1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * (C) Copyright 2016 Fuzhou Rockchip Electronics Co., Ltd 4 * 5 * Rockchip SD Host Controller Interface 6 */ 7 8 #include <common.h> 9 #include <dm.h> 10 #include <dt-structs.h> 11 #include <linux/libfdt.h> 12 #include <malloc.h> 13 #include <mapmem.h> 14 #include <sdhci.h> 15 #include <clk.h> 16 17 /* 400KHz is max freq for card ID etc. Use that as min */ 18 #define EMMC_MIN_FREQ 400000 19 20 struct aspeed_sdhci_plat { 21 struct mmc_config cfg; 22 struct mmc mmc; 23 unsigned int f_max; 24 }; 25 26 struct aspeed_sdhci_priv { 27 struct sdhci_host *host; 28 struct clk clk; 29 }; 30 31 static int aspeed_sdhci_probe(struct udevice *dev) 32 { 33 struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); 34 struct aspeed_sdhci_plat *plat = dev_get_platdata(dev); 35 struct aspeed_sdhci_priv *prv = dev_get_priv(dev); 36 struct sdhci_host *host = prv->host; 37 unsigned long clock; 38 struct clk clk; 39 int ret; 40 #ifndef CONFIG_SPL_BUILD 41 int node = dev_of_offset(dev); 42 #endif 43 44 ret = clk_get_by_index(dev, 0, &clk); 45 if (ret < 0) { 46 pr_debug("%s: Can't get clock for %s: %d\n", __func__, dev->name, 47 ret); 48 } 49 50 clock = clk_get_rate(&clk); 51 if (IS_ERR_VALUE(clock)) { 52 dev_err(dev, "failed to get clock\n"); 53 return ret; 54 } 55 56 debug("%s: CLK %ld\n", __func__, clock); 57 58 #ifndef CONFIG_SPL_BUILD 59 //1: sd card pwr, 0: no pwr 60 gpio_request_by_name_nodev(offset_to_ofnode(node), "pwr-gpios", 0, 61 &host->pwr_gpio, GPIOD_IS_OUT); 62 if (dm_gpio_is_valid(&host->pwr_gpio)) { 63 printf("\n"); 64 dm_gpio_set_value(&host->pwr_gpio, 1); 65 if (ret) { 66 debug("MMC not configured\n"); 67 return ret; 68 } 69 } 70 71 //1: 3.3v, 0: 1.8v 72 gpio_request_by_name_nodev(offset_to_ofnode(node), "pwr-sw-gpios", 0, 73 &host->pwr_sw_gpio, GPIOD_IS_OUT); 74 75 if (dm_gpio_is_valid(&host->pwr_sw_gpio)) { 76 dm_gpio_set_value(&host->pwr_sw_gpio, 1); 77 if (ret) { 78 debug("MMC not configured\n"); 79 return ret; 80 } 81 } 82 #endif 83 // host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD; 84 host->max_clk = clock; 85 86 host->bus_width = dev_read_u32_default(dev, "bus-width", 4); 87 88 if (host->bus_width == 8) 89 host->host_caps |= MMC_MODE_8BIT; 90 91 ret = sdhci_setup_cfg(&plat->cfg, host, host->max_clk, EMMC_MIN_FREQ); 92 93 host->mmc = &plat->mmc; 94 if (ret) 95 return ret; 96 host->mmc->priv = host; 97 host->mmc->dev = dev; 98 upriv->mmc = host->mmc; 99 100 return sdhci_probe(dev); 101 } 102 103 static int aspeed_sdhci_ofdata_to_platdata(struct udevice *dev) 104 { 105 struct aspeed_sdhci_priv *priv = dev_get_priv(dev); 106 107 priv->host = calloc(1, sizeof(struct sdhci_host)); 108 if (!priv->host) 109 return -1; 110 111 priv->host->name = dev->name; 112 priv->host->ioaddr = (void *)dev_read_addr(dev); 113 114 return 0; 115 } 116 117 static int aspeed_sdhci_bind(struct udevice *dev) 118 { 119 struct aspeed_sdhci_plat *plat = dev_get_platdata(dev); 120 121 return sdhci_bind(dev, &plat->mmc, &plat->cfg); 122 } 123 124 static const struct udevice_id aspeed_sdhci_ids[] = { 125 { .compatible = "aspeed,sdhci-ast2500" }, 126 { .compatible = "aspeed,sdhci-ast2600" }, 127 { .compatible = "aspeed,emmc-ast2600" }, 128 { } 129 }; 130 131 U_BOOT_DRIVER(aspeed_sdhci_drv) = { 132 .name = "aspeed_sdhci", 133 .id = UCLASS_MMC, 134 .of_match = aspeed_sdhci_ids, 135 .ofdata_to_platdata = aspeed_sdhci_ofdata_to_platdata, 136 .ops = &sdhci_ops, 137 .bind = aspeed_sdhci_bind, 138 .probe = aspeed_sdhci_probe, 139 .priv_auto_alloc_size = sizeof(struct aspeed_sdhci_priv), 140 .platdata_auto_alloc_size = sizeof(struct aspeed_sdhci_plat), 141 }; 142