_READ; 855 856 return mmc_send_cmd(mmc, &cmd, &data); 857 } 858 859 860 static int sd_change_freq(struct mmc *mmc) 861 { 862 int err; 863 struct mmc_cmd cmd; 864 ALLOC_CACHE_ALIGN_BUFFER(uint, scr, 2); 865 ALLOC_CACHE_ALIGN_BUFFER(uint, switch_status, 16); 866 struct mmc_data data; 867 int timeout; 868 869 mmc->card_caps = 0; 870 871 if (mmc_host_is_spi(mmc)) 872 return 0; 873 874 /* Read the SCR to find out if this card supports higher speeds */ 875 cmd.cmdidx = MMC_CMD_APP_CMD; 876 cmd.resp_type = MMC_RSP_R1; 877 cmd.cmdarg = mmc->rca << 16; 878 879 err = mmc_send_cmd(mmc, &cmd, NULL); 880 881 if (err) 882 return err; 883 884 cmd.cmdidx = SD_CMD_APP_SEND_SCR; 885 cmd.resp_type = MMC_RSP_R1; 886 cmd.cmdarg = 0; 887 888 timeout = 3; 889 890 retry_scr: 891 data.dest = (char *)scr; 892 data.blocksize = 8; 893 data.blocks = 1; 894 data.flags = MMC_DATA_READ; 895 896 err = mmc_send_cmd(mmc, &cmd, &data); 897 898 if (err) { 899 if (timeout--) 900 goto retry_scr; 901 902 return err; 903 } 904 905 mmc->scr[0] = __be32_to_cpu(scr[0]); 906 mmc->scr[1] = __be32_to_cpu(scr[1]); 907 908 switch ((mmc->scr[0] >> 24) & 0xf) { 909 case 0: 910 mmc->version = SD_VERSION_1_0; 911 break; 912 case 1: 913 mmc->version = SD_VERSION_1_10; 914 break; 915 case 2: 916 mmc->version = SD_VERSION_2; 917 if ((mmc->scr[0] >> 15) & 0x1) 918 mmc->version = SD_VERSION_3; 919 break; 920 default: 921 mmc->version = SD_VERSION_1_0; 922 break; 923 } 924 925 if (mmc->scr[0] & SD_DATA_4BIT) 926 mmc->card_caps |= MMC_MODE_4BIT; 927 928 /* Version 1.0 doesn't support switching */ 929 if (mmc->version == SD_VERSION_1_0) 930 return 0; 931 932 timeout = 4; 933 while (timeout--) { 934 err = sd_switch(mmc, SD_SWITCH_CHECK, 0, 1, 935 (u8 *)switch_status); 936 937 if (err) 938 return err; 939 940 /* The high-speed function is busy. Try again */ 941 if (!(__be32_to_cpu(switch_status[7]) & SD_HIGHSPEED_BUSY)) 942 break; 943 } 944 945 /* If high-speed isn't supported, we return */ 946 if (!(__be32_to_cpu(switch_status[3]) & SD_HIGHSPEED_SUPPORTED)) 947 return 0; 948 949 /* 950 * If the host doesn't support SD_HIGHSPEED, do not switch card to 951 * HIGHSPEED mode even if the card support SD_HIGHSPPED. 952 * This can avoid furthur problem when the card runs in different 953 * mode between the host. 954 */ 955 if (!((mmc->cfg->host_caps & MMC_MODE_HS_52MHz) && 956 (mmc->cfg->host_caps & MMC_MODE_HS))) 957 return 0; 958 959 err = sd_switch(mmc, SD_SWITCH_SWITCH, 0, 1, (u8 *)switch_status); 960 961 if (err) 962 return err; 963 964 if ((__be32_to_cpu(switch_status[4]) & 0x0f000000) == 0x01000000) 965 mmc->card_caps |= MMC_MODE_HS; 966 967 return 0; 968 } 969 970 /* frequency bases */ 971 /* divided by 10 to be nice to platforms without floating point */ 972 static const int fbase[] = { 973 10000, 974 100000, 975 1000000, 976 10000000, 977 }; 978 979 /* Multiplier values for TRAN_SPEED. Multiplied by 10 to be nice 980 * to platforms without floating point. 981 */ 982 static const int multipliers[] = { 983 0, /* reserved */ 984 10, 985 12, 986 13, 987 15, 988 20, 989 25, 990 30, 991 35, 992 40, 993 45, 994 50, 995 55, 996 60, 997 70, 998 80, 999 }; 1000 1001 static void mmc_set_ios(struct mmc *mmc) 1002 { 1003 if (mmc->cfg->ops->set_ios) 1004 mmc->cfg->ops->set_ios(mmc); 1005 } 1006 1007 void mmc_set_clock(struct mmc *mmc, uint clock) 1008 { 1009 if (clock > mmc->cfg->f_max) 1010 clock = mmc->cfg->f_max; 1011 1012 if (clock < mmc->cfg->f_min) 1013 clock = mmc->cfg->f_min; 1014 1015 mmc->clock = clock; 1016 1017 mmc_set_ios(mmc); 1018 } 1019 1020 static void mmc_set_bus_width(struct mmc *mmc, uint width) 1021 { 1022 mmc->bus_width = width; 1023 1024 mmc_set_ios(mmc); 1025 } 1026 1027 static int mmc_startup(struct mmc *mmc) 1028 { 1029 int err, i; 1030 uint mult, freq; 1031 u64 cmult, csize, capacity; 1032 struct mmc_cmd cmd; 1033 ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN); 1034 ALLOC_CACHE_ALIGN_BUFFER(u8, test_csd, MMC_MAX_BLOCK_LEN); 1035 int timeout = 1000; 1036 bool has_parts = false; 1037 bool part_completed; 1038 1039 #ifdef CONFIG_MMC_SPI_CRC_ON 1040 if (mmc_host_is_spi(mmc)) { /* enable CRC check for spi */ 1041 cmd.cmdidx = MMC_CMD_SPI_CRC_ON_OFF; 1042 cmd.resp_type = MMC_RSP_R1; 1043 cmd.cmdarg = 1; 1044 err = mmc_send_cmd(mmc, &cmd, NULL); 1045 1046 if (err) 1047 return err; 1048 } 1049 #endif 1050 1051 /* Put the Card in Identify Mode */ 1052 cmd.cmdidx = mmc_host_is_spi(mmc) ? MMC_CMD_SEND_CID : 1053 MMC_CMD_ALL_SEND_CID; /* cmd not supported in spi */ 1054 cmd.resp_type = MMC_RSP_R2; 1055 cmd.cmdarg = 0; 1056 1057 err = mmc_send_cmd(mmc, &cmd, NULL); 1058 1059 if (err) 1060 return err; 1061 1062 memcpy(mmc->cid, cmd.response, 16); 1063 1064 /* 1065 * For MMC cards, set the Relative Address. 1066 * For SD cards, get the Relatvie Address. 1067 * This also puts the cards into Standby State 1068 */ 1069 if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */ 1070 cmd.cmdidx = SD_CMD_SEND_RELATIVE_ADDR; 1071 cmd.cmdarg = mmc->rca << 16; 1072 cmd.resp_type = MMC_RSP_R6; 1073 1074 err = mmc_send_cmd(mmc, &cmd, NULL); 1075 1076 if (err) 1077 return err; 1078 1079 if (IS_SD(mmc)) 1080 mmc->rca = (cmd.response[0] >> 16) & 0xffff; 1081 } 1082 1083 /* Get the Card-Specific Data */ 1084 cmd.cmdidx = MMC_CMD_SEND_CSD; 1085 cmd.resp_type = MMC_RSP_R2; 1086 cmd.cmdarg = mmc->rca << 16; 1087 1088 err = mmc_send_cmd(mmc, &cmd, NULL); 1089 1090 /* Waiting for the ready status */ 1091 mmc_send_status(mmc, timeout); 1092 1093 if (err) 1094 return err; 1095 1096 mmc->csd[0] = cmd.response[0]; 1097 mmc->csd[1] = cmd.response[1]; 1098 mmc->csd[2] = cmd.response[2]; 1099 mmc->csd[3] = cmd.response[3]; 1100 1101 if (mmc->version == MMC_VERSION_UNKNOWN) { 1102 int version = (cmd.response[0] >> 26) & 0xf; 1103 1104 switch (version) { 1105 case 0: 1106 mmc->version = MMC_VERSION_1_2; 1107 break; 1108 case 1: 1109 mmc->version = MMC_VERSION_1_4; 1110 break; 1111 case 2: 1112 mmc->version = MMC_VERSION_2_2; 1113 break; 1114 case 3: 1115 mmc->version = MMC_VERSION_3; 1116 break; 1117 case 4: 1118 mmc->version = MMC_VERSION_4; 1119 break; 1120 default: 1121 mmc->version = MMC_VERSION_1_2; 1122 break; 1123 } 1124 } 1125 1126 /* divide frequency by 10, since the mults are 10x bigger */ 1127 freq = fbase[(cmd.response[0] & 0x7)]; 1128 mult = multipliers[((cmd.response[0] >> 3) & 0xf)]; 1129 1130 mmc->tran_speed = freq * mult; 1131 1132 mmc->dsr_imp = ((cmd.response[1] >> 12) & 0x1); 1133 mmc->read_bl_len = 1 << ((cmd.response[1] >> 16) & 0xf); 1134 1135 if (IS_SD(mmc)) 1136 mmc->write_bl_len = mmc->read_bl_len; 1137 else 1138 mmc->write_bl_len = 1 << ((cmd.response[3] >> 22) & 0xf); 1139 1140 if (mmc->high_capacity) { 1141 csize = (mmc->csd[1] & 0x3f) << 16 1142 | (mmc->csd[2] & 0xffff0000) >> 16; 1143 cmult = 8; 1144 } else { 1145 csize = (mmc->csd[1] & 0x3ff) << 2 1146 | (mmc->csd[2] & 0xc0000000) >> 30; 1147 cmult = (mmc->csd[2] & 0x00038000) >> 15; 1148 } 1149 1150 mmc->capacity_user = (csize + 1) << (cmult + 2); 1151 mmc->capacity_user *= mmc->read_bl_len; 1152 mmc->capacity_boot = 0; 1153 mmc->capacity_rpmb = 0; 1154 for (i = 0; i < 4; i++) 1155 mmc->capacity_gp[i] = 0; 1156 1157 if (mmc->read_bl_len > MMC_MAX_BLOCK_LEN) 1158 mmc->read_bl_len = MMC_MAX_BLOCK_LEN; 1159 1160 if (mmc->write_bl_len > MMC_MAX_BLOCK_LEN) 1161 mmc->write_bl_len = MMC_MAX_BLOCK_LEN; 1162 1163 if ((mmc->dsr_imp) && (0xffffffff != mmc->dsr)) { 1164 cmd.cmdidx = MMC_CMD_SET_DSR; 1165 cmd.cmdarg = (mmc->dsr & 0xffff) << 16; 1166 cmd.resp_type = MMC_RSP_NONE; 1167 if (mmc_send_cmd(mmc, &cmd, NULL)) 1168 printf("MMC: SET_DSR failed\n"); 1169 } 1170 1171 /* Select the card, and put it into Transfer Mode */ 1172 if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */ 1173 cmd.cmdidx = MMC_CMD_SELECT_CARD; 1174 cmd.resp_type = MMC_RSP_R1; 1175 cmd.cmdarg = mmc->rca << 16; 1176 err = mmc_send_cmd(mmc, &cmd, NULL); 1177 1178 if (err) 1179 return err; 1180 } 1181 1182 /* 1183 * For SD, its erase group is always one sector 1184 */ 1185 mmc->erase_grp_size = 1; 1186 mmc->part_config = MMCPART_NOAVAILABLE; 1187 if (!IS_SD(mmc) && (mmc->version >= MMC_VERSION_4)) { 1188 /* check ext_csd version and capacity */ 1189 err = mmc_send_ext_csd(mmc, ext_csd); 1190 if (err) 1191 return err; 1192 if (ext_csd[EXT_CSD_REV] >= 2) { 1193 /* 1194 * According to the JEDEC Standard, the value of 1195 * ext_csd's capacity is valid if the value is more 1196 * than 2GB 1197 */ 1198 capacity = ext_csd[EXT_CSD_SEC_CNT] << 0 1199 | ext_csd[EXT_CSD_SEC_CNT + 1] << 8 1200 | ext_csd[EXT_CSD_SEC_CNT + 2] << 16 1201 | ext_csd[EXT_CSD_SEC_CNT + 3] << 24; 1202 capacity *= MMC_MAX_BLOCK_LEN; 1203 if ((capacity >> 20) > 2 * 1024) 1204 mmc->capacity_user = capacity; 1205 } 1206 1207 switch (ext_csd[EXT_CSD_REV]) { 1208 case 1: 1209 mmc->version = MMC_VERSION_4_1; 1210 break; 1211 case 2: 1212 mmc->version = MMC_VERSION_4_2; 1213 break; 1214 case 3: 1215 mmc->version = MMC_VERSION_4_3; 1216 break; 1217 case 5: 1218 mmc->version = MMC_VERSION_4_41; 1219 break; 1220 case 6: 1221 mmc->version = MMC_VERSION_4_5; 1222 break; 1223 case 7: 1224 mmc->version = MMC_VERSION_5_0; 1225 break; 1226 } 1227 1228 /* The partition data may be non-zero but it is only 1229 * effective if PARTITION_SETTING_COMPLETED is set in 1230 * EXT_CSD, so ignore any data if this bit is not set, 1231 * except for enabling the high-capacity group size 1232 * definition (see below). */ 1233 part_completed = !!(ext_csd[EXT_CSD_PARTITION_SETTING] & 1234 EXT_CSD_PARTITION_SETTING_COMPLETED); 1235 1236 /* store the partition info of emmc */ 1237 mmc->part_support = ext_csd[EXT_CSD_PARTITIONING_SUPPORT]; 1238 if ((ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT) || 1239 ext_csd[EXT_CSD_BOOT_MULT]) 1240 mmc->part_config = ext_csd[EXT_CSD_PART_CONF]; 1241 if (part_completed && 1242 (ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & ENHNCD_SUPPORT)) 1243 mmc->part_attr = ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE]; 1244 1245 mmc->capacity_boot = ext_csd[EXT_CSD_BOOT_MULT] << 17; 1246 1247 mmc->capacity_rpmb = ext_csd[EXT_CSD_RPMB_MULT] << 17; 1248 1249 for (i = 0; i < 4; i++) { 1250 int idx = EXT_CSD_GP_SIZE_MULT + i * 3; 1251 uint mult = (ext_csd[idx + 2] << 16) + 1252 (ext_csd[idx + 1] << 8) + ext_csd[idx]; 1253 if (mult) 1254 has_parts = true; 1255 if (!part_completed) 1256 continue; 1257 mmc->capacity_gp[i] = mult; 1258 mmc->capacity_gp[i] *= 1259 ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]; 1260 mmc->capacity_gp[i] *= ext_csd[EXT_CSD_HC_WP_GRP_SIZE]; 1261 mmc->capacity_gp[i] <<= 19; 1262 } 1263 1264 if (part_completed) { 1265 mmc->enh_user_size = 1266 (ext_csd[EXT_CSD_ENH_SIZE_MULT+2] << 16) + 1267 (ext_csd[EXT_CSD_ENH_SIZE_MULT+1] << 8) + 1268 ext_csd[EXT_CSD_ENH_SIZE_MULT]; 1269 mmc->enh_user_size *= ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]; 1270 mmc->enh_user_size *= ext_csd[EXT_CSD_HC_WP_GRP_SIZE]; 