xref: /openbmc/u-boot/drivers/mmc/arm_pl180_mmci.h (revision 1e52fea3)
1 /*
2  * ARM PrimeCell MultiMedia Card Interface - PL180
3  *
4  * Copyright (C) ST-Ericsson SA 2010
5  *
6  * Author: Ulf Hansson <ulf.hansson@stericsson.com>
7  * Author: Martin Lundholm <martin.xa.lundholm@stericsson.com>
8  * Ported to drivers/mmc/ by: Matt Waddel <matt.waddel@linaro.org>
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public License as
12  * published by the Free Software Foundation; either version 2 of
13  * the License, or (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23  * MA 02111-1307 USA
24  */
25 
26 #ifndef __ARM_PL180_MMCI_H__
27 #define __ARM_PL180_MMCI_H__
28 
29 int arm_pl180_mmci_init(void);
30 
31 #define COMMAND_REG_DELAY	300
32 #define DATA_REG_DELAY		1000
33 #define CLK_CHANGE_DELAY	2000
34 
35 #define INIT_PWR		0xBF /* Power on, full power, not open drain */
36 #define ARM_MCLK		(100*1000*1000)
37 
38 /* SDI Power Control register bits */
39 #define SDI_PWR_PWRCTRL_MASK	0x00000003
40 #define SDI_PWR_PWRCTRL_ON	0x00000003
41 #define SDI_PWR_PWRCTRL_OFF	0x00000000
42 #define SDI_PWR_DAT2DIREN	0x00000004
43 #define SDI_PWR_CMDDIREN	0x00000008
44 #define SDI_PWR_DAT0DIREN	0x00000010
45 #define SDI_PWR_DAT31DIREN	0x00000020
46 #define SDI_PWR_OPD		0x00000040
47 #define SDI_PWR_FBCLKEN		0x00000080
48 #define SDI_PWR_DAT74DIREN	0x00000100
49 #define SDI_PWR_RSTEN		0x00000200
50 
51 #define VOLTAGE_WINDOW_MMC	0x00FF8080
52 #define VOLTAGE_WINDOW_SD	0x80010000
53 
54 /* SDI clock control register bits */
55 #define SDI_CLKCR_CLKDIV_MASK	0x000000FF
56 #define SDI_CLKCR_CLKEN		0x00000100
57 #define SDI_CLKCR_PWRSAV	0x00000200
58 #define SDI_CLKCR_BYPASS	0x00000400
59 #define SDI_CLKCR_WIDBUS_MASK	0x00001800
60 #define SDI_CLKCR_WIDBUS_1	0x00000000
61 #define SDI_CLKCR_WIDBUS_4	0x00000800
62 
63 #define SDI_CLKCR_CLKDIV_INIT	0x000000C6 /* MCLK/(2*(0xC6+1)) => 505KHz */
64 
65 /* SDI command register bits */
66 #define SDI_CMD_CMDINDEX_MASK	0x000000FF
67 #define SDI_CMD_WAITRESP	0x00000040
68 #define SDI_CMD_LONGRESP	0x00000080
69 #define SDI_CMD_WAITINT		0x00000100
70 #define SDI_CMD_WAITPEND	0x00000200
71 #define SDI_CMD_CPSMEN		0x00000400
72 #define SDI_CMD_SDIOSUSPEND	0x00000800
73 #define SDI_CMD_ENDCMDCOMPL	0x00001000
74 #define SDI_CMD_NIEN		0x00002000
75 #define SDI_CMD_CE_ATACMD	0x00004000
76 #define SDI_CMD_CBOOTMODEEN	0x00008000
77 
78 #define SDI_DTIMER_DEFAULT	0xFFFF0000
79 
80 /* SDI Status register bits */
81 #define SDI_STA_CCRCFAIL	0x00000001
82 #define SDI_STA_DCRCFAIL	0x00000002
83 #define SDI_STA_CTIMEOUT	0x00000004
84 #define SDI_STA_DTIMEOUT	0x00000008
85 #define SDI_STA_TXUNDERR	0x00000010
86 #define SDI_STA_RXOVERR		0x00000020
87 #define SDI_STA_CMDREND		0x00000040
88 #define SDI_STA_CMDSENT		0x00000080
89 #define SDI_STA_DATAEND		0x00000100
90 #define SDI_STA_STBITERR	0x00000200
91 #define SDI_STA_DBCKEND		0x00000400
92 #define SDI_STA_CMDACT		0x00000800
93 #define SDI_STA_TXACT		0x00001000
94 #define SDI_STA_RXACT		0x00002000
95 #define SDI_STA_TXFIFOBW	0x00004000
