xref: /openbmc/u-boot/drivers/mmc/Kconfig (revision 23a06416)
1menu "MMC Host controller Support"
2
3config MMC
4	bool "MMC/SD/SDIO card support"
5	default ARM || PPC || SANDBOX
6	help
7	  This selects MultiMediaCard, Secure Digital and Secure
8	  Digital I/O support.
9
10	  If you want MMC/SD/SDIO support, you should say Y here and
11	  also to your specific host controller driver.
12
13config DM_MMC
14	bool "Enable MMC controllers using Driver Model"
15	depends on DM
16	help
17	  This enables the MultiMediaCard (MMC) uclass which supports MMC and
18	  Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
19	  and non-removable (e.g. eMMC chip) devices are supported. These
20	  appear as block devices in U-Boot and can support filesystems such
21	  as EXT4 and FAT.
22
23config SPL_DM_MMC
24	bool "Enable MMC controllers using Driver Model in SPL"
25	depends on SPL_DM && DM_MMC
26	default y
27	help
28	  This enables the MultiMediaCard (MMC) uclass which supports MMC and
29	  Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
30	  and non-removable (e.g. eMMC chip) devices are supported. These
31	  appear as block devices in U-Boot and can support filesystems such
32	  as EXT4 and FAT.
33
34if MMC
35
36config SPL_MMC_TINY
37	bool "Tiny MMC framework in SPL"
38	help
39	  Enable MMC framework tinification support. This option is useful if
40	  if your SPL is extremely size constrained. Heed the warning, enable
41	  this option if and only if you know exactly what you are doing, if
42	  you are reading this help text, you most likely have no idea :-)
43
44	  The MMC framework is reduced to bare minimum to be useful. No malloc
45	  support is needed for the MMC framework operation with this option
46	  enabled. The framework supports exactly one MMC device and exactly
47	  one MMC driver. The MMC driver can be adjusted to avoid any malloc
48	  operations too, which can remove the need for malloc support in SPL
49	  and thus further reduce footprint.
50
51config MMC_DAVINCI
52	bool "TI DAVINCI Multimedia Card Interface support"
53	depends on ARCH_DAVINCI
54	default y
55	help
56	  This selects the TI DAVINCI Multimedia card Interface.
57	  If you have an DAVINCI board with a Multimedia Card slot,
58	  say Y here.  If unsure, say N.
59
60config MMC_DW
61	bool "Synopsys DesignWare Memory Card Interface"
62	help
63	  This selects support for the Synopsys DesignWare Mobile Storage IP
64	  block, this provides host support for SD and MMC interfaces, in both
65	  PIO, internal DMA mode and external DMA mode.
66
67config MMC_DW_EXYNOS
68	bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
69	depends on ARCH_EXYNOS
70	depends on MMC_DW
71	default y
72	help
73	  This selects support for Samsung Exynos SoC specific extensions to the
74	  Synopsys DesignWare Memory Card Interface driver. Select this option
75	  for platforms based on Exynos4 and Exynos5 SoC's.
76
77config MMC_DW_K3
78	bool "K3 specific extensions for Synopsys DW Memory Card Interface"
79	depends on MMC_DW
80	help
81	  This selects support for Hisilicon K3 SoC specific extensions to the
82	  Synopsys DesignWare Memory Card Interface driver. Select this option
83	  for platforms based on Hisilicon K3 SoC's.
84
85config MMC_DW_ROCKCHIP
86	bool "Rockchip SD/MMC controller support"
87	depends on DM_MMC && OF_CONTROL
88	depends on MMC_DW
89	help
90	  This enables support for the Rockchip SD/MMM controller, which is
91	  based on Designware IP. The device is compatible with at least
92	  SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
93	  as removeable SD and micro-SD cards.
94
95config MMC_DW_SOCFPGA
96	bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
97	depends on ARCH_SOCFPGA
98	depends on MMC_DW
99	default y
100	help
101	  This selects support for Altera SOCFPGA specific extensions to the
102	  Synopsys DesignWare Memory Card Interface driver. Select this option
103	  for platforms based on Altera SOCFPGA.
104
105config MMC_MESON_GX
106	bool "Meson GX EMMC controller support"
107	depends on DM_MMC && BLK && ARCH_MESON
108	help
109	 Support for EMMC host controller on Meson GX ARM SoCs platform (S905)
110
111config MMC_MXC
112	bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
113	help
114	  This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
115	  Multimedia Card Interface. If you have an i.MX or MPC512x platform
116	  with a Multimedia Card slot, say Y here.
117
118	  If unsure, say N.
119
120config MMC_MXS
121	bool "Freescale MXS Multimedia Card Interface support"
122	help
123	  This selects the Freescale SSP MMC controller found on MXS based
124	  platforms like mx23/28.
