1menu "MMC Host controller Support" 2 3config MMC 4 bool "MMC/SD/SDIO card support" 5 default ARM || PPC || SANDBOX 6 select HAVE_BLOCK_DEVICE 7 help 8 This selects MultiMediaCard, Secure Digital and Secure 9 Digital I/O support. 10 11 If you want MMC/SD/SDIO support, you should say Y here and 12 also to your specific host controller driver. 13 14config MMC_WRITE 15 bool "support for MMC/SD write operations" 16 depends on MMC 17 default y 18 help 19 Enable write access to MMC and SD Cards 20 21config MMC_BROKEN_CD 22 bool "Poll for broken card detection case" 23 help 24 If card detection feature is broken, just poll to detect. 25 26config DM_MMC 27 bool "Enable MMC controllers using Driver Model" 28 depends on DM 29 help 30 This enables the MultiMediaCard (MMC) uclass which supports MMC and 31 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.) 32 and non-removable (e.g. eMMC chip) devices are supported. These 33 appear as block devices in U-Boot and can support filesystems such 34 as EXT4 and FAT. 35 36config SPL_DM_MMC 37 bool "Enable MMC controllers using Driver Model in SPL" 38 depends on SPL_DM && DM_MMC 39 default y 40 help 41 This enables the MultiMediaCard (MMC) uclass which supports MMC and 42 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.) 43 and non-removable (e.g. eMMC chip) devices are supported. These 44 appear as block devices in U-Boot and can support filesystems such 45 as EXT4 and FAT. 46 47if MMC 48 49config ARM_PL180_MMCI 50 bool "ARM AMBA Multimedia Card Interface and compatible support" 51 depends on DM_MMC && OF_CONTROL 52 help 53 This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card 54 Interface (PL180, PL181 and compatible) support. 55 If you have an ARM(R) platform with a Multimedia Card slot, 56 say Y or M here. 57 58config MMC_QUIRKS 59 bool "Enable quirks" 60 default y 61 help 62 Some cards and hosts may sometimes behave unexpectedly (quirks). 63 This option enable workarounds to handle those quirks. Some of them 64 are enabled by default, other may require additionnal flags or are 65 enabled by the host driver. 66 67config MMC_HW_PARTITIONING 68 bool "Support for HW partitioning command(eMMC)" 69 default y 70 help 71 This adds a command and an API to do hardware partitioning on eMMC 72 devices. 73 74config MMC_IO_VOLTAGE 75 bool "Support IO voltage configuration" 76 help 77 IO voltage configuration allows selecting the voltage level of the IO 78 lines (not the level of main supply). This is required for UHS 79 support. For eMMC this not mandatory, but not enabling this option may 80 prevent the driver of using the faster modes. 81 82config SPL_MMC_IO_VOLTAGE 83 bool "Support IO voltage configuration in SPL" 84 default n 85 help 86 IO voltage configuration allows selecting the voltage level of the IO 87 lines (not the level of main supply). This is required for UHS 88 support. For eMMC this not mandatory, but not enabling this option may 89 prevent the driver of using the faster modes. 90 91config MMC_UHS_SUPPORT 92 bool "enable UHS support" 93 depends on MMC_IO_VOLTAGE 94 help 95 The Ultra High Speed (UHS) bus is available on some SDHC and SDXC 96 cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus 97 frequency can go up to 208MHz (SDR104) 98 99config SPL_MMC_UHS_SUPPORT 100 bool "enable UHS support in SPL" 101 depends on SPL_MMC_IO_VOLTAGE 102 help 103 The Ultra High Speed (UHS) bus is available on some SDHC and SDXC 104 cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus 105 frequency can go up to 208MHz (SDR104) 106 107config MMC_HS200_SUPPORT 108 bool "enable HS200 support" 109 help 110 The HS200 mode is support by some eMMC. The