1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * (C) Copyright 2013 ADVANSEE 4 * Benoît Thébaudeau <benoit.thebaudeau@advansee.com> 5 * 6 * Based on Dirk Behme's 7 * https://github.com/dirkbehme/u-boot-imx6/blob/28b17e9/drivers/misc/imx_otp.c, 8 * which is based on Freescale's 9 * http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/tree/drivers/misc/imx_otp.c?h=imx_v2009.08_1.1.0&id=9aa74e6, 10 * which is: 11 * Copyright (C) 2011 Freescale Semiconductor, Inc. 12 */ 13 14 #include <common.h> 15 #include <fuse.h> 16 #include <linux/errno.h> 17 #include <asm/io.h> 18 #include <asm/arch/clock.h> 19 #include <asm/arch/imx-regs.h> 20 #include <asm/mach-imx/sys_proto.h> 21 22 #define BO_CTRL_WR_UNLOCK 16 23 #define BM_CTRL_WR_UNLOCK 0xffff0000 24 #define BV_CTRL_WR_UNLOCK_KEY 0x3e77 25 #define BM_CTRL_ERROR 0x00000200 26 #define BM_CTRL_BUSY 0x00000100 27 #define BO_CTRL_ADDR 0 28 #ifdef CONFIG_MX7 29 #define BM_CTRL_ADDR 0x0000000f 30 #define BM_CTRL_RELOAD 0x00000400 31 #elif defined(CONFIG_MX7ULP) 32 #define BM_CTRL_ADDR 0x000000FF 33 #define BM_CTRL_RELOAD 0x00000400 34 #define BM_OUT_STATUS_DED 0x00000400 35 #define BM_OUT_STATUS_LOCKED 0x00000800 36 #define BM_OUT_STATUS_PROGFAIL 0x00001000 37 #elif defined(CONFIG_IMX8M) 38 #define BM_CTRL_ADDR 0x000000ff 39 #else 40 #define BM_CTRL_ADDR 0x0000007f 41 #endif 42 43 #ifdef CONFIG_MX7 44 #define BO_TIMING_FSOURCE 12 45 #define BM_TIMING_FSOURCE 0x0007f000 46 #define BV_TIMING_FSOURCE_NS 1001 47 #define BO_TIMING_PROG 0 48 #define BM_TIMING_PROG 0x00000fff 49 #define BV_TIMING_PROG_US 10 50 #else 51 #define BO_TIMING_STROBE_READ 16 52 #define BM_TIMING_STROBE_READ 0x003f0000 53 #define BV_TIMING_STROBE_READ_NS 37 54 #define BO_TIMING_RELAX 12 55 #define BM_TIMING_RELAX 0x0000f000 56 #define BV_TIMING_RELAX_NS 17 57 #define BO_TIMING_STROBE_PROG 0 58 #define BM_TIMING_STROBE_PROG 0x00000fff 59 #define BV_TIMING_STROBE_PROG_US 10 60 #endif 61 62 #define BM_READ_CTRL_READ_FUSE 0x00000001 63 64 #define BF(value, field) (((value) << BO_##field) & BM_##field) 65 66 #define WRITE_POSTAMBLE_US 2 67 68 #if defined(CONFIG_MX6) || defined(CONFIG_VF610) 69 #define FUSE_BANK_SIZE 0x80 70 #ifdef CONFIG_MX6SL 71 #define FUSE_BANKS 8 72 #elif defined(CONFIG_MX6ULL) || defined(CONFIG_MX6SLL) 73 #define FUSE_BANKS 9 74 #else 75 #define FUSE_BANKS 16 76 #endif 77 #elif defined CONFIG_MX7 78 #define FUSE_BANK_SIZE 0x40 79 #define FUSE_BANKS 16 80 #elif defined(CONFIG_MX7ULP) 81 #define FUSE_BANK_SIZE 0x80 82 #define FUSE_BANKS 31 83 #elif defined(CONFIG_IMX8M) 84 #define FUSE_BANK_SIZE 0x40 85 #define FUSE_BANKS 64 86 #else 87 #error "Unsupported architecture\n" 88 #endif 89 90 #if defined(CONFIG_MX6) 91 92 /* 93 * There is a hole in shadow registers address map of size 0x100 94 * between bank 5 and bank 6 on iMX6QP, iMX6DQ, iMX6SDL, iMX6SX, 95 * iMX6UL, i.MX6ULL and i.MX6SLL. 96 * Bank 5 ends at 0x6F0 and Bank 6 starts at 0x800. When reading the fuses, 97 * we should account for this hole in address space. 