1271 mmc->enh_user_size <<= 19; 1272 mmc->enh_user_start = 1273 (ext_csd[EXT_CSD_ENH_START_ADDR+3] << 24) + 1274 (ext_csd[EXT_CSD_ENH_START_ADDR+2] << 16) + 1275 (ext_csd[EXT_CSD_ENH_START_ADDR+1] << 8) + 1276 ext_csd[EXT_CSD_ENH_START_ADDR]; 1277 if (mmc->high_capacity) 1278 mmc->enh_user_start <<= 9; 1279 } 1280 1281 /* 1282 * Host needs to enable ERASE_GRP_DEF bit if device is 1283 * partitioned. This bit will be lost every time after a reset 1284 * or power off. This will affect erase size. 1285 */ 1286 if (part_completed) 1287 has_parts = true; 1288 if ((ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT) && 1289 (ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE] & PART_ENH_ATTRIB)) 1290 has_parts = true; 1291 if (has_parts) { 1292 err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, 1293 EXT_CSD_ERASE_GROUP_DEF, 1); 1294 1295 if (err) 1296 return err; 1297 else 1298 ext_csd[EXT_CSD_ERASE_GROUP_DEF] = 1; 1299 } 1300 1301 if (ext_csd[EXT_CSD_ERASE_GROUP_DEF] & 0x01) { 1302 /* Read out group size from ext_csd */ 1303 mmc->erase_grp_size = 1304 ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] * 1024; 1305 /* 1306 * if high capacity and partition setting completed 1307 * SEC_COUNT is valid even if it is smaller than 2 GiB 1308 * JEDEC Standard JESD84-B45, 6.2.4 1309 */ 1310 if (mmc->high_capacity && part_completed) { 1311 capacity = (ext_csd[EXT_CSD_SEC_CNT]) | 1312 (ext_csd[EXT_CSD_SEC_CNT + 1] << 8) | 1313 (ext_csd[EXT_CSD_SEC_CNT + 2] << 16) | 1314 (ext_csd[EXT_CSD_SEC_CNT + 3] << 24); 1315 capacity *= MMC_MAX_BLOCK_LEN; 1316 mmc->capacity_user = capacity; 1317 } 1318 } else { 1319 /* Calculate the group size from the csd value. */ 1320 int erase_gsz, erase_gmul; 1321 erase_gsz = (mmc->csd[2] & 0x00007c00) >> 10; 1322 erase_gmul = (mmc->csd[2] & 0x000003e0) >> 5; 1323 mmc->erase_grp_size = (erase_gsz + 1) 1324 * (erase_gmul + 1); 1325 } 1326 1327 mmc->hc_wp_grp_size = 1024 1328 * ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] 1329 * ext_csd[EXT_CSD_HC_WP_GRP_SIZE]; 1330 1331 mmc->wr_rel_set = ext_csd[EXT_CSD_WR_REL_SET]; 1332 } 1333 1334 err = mmc_set_capacity(mmc, mmc->block_dev.hwpart); 1335 if (err) 1336 return err; 1337 1338 if (IS_SD(mmc)) 1339 err = sd_change_freq(mmc); 1340 else 1341 err = mmc_change_freq(mmc); 1342 1343 if (err) 1344 return err; 1345 1346 /* Restrict card's capabilities by what the host can do */ 1347 mmc->card_caps &= mmc->cfg->host_caps; 1348 1349 if (IS_SD(mmc)) { 1350 if (mmc->card_caps & MMC_MODE_4BIT) { 1351 cmd.cmdidx = MMC_CMD_APP_CMD; 1352 cmd.resp_type = MMC_RSP_R1; 1353 cmd.cmdarg = mmc->rca << 16; 1354 1355 err = mmc_send_cmd(mmc, &cmd, NULL); 1356 if (err) 1357 return err; 1358 1359 cmd.cmdidx = SD_CMD_APP_SET_BUS_WIDTH; 1360 cmd.resp_type = MMC_RSP_R1; 1361 cmd.cmdarg = 2; 1362 err = mmc_send_cmd(mmc, &cmd, NULL); 1363 if (err) 1364 return err; 1365 1366 mmc_set_bus_width(mmc, 4); 1367 } 1368 1369 if (mmc->card_caps & MMC_MODE_HS) 1370 mmc->tran_speed = 50000000; 1371 else 1372 mmc->tran_speed = 25000000; 1373 } else if (mmc->version >= MMC_VERSION_4) { 1374 /* Only version 4 of MMC supports wider bus widths */ 1375 int idx; 1376 1377 /* An array of possible bus widths in order of preference */ 1378 static unsigned ext_csd_bits[] = { 1379 EXT_CSD_DDR_BUS_WIDTH_8, 1380 EXT_CSD_DDR_BUS_WIDTH_4, 1381 EXT_CSD_BUS_WIDTH_8, 1382 EXT_CSD_BUS_WIDTH_4, 1383 EXT_CSD_BUS_WIDTH_1, 1384 }; 1385 1386 /* An array to map CSD bus widths to host cap bits */ 1387 static unsigned ext_to_hostcaps[] = { 1388 [EXT_CSD_DDR_BUS_WIDTH_4] = 1389 MMC_MODE_DDR_52MHz | MMC_MODE_4BIT, 1390 [EXT_CSD_DDR_BUS_WIDTH_8] = 1391 MMC_MODE_DDR_52MHz | MMC_MODE_8BIT, 1392 [EXT_CSD_BUS_WIDTH_4] = MMC_MODE_4BIT, 1393 [EXT_CSD_BUS_WIDTH_8] = MMC_MODE_8BIT, 1394 }; 1395 1396 /* An array to map chosen bus width to an integer */ 1397 static unsigned widths[] = { 1398 8, 4, 8, 4, 1, 1399 }; 1400 1401 for (idx=0; idx < ARRAY_SIZE(ext_csd_bits); idx++) { 1402 unsigned int extw = ext_csd_bits[idx]; 1403 unsigned int caps = ext_to_hostcaps[extw]; 1404 1405 /* 1406 * If the bus width is still not changed, 1407 * don't try to set the default again. 