bus frequency is up to 111 200MHz. This mode requires tuning the IO. 112 113 114config SPL_MMC_HS200_SUPPORT 115 bool "enable HS200 support in SPL" 116 help 117 The HS200 mode is support by some eMMC. The bus frequency is up to 118 200MHz. This mode requires tuning the IO. 119 120config MMC_VERBOSE 121 bool "Output more information about the MMC" 122 default y 123 help 124 Enable the output of more information about the card such as the 125 operating mode. 126 127config SPL_MMC_TINY 128 bool "Tiny MMC framework in SPL" 129 help 130 Enable MMC framework tinification support. This option is useful if 131 if your SPL is extremely size constrained. Heed the warning, enable 132 this option if and only if you know exactly what you are doing, if 133 you are reading this help text, you most likely have no idea :-) 134 135 The MMC framework is reduced to bare minimum to be useful. No malloc 136 support is needed for the MMC framework operation with this option 137 enabled. The framework supports exactly one MMC device and exactly 138 one MMC driver. The MMC driver can be adjusted to avoid any malloc 139 operations too, which can remove the need for malloc support in SPL 140 and thus further reduce footprint. 141 142config MMC_DAVINCI 143 bool "TI DAVINCI Multimedia Card Interface support" 144 depends on ARCH_DAVINCI 145 default y 146 help 147 This selects the TI DAVINCI Multimedia card Interface. 148 If you have an DAVINCI board with a Multimedia Card slot, 149 say Y here. If unsure, say N. 150 151config MMC_DW 152 bool "Synopsys DesignWare Memory Card Interface" 153 help 154 This selects support for the Synopsys DesignWare Mobile Storage IP 155 block, this provides host support for SD and MMC interfaces, in both 156 PIO, internal DMA mode and external DMA mode. 157 158config MMC_DW_EXYNOS 159 bool "Exynos specific extensions for Synopsys DW Memory Card Interface" 160 depends on ARCH_EXYNOS 161 depends on MMC_DW 162 default y 163 help 164 This selects support for Samsung Exynos SoC specific extensions to the 165 Synopsys DesignWare Memory Card Interface driver. Select this option 166 for platforms based on Exynos4 and Exynos5 SoC's. 167 168config MMC_DW_K3 169 bool "K3 specific extensions for Synopsys DW Memory Card Interface" 170 depends on MMC_DW 171 help 172 This selects support for Hisilicon K3 SoC specific extensions to the 173 Synopsys DesignWare Memory Card Interface driver. Select this option 174 for platforms based on Hisilicon K3 SoC's. 175 176config MMC_DW_ROCKCHIP 177 bool "Rockchip SD/MMC controller support" 178 depends on DM_MMC && OF_CONTROL 179 depends on MMC_DW 180 help 181 This enables support for the Rockchip SD/MMM controller, which is 182 based on Designware IP. The device is compatible with at least 183 SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well 184 as removeable SD and micro-SD cards. 185 186config MMC_DW_SOCFPGA 187 bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface" 188 depends on ARCH_SOCFPGA 189 depends on MMC_DW 190 default y 191 help 192 This selects support for Altera SOCFPGA specific extensions to the 193 Synopsys DesignWare Memory Card Interface driver. Select this option 194 for platforms based on Altera SOCFPGA. 