1 /* 2 * Copyright 2008 Extreme Engineering Solutions, Inc. 3 * 4 * This program is free software; you can redistribute it and/or 5 * modify it under the terms of the GNU General Public License 6 * Version 2 as published by the Free Software Foundation. 7 * 8 * This program is distributed in the hope that it will be useful, 9 * but WITHOUT ANY WARRANTY; without even the implied warranty of 10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 11 * GNU General Public License for more details. 12 * 13 * You should have received a copy of the GNU General Public License 14 * along with this program; if not, write to the Free Software 15 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 16 * MA 02111-1307 USA 17 */ 18 19 /* 20 * Driver for DS4510, a CPU supervisor with integrated EEPROM, SRAM, 21 * and 4 programmable non-volatile GPIO pins. 22 */ 23 24 #include <common.h> 25 #include <i2c.h> 26 #include <command.h> 27 #include <ds4510.h> 28 29 /* Default to an address that hopefully won't corrupt other i2c devices */ 30 #ifndef CONFIG_SYS_I2C_DS4510_ADDR 31 #define CONFIG_SYS_I2C_DS4510_ADDR (~0) 32 #endif 33 34 enum { 35 DS4510_CMD_INFO, 36 DS4510_CMD_DEVICE, 37 DS4510_CMD_NV, 38 DS4510_CMD_RSTDELAY, 39 DS4510_CMD_OUTPUT, 40 DS4510_CMD_INPUT, 41 DS4510_CMD_PULLUP, 42 DS4510_CMD_EEPROM, 43 DS4510_CMD_SEEPROM, 44 DS4510_CMD_SRAM, 45 }; 46 47 /* 48 * Write to DS4510, taking page boundaries into account 49 */ 50 int ds4510_mem_write(uint8_t chip, int offset, uint8_t *buf, int count) 51 { 52 int wrlen; 53 int i = 0; 54 55 do { 56 wrlen = DS4510_EEPROM_PAGE_SIZE - 57 DS4510_EEPROM_PAGE_OFFSET(offset); 58 if (count < wrlen) 59 wrlen = count; 60 if (i2c_write(chip, offset, 1, &buf[i], wrlen)) 61 return -1; 62 63 /* 64 * This delay isn't needed for SRAM writes but shouldn't delay 65 * things too much, so do it unconditionally for simplicity 66 */ 67 udelay(DS4510_EEPROM_PAGE_WRITE_DELAY_MS * 1000); 68 count -= wrlen; 69 offset += wrlen; 70 i += wrlen; 71 } while (count > 0); 72 73 return 0; 74 } 75 76 /* 77 * General read from DS4510 78 */ 79 int ds4510_mem_read(uint8_t chip, int offset, uint8_t *buf, int count) 80 { 81 return i2c_read(chip, offset, 1, buf, count); 82 } 83 84 /* 85 * Write SEE bit in config register. 86 * nv = 0 - Writes to SEEPROM registers behave like EEPROM 87 * nv = 1 - Writes to SEEPROM registers behave like SRAM 88 */ 89 int ds4510_see_write(uint8_t chip, uint8_t nv) 90 { 91 uint8_t data; 92 93 if (i2c_read(chip, DS4510_CFG, 1, &data, 1)) 94 return -1; 95 96 if (nv) /* Treat SEEPROM bits as EEPROM */ 97 data &= ~DS4510_CFG_SEE; 98 else /* Treat SEEPROM bits as SRAM */ 99 data |= DS4510_CFG_SEE; 100 101 return ds4510_mem_write(chip, DS4510_CFG, &data, 1); 102 } 103 104 /* 105 * Write de-assertion of reset signal delay 106 */ 