98 * 99 * Similar hole exists between bank 14 and bank 15 of size 100 * 0x80 on iMX6QP, iMX6DQ, iMX6SDL and iMX6SX. 101 * Note: iMX6SL has only 0-7 banks and there is no hole. 102 * Note: iMX6UL doesn't have this one. 103 * 104 * This function is to covert user input to physical bank index. 105 * Only needed when read fuse, because we use register offset, so 106 * need to calculate real register offset. 107 * When write, no need to consider hole, always use the bank/word 108 * index from fuse map. 109 */ 110 u32 fuse_bank_physical(int index) 111 { 112 u32 phy_index; 113 114 if (is_mx6sl() || is_mx7ulp()) { 115 phy_index = index; 116 } else if (is_mx6ul() || is_mx6ull() || is_mx6sll()) { 117 if ((is_mx6ull() || is_mx6sll()) && index == 8) 118 index = 7; 119 120 if (index >= 6) 121 phy_index = fuse_bank_physical(5) + (index - 6) + 3; 122 else 123 phy_index = index; 124 } else { 125 if (index >= 15) 126 phy_index = fuse_bank_physical(14) + (index - 15) + 2; 127 else if (index >= 6) 128 phy_index = fuse_bank_physical(5) + (index - 6) + 3; 129 else 130 phy_index = index; 131 } 132 return phy_index; 133 } 134 135 u32 fuse_word_physical(u32 bank, u32 word_index) 136 { 137 if (is_mx6ull() || is_mx6sll()) { 138 if (bank == 8) 139 word_index = word_index + 4; 140 } 141 142 return word_index; 143 } 144 #else 145 u32 fuse_bank_physical(int index) 146 { 147 return index; 148 } 149 150 u32 fuse_word_physical(u32 bank, u32 word_index) 151 { 152 return word_index; 153 } 154 155 #endif 156 157 static void wait_busy(struct ocotp_regs *regs, unsigned int delay_us) 158 { 159 while (readl(®s->ctrl) & BM_CTRL_BUSY) 160 udelay(delay_us); 161 } 162 163 static void clear_error(struct ocotp_regs *regs) 164 { 165 writel(BM_CTRL_ERROR, ®s->ctrl_clr); 166 } 167 168 static int prepare_access(struct ocotp_regs **regs, u32 bank, u32 word, 169 int assert, const char *caller) 170 { 171 *regs = (struct ocotp_regs *)OCOTP_BASE_ADDR; 172 173 if (bank >= FUSE_BANKS || 174 word >= ARRAY_SIZE((*regs)->bank[0].fuse_regs) >> 2 || 175 !assert) { 176 printf("mxc_ocotp %s(): Invalid argument\n", caller); 177 return -EINVAL; 178 } 179 180 if (is_mx6ull() || is_mx6sll()) { 181 if ((bank == 7 || bank == 8) && 182 word >= ARRAY_SIZE((*regs)->bank[0].fuse_regs) >> 3) { 183 printf("mxc_ocotp %s(): Invalid argument\n", caller); 184 return -EINVAL; 185 } 186 } 187 188 enable_ocotp_clk(1); 189 190 wait_busy(*regs, 1); 191 clear_error(*regs); 192 193 return 0; 194 } 195 196 static int finish_access(struct ocotp_regs *regs, const char *caller) 197 { 198 u32 err; 199 200 err = !!(readl(®s->ctrl) & BM_CTRL_ERROR); 201 clear_error(regs); 202 203 #ifdef CONFIG_MX7ULP 204 /* Need to power down the OTP memory */ 205 writel(1, ®s->pdn); 206 #endif 207 if (err) { 208 printf("mxc_ocotp %s(): Access protect error\n", caller); 209 return -EIO; 210 } 211 212 return 0; 213 } 214 215 static int prepare_read(struct ocotp_regs **regs, u32 bank, u32 word, u32 *val, 216 const char *caller) 217 { 218 return prepare_access(regs, bank, word, val != NULL, caller); 219 } 220 221 int fuse_read(u32 bank, u32 word, u32 *val) 222 { 223 struct ocotp_regs *regs; 224 int ret; 225 u32 phy_bank; 226 u32 phy_word; 227 228 ret = prepare_read(®s, bank, word, val, __func__); 229 if (ret) 230 return ret; 231 232 phy_bank = fuse_bank_physical(bank); 233 phy_word = fuse_word_physical(bank, word); 234 235 *val = readl(®s->bank[phy_bank].fuse_regs[phy_word << 2]); 236 237 #ifdef CONFIG_MX7ULP 238 if (readl(®s->out_status) & BM_OUT_STATUS_DED) { 239 writel(BM_OUT_STATUS_DED, ®s->out_status_clr); 240 printf("mxc_ocotp %s(): fuse read wrong\n", __func__); 241 return -EIO; 242 } 243 #endif 244 return finish_access(regs, __func__); 245 } 246 247 #ifdef CONFIG_MX7 248 static void set_timing(struct ocotp_regs *regs) 249 { 250 u32 ipg_clk; 251 u32 fsource, prog; 252 u32 timing; 253 254 ipg_clk = mxc_get_clock(MXC_IPG_CLK); 255 256 fsource = DIV_ROUND_UP((ipg_clk / 1000) * BV_TIMING_FSOURCE_NS, 257 + 1000000) + 1; 258 prog = DIV_ROUND_CLOSEST(ipg_clk * BV_TIMING_PROG_US, 1000000) + 1; 259 260 timing = BF(fsource, TIMING_FSOURCE) | BF(prog, TIMING_PROG); 261 262 clrsetbits_le32(®s->timing, BM_TIMING_FSOURCE | BM_TIMING_PROG, 263 timing); 264 } 265 #elif defined(CONFIG_MX7ULP) 266 static void set_timing(struct ocotp_regs *regs) 267 { 268 /* No timing set for MX7ULP */ 269 } 270 271 #else 272 static void set_timing(struct ocotp_regs *regs) 273 { 274 u32 ipg_clk; 275 u32 relax, strobe_read, strobe_prog; 276 u32 timing; 277 278 ipg_clk = mxc_get_clock(MXC_IPG_CLK); 279 280 relax = DIV_ROUND_UP(ipg_clk * BV_TIMING_RELAX_NS, 1000000000) - 1; 281 strobe_read = DIV_ROUND_UP(ipg_clk * BV_TIMING_STROBE_READ_NS, 282 1000000000) + 2 * (relax + 1) - 1; 283 strobe_prog = DIV_ROUND_CLOSEST(ipg_clk * BV_TIMING_STROBE_PROG_US, 284 1000000) + 2 * (relax + 1) - 1; 285 286 timing = BF(strobe_read, TIMING_STROBE_READ) | 287 BF(relax, TIMING_RELAX) | 288 BF(strobe_prog, TIMING_STROBE_PROG); 289 290 clrsetbits_le32(®s->timing, BM_TIMING_STROBE_READ | BM_TIMING_RELAX | 291 BM_TIMING_STROBE_PROG, timing); 292 } 293 #endif 294 295 static void setup_direct_access(struct ocotp_regs *regs, u32 bank, u32 word, 296 int write) 297 { 298 u32 wr_unlock = write ? BV_CTRL_WR_UNLOCK_KEY : 0; 299 #ifdef CONFIG_MX7 300 u32 addr = bank; 301 #elif defined CONFIG_IMX8M 302 u32 addr = bank << 2 | word; 303 #else 304 u32 addr; 305 /* Bank 7 and Bank 8 only supports 4 words each for i.MX6ULL */ 306 if ((is_mx6ull() || is_mx6sll()) && (bank > 7)) { 307 bank = bank - 1; 308 word += 4; 309 } 310 addr = bank << 3 | word; 311 #endif 312 313 set_timing(regs); 314 clrsetbits_le32(®s->ctrl, BM_CTRL_WR_UNLOCK | BM_CTRL_ADDR, 315 BF(wr_unlock, CTRL_WR_UNLOCK) | 316 BF(addr, CTRL_ADDR)); 317 } 318 319 int fuse_sense(u32 bank, u32 word, u32 *val) 320 { 321 struct ocotp_regs *regs; 322 int ret; 323 324 ret = prepare_read(®s, bank, word, val, __func__); 325 if (ret) 326 return ret; 327 328 setup_direct_access(regs, bank, word, false); 329 writel(BM_READ_CTRL_READ_FUSE, ®s->read_ctrl); 330 