xref: /openbmc/u-boot/drivers/mmc/Kconfig (revision 4f67b93f) 
1menu "MMC Host controller Support"
2
3config MMC
4	bool "MMC/SD/SDIO card support"
5	default ARM || PPC || SANDBOX
6	select HAVE_BLOCK_DEVICE
7	help
8	  This selects MultiMediaCard, Secure Digital and Secure
9	  Digital I/O support.
10
11	  If you want MMC/SD/SDIO support, you should say Y here and
12	  also to your specific host controller driver.
13
14config MMC_WRITE
15	bool "support for MMC/SD write operations"
16	depends on MMC
17	default y
18	help
19	  Enable write access to MMC and SD Cards
20
21config MMC_BROKEN_CD
22	bool "Poll for broken card detection case"
23	help
24	  If card  detection feature is broken, just poll to detect.
25
26config DM_MMC
27	bool "Enable MMC controllers using Driver Model"
28	depends on DM
29	help
30	  This enables the MultiMediaCard (MMC) uclass which supports MMC and
31	  Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
32	  and non-removable (e.g. eMMC chip) devices are supported. These
33	  appear as block devices in U-Boot and can support filesystems such
34	  as EXT4 and FAT.
35
36config SPL_DM_MMC
37	bool "Enable MMC controllers using Driver Model in SPL"
38	depends on SPL_DM && DM_MMC
39	default y
40	help
41	  This enables the MultiMediaCard (MMC) uclass which supports MMC and
42	  Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
43	  and non-removable (e.g. eMMC chip) devices are supported. These
44	  appear as block devices in U-Boot and can support filesystems such
45	  as EXT4 and FAT.
46
47if MMC
48
49config ARM_PL180_MMCI
50	bool "ARM AMBA Multimedia Card Interface and compatible support"
51	depends on DM_MMC && OF_CONTROL
52	help
53	  This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
54	  Interface (PL180, PL181 and compatible) support.
55	  If you have an ARM(R) platform with a Multimedia Card slot,
56	  say Y or M here.
57
58config MMC_QUIRKS
59	bool "Enable quirks"
60	default y
61	help
62	  Some cards and hosts may sometimes behave unexpectedly (quirks).
63	  This option enable workarounds to handle those quirks. Some of them
64	  are enabled by default, other may require additionnal flags or are
65	  enabled by the host driver.
66
67config MMC_HW_PARTITIONING
68	bool "Support for HW partitioning command(eMMC)"
69	default y
70	help
71	  This adds a command and an API to do hardware partitioning on eMMC
72	  devices.
73
74config MMC_IO_VOLTAGE
75	bool "Support IO voltage configuration"
76	help
77	  IO voltage configuration allows selecting the voltage level of the IO
78	  lines (not the level of main supply). This is required for UHS
79	  support. For eMMC this not mandatory, but not enabling this option may
80	  prevent the driver of using the faster modes.
81
82config SPL_MMC_IO_VOLTAGE
83	bool "Support IO voltage configuration in SPL"
84	default n
85	help
86	  IO voltage configuration allows selecting the voltage level of the IO
87	  lines (not the level of main supply). This is required for UHS
88	  support. For eMMC this not mandatory, but not enabling this option may
89	  prevent the driver of using the faster modes.
90
91config MMC_UHS_SUPPORT
92	bool "enable UHS support"
93	depends on MMC_IO_VOLTAGE
94	help
95	  The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
96	  cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
97	  frequency can go up to 208MHz (SDR104)
98
99config SPL_MMC_UHS_SUPPORT
100	bool "enable UHS support in SPL"
101	depends on SPL_MMC_IO_VOLTAGE
102	help
103	  The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
104	  cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
105	  frequency can go up to 208MHz (SDR104)
106
107config MMC_HS200_SUPPORT
108	bool "enable HS200 support"
109	help
110	  The HS200 mode is support by some eMMC. The bus frequency is up to
111	  200MHz. This mode requires tuning the IO.
112
113
114config SPL_MMC_HS200_SUPPORT
115	bool "enable HS200 support in SPL"
116	help
117	  The HS200 mode is support by some eMMC. The bus frequency is up to
118	  200MHz. This mode requires tuning the IO.