107 int ds4510_rstdelay_write(uint8_t chip, uint8_t delay) 108 { 109 uint8_t data; 110 111 if (i2c_read(chip, DS4510_RSTDELAY, 1, &data, 1)) 112 return -1; 113 114 data &= ~DS4510_RSTDELAY_MASK; 115 data |= delay & DS4510_RSTDELAY_MASK; 116 117 return ds4510_mem_write(chip, DS4510_RSTDELAY, &data, 1); 118 } 119 120 /* 121 * Write pullup characteristics of IO pins 122 */ 123 int ds4510_pullup_write(uint8_t chip, uint8_t val) 124 { 125 val &= DS4510_IO_MASK; 126 127 return ds4510_mem_write(chip, DS4510_PULLUP, (uint8_t *)&val, 1); 128 } 129 130 /* 131 * Read pullup characteristics of IO pins 132 */ 133 int ds4510_pullup_read(uint8_t chip) 134 { 135 uint8_t val; 136 137 if (i2c_read(chip, DS4510_PULLUP, 1, &val, 1)) 138 return -1; 139 140 return val & DS4510_IO_MASK; 141 } 142 143 /* 144 * Write drive level of IO pins 145 */ 146 int ds4510_gpio_write(uint8_t chip, uint8_t val) 147 { 148 uint8_t data; 149 int i; 150 151 for (i = 0; i < DS4510_NUM_IO; i++) { 152 if (i2c_read(chip, DS4510_IO0 - i, 1, &data, 1)) 153 return -1; 154 155 if (val & (0x1 << i)) 156 data |= 0x1; 157 else 158 data &= ~0x1; 159 160 if (ds4510_mem_write(chip, DS4510_IO0 - i, &data, 1)) 161 return -1; 162 } 163 164 return 0; 165 } 166 167 /* 168 * Read drive level of IO pins 169 */ 170 int ds4510_gpio_read(uint8_t chip) 171 { 172 uint8_t data; 173 int val = 0; 174 int i; 175 176 for (i = 0; i < DS4510_NUM_IO; i++) { 177 if (i2c_read(chip, DS4510_IO0 - i, 1, &data, 1)) 178 return -1; 179 180 if (data & 1) 181 val |= (1 << i); 182 } 183 184 return val; 185 } 186 187 /* 188 * Read physical level of IO pins 189 */ 190 int ds4510_gpio_read_val(uint8_t chip) 191 { 192 uint8_t val; 193 194 if (i2c_read(chip, DS4510_IO_STATUS, 1, &val, 1)) 195 return -1; 196 197 return val & DS4510_IO_MASK; 198 } 199 200 #ifdef CONFIG_CMD_DS4510 201 #ifdef CONFIG_CMD_DS4510_INFO 202 /* 203 * Display DS4510 information 204 */ 205 static int ds4510_info(uint8_t chip) 206 { 207 int i; 208 int tmp; 209 uint8_t data; 210 211 printf("DS4510 @ 0x%x:\n\n", chip); 212 213 if (i2c_read(chip, DS4510_RSTDELAY, 1, &data, 1)) 214 return -1; 215 printf("rstdelay = 0x%x\n\n", data & DS4510_RSTDELAY_MASK); 216 217 if (i2c_read(chip, DS4510_CFG, 1, &data, 1)) 218 return -1; 219 printf("config = 0x%x\n", data); 220 printf(" /ready = %d\n", data & DS4510_CFG_READY ? 1 : 0); 221 printf(" trip pt = %d\n", data & DS4510_CFG_TRIP_POINT ? 1 : 0); 222 printf(" rst sts = %d\n", data & DS4510_CFG_RESET ? 1 : 0); 223 printf(" /see = %d\n", data & DS4510_CFG_SEE ? 1 : 0); 224 printf(" swrst = %d\n\n", data & DS4510_CFG_SWRST ? 1 : 0); 225 226 printf("gpio pins: 3210\n"); 227 printf("---------------\n"); 228 printf("pullup "); 229 230 tmp = ds4510_pullup_read(chip); 231 if (tmp == -1) 232 return tmp; 233 for (i = DS4510_NUM_IO - 1; i >= 0; i--) 234 printf("%d", (tmp & (1 << i)) ? 