1408 * Otherwise, recover from switch attempts 1409 * by switching to 1-bit bus width. 1410 */ 1411 if (extw == EXT_CSD_BUS_WIDTH_1 && 1412 mmc->bus_width == 1) { 1413 err = 0; 1414 break; 1415 } 1416 1417 /* 1418 * Check to make sure the card and controller support 1419 * these capabilities 1420 */ 1421 if ((mmc->card_caps & caps) != caps) 1422 continue; 1423 1424 err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, 1425 EXT_CSD_BUS_WIDTH, extw); 1426 1427 if (err) 1428 continue; 1429 1430 mmc->ddr_mode = (caps & MMC_MODE_DDR_52MHz) ? 1 : 0; 1431 mmc_set_bus_width(mmc, widths[idx]); 1432 1433 err = mmc_send_ext_csd(mmc, test_csd); 1434 1435 if (err) 1436 continue; 1437 1438 /* Only compare read only fields */ 1439 if (ext_csd[EXT_CSD_PARTITIONING_SUPPORT] 1440 == test_csd[EXT_CSD_PARTITIONING_SUPPORT] && 1441 ext_csd[EXT_CSD_HC_WP_GRP_SIZE] 1442 == test_csd[EXT_CSD_HC_WP_GRP_SIZE] && 1443 ext_csd[EXT_CSD_REV] 1444 == test_csd[EXT_CSD_REV] && 1445 ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] 1446 == test_csd[EXT_CSD_HC_ERASE_GRP_SIZE] && 1447 memcmp(&ext_csd[EXT_CSD_SEC_CNT], 1448 &test_csd[EXT_CSD_SEC_CNT], 4) == 0) 1449 break; 1450 else 1451 err = SWITCH_ERR; 1452 } 1453 1454 if (err) 1455 return err; 1456 1457 if (mmc->card_caps & MMC_MODE_HS) { 1458 if (mmc->card_caps & MMC_MODE_HS_52MHz) 1459 mmc->tran_speed = 52000000; 1460 else 1461 mmc->tran_speed = 26000000; 1462 } 1463 } 1464 1465 mmc_set_clock(mmc, mmc->tran_speed); 1466 1467 /* Fix the block length for DDR mode */ 1468 if (mmc->ddr_mode) { 1469 mmc->read_bl_len = MMC_MAX_BLOCK_LEN; 1470 mmc->write_bl_len = MMC_MAX_BLOCK_LEN; 1471 } 1472 1473 /* fill in device description */ 1474 mmc->block_dev.lun = 0; 1475 mmc->block_dev.hwpart = 0; 1476 mmc->block_dev.type = 0; 1477 mmc->block_dev.blksz = mmc->read_bl_len; 1478 mmc->block_dev.log2blksz = LOG2(mmc->block_dev.blksz); 1479 mmc->block_dev.lba = lldiv(mmc->capacity, mmc->read_bl_len); 1480 #if !defined(CONFIG_SPL_BUILD) || \ 1481 (defined(CONFIG_SPL_LIBCOMMON_SUPPORT) && \ 1482 !defined(CONFIG_USE_TINY_PRINTF)) 1483 sprintf(mmc->block_dev.vendor, "Man %06x Snr %04x%04x", 1484 mmc->cid[0] >> 24, (mmc->cid[2] & 0xffff), 1485 (mmc->cid[3] >> 16) & 0xffff); 1486 sprintf(mmc->block_dev.product, "%c%c%c%c%c%c", mmc->cid[0] & 0xff, 1487 (mmc->cid[1] >> 24), (mmc->cid[1] >> 16) & 0xff, 1488 (mmc->cid[1] >> 8) & 0xff, mmc->cid[1] & 0xff, 1489 (mmc->cid[2] >> 24) & 0xff); 1490 sprintf(mmc->block_dev.revision, "%d.%d", (mmc->cid[2] >> 20) & 0xf, 1491 (mmc->cid[2] >> 16) & 0xf); 1492 #else 1493 mmc->block_dev.vendor[0] = 0; 1494 mmc->block_dev.product[0] = 0; 1495 mmc->block_dev.revision[0] = 0; 1496 #endif 1497 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBDISK_SUPPORT) 1498 part_init(&mmc->block_dev); 1499 #endif 1500 1501 return 0; 1502 } 1503 1504 static int mmc_send_if_cond(struct mmc *mmc) 1505 { 1506 struct mmc_cmd cmd; 1507 int err; 1508 1509 cmd.cmdidx = SD_CMD_SEND_IF_COND; 1510 /* We set the bit if the host supports voltages between 2.7 and 3.6 V */ 1511 cmd.cmdarg = ((mmc->cfg->voltages & 0xff8000) != 0) << 8 | 0xaa; 1512 cmd.resp_type = MMC_RSP_R7; 1513 1514 err = mmc_send_cmd(mmc, &cmd, NULL); 1515 1516 if (err) 1517 return err; 1518 1519 if ((cmd.response[0] & 0xff) != 0xaa) 1520 return UNUSABLE_ERR; 1521 else 1522 mmc->version = SD_VERSION_2; 1523 1524 return 0; 1525 } 1526 1527 /* not used any more */ 1528 int __deprecated mmc_register(struct mmc *mmc) 1529 { 1530 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) 1531 printf("%s is deprecated! use mmc_create() instead.