195 196config MMC_MESON_GX 197 bool "Meson GX EMMC controller support" 198 depends on DM_MMC && BLK && ARCH_MESON 199 help 200 Support for EMMC host controller on Meson GX ARM SoCs platform (S905) 201 202config MMC_MXC 203 bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support" 204 help 205 This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x 206 Multimedia Card Interface. If you have an i.MX or MPC512x platform 207 with a Multimedia Card slot, say Y here. 208 209 If unsure, say N. 210 211config MMC_MXS 212 bool "Freescale MXS Multimedia Card Interface support" 213 depends on MX23 || MX28 || MX6 || MX7 214 select APBH_DMA 215 select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7 216 select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7 217 help 218 This selects the Freescale SSP MMC controller found on MXS based 219 platforms like mx23/28. 220 221 If unsure, say N. 222 223config MMC_PCI 224 bool "Support for MMC controllers on PCI" 225 help 226 This selects PCI-based MMC controllers. 227 If you have an MMC controller on a PCI bus, say Y here. 228 229 If unsure, say N. 230 231config MMC_OMAP_HS 232 bool "TI OMAP High Speed Multimedia Card Interface support" 233 select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR 234 select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR 235 help 236 This selects the TI OMAP High Speed Multimedia card Interface. 237 If you have an omap2plus board with a Multimedia Card slot, 238 say Y here. 239 240 If unsure, say N. 241 242config MMC_OMAP_HS_ADMA 243 bool "ADMA support for OMAP HS MMC" 244 depends on MMC_OMAP_HS && !OMAP34XX 245 default y if !AM33XX 246 help 247 This enables support for the ADMA2 controller (SDA3.00 Part A2 DMA 248 controller). If supported by the hardware, selecting this option will 249 increase performances. 250 251config MMC_OMAP36XX_PINS 252 bool "Enable MMC1 on OMAP36xx/37xx" 253 depends on OMAP34XX && MMC_OMAP_HS 254 help 255 This enables extended-drain in the MMC/SD/SDIO1I/O and 256 GPIO-associated I/O cells (gpio_126, gpio_127, and gpio_129) 257 specific to the OMAP36xx/37xx using MMC1 258 259 If you have a controller with this interface, say Y here. 260 261 If unsure, say N. 262 263config SH_SDHI 264 bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support" 265 depends on ARCH_RMOBILE 266 help 267 Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform 268 269config MMC_UNIPHIER 270 bool "UniPhier/RCar SD/MMC Host Controller support" 271 depends on ARCH_UNIPHIER || ARCH_RMOBILE 272 depends on BLK && DM_MMC 273 depends on OF_CONTROL 274 help 275 This selects support for the Matsushita SD/MMC Host Controller on 276 SocioNext UniPhier and Renesas RCar SoCs. 277 278config MMC_BCM2835 279 bool "BCM2835 family custom SD/MMC Host Controller support" 280 depends on ARCH_BCM283X 281 depends on BLK && DM_MMC 282 depends on OF_CONTROL 283 default y 284 help 285 This selects support for the custom SD host controller in the BCM2835 286 family of devices. 287 288 If you have a BCM2835 platform with SD or MMC devices, say Y here. 289 290 If unsure, say N. 291 292config MMC_SANDBOX 293 bool "Sandbox MMC support" 294 depends on SANDBOX 295 depends on BLK && DM_MMC && OF_CONTROL 296 help 297 This select a dummy sandbox MMC driver. At present this does nothing 298 other than allow sandbox to be build with MMC support. This 299 improves build coverage for sandbox and makes it easier to detect 300 MMC build errors with sandbox. 301 302config MMC_SDHCI 303 bool "Secure Digital Host Controller Interface support" 304 help 305 This selects the generic Secure Digital Host Controller Interface. 306 It is used by manufacturers such as Texas Instruments(R), Ricoh(R) 307 and Toshiba(R). Most controllers found in laptops are of this type. 308 309 If you have a controller with this interface, say Y here. 310 311 If unsure, say N. 312 313config MMC_SDHCI_IO_ACCESSORS 314 bool 315 depends on MMC_SDHCI 316 help 317 This is silent Kconfig symbol that is selected by the drivers that 318 need to overwrite SDHCI IO memory accessors. 