1 /* 2 * Copyright 2007, 2010-2011 Freescale Semiconductor, Inc 3 * Andy Fleming 4 * 5 * Based vaguely on the pxa mmc code: 6 * (C) Copyright 2003 7 * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #include <config.h> 13 #include <common.h> 14 #include <command.h> 15 #include <hwconfig.h> 16 #include <mmc.h> 17 #include <part.h> 18 #include <malloc.h> 19 #include <mmc.h> 20 #include <fsl_esdhc.h> 21 #include <fdt_support.h> 22 #include <asm/io.h> 23 24 DECLARE_GLOBAL_DATA_PTR; 25 26 struct fsl_esdhc { 27 uint dsaddr; /* SDMA system address register */ 28 uint blkattr; /* Block attributes register */ 29 uint cmdarg; /* Command argument register */ 30 uint xfertyp; /* Transfer type register */ 31 uint cmdrsp0; /* Command response 0 register */ 32 uint cmdrsp1; /* Command response 1 register */ 33 uint cmdrsp2; /* Command response 2 register */ 34 uint cmdrsp3; /* Command response 3 register */ 35 uint datport; /* Buffer data port register */ 36 uint prsstat; /* Present state register */ 37 uint proctl; /* Protocol control register */ 38 uint sysctl; /* System Control Register */ 39 uint irqstat; /* Interrupt status register */ 40 uint irqstaten; /* Interrupt status enable register */ 41 uint irqsigen; /* Interrupt signal enable register */ 42 uint autoc12err; /* Auto CMD error status register */ 43 uint hostcapblt; /* Host controller capabilities register */ 44 uint wml; /* Watermark level register */ 45 uint mixctrl; /* For USDHC */ 46 char reserved1[4]; /* reserved */ 47 uint fevt; /* Force event register */ 48 uint admaes; /* ADMA error status register */ 49 uint adsaddr; /* ADMA system address register */ 50 char reserved2[160]; /* reserved */ 51 uint hostver; /* Host controller version register */ 52 char reserved3[4]; /* reserved */ 53 uint dmaerraddr; /* DMA error address register */ 54 char reserved4[4]; /* reserved */ 55 uint dmaerrattr; /* DMA error attribute register */ 56 char reserved5[4]; /* reserved */ 57 uint hostcapblt2; /* Host controller capabilities register 2 */ 58 char reserved6[8]; /* reserved */ 59 uint tcr; /* Tuning control register */ 60 char reserved7[28]; /* reserved */ 61 uint sddirctl; /* SD direction control register */ 62 char reserved8[712]; /* reserved */ 63 uint scr; /* eSDHC control register */ 64 }; 65 66 /* Return the XFERTYP flags for a given command and data packet */ 67 static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data) 68 { 69 uint xfertyp = 0; 70 71 if (data) { 72 xfertyp |= XFERTYP_DPSEL; 73 #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO 74 xfertyp |= XFERTYP_DMAEN; 75 #endif 76 if (data->blocks > 1) { 77 xfertyp |= XFERTYP_MSBSEL; 78 xfertyp |= XFERTYP_BCEN; 79 #ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC111 80 xfertyp |= XFERTYP_AC12EN; 81 #endif 82 } 83 84 if (data->flags & MMC_DATA_READ) 85 xfertyp |= XFERTYP_DTDSEL; 86 } 87 88 if (cmd->resp_type & MMC_RSP_CRC) 89 xfertyp |= XFERTYP_CCCEN; 90 if (cmd->resp_type & MMC_RSP_OPCODE) 91 xfertyp |= XFERTYP_CICEN; 92 if (cmd->resp_type & MMC_RSP_136) 