119
120config MMC_VERBOSE
121	bool "Output more information about the MMC"
122	default y
123	help
124	  Enable the output of more information about the card such as the
125	  operating mode.
126
127config SPL_MMC_TINY
128	bool "Tiny MMC framework in SPL"
129	help
130	  Enable MMC framework tinification support. This option is useful if
131	  if your SPL is extremely size constrained. Heed the warning, enable
132	  this option if and only if you know exactly what you are doing, if
133	  you are reading this help text, you most likely have no idea :-)
134
135	  The MMC framework is reduced to bare minimum to be useful. No malloc
136	  support is needed for the MMC framework operation with this option
137	  enabled. The framework supports exactly one MMC device and exactly
138	  one MMC driver. The MMC driver can be adjusted to avoid any malloc
139	  operations too, which can remove the need for malloc support in SPL
140	  and thus further reduce footprint.
141
142config MMC_DAVINCI
143	bool "TI DAVINCI Multimedia Card Interface support"
144	depends on ARCH_DAVINCI
145	default y
146	help
147	  This selects the TI DAVINCI Multimedia card Interface.
148	  If you have an DAVINCI board with a Multimedia Card slot,
149	  say Y here.  If unsure, say N.
150
151config MMC_DW
152	bool "Synopsys DesignWare Memory Card Interface"
153	help
154	  This selects support for the Synopsys DesignWare Mobile Storage IP
155	  block, this provides host support for SD and MMC interfaces, in both
156	  PIO, internal DMA mode and external DMA mode.
157
158config MMC_DW_EXYNOS
159	bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
160	depends on ARCH_EXYNOS
161	depends on MMC_DW
162	default y
163	help
164	  This selects support for Samsung Exynos SoC specific extensions to the
165	  Synopsys DesignWare Memory Card Interface driver. Select this option
166	  for platforms based on Exynos4 and Exynos5 SoC's.
167
168config MMC_DW_K3
169	bool "K3 specific extensions for Synopsys DW Memory Card Interface"
170	depends on MMC_DW
171	help
172	  This selects support for Hisilicon K3 SoC specific extensions to the
173	  Synopsys DesignWare Memory Card Interface driver. Select this option
174	  for platforms based on Hisilicon K3 SoC's.
175
176config MMC_DW_ROCKCHIP
177	bool "Rockchip SD/MMC controller support"
178	depends on DM_MMC && OF_CONTROL
179	depends on MMC_DW
180	help
181	  This enables support for the Rockchip SD/MMM controller, which is
182	  based on Designware IP. The device is compatible with at least
183	  SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
184	  as removeable SD and micro-SD cards.
185
186config MMC_DW_SOCFPGA
187	bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
188	depends on ARCH_SOCFPGA
189	depends on MMC_DW
190	default y
191	help
192	  This selects support for Altera SOCFPGA specific extensions to the
193	  Synopsys DesignWare Memory Card Interface driver. Select this option
194	  for platforms based on Altera SOCFPGA.
195
196config MMC_MESON_GX
197	bool "Meson GX EMMC controller support"
198	depends on DM_MMC && BLK && ARCH_MESON
199	help
200	 Support for EMMC host controller on Meson GX ARM SoCs platform (S905)
201
202config MMC_MXC
203	bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
204	help
205	  This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
206	  Multimedia Card Interface. If you have an i.MX or MPC512x platform
207	  with a Multimedia Card slot, say Y here.
208
209	  If unsure, say N.
210
211config MMC_MXS
212	bool "Freescale MXS Multimedia Card Interface support"
213	depends on MX23 || MX28 || MX6 || MX7
214	select APBH_DMA
215	select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7
216	select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7
217	help
218	  This selects the Freescale SSP MMC controller found on MXS based
219	  platforms like mx23/28.
220
221	  If unsure, say N.
222
223config MMC_PCI
224	bool "Support for MMC controllers on PCI"
225	help
226	  This selects PCI-based MMC controllers.
227	  If you have an MMC controller on a PCI bus, say Y here.
228
229	  If unsure, say N.
230
231config MMC_OMAP_HS
232	bool "TI OMAP High Speed Multimedia Card Interface support"
233	select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
234	select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
235	help
236	  This selects the TI OMAP High Speed Multimedia card Interface.
237	  If you have an omap2plus board with a Multimedia Card slot,
238	  say Y here.