319 320config MMC_SDHCI_SDMA 321 bool "Support SDHCI SDMA" 322 depends on MMC_SDHCI 323 help 324 This enables support for the SDMA (Single Operation DMA) defined 325 in the SD Host Controller Standard Specification Version 1.00 . 326 327config MMC_SDHCI_ATMEL 328 bool "Atmel SDHCI controller support" 329 depends on ARCH_AT91 330 depends on DM_MMC && BLK && ARCH_AT91 331 depends on MMC_SDHCI 332 help 333 This enables support for the Atmel SDHCI controller, which supports 334 the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD 335 Memory Card Specification V3.0, and the SDIO V3.0 specification. 336 It is compliant with the SD Host Controller Standard V3.0 337 specification. 338 339config MMC_SDHCI_BCM2835 340 tristate "SDHCI support for the BCM2835 SD/MMC Controller" 341 depends on ARCH_BCM283X 342 depends on MMC_SDHCI 343 select MMC_SDHCI_IO_ACCESSORS 344 help 345 This selects the BCM2835 SD/MMC controller. 346 347 If you have a BCM2835 platform with SD or MMC devices, 348 say Y here. 349 350 If unsure, say N. 351 352config MMC_SDHCI_CADENCE 353 bool "SDHCI support for the Cadence SD/SDIO/eMMC controller" 354 depends on BLK && DM_MMC 355 depends on MMC_SDHCI 356 depends on OF_CONTROL 357 help 358 This selects the Cadence SD/SDIO/eMMC driver. 359 360 If you have a controller with this interface, say Y here. 361 362 If unsure, say N. 363 364config MMC_SDHCI_KONA 365 bool "SDHCI support on Broadcom KONA platform" 366 depends on MMC_SDHCI 367 help 368 This selects the Broadcom Kona Secure Digital Host Controller 369 Interface(SDHCI) support. 370 This is used in Broadcom mobile SoCs. 371 372 If you have a controller with this interface, say Y here. 373 374config MMC_SDHCI_MSM 375 bool "Qualcomm SDHCI controller" 376 depends on BLK && DM_MMC 377 depends on MMC_SDHCI 378 help 379 Enables support for SDHCI 2.0 controller present on some Qualcomm 380 Snapdragon devices. This device is compatible with eMMC v4.5 and 381 SD 3.0 specifications. Both SD and eMMC devices are supported. 382 Card-detect gpios are not supported. 383 384config MMC_SDHCI_MV 385 bool "SDHCI support on Marvell platform" 386 depends on ARCH_MVEBU 387 depends on MMC_SDHCI 388 help 389 This selects the Secure Digital Host Controller Interface on 390 Marvell platform. 391 392 If you have a controller with this interface, say Y here. 393 394 If unsure, say N. 395 396config MMC_SDHCI_PIC32 397 bool "Microchip PIC32 on-chip SDHCI support" 398 depends on DM_MMC && MACH_PIC32 399 depends on MMC_SDHCI 400 help 401 Support for Microchip PIC32 SDHCI controller. 402 403config MMC_SDHCI_ROCKCHIP 404 bool "Arasan SDHCI controller for Rockchip support" 405 depends on ARCH_ROCKCHIP 406 depends on DM_MMC && BLK 407 depends on MMC_SDHCI 408 help 409 Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform 410 411config MMC_SDHCI_S5P 412 bool "SDHCI support on Samsung S5P SoC" 413 depends on MMC_SDHCI 414 help 415 This selects the Secure Digital Host Controller Interface (SDHCI) 416 on Samsung S5P SoCs. 417 418 If you have a controller with this interface, say Y here. 419 420 If unsure, say N. 421 422config MMC_SDHCI_SPEAR 423 bool "SDHCI support on ST SPEAr platform" 424 depends on MMC_SDHCI 425 help 426 This selects the Secure Digital Host Controller Interface (SDHCI) 427 often referrered to as the HSMMC block in some of the ST SPEAR range 428 of SoC 429 430 If you have a controller with this interface, say Y here. 431 432 If unsure, say N. 433 434config MMC_SDHCI_STI 435 bool "SDHCI support for STMicroelectronics SoC" 436 depends on MMC_SDHCI && OF_CONTROL 437 help 438 This selects the Secure Digital Host Controller Interface (SDHCI) 439 on STMicroelectronics