\n", __func__); 1532 #endif 1533 return -1; 1534 } 1535 1536 struct mmc *mmc_create(const struct mmc_config *cfg, void *priv) 1537 { 1538 struct mmc *mmc; 1539 1540 /* quick validation */ 1541 if (cfg == NULL || cfg->ops == NULL || cfg->ops->send_cmd == NULL || 1542 cfg->f_min == 0 || cfg->f_max == 0 || cfg->b_max == 0) 1543 return NULL; 1544 1545 mmc = calloc(1, sizeof(*mmc)); 1546 if (mmc == NULL) 1547 return NULL; 1548 1549 mmc->cfg = cfg; 1550 mmc->priv = priv; 1551 1552 /* the following chunk was mmc_register() */ 1553 1554 /* Setup dsr related values */ 1555 mmc->dsr_imp = 0; 1556 mmc->dsr = 0xffffffff; 1557 /* Setup the universal parts of the block interface just once */ 1558 mmc->block_dev.if_type = IF_TYPE_MMC; 1559 mmc->block_dev.devnum = cur_dev_num++; 1560 mmc->block_dev.removable = 1; 1561 mmc->block_dev.block_read = mmc_bread; 1562 mmc->block_dev.block_write = mmc_bwrite; 1563 mmc->block_dev.block_erase = mmc_berase; 1564 1565 /* setup initial part type */ 1566 mmc->block_dev.part_type = mmc->cfg->part_type; 1567 1568 INIT_LIST_HEAD(&mmc->link); 1569 1570 list_add_tail(&mmc->link, &mmc_devices); 1571 1572 return mmc; 1573 } 1574 1575 void mmc_destroy(struct mmc *mmc) 1576 { 1577 /* only freeing memory for now */ 1578 free(mmc); 1579 } 1580 1581 #ifdef CONFIG_PARTITIONS 1582 struct blk_desc *mmc_get_dev(int dev) 1583 { 1584 struct mmc *mmc = find_mmc_device(dev); 1585 if (!mmc || mmc_init(mmc)) 1586 return NULL; 1587 1588 return &mmc->block_dev; 1589 } 1590 #endif 1591 1592 /* board-specific MMC power initializations. */ 1593 __weak void board_mmc_power_init(void) 1594 { 1595 } 1596 1597 int mmc_start_init(struct mmc *mmc) 1598 { 1599 int err; 1600 1601 /* we pretend there's no card when init is NULL */ 1602 if (mmc_getcd(mmc) == 0 || mmc->cfg->ops->init == NULL) { 1603 mmc->has_init = 0; 1604 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) 1605 printf("MMC: no card present\n"); 1606 #endif 1607 return NO_CARD_ERR; 1608 } 1609 1610 if (mmc->has_init) 1611 return 0; 1612 1613 #ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT 1614 mmc_adapter_card_type_ident(); 1615 #endif 1616 board_mmc_power_init(); 1617 1618 /* made sure it's not NULL earlier */ 1619 err = mmc->cfg->ops->init(mmc); 1620 1621 if (err) 1622 return err; 1623 1624 mmc->ddr_mode = 0; 1625 mmc_set_bus_width(mmc, 1); 1626 mmc_set_clock(mmc, 1); 1627 1628 /* Reset the Card */ 1629 err = mmc_go_idle(mmc); 1630 1631 if (err) 1632 return err; 1633 1634 /* The internal partition reset to user partition(0) at every CMD0*/ 1635 mmc->block_dev.hwpart = 0; 1636 1637 /* Test for SD version 2 */ 1638 err = mmc_send_if_cond(mmc); 1639 1640 /* Now try to get the SD card's operating condition */ 1641 err = sd_send_op_cond(mmc); 1642 1643 /* If the command timed out, we check for an MMC card */ 1644 if (err == TIMEOUT) { 1645 err = mmc_send_op_cond(mmc); 1646 1647 if (err) { 1648 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) 1649 printf("Card did not respond to voltage select!