1 /* 2 * (C) Copyright 2012 SAMSUNG Electronics 3 * Jaehoon Chung <jh80.chung@samsung.com> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #include <common.h> 9 #include <dwmmc.h> 10 #include <fdtdec.h> 11 #include <libfdt.h> 12 #include <malloc.h> 13 #include <errno.h> 14 #include <asm/arch/dwmmc.h> 15 #include <asm/arch/clk.h> 16 #include <asm/arch/pinmux.h> 17 #include <asm/arch/power.h> 18 #include <asm/gpio.h> 19 20 #define DWMMC_MAX_CH_NUM 4 21 #define DWMMC_MAX_FREQ 52000000 22 #define DWMMC_MIN_FREQ 400000 23 #define DWMMC_MMC0_SDR_TIMING_VAL 0x03030001 24 #define DWMMC_MMC2_SDR_TIMING_VAL 0x03020001 25 26 #ifdef CONFIG_DM_MMC 27 #include <dm.h> 28 DECLARE_GLOBAL_DATA_PTR; 29 30 struct exynos_mmc_plat { 31 struct mmc_config cfg; 32 struct mmc mmc; 33 }; 34 #endif 35 36 /* Exynos implmentation specific drver private data */ 37 struct dwmci_exynos_priv_data { 38 #ifdef CONFIG_DM_MMC 39 struct dwmci_host host; 40 #endif 41 u32 sdr_timing; 42 }; 43 44 /* 45 * Function used as callback function to initialise the 46 * CLKSEL register for every mmc channel. 47 */ 48 static void exynos_dwmci_clksel(struct dwmci_host *host) 49 { 50 struct dwmci_exynos_priv_data *priv = host->priv; 51 52 dwmci_writel(host, DWMCI_CLKSEL, priv->sdr_timing); 53 } 54 55 unsigned int exynos_dwmci_get_clk(struct dwmci_host *host, uint freq) 56 { 57 unsigned long sclk; 58 int8_t clk_div; 59 60 /* 61 * Since SDCLKIN is divided inside controller by the DIVRATIO 62 * value set in the CLKSEL register, we need to use the same output 63 * clock value to calculate the CLKDIV value. 64 * as per user manual:cclk_in = SDCLKIN / (DIVRATIO + 1) 65 */ 66 clk_div = ((dwmci_readl(host, DWMCI_CLKSEL) >> DWMCI_DIVRATIO_BIT) 67 & DWMCI_DIVRATIO_MASK) + 1; 68 sclk = get_mmc_clk(host->dev_index); 69 70 /* 71 * Assume to know divider value. 72 * When clock unit is broken, need to set "host->div" 73 */ 74 return sclk / clk_div / (host->div + 1); 75 } 76 77 static void exynos_dwmci_board_init(struct dwmci_host *host) 78 { 79 struct dwmci_exynos_priv_data *priv = host->priv; 80 81 if (host->quirks & DWMCI_QUIRK_DISABLE_SMU) { 82 dwmci_writel(host, EMMCP_MPSBEGIN0, 0); 83 dwmci_writel(host, EMMCP_SEND0, 0); 84 dwmci_writel(host, EMMCP_CTRL0, 85 MPSCTRL_SECURE_READ_BIT | 86 MPSCTRL_SECURE_WRITE_BIT | 87 MPSCTRL_NON_SECURE_READ_BIT | 88 MPSCTRL_NON_SECURE_WRITE_BIT | MPSCTRL_VALID); 89 } 90 91 /* Set to timing value at initial time */ 92 if (priv->sdr_timing) 93 exynos_dwmci_clksel(host); 94 } 95 96 static int exynos_dwmci_core_init(struct dwmci_host *host) 97 { 98 unsigned int div; 99 unsigned long freq, sclk; 100 101 if (host->bus_hz) 102 freq = host->bus_hz; 103 else 104 freq = DWMMC_MAX_FREQ; 105 106 /* request mmc clock vlaue of 52MHz. */ 107 sclk = get_mmc_clk(host->dev_index); 108 div = DIV_ROUND_UP(sclk, freq); 109 /* set the clock divisor for mmc */ 110 set_mmc_clk(host->dev_index, div); 111 112 host->name = "EXYNOS DWMMC"; 113 #ifdef CONFIG_EXYNOS5420 114 host->quirks = DWMCI_QUIRK_DISABLE_SMU; 115 #endif 116 host->board_init = exynos_dwmci_board_init; 117 118 host->caps = MMC_MODE_DDR_52MHz; 119 host->clksel = exynos_dwmci_clksel; 120 host->get_mmc_clk = exynos_dwmci_get_clk; 121 122 #ifndef CONFIG_DM_MMC 123 /* Add the mmc channel to be registered with mmc core */ 124 if (add_dwmci(host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ)) { 125 printf("DWMMC%d registration failed\n", host->dev_index); 126 return -1; 127 } 128 #endif 129 130 return 0; 131 } 132 133 static struct dwmci_host dwmci_host[DWMMC_MAX_CH_NUM]; 134 135 static int do_dwmci_init(struct dwmci_host *host) 136 { 137 int flag, err; 138 139 flag = host->buswidth == 8 ? PINMUX_FLAG_8BIT_MODE : PINMUX_FLAG_NONE; 140 err = exynos_pinmux_config(host->dev_id, flag); 141 if (err) { 142 printf("DWMMC%d not configure\n", host->dev_index); 143 return err; 144 } 145 146 return exynos_dwmci_core_init(host); 147 } 148 149 static int exynos_dwmci_get_config(const void *blob, int node, 150 struct dwmci_host *host) 151 { 152 int err = 0; 153 u32 base, timing[3]; 154 struct dwmci_exynos_priv_data *priv; 155 156 priv = malloc(sizeof(struct dwmci_exynos_priv_data)); 157 if (!priv) { 158 pr_err("dwmci_exynos_priv_data malloc fail!