93 xfertyp |= XFERTYP_RSPTYP_136; 94 else if (cmd->resp_type & MMC_RSP_BUSY) 95 xfertyp |= XFERTYP_RSPTYP_48_BUSY; 96 else if (cmd->resp_type & MMC_RSP_PRESENT) 97 xfertyp |= XFERTYP_RSPTYP_48; 98 99 #if defined(CONFIG_MX53) || defined(CONFIG_T4240QDS) 100 if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION) 101 xfertyp |= XFERTYP_CMDTYP_ABORT; 102 #endif 103 return XFERTYP_CMD(cmd->cmdidx) | xfertyp; 104 } 105 106 #ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO 107 /* 108 * PIO Read/Write Mode reduce the performace as DMA is not used in this mode. 109 */ 110 static void 111 esdhc_pio_read_write(struct mmc *mmc, struct mmc_data *data) 112 { 113 struct fsl_esdhc_cfg *cfg = mmc->priv; 114 struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base; 115 uint blocks; 116 char *buffer; 117 uint databuf; 118 uint size; 119 uint irqstat; 120 uint timeout; 121 122 if (data->flags & MMC_DATA_READ) { 123 blocks = data->blocks; 124 buffer = data->dest; 125 while (blocks) { 126 timeout = PIO_TIMEOUT; 127 size = data->blocksize; 128 irqstat = esdhc_read32(®s->irqstat); 129 while (!(esdhc_read32(®s->prsstat) & PRSSTAT_BREN) 130 && --timeout); 131 if (timeout <= 0) { 132 printf("\nData Read Failed in PIO Mode."); 133 return; 134 } 135 while (size && (!(irqstat & IRQSTAT_TC))) { 136 udelay(100); /* Wait before last byte transfer complete */ 137 irqstat = esdhc_read32(®s->irqstat); 138 databuf = in_le32(®s->datport); 139 *((uint *)buffer) = databuf; 140 buffer += 4; 141 size -= 4; 142 } 143 blocks--; 144 } 145 } else { 146 blocks = data->blocks; 147 buffer = (char *)data->src; 148 while (blocks) { 149 timeout = PIO_TIMEOUT; 150 size = data->blocksize; 151 irqstat = esdhc_read32(®s->irqstat); 152 while (!(esdhc_read32(®s->prsstat) & PRSSTAT_BWEN) 153 && --timeout); 154 if (timeout <= 0) { 155 printf("\nData Write Failed in PIO Mode."); 156 return; 157 } 158 while (size && (!(irqstat & IRQSTAT_TC))) { 159 udelay(100); /* Wait before last byte transfer complete */ 160 databuf = *((uint *)buffer); 161 buffer += 4; 162 size -= 4; 163 irqstat = esdhc_read32(®s->irqstat); 164 out_le32(®s->datport, databuf); 165 } 166 blocks--; 167 } 168 } 169 } 170 #endif 171 172 static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data) 173 { 174 int timeout; 175 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 176 struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base; 177 #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO 178 uint wml_value; 179 180 wml_value = data->blocksize/4; 181 182 if (data->flags & MMC_DATA_READ) { 183 if (wml_value > WML_RD_WML_MAX) 184 wml_value = WML_RD_WML_MAX_VAL; 185 186 esdhc_clrsetbits32(®s->wml, WML_RD_WML_MASK, wml_value); 187 esdhc_write32(®s->dsaddr, (u32)data->dest); 188 } else { 189 flush_dcache_range((ulong)data->src, 190 (ulong)data->src+data->blocks 191 *data->blocksize); 192 193 if (wml_value > WML_WR_WML_MAX) 194 wml_value = WML_WR_WML_MAX_VAL; 195 if ((esdhc_read32(®s->prsstat) & PRSSTAT_WPSPL) == 0) { 196 printf("\nThe SD card is locked. Can not write to a locked card.