STiH410 SoC. 440 441config MMC_SDHCI_XENON 442 bool "SDHCI support for the Xenon SDHCI controller" 443 depends on MMC_SDHCI && DM_MMC && OF_CONTROL 444 help 445 Support for Xenon SDHCI host controller on Marvell Armada 3700 446 7k/8k ARM SoCs platforms 447 448 If you have a controller with this interface, say Y here. 449 450 If unsure, say N. 451 452config MMC_SDHCI_TANGIER 453 bool "Tangier SDHCI controller support" 454 depends on DM_MMC && BLK 455 depends on MMC_SDHCI 456 help 457 This selects support for SDHCI controller on Tanginer 458 SoC. Note that this controller does not sit on PCI bus and, 459 hence, cannot be enumerated by standard PCI means. 460 461 If you're using an Intel Tangier SoC (available on Intel 462 Edison board), say Y here. 463 464 If unsure, say N. 465 466config MMC_SDHCI_TEGRA 467 bool "SDHCI platform support for the Tegra SD/MMC Controller" 468 depends on TEGRA 469 default y 470 help 471 This selects the Tegra SD/MMC controller. If you have a Tegra 472 platform with SD or MMC devices, say Y here. 473 474 If unsure, say N. 475 476config MMC_SDHCI_ZYNQ 477 bool "Arasan SDHCI controller support" 478 depends on ARCH_ZYNQ || ARCH_ZYNQMP 479 depends on DM_MMC && OF_CONTROL && BLK 480 depends on MMC_SDHCI 481 help 482 Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform 483 484config ZYNQ_SDHCI_MAX_FREQ 485 int "Set the maximum frequency of the controller" 486 depends on MMC_SDHCI_ZYNQ 487 help 488 Set the maximum frequency of the controller. 489 490config ZYNQ_SDHCI_MIN_FREQ 491 int "Set the minimum frequency of the controller" 492 depends on MMC_SDHCI_ZYNQ 493 default 0 494 help 495 Set the minimum frequency of the controller. 496 497config MMC_SUNXI 498 bool "Allwinner sunxi SD/MMC Host Controller support" 499 depends on ARCH_SUNXI && !UART0_PORT_F 500 default y 501 help 502 This selects support for the SD/MMC Host Controller on 503 Allwinner sunxi SoCs. 504 505config MMC_SUNXI_HAS_NEW_MODE 506 bool 507 depends on MMC_SUNXI 508 509config GENERIC_ATMEL_MCI 510 bool "Atmel Multimedia Card Interface support" 511 depends on DM_MMC && BLK && ARCH_AT91 512 help 513 This enables support for Atmel High Speed Multimedia Card Interface 514 (HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3, 515 the SD Memory Card Specification V2.0, the SDIO V2.0 specification 516 and CE-ATA V1.1. 517 518config STM32_SDMMC2 519 bool "STMicroelectronics STM32H7 SD/MMC Host Controller support" 520 depends on DM_MMC && BLK && OF_CONTROL 521 help 522 This selects support for the SD/MMC controller on STM32H7 SoCs. 523 If you have a board based on such a SoC and with a SD/MMC slot, 524 say Y or M here. 525 526config FTSDC010 527 bool "Ftsdc010 SD/MMC controller Support" 528 help 529 This SD/MMC controller is present in Andestech SoCs which is based on Faraday IP. 530 531config FTSDC010_SDIO 532 bool "Support ftsdc010 sdio" 533 default n 534 depends on FTSDC010 535 help 536 This can enable ftsdc010 sdio function. 537 538endif 539 540config TEGRA124_MMC_DISABLE_EXT_LOOPBACK 541 bool "Disable external clock loopback" 542 depends on MMC_SDHCI_TEGRA && TEGRA124 543 help 544 Disable the external clock loopback and use the internal one on SDMMC3 545 as per the SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits 546 being set to 0xfffd according to the TRM. 547 548 TODO(marcel.ziswiler@toradex.com): Move to device tree controlled 549 approach once proper kernel integration made it mainline. 550 551endmenu 552 553config SYS_FSL_ERRATUM_ESDHC111 554 bool 555 556config SYS_FSL_ERRATUM_ESDHC13 557 bool 558 559config SYS_FSL_ERRATUM_ESDHC135 560 bool 561 562config SYS_FSL_ERRATUM_ESDHC_A001 563 bool 564