\n"); 159 return -ENOMEM; 160 } 161 162 /* Extract device id for each mmc channel */ 163 host->dev_id = pinmux_decode_periph_id(blob, node); 164 165 host->dev_index = fdtdec_get_int(blob, node, "index", host->dev_id); 166 if (host->dev_index == host->dev_id) 167 host->dev_index = host->dev_id - PERIPH_ID_SDMMC0; 168 169 if (host->dev_index > 4) { 170 printf("DWMMC%d: Can't get the dev index\n", host->dev_index); 171 return -EINVAL; 172 } 173 174 /* Get the bus width from the device node (Default is 4bit buswidth) */ 175 host->buswidth = fdtdec_get_int(blob, node, "samsung,bus-width", 4); 176 177 /* Set the base address from the device node */ 178 base = fdtdec_get_addr(blob, node, "reg"); 179 if (!base) { 180 printf("DWMMC%d: Can't get base address\n", host->dev_index); 181 return -EINVAL; 182 } 183 host->ioaddr = (void *)base; 184 185 /* Extract the timing info from the node */ 186 err = fdtdec_get_int_array(blob, node, "samsung,timing", timing, 3); 187 if (err) { 188 printf("DWMMC%d: Can't get sdr-timings for devider\n", 189 host->dev_index); 190 return -EINVAL; 191 } 192 193 priv->sdr_timing = (DWMCI_SET_SAMPLE_CLK(timing[0]) | 194 DWMCI_SET_DRV_CLK(timing[1]) | 195 DWMCI_SET_DIV_RATIO(timing[2])); 196 197 /* sdr_timing didn't assigned anything, use the default value */ 198 if (!priv->sdr_timing) { 199 if (host->dev_index == 0) 200 priv->sdr_timing = DWMMC_MMC0_SDR_TIMING_VAL; 201 else if (host->dev_index == 2) 202 priv->sdr_timing = DWMMC_MMC2_SDR_TIMING_VAL; 203 } 204 205 host->fifoth_val = fdtdec_get_int(blob, node, "fifoth_val", 0); 206 host->bus_hz = fdtdec_get_int(blob, node, "bus_hz", 0); 207 host->div = fdtdec_get_int(blob, node, "div", 0); 208 209 host->priv = priv; 210 211 return 0; 212 } 213 214 static int exynos_dwmci_process_node(const void *blob, 215 int node_list[], int count) 216 { 217 struct dwmci_host *host; 218 int i, node, err; 219 220 for (i = 0; i < count; i++) { 221 node = node_list[i]; 222 if (node <= 0) 223 continue; 224 host = &dwmci_host[i]; 225 err = exynos_dwmci_get_config(blob, node, host); 226 if (err) { 227 printf("%s: failed to decode dev %d\n", __func__, i); 228 return err; 229 } 230 231 do_dwmci_init(host); 232 } 233 return 0; 234 } 235 236 int exynos_dwmmc_init(const void *blob) 237 { 238 int node_list[DWMMC_MAX_CH_NUM]; 239 int boot_dev_node; 240 int err = 0, count; 241 242 count = fdtdec_find_aliases_for_id(blob, "mmc", 243 COMPAT_SAMSUNG_EXYNOS_DWMMC, node_list, 244 DWMMC_MAX_CH_NUM); 245 246 /* For DWMMC always set boot device as mmc 0 */ 247 if (count >= 3 && get_boot_mode() == BOOT_MODE_SD) { 248 boot_dev_node = node_list[2]; 249 node_list[2] = node_list[0]; 250 node_list[0] = boot_dev_node; 251 } 252 253 err = exynos_dwmci_process_node(blob, node_list, count); 254 255 return err; 256 } 257 258 #ifdef CONFIG_DM_MMC 259 static int exynos_dwmmc_probe(struct udevice *dev) 260 { 261 struct exynos_mmc_plat *plat = dev_get_platdata(dev); 262 struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); 263 struct dwmci_exynos_priv_data *priv = dev_get_priv(dev); 264 struct dwmci_host *host = &priv->host; 265 int err; 266 267 err = exynos_dwmci_get_config(gd->fdt_blob, dev_of_offset(dev), host); 268 if (err) 269 return err; 270 err = do_dwmci_init(host); 271 if (err) 272 return err; 273 274 dwmci_setup_cfg(&plat->cfg, host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ); 275 host->mmc = &plat->mmc; 276 host->mmc->priv = &priv->host; 277 host->priv = dev; 278 upriv->mmc = host->mmc; 279 280 return dwmci_probe(dev); 281 } 282 283 static int exynos_dwmmc_bind(struct udevice *dev) 284 { 285 struct exynos_mmc_plat *plat = dev_get_platdata(dev); 286 287 return dwmci_bind(dev, &plat->mmc, &plat->cfg); 288 } 289 290 static const struct udevice_id exynos_dwmmc_ids[] = { 291 { .compatible = "samsung,exynos4412-dw-mshc" }, 292 { } 293 }; 294 295 U_BOOT_DRIVER(exynos_dwmmc_drv) = { 296 .name = "exynos_dwmmc", 297 .id = UCLASS_MMC, 298 .of_match = exynos_dwmmc_ids, 299 .bind = exynos_dwmmc_bind, 300 .ops = &dm_dwmci_ops, 301 .probe = exynos_dwmmc_probe, 302 .priv_auto_alloc_size = sizeof(struct dwmci_exynos_priv_data), 303 .platdata_auto_alloc_size = sizeof(struct exynos_mmc_plat), 304 }; 305 #endif 306