\n\n"); 197 return TIMEOUT; 198 } 199 200 esdhc_clrsetbits32(®s->wml, WML_WR_WML_MASK, 201 wml_value << 16); 202 esdhc_write32(®s->dsaddr, (u32)data->src); 203 } 204 #else /* CONFIG_SYS_FSL_ESDHC_USE_PIO */ 205 if (!(data->flags & MMC_DATA_READ)) { 206 if ((esdhc_read32(®s->prsstat) & PRSSTAT_WPSPL) == 0) { 207 printf("\nThe SD card is locked. " 208 "Can not write to a locked card.\n\n"); 209 return TIMEOUT; 210 } 211 esdhc_write32(®s->dsaddr, (u32)data->src); 212 } else 213 esdhc_write32(®s->dsaddr, (u32)data->dest); 214 #endif /* CONFIG_SYS_FSL_ESDHC_USE_PIO */ 215 216 esdhc_write32(®s->blkattr, data->blocks << 16 | data->blocksize); 217 218 /* Calculate the timeout period for data transactions */ 219 /* 220 * 1)Timeout period = (2^(timeout+13)) SD Clock cycles 221 * 2)Timeout period should be minimum 0.250sec as per SD Card spec 222 * So, Number of SD Clock cycles for 0.25sec should be minimum 223 * (SD Clock/sec * 0.25 sec) SD Clock cycles 224 * = (mmc->tran_speed * 1/4) SD Clock cycles 225 * As 1) >= 2) 226 * => (2^(timeout+13)) >= mmc->tran_speed * 1/4 227 * Taking log2 both the sides 228 * => timeout + 13 >= log2(mmc->tran_speed/4) 229 * Rounding up to next power of 2 230 * => timeout + 13 = log2(mmc->tran_speed/4) + 1 231 * => timeout + 13 = fls(mmc->tran_speed/4) 232 */ 233 timeout = fls(mmc->tran_speed/4); 234 timeout -= 13; 235 236 if (timeout > 14) 237 timeout = 14; 238 239 if (timeout < 0) 240 timeout = 0; 241 242 #ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC_A001 243 if ((timeout == 4) || (timeout == 8) || (timeout == 12)) 244 timeout++; 245 #endif 246 247 esdhc_clrsetbits32(®s->sysctl, SYSCTL_TIMEOUT_MASK, timeout << 16); 248 249 return 0; 250 } 251 252 static void check_and_invalidate_dcache_range 253 (struct mmc_cmd *cmd, 254 struct mmc_data *data) { 255 unsigned start = (unsigned)data->dest ; 256 unsigned size = roundup(ARCH_DMA_MINALIGN, 257 data->blocks*data->blocksize); 258 unsigned end = start+size ; 259 invalidate_dcache_range(start, end); 260 } 261 /* 262 * Sends a command out on the bus. Takes the mmc pointer, 263 * a command pointer, and an optional data pointer. 264 */ 265 static int 266 esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) 267 { 268 uint xfertyp; 269 uint irqstat; 270 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 271 volatile struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base; 272 273 #ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC111 274 if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION) 275 return 0; 276 #endif 277 278 esdhc_write32(®s->irqstat, -1); 279 280 sync(); 281 282 /* Wait for the bus to be idle */ 283 while ((esdhc_read32(®s->prsstat) & PRSSTAT_CICHB) || 284 (esdhc_read32(®s->prsstat) & PRSSTAT_CIDHB)) 285 ; 286 287 while (esdhc_read32(®s->prsstat) & PRSSTAT_DLA) 288 ; 289 290 /* Wait at least 8 SD clock cycles before the next command */ 291 /* 292 * Note: This is way more than 8 cycles, but 1ms seems to 293 * resolve timing issues with