239
240	  If unsure, say N.
241
242config MMC_OMAP_HS_ADMA
243	bool "ADMA support for OMAP HS MMC"
244	depends on MMC_OMAP_HS && !OMAP34XX
245	default y if !AM33XX
246	help
247	  This enables support for the ADMA2 controller (SDA3.00 Part A2 DMA
248	  controller). If supported by the hardware, selecting this option will
249	  increase performances.
250
251config MMC_OMAP36XX_PINS
252	bool "Enable MMC1 on OMAP36xx/37xx"
253	depends on OMAP34XX && MMC_OMAP_HS
254	help
255	  This enables extended-drain in the MMC/SD/SDIO1I/O and
256	  GPIO-associated I/O cells (gpio_126, gpio_127, and gpio_129)
257	  specific to the OMAP36xx/37xx using MMC1
258
259	  If you have a controller with this interface, say Y here.
260
261	  If unsure, say N.
262
263config SH_SDHI
264	bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
265	depends on ARCH_RMOBILE
266	help
267	  Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
268
269config MMC_UNIPHIER
270	bool "UniPhier SD/MMC Host Controller support"
271	depends on ARCH_UNIPHIER
272	depends on BLK && DM_MMC
273	depends on OF_CONTROL
274	help
275	  This selects support for the Matsushita SD/MMC Host Controller on
276	  SocioNext UniPhier SoCs.
277
278config RENESAS_SDHI
279	bool "Renesas R-Car SD/MMC Host Controller support"
280	depends on ARCH_RMOBILE
281	depends on BLK && DM_MMC
282	depends on OF_CONTROL
283	help
284	  This selects support for the Matsushita SD/MMC Host Controller on
285	  Renesas R-Car SoCs.
286
287config MMC_BCM2835
288	bool "BCM2835 family custom SD/MMC Host Controller support"
289	depends on ARCH_BCM283X
290	depends on BLK && DM_MMC
291	depends on OF_CONTROL
292	default y
293	help
294	  This selects support for the custom SD host controller in the BCM2835
295	  family of devices.
296
297	  If you have a BCM2835 platform with SD or MMC devices, say Y here.
298
299	  If unsure, say N.
300
301config MMC_SANDBOX
302	bool "Sandbox MMC support"
303	depends on SANDBOX
304	depends on BLK && DM_MMC && OF_CONTROL
305	help
306	  This select a dummy sandbox MMC driver. At present this does nothing
307	  other than allow sandbox to be build with MMC support. This
308	  improves build coverage for sandbox and makes it easier to detect
309	  MMC build errors with sandbox.
310
311config MMC_SDHCI
312	bool "Secure Digital Host Controller Interface support"
313	help
314	  This selects the generic Secure Digital Host Controller Interface.
315	  It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
316	  and Toshiba(R). Most controllers found in laptops are of this type.
317
318	  If you have a controller with this interface, say Y here.
319
320	  If unsure, say N.
321
322config MMC_SDHCI_IO_ACCESSORS
323	bool
324	depends on MMC_SDHCI
325	help
326	  This is silent Kconfig symbol that is selected by the drivers that
327	  need to overwrite SDHCI IO memory accessors.
328
329config MMC_SDHCI_SDMA
330	bool "Support SDHCI SDMA"
331	depends on MMC_SDHCI
332	help
333	  This enables support for the SDMA (Single Operation DMA) defined
334	  in the SD Host Controller Standard Specification Version 1.00 .
335
336config MMC_SDHCI_ATMEL
337	bool "Atmel SDHCI controller support"
338	depends on ARCH_AT91
339	depends on DM_MMC && BLK && ARCH_AT91
340	depends on MMC_SDHCI
341	help
342	  This enables support for the Atmel SDHCI controller, which supports
343	  the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
344	  Memory Card Specification V3.0, and the SDIO V3.0 specification.
345	  It is compliant with the SD Host Controller Standard V3.0
346	  specification.