\n"); 1650 #endif 1651 return UNUSABLE_ERR; 1652 } 1653 } 1654 1655 if (!err) 1656 mmc->init_in_progress = 1; 1657 1658 return err; 1659 } 1660 1661 static int mmc_complete_init(struct mmc *mmc) 1662 { 1663 int err = 0; 1664 1665 mmc->init_in_progress = 0; 1666 if (mmc->op_cond_pending) 1667 err = mmc_complete_op_cond(mmc); 1668 1669 if (!err) 1670 err = mmc_startup(mmc); 1671 if (err) 1672 mmc->has_init = 0; 1673 else 1674 mmc->has_init = 1; 1675 return err; 1676 } 1677 1678 int mmc_init(struct mmc *mmc) 1679 { 1680 int err = 0; 1681 unsigned start; 1682 1683 if (mmc->has_init) 1684 return 0; 1685 1686 start = get_timer(0); 1687 1688 if (!mmc->init_in_progress) 1689 err = mmc_start_init(mmc); 1690 1691 if (!err) 1692 err = mmc_complete_init(mmc); 1693 debug("%s: %d, time %lu\n", __func__, err, get_timer(start)); 1694 return err; 1695 } 1696 1697 int mmc_set_dsr(struct mmc *mmc, u16 val) 1698 { 1699 mmc->dsr = val; 1700 return 0; 1701 } 1702 1703 /* CPU-specific MMC initializations */ 1704 __weak int cpu_mmc_init(bd_t *bis) 1705 { 1706 return -1; 1707 } 1708 1709 /* board-specific MMC initializations. */ 1710 __weak int board_mmc_init(bd_t *bis) 1711 { 1712 return -1; 1713 } 1714 1715 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) 1716 1717 void print_mmc_devices(char separator) 1718 { 1719 struct mmc *m; 1720 struct list_head *entry; 1721 char *mmc_type; 1722 1723 list_for_each(entry, &mmc_devices) { 1724 m = list_entry(entry, struct mmc, link); 1725 1726 if (m->has_init) 1727 mmc_type = IS_SD(m) ? "SD" : "eMMC"; 1728 else 1729 mmc_type = NULL; 1730 1731 printf("%s: %d", m->cfg->name, m->block_dev.devnum); 1732 if (mmc_type) 1733 printf(" (%s)", mmc_type); 1734 1735 if (entry->next != &mmc_devices) { 1736 printf("%c", separator); 1737 if (separator != '\n') 1738 puts (" "); 1739 } 1740 } 1741 1742 printf("\n"); 1743 } 1744 1745 #else 1746 void print_mmc_devices(char separator) { } 1747 #endif 1748 1749 int get_mmc_num(void) 1750 { 1751 return cur_dev_num; 1752 } 1753 1754 void mmc_set_preinit(struct mmc *mmc, int preinit) 1755 { 1756 mmc->preinit = preinit; 1757 } 1758 1759 static void do_preinit(void) 1760 { 1761 struct mmc *m; 1762 struct list_head *entry; 1763 1764 list_for_each(entry, &mmc_devices) { 1765 m = list_entry(entry, struct mmc, link); 1766 1767 #ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT 1768 mmc_set_preinit(m, 1); 1769 #endif 1770 if (m->preinit) 1771 mmc_start_init(m); 1772 } 1773 } 1774 1775 #if defined(CONFIG_DM_MMC) && defined(CONFIG_SPL_BUILD) 1776 static int mmc_probe(bd_t *bis) 1777 { 1778 return 0; 1779 } 1780 #elif defined(CONFIG_DM_MMC) 1781 static int mmc_probe(bd_t *bis) 1782 { 1783 int ret, i; 1784 struct uclass *uc; 1785 struct udevice *dev; 1786 1787 ret = uclass_get(UCLASS_MMC, &uc); 1788 if (ret) 1789 return ret; 1790 1791 /* 1792 * Try to add them in sequence order. Really with driver model we 1793 * should allow holes, but the current MMC list does not allow that. 1794 * So if we request 0, 1, 3 we will get 0, 1, 2. 1795 */ 1796 for (i = 0; ; i++) { 1797 ret = uclass_get_device_by_seq(UCLASS_MMC, i, &dev); 1798 if (ret == -ENODEV) 1799 break; 1800 } 1801 uclass_foreach_dev(dev, uc) { 1802 ret = device_probe(dev); 1803 if (ret) 1804 printf("%s - probe failed: %d\n", dev->name, ret); 1805 } 1806 1807 return 0; 1808 } 1809 #else 1810 static int mmc_probe(bd_t *bis) 1811 { 1812 if (board_mmc_init(bis) < 0) 1813 cpu_mmc_init(bis); 1814 1815 return 0; 1816 } 1817 #endif 1818 1819 int mmc_initialize(bd_t *bis) 1820 { 1821 static int initialized = 0; 1822 int ret; 1823 if (initialized) /* Avoid initializing mmc multiple times */ 1824 return 0; 1825 initialized = 1; 1826 1827 INIT_LIST_HEAD (&mmc_devices); 1828 cur_dev_num = 0; 1829 1830 ret = mmc_probe(bis); 1831 if (ret) 1832 return ret; 1833 1834 #ifndef CONFIG_SPL_BUILD 1835 print_mmc_devices(','); 1836 #endif 1837 1838 do_preinit(); 1839 return 0; 1840 } 1841 1842 #ifdef CONFIG_SUPPORT_EMMC_BOOT 1843 /* 1844 * This function changes the size of boot partition and the size of rpmb 1845 * partition present on EMMC devices. 