some cards 294 */ 295 udelay(1000); 296 297 /* Set up for a data transfer if we have one */ 298 if (data) { 299 int err; 300 301 err = esdhc_setup_data(mmc, data); 302 if(err) 303 return err; 304 } 305 306 /* Figure out the transfer arguments */ 307 xfertyp = esdhc_xfertyp(cmd, data); 308 309 /* Mask all irqs */ 310 esdhc_write32(®s->irqsigen, 0); 311 312 /* Send the command */ 313 esdhc_write32(®s->cmdarg, cmd->cmdarg); 314 #if defined(CONFIG_FSL_USDHC) 315 esdhc_write32(®s->mixctrl, 316 (esdhc_read32(®s->mixctrl) & 0xFFFFFF80) | (xfertyp & 0x7F)); 317 esdhc_write32(®s->xfertyp, xfertyp & 0xFFFF0000); 318 #else 319 esdhc_write32(®s->xfertyp, xfertyp); 320 #endif 321 322 /* Wait for the command to complete */ 323 while (!(esdhc_read32(®s->irqstat) & (IRQSTAT_CC | IRQSTAT_CTOE))) 324 ; 325 326 irqstat = esdhc_read32(®s->irqstat); 327 328 /* Reset CMD and DATA portions on error */ 329 if (irqstat & (CMD_ERR | IRQSTAT_CTOE)) { 330 esdhc_write32(®s->sysctl, esdhc_read32(®s->sysctl) | 331 SYSCTL_RSTC); 332 while (esdhc_read32(®s->sysctl) & SYSCTL_RSTC) 333 ; 334 335 if (data) { 336 esdhc_write32(®s->sysctl, 337 esdhc_read32(®s->sysctl) | 338 SYSCTL_RSTD); 339 while ((esdhc_read32(®s->sysctl) & SYSCTL_RSTD)) 340 ; 341 } 342 } 343 344 if (irqstat & CMD_ERR) 345 return COMM_ERR; 346 347 if (irqstat & IRQSTAT_CTOE) 348 return TIMEOUT; 349 350 /* Workaround for ESDHC errata ENGcm03648 */ 351 if (!data && (cmd->resp_type & MMC_RSP_BUSY)) { 352 int timeout = 2500; 353 354 /* Poll on DATA0 line for cmd with busy signal for 250 ms */ 355 while (timeout > 0 && !(esdhc_read32(®s->prsstat) & 356 PRSSTAT_DAT0)) { 357 udelay(100); 358 timeout--; 359 } 360 361 if (timeout <= 0) { 362 printf("Timeout waiting for DAT0 to go high!\n"); 363 return TIMEOUT; 364 } 365 } 366 367 /* Copy the response to the response buffer */ 368 if (cmd->resp_type & MMC_RSP_136) { 369 u32 cmdrsp3, cmdrsp2, cmdrsp1, cmdrsp0; 370 371 cmdrsp3 = esdhc_read32(®s->cmdrsp3); 372 cmdrsp2 = esdhc_read32(®s->cmdrsp2); 373 cmdrsp1 = esdhc_read32(®s->cmdrsp1); 374 cmdrsp0 = esdhc_read32(®s->cmdrsp0); 375 cmd->response[0] = (cmdrsp3 << 8) | (cmdrsp2 >> 24); 376 cmd->response[1] = (cmdrsp2 << 8) | (cmdrsp1 >> 24); 377 cmd->response[2] = (cmdrsp1 << 8) | (cmdrsp0 >> 24); 378 cmd->response[3] = (cmdrsp0 << 8); 379 } else 380 cmd->response[0] = esdhc_read32(®s->cmdrsp0); 381 382 /* Wait until all of the blocks are transferred */ 383 if (data) { 384 #ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO 385 esdhc_pio_read_write(mmc, data); 386 #else 387 do { 388 irqstat = esdhc_read32(®s->irqstat); 389 390 if (irqstat & IRQSTAT_DTOE) 391 return TIMEOUT; 392 393 if (irqstat & DATA_ERR) 394 return COMM_ERR; 395 } while ((irqstat & DATA_COMPLETE) != DATA_COMPLETE); 396 #endif 397 if (data->flags & MMC_DATA_READ) 398 check_and_invalidate_dcache_range(cmd, data); 399 } 400 401 esdhc_write32(®s->irqstat, -1); 402 403 return 0; 404 } 405 406 static void set_sysctl(struct mmc *mmc, uint clock) 407 { 408 int div, pre_div; 409 