1 : 0); 235 printf("\n"); 236 237 printf("driven "); 238 tmp = ds4510_gpio_read(chip); 239 if (tmp == -1) 240 return -1; 241 for (i = DS4510_NUM_IO - 1; i >= 0; i--) 242 printf("%d", (tmp & (1 << i)) ? 1 : 0); 243 printf("\n"); 244 245 printf("read "); 246 tmp = ds4510_gpio_read_val(chip); 247 if (tmp == -1) 248 return -1; 249 for (i = DS4510_NUM_IO - 1; i >= 0; i--) 250 printf("%d", (tmp & (1 << i)) ? 1 : 0); 251 printf("\n"); 252 253 return 0; 254 } 255 #endif /* CONFIG_CMD_DS4510_INFO */ 256 257 cmd_tbl_t cmd_ds4510[] = { 258 U_BOOT_CMD_MKENT(device, 3, 0, (void *)DS4510_CMD_DEVICE, "", ""), 259 U_BOOT_CMD_MKENT(nv, 3, 0, (void *)DS4510_CMD_NV, "", ""), 260 U_BOOT_CMD_MKENT(output, 4, 0, (void *)DS4510_CMD_OUTPUT, "", ""), 261 U_BOOT_CMD_MKENT(input, 3, 0, (void *)DS4510_CMD_INPUT, "", ""), 262 U_BOOT_CMD_MKENT(pullup, 4, 0, (void *)DS4510_CMD_PULLUP, "", ""), 263 #ifdef CONFIG_CMD_DS4510_INFO 264 U_BOOT_CMD_MKENT(info, 2, 0, (void *)DS4510_CMD_INFO, "", ""), 265 #endif 266 #ifdef CONFIG_CMD_DS4510_RST 267 U_BOOT_CMD_MKENT(rstdelay, 3, 0, (void *)DS4510_CMD_RSTDELAY, "", ""), 268 #endif 269 #ifdef CONFIG_CMD_DS4510_MEM 270 U_BOOT_CMD_MKENT(eeprom, 6, 0, (void *)DS4510_CMD_EEPROM, "", ""), 271 U_BOOT_CMD_MKENT(seeprom, 6, 0, (void *)DS4510_CMD_SEEPROM, "", ""), 272 U_BOOT_CMD_MKENT(sram, 6, 0, (void *)DS4510_CMD_SRAM, "", ""), 273 #endif 274 }; 275 276 int do_ds4510(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) 277 { 278 static uint8_t chip = CONFIG_SYS_I2C_DS4510_ADDR; 279 cmd_tbl_t *c; 280 ulong ul_arg2 = 0; 281 ulong ul_arg3 = 0; 282 int tmp; 283 #ifdef CONFIG_CMD_DS4510_MEM 284 ulong addr; 285 ulong off; 286 ulong cnt; 287 int end; 288 int (*rw_func)(uint8_t, int, uint8_t *, int); 289 #endif 290 291 c = find_cmd_tbl(argv[1], cmd_ds4510, ARRAY_SIZE(cmd_ds4510)); 292 293 /* All commands but "device" require 'maxargs' arguments */ 294 if (!c || !((argc == (c->maxargs)) || 295 (((int)c->cmd == DS4510_CMD_DEVICE) && 296 (argc == (c->maxargs - 1))))) { 297 cmd_usage(cmdtp); 298 return 1; 299 } 300 301 /* arg2 used as chip addr and pin number */ 302 if (argc > 2) 303 ul_arg2 = simple_strtoul(argv[2], NULL, 16); 304 305 /* arg3 used as output/pullup value */ 306 if (argc > 3) 307 ul_arg3 = simple_strtoul(argv[3], NULL, 16); 308 309 switch ((int)c->cmd) { 310 case DS4510_CMD_DEVICE: 311 if (argc == 3) 312 chip = ul_arg2; 313 printf("Current device address: 0x%x\n", chip); 314 return 0; 315 case DS4510_CMD_NV: 316 return ds4510_see_write(chip, ul_arg2); 317 case DS4510_CMD_OUTPUT: 318 tmp = ds4510_gpio_read(chip); 319 if (tmp == -1) 320 return -1; 321 if (ul_arg3) 322 tmp |= (1 << ul_arg2); 323 else 324 tmp &= ~(1 << ul_arg2); 325 return ds4510_gpio_write(chip, tmp); 326 case DS4510_CMD_INPUT: 