1846 * 1847 * Input Parameters: 1848 * struct *mmc: pointer for the mmc device strcuture 1849 * bootsize: size of boot partition 1850 * rpmbsize: size of rpmb partition 1851 * 1852 * Returns 0 on success. 1853 */ 1854 1855 int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize, 1856 unsigned long rpmbsize) 1857 { 1858 int err; 1859 struct mmc_cmd cmd; 1860 1861 /* Only use this command for raw EMMC moviNAND. Enter backdoor mode */ 1862 cmd.cmdidx = MMC_CMD_RES_MAN; 1863 cmd.resp_type = MMC_RSP_R1b; 1864 cmd.cmdarg = MMC_CMD62_ARG1; 1865 1866 err = mmc_send_cmd(mmc, &cmd, NULL); 1867 if (err) { 1868 debug("mmc_boot_partition_size_change: Error1 = %d\n", err); 1869 return err; 1870 } 1871 1872 /* Boot partition changing mode */ 1873 cmd.cmdidx = MMC_CMD_RES_MAN; 1874 cmd.resp_type = MMC_RSP_R1b; 1875 cmd.cmdarg = MMC_CMD62_ARG2; 1876 1877 err = mmc_send_cmd(mmc, &cmd, NULL); 1878 if (err) { 1879 debug("mmc_boot_partition_size_change: Error2 = %d\n", err); 1880 return err; 1881 } 1882 /* boot partition size is multiple of 128KB */ 1883 bootsize = (bootsize * 1024) / 128; 1884 1885 /* Arg: boot partition size */ 1886 cmd.cmdidx = MMC_CMD_RES_MAN; 1887 cmd.resp_type = MMC_RSP_R1b; 1888 cmd.cmdarg = bootsize; 1889 1890 err = mmc_send_cmd(mmc, &cmd, NULL); 1891 if (err) { 1892 debug("mmc_boot_partition_size_change: Error3 = %d\n", err); 1893 return err; 1894 } 1895 /* RPMB partition size is multiple of 128KB */ 1896 rpmbsize = (rpmbsize * 1024) / 128; 1897 /* Arg: RPMB partition size */ 1898 cmd.cmdidx = MMC_CMD_RES_MAN; 1899 cmd.resp_type = MMC_RSP_R1b; 1900 cmd.cmdarg = rpmbsize; 1901 1902 err = mmc_send_cmd(mmc, &cmd, NULL); 1903 if (err) { 1904 debug("mmc_boot_partition_size_change: Error4 = %d\n", err); 1905 return err; 1906 } 1907 return 0; 1908 } 1909 1910 /* 1911 * Modify EXT_CSD[177] which is BOOT_BUS_WIDTH 1912 * based on the passed in values for BOOT_BUS_WIDTH, RESET_BOOT_BUS_WIDTH 1913 * and BOOT_MODE. 1914 * 1915 * Returns 0 on success. 1916 */ 1917 int mmc_set_boot_bus_width(struct mmc *mmc, u8 width, u8 reset, u8 mode) 1918 { 1919 int err; 1920 1921 err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BOOT_BUS_WIDTH, 1922 EXT_CSD_BOOT_BUS_WIDTH_MODE(mode) | 1923 EXT_CSD_BOOT_BUS_WIDTH_RESET(reset) | 1924 EXT_CSD_BOOT_BUS_WIDTH_WIDTH(width)); 1925 1926 if (err) 1927 return err; 1928 return 0; 1929 } 1930 1931 /* 1932 * Modify EXT_CSD[179] which is PARTITION_CONFIG (formerly BOOT_CONFIG) 1933 * based on the passed in values for BOOT_ACK, BOOT_PARTITION_ENABLE and 1934 * PARTITION_ACCESS. 1935 * 1936 * Returns 0 on success. 1937 */ 1938 int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access) 1939 { 1940 int err; 1941 1942 err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_PART_CONF, 1943 EXT_CSD_BOOT_ACK(ack) | 1944 EXT_CSD_BOOT_PART_NUM(part_num) | 1945 EXT_CSD_PARTITION_ACCESS(access)); 1946 1947 if (err) 1948 return err; 1949 return 0; 1950 } 1951 1952 /* 1953 * Modify EXT_CSD[162] which is RST_n_FUNCTION based on the given value 1954 * for enable. Note that this is a write-once field for non-zero values. 1955 * 1956 * Returns 0 on success. 1957 */ 1958 int mmc_set_rst_n_function(struct mmc *mmc, u8 enable) 1959 { 1960 return mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_RST_N_FUNCTION, 1961 enable); 1962 } 1963 #endif 1964