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 410 volatile struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base; 411 int sdhc_clk = cfg->sdhc_clk; 412 uint clk; 413 414 if (clock < mmc->f_min) 415 clock = mmc->f_min; 416 417 if (sdhc_clk / 16 > clock) { 418 for (pre_div = 2; pre_div < 256; pre_div *= 2) 419 if ((sdhc_clk / pre_div) <= (clock * 16)) 420 break; 421 } else 422 pre_div = 2; 423 424 for (div = 1; div <= 16; div++) 425 if ((sdhc_clk / (div * pre_div)) <= clock) 426 break; 427 428 pre_div >>= 1; 429 div -= 1; 430 431 clk = (pre_div << 8) | (div << 4); 432 433 esdhc_clrbits32(®s->sysctl, SYSCTL_CKEN); 434 435 esdhc_clrsetbits32(®s->sysctl, SYSCTL_CLOCK_MASK, clk); 436 437 udelay(10000); 438 439 clk = SYSCTL_PEREN | SYSCTL_CKEN; 440 441 esdhc_setbits32(®s->sysctl, clk); 442 } 443 444 static void esdhc_set_ios(struct mmc *mmc) 445 { 446 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 447 struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base; 448 449 /* Set the clock speed */ 450 set_sysctl(mmc, mmc->clock); 451 452 /* Set the bus width */ 453 esdhc_clrbits32(®s->proctl, PROCTL_DTW_4 | PROCTL_DTW_8); 454 455 if (mmc->bus_width == 4) 456 esdhc_setbits32(®s->proctl, PROCTL_DTW_4); 457 else if (mmc->bus_width == 8) 458 esdhc_setbits32(®s->proctl, PROCTL_DTW_8); 459 460 } 461 462 static int esdhc_init(struct mmc *mmc) 463 { 464 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 465 struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base; 466 int timeout = 1000; 467 468 /* Reset the entire host controller */ 469 esdhc_setbits32(®s->sysctl, SYSCTL_RSTA); 470 471 /* Wait until the controller is available */ 472 while ((esdhc_read32(®s->sysctl) & SYSCTL_RSTA) && --timeout) 473 udelay(1000); 474 475 #ifndef ARCH_MXC 476 /* Enable cache snooping */ 477 esdhc_write32(®s->scr, 0x00000040); 478 #endif 479 480 esdhc_setbits32(®s->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN); 481 482 /* Set the initial clock speed */ 483 mmc_set_clock(mmc, 400000); 484 485 /* Disable the BRR and BWR bits in IRQSTAT */ 486 esdhc_clrbits32(®s->irqstaten, IRQSTATEN_BRR | IRQSTATEN_BWR); 487 488 /* Put the PROCTL reg back to the default */ 489 esdhc_write32(®s->proctl, PROCTL_INIT); 490 491 /* Set timout to the maximum value */ 492 esdhc_clrsetbits32(®s->sysctl, SYSCTL_TIMEOUT_MASK, 14 << 16); 493 494 return 0; 495 } 496 497 static int esdhc_getcd(struct mmc *mmc) 498 { 499 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 500 struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base; 501 int timeout = 1000; 502 503 while (!(esdhc_read32(®s->prsstat) & PRSSTAT_CINS) && --timeout) 504 udelay(1000); 505 506 return timeout > 0; 507 } 508 509 static void esdhc_reset(struct fsl_esdhc *regs) 510 { 511 unsigned long timeout = 100; /* wait max 100 ms */ 512 513 /* reset the controller */ 514 esdhc_setbits32(®s->sysctl, SYSCTL_RSTA); 515 516 /* hardware clears the bit when it is done */ 517 while ((esdhc_read32(®s->sysctl) & SYSCTL_RSTA) && --timeout) 518 udelay(1000); 519 if (!timeout) 520 printf("MMC/SD: Reset never completed.