125
126	  If unsure, say N.
127
128config MMC_PCI
129	bool "Support for MMC controllers on PCI"
130	help
131	  This selects PCI-based MMC controllers.
132	  If you have an MMC controller on a PCI bus, say Y here.
133
134	  If unsure, say N.
135
136config MMC_OMAP_HS
137	bool "TI OMAP High Speed Multimedia Card Interface support"
138	select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
139	help
140	  This selects the TI OMAP High Speed Multimedia card Interface.
141	  If you have an omap2plus board with a Multimedia Card slot,
142	  say Y here.
143
144	  If unsure, say N.
145
146config MMC_OMAP36XX_PINS
147	bool "Enable MMC1 on OMAP36xx/37xx"
148	depends on OMAP34XX && MMC_OMAP_HS
149	help
150	  This enables extended-drain in the MMC/SD/SDIO1I/O and
151	  GPIO-associated I/O cells (gpio_126, gpio_127, and gpio_129)
152	  specific to the OMAP36xx/37xx using MMC1
153
154	  If you have a controller with this interface, say Y here.
155
156	  If unsure, say N.
157
158config SH_SDHI
159	bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
160	depends on ARCH_RMOBILE
161	help
162	  Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
163
164config MMC_UNIPHIER
165	bool "UniPhier SD/MMC Host Controller support"
166	depends on ARCH_UNIPHIER
167	depends on BLK && DM_MMC
168	depends on OF_CONTROL
169	help
170	  This selects support for the SD/MMC Host Controller on UniPhier SoCs.
171
172config MMC_SANDBOX
173	bool "Sandbox MMC support"
174	depends on SANDBOX
175	depends on BLK && DM_MMC && OF_CONTROL
176	help
177	  This select a dummy sandbox MMC driver. At present this does nothing
178	  other than allow sandbox to be build with MMC support. This
179	  improves build coverage for sandbox and makes it easier to detect
180	  MMC build errors with sandbox.
181
182config MMC_SDHCI
183	bool "Secure Digital Host Controller Interface support"
184	help
185	  This selects the generic Secure Digital Host Controller Interface.
186	  It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
187	  and Toshiba(R). Most controllers found in laptops are of this type.
188
189	  If you have a controller with this interface, say Y here.
190
191	  If unsure, say N.
192
193config MMC_SDHCI_IO_ACCESSORS
194	bool
195	depends on MMC_SDHCI
196	help
197	  This is silent Kconfig symbol that is selected by the drivers that
198	  need to overwrite SDHCI IO memory accessors.
199
200config MMC_SDHCI_SDMA
201	bool "Support SDHCI SDMA"
202	depends on MMC_SDHCI
203	help
204	  This enables support for the SDMA (Single Operation DMA) defined
205	  in the SD Host Controller Standard Specification Version 1.00 .
206
207config MMC_SDHCI_ATMEL
208	bool "Atmel SDHCI controller support"
209	depends on ARCH_AT91
210	depends on DM_MMC && BLK && ARCH_AT91
211	depends on MMC_SDHCI
212	help
213	  This enables support for the Atmel SDHCI controller, which supports
214	  the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
215	  Memory Card Specification V3.0, and the SDIO V3.0 specification.
216	  It is compliant with the SD Host Controller Standard V3.0
217	  specification.
218
219config MMC_SDHCI_BCM2835
220	tristate "SDHCI support for the BCM2835 SD/MMC Controller"
221	depends on ARCH_BCM283X
222	depends on MMC_SDHCI
223	select MMC_SDHCI_IO_ACCESSORS
224	help
225	  This selects the BCM2835 SD/MMC controller.
226
227	  If you have a BCM2835 platform with SD or MMC devices,
228	  say Y here.
229
230	  If unsure, say N.
231
232config MMC_SDHCI_CADENCE
233	bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
234	depends on BLK && DM_MMC
235	depends on MMC_SDHCI
236	depends on OF_CONTROL
237	help
238	  This selects the Cadence SD/SDIO/eMMC driver.
239
240	  If you have a controller with this interface, say Y here.
241
242	  If unsure, say N.
243
244config MMC_SDHCI_KONA
245	bool "SDHCI support on Broadcom KONA platform"
246	depends on MMC_SDHCI
247	help
248	  This selects the Broadcom Kona Secure Digital Host Controller
249	  Interface(SDHCI) support.
250	  This is used in Broadcom mobile SoCs.
251
252	  If you have a controller with this interface, say Y here.
253
254config MMC_SDHCI_MSM
255	bool "Qualcomm SDHCI controller"
256	depends on BLK && DM_MMC
257	depends on MMC_SDHCI
258	help
259	  Enables support for SDHCI 2.0 controller present on some Qualcomm
260          Snapdragon devices. This device is compatible with eMMC v4.5 and
261          SD 3.0 specifications. Both SD and eMMC devices are supported.
262	  Card-detect gpios are not supported.
263
264config MMC_SDHCI_MV
265	bool "SDHCI support on Marvell platform"