96 #define SDI_STA_RXFIFOBR	0x00008000
97 #define SDI_STA_TXFIFOF		0x00010000
98 #define SDI_STA_RXFIFOF		0x00020000
99 #define SDI_STA_TXFIFOE		0x00040000
100 #define SDI_STA_RXFIFOE		0x00080000
101 #define SDI_STA_TXDAVL		0x00100000
102 #define SDI_STA_RXDAVL		0x00200000
103 #define SDI_STA_SDIOIT		0x00400000
104 #define SDI_STA_CEATAEND	0x00800000
105 #define SDI_STA_CARDBUSY	0x01000000
106 #define SDI_STA_BOOTMODE	0x02000000
107 #define SDI_STA_BOOTACKERR	0x04000000
108 #define SDI_STA_BOOTACKTIMEOUT	0x08000000
109 #define SDI_STA_RSTNEND		0x10000000
110 
111 /* SDI Interrupt Clear register bits */
112 #define SDI_ICR_MASK		0x1DC007FF
113 #define SDI_ICR_CCRCFAILC	0x00000001
114 #define SDI_ICR_DCRCFAILC	0x00000002
115 #define SDI_ICR_CTIMEOUTC	0x00000004
116 #define SDI_ICR_DTIMEOUTC	0x00000008
117 #define SDI_ICR_TXUNDERRC	0x00000010
118 #define SDI_ICR_RXOVERRC	0x00000020
119 #define SDI_ICR_CMDRENDC	0x00000040
120 #define SDI_ICR_CMDSENTC	0x00000080
121 #define SDI_ICR_DATAENDC	0x00000100
122 #define SDI_ICR_STBITERRC	0x00000200
123 #define SDI_ICR_DBCKENDC	0x00000400
124 #define SDI_ICR_SDIOITC		0x00400000
125 #define SDI_ICR_CEATAENDC	0x00800000
126 #define SDI_ICR_BUSYENDC	0x01000000
127 #define SDI_ICR_BOOTACKERRC	0x04000000
128 #define SDI_ICR_BOOTACKTIMEOUTC	0x08000000
129 #define SDI_ICR_RSTNENDC	0x10000000
130 
131 #define SDI_MASK0_MASK		0x1FFFFFFF
132 
133 /* SDI Data control register bits */
134 #define SDI_DCTRL_DTEN		0x00000001
135 #define SDI_DCTRL_DTDIR_IN	0x00000002
136 #define SDI_DCTRL_DTMODE_STREAM	0x00000004
137 #define SDI_DCTRL_DMAEN		0x00000008
138 #define SDI_DCTRL_DBLKSIZE_MASK	0x000000F0
139 #define SDI_DCTRL_RWSTART	0x00000100
140 #define SDI_DCTRL_RWSTOP	0x00000200
141 #define SDI_DCTRL_RWMOD		0x00000200
142 #define SDI_DCTRL_SDIOEN	0x00000800
143 #define SDI_DCTRL_DMAREQCTL	0x00001000
144 #define SDI_DCTRL_DBOOTMODEEN	0x00002000
145 #define SDI_DCTRL_BUSYMODE	0x00004000
146 #define SDI_DCTRL_DDR_MODE	0x00008000
147 
148 #define SDI_FIFO_BURST_SIZE	8
149 
150 struct sdi_registers {
151 	u32 power;		/* 0x00*/
152 	u32 clock;		/* 0x04*/
153 	u32 argument;		/* 0x08*/
154 	u32 command;		/* 0x0c*/
155 	u32 respcommand;	/* 0x10*/
156 	u32 response0;		/* 0x14*/
157 	u32 response1;		/* 0x18*/
158 	u32 response2;		/* 0x1c*/
159 	u32 response3;		/* 0x20*/
160 	u32 datatimer;		/* 0x24*/
161 	u32 datalength;		/* 0x28*/
162 	u32 datactrl;		/* 0x2c*/
163 	u32 datacount;		/* 0x30*/
164 	u32 status;		/* 0x34*/
165 	u32 status_clear;	/* 0x38*/
166 	u32 mask0;		/* 0x3c*/
167 	u32 mask1;		/* 0x40*/
168 	u32 card_select;	/* 0x44*/
169 	u32 fifo_count;		/* 0x48*/
170 	u32 padding1[(0x80-0x4C)>>2];
171 	u32 fifo;		/* 0x80*/
172 	u32 padding2[(0xFE0-0x84)>>2];
173 	u32 periph_id0;		/* 0xFE0 mmc Peripheral Identifcation Register*/
174 	u32 periph_id1;		/* 0xFE4*/
175 	u32 periph_id2;		/* 0xFE8*/
176 	u32 periph_id3;		/* 0xFEC*/
177 	u32 pcell_id0;		/* 0xFF0*/
178 	u32 pcell_id1;		/* 0xFF4*/
179 	u32 pcell_id2;		/* 0xFF8*/
180 	u32 pcell_id3;		/* 0xFFC*/
181 };
182 
183 #endif
184