wait_busy(regs, 1); 331 #ifdef CONFIG_MX7 332 *val = readl((®s->read_fuse_data0) + (word << 2)); 333 #else 334 *val = readl(®s->read_fuse_data); 335 #endif 336 337 #ifdef CONFIG_MX7ULP 338 if (readl(®s->out_status) & BM_OUT_STATUS_DED) { 339 writel(BM_OUT_STATUS_DED, ®s->out_status_clr); 340 printf("mxc_ocotp %s(): fuse read wrong\n", __func__); 341 return -EIO; 342 } 343 #endif 344 345 return finish_access(regs, __func__); 346 } 347 348 static int prepare_write(struct ocotp_regs **regs, u32 bank, u32 word, 349 const char *caller) 350 { 351 #ifdef CONFIG_MX7ULP 352 u32 val; 353 int ret; 354 355 /* Only bank 0 and 1 are redundancy mode, others are ECC mode */ 356 if (bank != 0 && bank != 1) { 357 ret = fuse_sense(bank, word, &val); 358 if (ret) 359 return ret; 360 361 if (val != 0) { 362 printf("mxc_ocotp: The word has been programmed, no more write\n"); 363 return -EPERM; 364 } 365 } 366 #endif 367 368 return prepare_access(regs, bank, word, true, caller); 369 } 370 371 int fuse_prog(u32 bank, u32 word, u32 val) 372 { 373 struct ocotp_regs *regs; 374 int ret; 375 376 ret = prepare_write(®s, bank, word, __func__); 377 if (ret) 378 return ret; 379 380 setup_direct_access(regs, bank, word, true); 381 #ifdef CONFIG_MX7 382 switch (word) { 383 case 0: 384 writel(0, ®s->data1); 385 writel(0, ®s->data2); 386 writel(0, ®s->data3); 387 writel(val, ®s->data0); 388 break; 389 case 1: 390 writel(val, ®s->data1); 391 writel(0, ®s->data2); 392 writel(0, ®s->data3); 393 writel(0, ®s->data0); 394 break; 395 case 2: 396 writel(0, ®s->data1); 397 writel(val, ®s->data2); 398 writel(0, ®s->data3); 399 writel(0, ®s->data0); 400 break; 401 case 3: 402 writel(0, ®s->data1); 403 writel(0, ®s->data2); 404 writel(val, ®s->data3); 405 writel(0, ®s->data0); 406 break; 407 } 408 wait_busy(regs, BV_TIMING_PROG_US); 409 #else 410 writel(val, ®s->data); 411 wait_busy(regs, BV_TIMING_STROBE_PROG_US); 412 #endif 413 udelay(WRITE_POSTAMBLE_US); 414 415 #ifdef CONFIG_MX7ULP 416 if (readl(®s->out_status) & (BM_OUT_STATUS_PROGFAIL | BM_OUT_STATUS_LOCKED)) { 417 writel((BM_OUT_STATUS_PROGFAIL | BM_OUT_STATUS_LOCKED), ®s->out_status_clr); 418 printf("mxc_ocotp %s(): fuse write is failed\n", __func__); 419 return -EIO; 420 } 421 #endif 422 423 return finish_access(regs, __func__); 424 } 425 426 int fuse_override(u32 bank, u32 word, u32 val) 427 { 428 struct ocotp_regs *regs; 429 int ret; 430 u32 phy_bank; 431 u32 phy_word; 432 433 ret = prepare_write(®s, bank, word, __func__); 434 if (ret) 435 return ret; 436 437 phy_bank = fuse_bank_physical(bank); 438 phy_word = fuse_word_physical(bank, word); 439 440 writel(val, ®s->bank[phy_bank].fuse_regs[phy_word << 2]); 441 442 #ifdef CONFIG_MX7ULP 443 if (readl(®s->out_status) & (BM_OUT_STATUS_PROGFAIL | BM_OUT_STATUS_LOCKED)) { 444 writel((BM_OUT_STATUS_PROGFAIL | BM_OUT_STATUS_LOCKED), ®s->out_status_clr); 445 printf("mxc_ocotp %s(): fuse write is failed\n", __func__); 446 return -EIO; 447 } 448 #endif 449 450 return finish_access(regs, __func__); 451 } 452