327 tmp = ds4510_gpio_read_val(chip); 328 if (tmp == -1) 329 return -1; 330 return (tmp & (1 << ul_arg2)) != 0; 331 case DS4510_CMD_PULLUP: 332 tmp = ds4510_pullup_read(chip); 333 if (tmp == -1) 334 return -1; 335 if (ul_arg3) 336 tmp |= (1 << ul_arg2); 337 else 338 tmp &= ~(1 << ul_arg2); 339 return ds4510_pullup_write(chip, tmp); 340 #ifdef CONFIG_CMD_DS4510_INFO 341 case DS4510_CMD_INFO: 342 return ds4510_info(chip); 343 #endif 344 #ifdef CONFIG_CMD_DS4510_RST 345 case DS4510_CMD_RSTDELAY: 346 return ds4510_rstdelay_write(chip, ul_arg2); 347 #endif 348 #ifdef CONFIG_CMD_DS4510_MEM 349 case DS4510_CMD_EEPROM: 350 end = DS4510_EEPROM + DS4510_EEPROM_SIZE; 351 off = DS4510_EEPROM; 352 break; 353 case DS4510_CMD_SEEPROM: 354 end = DS4510_SEEPROM + DS4510_SEEPROM_SIZE; 355 off = DS4510_SEEPROM; 356 break; 357 case DS4510_CMD_SRAM: 358 end = DS4510_SRAM + DS4510_SRAM_SIZE; 359 off = DS4510_SRAM; 360 break; 361 #endif 362 default: 363 /* We should never get here... */ 364 return 1; 365 } 366 367 #ifdef CONFIG_CMD_DS4510_MEM 368 /* Only eeprom, seeprom, and sram commands should make it here */ 369 if (strcmp(argv[2], "read") == 0) { 370 rw_func = ds4510_mem_read; 371 } else if (strcmp(argv[2], "write") == 0) { 372 rw_func = ds4510_mem_write; 373 } else { 374 cmd_usage(cmdtp); 375 return 1; 376 } 377 378 addr = simple_strtoul(argv[3], NULL, 16); 379 off += simple_strtoul(argv[4], NULL, 16); 380 cnt = simple_strtoul(argv[5], NULL, 16); 381 382 if ((off + cnt) > end) { 383 printf("ERROR: invalid len\n"); 384 return -1; 385 } 386 387 return rw_func(chip, off, (uint8_t *)addr, cnt); 388 #endif 389 } 390 391 U_BOOT_CMD( 392 ds4510, 6, 1, do_ds4510, 393 "ds4510 eeprom/seeprom/sram/gpio access", 394 "device [dev]\n" 395 " - show or set current device address\n" 396 #ifdef CONFIG_CMD_DS4510_INFO 397 "ds4510 info\n" 398 " - display ds4510 info\n" 399 #endif 400 "ds4510 output pin 0|1\n" 401 " - set pin low or high-Z\n" 402 "ds4510 input pin\n" 403 " - read value of pin\n" 404 "ds4510 pullup pin 0|1\n" 405 " - disable/enable pullup on specified pin\n" 406 "ds4510 nv 0|1\n" 407 " - make gpio and seeprom writes volatile/non-volatile" 408 #ifdef CONFIG_CMD_DS4510_RST 409 "\n" 410 "ds4510 rstdelay 0-3\n" 411 " - set reset output delay" 412 #endif 413 #ifdef CONFIG_CMD_DS4510_MEM 414 "\n" 415 "ds4510 eeprom read addr off cnt\n" 416 "ds4510 eeprom write addr off cnt\n" 417 " - read/write 'cnt' bytes at EEPROM offset 'off'\n" 418 "ds4510 seeprom read addr off cnt\n" 419 "ds4510 seeprom write addr off cnt\n" 420 " - read/write 'cnt' bytes at SRAM-shadowed EEPROM offset 'off'\n" 421 "ds4510 sram read addr off cnt\n" 422 "ds4510 sram write addr off cnt\n" 423 " - read/write 'cnt' bytes at SRAM offset 'off'" 424 #endif 425 ); 426 #endif /* CONFIG_CMD_DS4510 */ 427