347
348config MMC_SDHCI_BCM2835
349	tristate "SDHCI support for the BCM2835 SD/MMC Controller"
350	depends on ARCH_BCM283X
351	depends on MMC_SDHCI
352	select MMC_SDHCI_IO_ACCESSORS
353	help
354	  This selects the BCM2835 SD/MMC controller.
355
356	  If you have a BCM2835 platform with SD or MMC devices,
357	  say Y here.
358
359	  If unsure, say N.
360
361config MMC_SDHCI_CADENCE
362	bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
363	depends on BLK && DM_MMC
364	depends on MMC_SDHCI
365	depends on OF_CONTROL
366	help
367	  This selects the Cadence SD/SDIO/eMMC driver.
368
369	  If you have a controller with this interface, say Y here.
370
371	  If unsure, say N.
372
373config MMC_SDHCI_KONA
374	bool "SDHCI support on Broadcom KONA platform"
375	depends on MMC_SDHCI
376	help
377	  This selects the Broadcom Kona Secure Digital Host Controller
378	  Interface(SDHCI) support.
379	  This is used in Broadcom mobile SoCs.
380
381	  If you have a controller with this interface, say Y here.
382
383config MMC_SDHCI_MSM
384	bool "Qualcomm SDHCI controller"
385	depends on BLK && DM_MMC
386	depends on MMC_SDHCI
387	help
388	  Enables support for SDHCI 2.0 controller present on some Qualcomm
389          Snapdragon devices. This device is compatible with eMMC v4.5 and
390          SD 3.0 specifications. Both SD and eMMC devices are supported.
391	  Card-detect gpios are not supported.
392
393config MMC_SDHCI_MV
394	bool "SDHCI support on Marvell platform"
395	depends on ARCH_MVEBU
396	depends on MMC_SDHCI
397	help
398	  This selects the Secure Digital Host Controller Interface on
399	  Marvell platform.
400
401	  If you have a controller with this interface, say Y here.
402
403	  If unsure, say N.
404
405config MMC_SDHCI_PIC32
406	bool "Microchip PIC32 on-chip SDHCI support"
407	depends on DM_MMC && MACH_PIC32
408	depends on MMC_SDHCI
409	help
410	  Support for Microchip PIC32 SDHCI controller.
411
412config MMC_SDHCI_ROCKCHIP
413	bool "Arasan SDHCI controller for Rockchip support"
414	depends on ARCH_ROCKCHIP
415	depends on DM_MMC && BLK
416	depends on MMC_SDHCI
417	help
418	  Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
419
420config MMC_SDHCI_S5P
421	bool "SDHCI support on Samsung S5P SoC"
422	depends on MMC_SDHCI
423	help
424	  This selects the Secure Digital Host Controller Interface (SDHCI)
425	  on Samsung S5P SoCs.
426
427	  If you have a controller with this interface, say Y here.
428
429	  If unsure, say N.
430
431config MMC_SDHCI_SPEAR
432	bool "SDHCI support on ST SPEAr platform"
433	depends on MMC_SDHCI
434	help
435	  This selects the Secure Digital Host Controller Interface (SDHCI)
436	  often referrered to as the HSMMC block in some of the ST SPEAR range
437	  of SoC
438
439	  If you have a controller with this interface, say Y here.
440
441	  If unsure, say N.
442
443config MMC_SDHCI_STI
444	bool "SDHCI support for STMicroelectronics SoC"
445	depends on MMC_SDHCI && OF_CONTROL
446	help
447	  This selects the Secure Digital Host Controller Interface (SDHCI)
448	  on STMicroelectronics STiH410 SoC.
449
450config MMC_SDHCI_XENON
451	bool "SDHCI support for the Xenon SDHCI controller"
452	depends on MMC_SDHCI && DM_MMC && OF_CONTROL
453	help
454	  Support for Xenon SDHCI host controller on Marvell Armada 3700
455	  7k/8k ARM SoCs platforms
456
457	  If you have a controller with this interface, say Y here.
458
459	  If unsure, say N.
460
461config MMC_SDHCI_TANGIER
462	bool "Tangier SDHCI controller support"
463	depends on DM_MMC && BLK
464	depends on MMC_SDHCI
465	help
466	  This selects support for SDHCI controller on Tanginer
467	  SoC. Note that this controller does not sit on PCI bus and,
468	  hence, cannot be enumerated by standard PCI means.