\n"); 521 } 522 523 int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg) 524 { 525 struct fsl_esdhc *regs; 526 struct mmc *mmc; 527 u32 caps, voltage_caps; 528 529 if (!cfg) 530 return -1; 531 532 mmc = malloc(sizeof(struct mmc)); 533 if (!mmc) 534 return -ENOMEM; 535 536 memset(mmc, 0, sizeof(struct mmc)); 537 sprintf(mmc->name, "FSL_SDHC"); 538 regs = (struct fsl_esdhc *)cfg->esdhc_base; 539 540 /* First reset the eSDHC controller */ 541 esdhc_reset(regs); 542 543 esdhc_setbits32(®s->sysctl, SYSCTL_PEREN | SYSCTL_HCKEN 544 | SYSCTL_IPGEN | SYSCTL_CKEN); 545 546 mmc->priv = cfg; 547 mmc->send_cmd = esdhc_send_cmd; 548 mmc->set_ios = esdhc_set_ios; 549 mmc->init = esdhc_init; 550 mmc->getcd = esdhc_getcd; 551 mmc->getwp = NULL; 552 553 voltage_caps = 0; 554 caps = regs->hostcapblt; 555 556 #ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC135 557 caps = caps & ~(ESDHC_HOSTCAPBLT_SRS | 558 ESDHC_HOSTCAPBLT_VS18 | ESDHC_HOSTCAPBLT_VS30); 559 #endif 560 561 /* T4240 host controller capabilities register should have VS33 bit */ 562 #ifdef CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 563 caps = caps | ESDHC_HOSTCAPBLT_VS33; 564 #endif 565 566 if (caps & ESDHC_HOSTCAPBLT_VS18) 567 voltage_caps |= MMC_VDD_165_195; 568 if (caps & ESDHC_HOSTCAPBLT_VS30) 569 voltage_caps |= MMC_VDD_29_30 | MMC_VDD_30_31; 570 if (caps & ESDHC_HOSTCAPBLT_VS33) 571 voltage_caps |= MMC_VDD_32_33 | MMC_VDD_33_34; 572 573 #ifdef CONFIG_SYS_SD_VOLTAGE 574 mmc->voltages = CONFIG_SYS_SD_VOLTAGE; 575 #else 576 mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; 577 #endif 578 if ((mmc->voltages & voltage_caps) == 0) { 579 printf("voltage not supported by controller\n"); 580 return -1; 581 } 582 583 mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT | MMC_MODE_HC; 584 585 if (cfg->max_bus_width > 0) { 586 if (cfg->max_bus_width < 8) 587 mmc->host_caps &= ~MMC_MODE_8BIT; 588 if (cfg->max_bus_width < 4) 589 mmc->host_caps &= ~MMC_MODE_4BIT; 590 } 591 592 if (caps & ESDHC_HOSTCAPBLT_HSS) 593 mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; 594 595 mmc->f_min = 400000; 596 mmc->f_max = MIN(gd->arch.sdhc_clk, 52000000); 597 598 mmc->b_max = 0; 599 mmc_register(mmc); 600 601 return 0; 602 } 603 604 int fsl_esdhc_mmc_init(bd_t *bis) 605 { 606 struct fsl_esdhc_cfg *cfg; 607 608 cfg = calloc(sizeof(struct fsl_esdhc_cfg), 1); 609 cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR; 610 cfg->sdhc_clk = gd->arch.sdhc_clk; 611 return fsl_esdhc_initialize(bis, cfg); 612 } 613 614 #ifdef CONFIG_OF_LIBFDT 615 void fdt_fixup_esdhc(void *blob, bd_t *bd) 616 { 617 const char *compat = "fsl,esdhc"; 618 619 #ifdef CONFIG_FSL_ESDHC_PIN_MUX 620 if (!hwconfig("esdhc")) { 621 do_fixup_by_compat(blob, compat, "status", "disabled", 622 8 + 1, 1); 623 return; 624 } 625 #endif 626 627 do_fixup_by_compat_u32(blob, compat, "clock-frequency", 628 gd->arch.sdhc_clk, 1); 629 630 do_fixup_by_compat(blob, compat, "status", "okay", 631 4 + 1, 1); 632 } 633 #endif 634