266	depends on ARCH_MVEBU
267	depends on MMC_SDHCI
268	help
269	  This selects the Secure Digital Host Controller Interface on
270	  Marvell platform.
271
272	  If you have a controller with this interface, say Y here.
273
274	  If unsure, say N.
275
276config MMC_SDHCI_PIC32
277	bool "Microchip PIC32 on-chip SDHCI support"
278	depends on DM_MMC && MACH_PIC32
279	depends on MMC_SDHCI
280	help
281	  Support for Microchip PIC32 SDHCI controller.
282
283config MMC_SDHCI_ROCKCHIP
284	bool "Arasan SDHCI controller for Rockchip support"
285	depends on ARCH_ROCKCHIP
286	depends on DM_MMC && BLK
287	depends on MMC_SDHCI
288	help
289	  Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
290
291config MMC_SDHCI_S5P
292	bool "SDHCI support on Samsung S5P SoC"
293	depends on MMC_SDHCI
294	help
295	  This selects the Secure Digital Host Controller Interface (SDHCI)
296	  on Samsung S5P SoCs.
297
298	  If you have a controller with this interface, say Y here.
299
300	  If unsure, say N.
301
302config MMC_SDHCI_SPEAR
303	bool "SDHCI support on ST SPEAr platform"
304	depends on MMC_SDHCI
305	help
306	  This selects the Secure Digital Host Controller Interface (SDHCI)
307	  often referrered to as the HSMMC block in some of the ST SPEAR range
308	  of SoC
309
310	  If you have a controller with this interface, say Y here.
311
312	  If unsure, say N.
313
314config MMC_SDHCI_STI
315	bool "SDHCI support for STMicroelectronics SoC"
316	depends on MMC_SDHCI && OF_CONTROL
317	help
318	  This selects the Secure Digital Host Controller Interface (SDHCI)
319	  on STMicroelectronics STiH410 SoC.
320
321config MMC_SDHCI_XENON
322	bool "SDHCI support for the Xenon SDHCI controller"
323	depends on MMC_SDHCI && DM_MMC && OF_CONTROL
324	help
325	  Support for Xenon SDHCI host controller on Marvell Armada 3700
326	  7k/8k ARM SoCs platforms
327
328	  If you have a controller with this interface, say Y here.
329
330	  If unsure, say N.
331
332config MMC_SDHCI_TANGIER
333	bool "Tangier SDHCI controller support"
334	depends on DM_MMC && BLK
335	depends on MMC_SDHCI
336	help
337	  This selects support for SDHCI controller on Tanginer
338	  SoC. Note that this controller does not sit on PCI bus and,
339	  hence, cannot be enumerated by standard PCI means.
340
341	  If you're using an Intel Tangier SoC (available on Intel
342	  Edison board), say Y here.
343
344	  If unsure, say N.
345
346config MMC_SDHCI_TEGRA
347	bool "SDHCI platform support for the Tegra SD/MMC Controller"
348	depends on TEGRA
349	default y
350	help
351	  This selects the Tegra SD/MMC controller. If you have a Tegra
352	  platform with SD or MMC devices, say Y here.
353
354	  If unsure, say N.
355
356config MMC_SDHCI_ZYNQ
357	bool "Arasan SDHCI controller support"
358	depends on ARCH_ZYNQ || ARCH_ZYNQMP
359	depends on DM_MMC && OF_CONTROL && BLK
360	depends on MMC_SDHCI
361	help
362	  Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
363
364config MMC_SUNXI
365	bool "Allwinner sunxi SD/MMC Host Controller support"
366	depends on ARCH_SUNXI && !UART0_PORT_F
367	default y
368	help
369	  This selects support for the SD/MMC Host Controller on
370	  Allwinner sunxi SoCs.
371
372config MMC_SUNXI_HAS_NEW_MODE
373	bool
374	depends on MMC_SUNXI
375
376config GENERIC_ATMEL_MCI
377	bool "Atmel Multimedia Card Interface support"
378	depends on DM_MMC && BLK && ARCH_AT91
379	help
380	  This enables support for Atmel High Speed Multimedia Card Interface
381	  (HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3,
382	  the SD Memory Card Specification V2.0, the SDIO V2.0 specification
383	  and CE-ATA V1.1.
384
385endif
386
387config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
388	bool "Disable external clock loopback"
389	depends on MMC_SDHCI_TEGRA && TEGRA124
390	help
391	  Disable the external clock loopback and use the internal one on SDMMC3
392	  as per the SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits
393	  being set to 0xfffd according to the TRM.
394
395	  TODO(marcel.ziswiler@toradex.com): Move to device tree controlled
396	  approach once proper kernel integration made it mainline.
397
398endmenu
399
400config SYS_FSL_ERRATUM_ESDHC111
401	bool
402
403config SYS_FSL_ERRATUM_ESDHC13
404	bool
405
406config SYS_FSL_ERRATUM_ESDHC135
407	bool
408
409config SYS_FSL_ERRATUM_ESDHC_A001
410	bool
411