469
470	  If you're using an Intel Tangier SoC (available on Intel
471	  Edison board), say Y here.
472
473	  If unsure, say N.
474
475config MMC_SDHCI_TEGRA
476	bool "SDHCI platform support for the Tegra SD/MMC Controller"
477	depends on TEGRA
478	default y
479	help
480	  This selects the Tegra SD/MMC controller. If you have a Tegra
481	  platform with SD or MMC devices, say Y here.
482
483	  If unsure, say N.
484
485config MMC_SDHCI_ZYNQ
486	bool "Arasan SDHCI controller support"
487	depends on ARCH_ZYNQ || ARCH_ZYNQMP
488	depends on DM_MMC && OF_CONTROL && BLK
489	depends on MMC_SDHCI
490	help
491	  Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
492
493config ZYNQ_SDHCI_MAX_FREQ
494	int "Set the maximum frequency of the controller"
495	depends on MMC_SDHCI_ZYNQ
496	help
497	  Set the maximum frequency of the controller.
498
499config ZYNQ_SDHCI_MIN_FREQ
500	int "Set the minimum frequency of the controller"
501	depends on MMC_SDHCI_ZYNQ
502	default 0
503	help
504	  Set the minimum frequency of the controller.
505
506config MMC_SUNXI
507	bool "Allwinner sunxi SD/MMC Host Controller support"
508	depends on ARCH_SUNXI && !UART0_PORT_F
509	default y
510	help
511	  This selects support for the SD/MMC Host Controller on
512	  Allwinner sunxi SoCs.
513
514config MMC_SUNXI_HAS_NEW_MODE
515	bool
516	depends on MMC_SUNXI
517
518config GENERIC_ATMEL_MCI
519	bool "Atmel Multimedia Card Interface support"
520	depends on DM_MMC && BLK && ARCH_AT91
521	help
522	  This enables support for Atmel High Speed Multimedia Card Interface
523	  (HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3,
524	  the SD Memory Card Specification V2.0, the SDIO V2.0 specification
525	  and CE-ATA V1.1.
526
527config STM32_SDMMC2
528	bool "STMicroelectronics STM32H7 SD/MMC Host Controller support"
529	depends on DM_MMC && BLK && OF_CONTROL
530	help
531	  This selects support for the SD/MMC controller on STM32H7 SoCs.
532	  If you have a board based on such a SoC and with a SD/MMC slot,
533	  say Y or M here.
534
535config FTSDC010
536	bool "Ftsdc010 SD/MMC controller Support"
537	help
538	  This SD/MMC controller is present in Andestech SoCs which is based on Faraday IP.
539
540config FTSDC010_SDIO
541	bool "Support ftsdc010 sdio"
542	default n
543	depends on FTSDC010
544	help
545		This can enable ftsdc010 sdio function.
546
547endif
548
549config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
550	bool "Disable external clock loopback"
551	depends on MMC_SDHCI_TEGRA && TEGRA124
552	help
553	  Disable the external clock loopback and use the internal one on SDMMC3
554	  as per the SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits
555	  being set to 0xfffd according to the TRM.
556
557	  TODO(marcel.ziswiler@toradex.com): Move to device tree controlled
558	  approach once proper kernel integration made it mainline.
559
560config FSL_ESDHC
561	bool "Freescale/NXP eSDHC controller support"
562	help
563	  This selects support for the eSDHC (enhanced secure digital host
564	  controller) found on numerous Freescale/NXP SoCs.
565
566endmenu
567
568config SYS_FSL_ERRATUM_ESDHC111
569	bool
570
571config SYS_FSL_ERRATUM_ESDHC13
572	bool
573
574config SYS_FSL_ERRATUM_ESDHC135
575	bool
576
577config SYS_FSL_ERRATUM_ESDHC_A001
578	bool
579