1# 2# Multifunction miscellaneous devices 3# 4 5menu "Multifunction device drivers" 6 7config MISC 8 bool "Enable Driver Model for Misc drivers" 9 depends on DM 10 help 11 Enable driver model for miscellaneous devices. This class is 12 used only for those do not fit other more general classes. A 13 set of generic read, write and ioctl methods may be used to 14 access the device. 15 16config ALTERA_SYSID 17 bool "Altera Sysid support" 18 depends on MISC 19 help 20 Select this to enable a sysid for Altera devices. Please find 21 details on the "Embedded Peripherals IP User Guide" of Altera. 22 23config ATSHA204A 24 bool "Support for Atmel ATSHA204A module" 25 depends on MISC 26 help 27 Enable support for I2C connected Atmel's ATSHA204A 28 CryptoAuthentication module found for example on the Turris Omnia 29 board. 30 31config ROCKCHIP_EFUSE 32 bool "Rockchip e-fuse support" 33 depends on MISC 34 help 35 Enable (read-only) access for the e-fuse block found in Rockchip 36 SoCs: accesses can either be made using byte addressing and a length 37 or through child-nodes that are generated based on the e-fuse map 38 retrieved from the DTS. 39 40 This driver currently supports the RK3399 only, but can easily be 41 extended (by porting the read function from the Linux kernel sources) 42 to support other recent Rockchip devices. 43 44config CMD_CROS_EC 45 bool "Enable crosec command" 46 depends on CROS_EC 47 help 48 Enable command-line access to the Chrome OS EC (Embedded 49 Controller). This provides the 'crosec' command which has 50 a number of sub-commands for performing EC tasks such as 51 updating its flash, accessing a small saved context area 52 and talking to the I2C bus behind the EC (if there is one). 53 54config CROS_EC 55 bool "Enable Chrome OS EC" 56 help 57 Enable access to the Chrome OS EC. This is a separate 58 microcontroller typically available on a SPI bus on Chromebooks. It 59 provides access to the keyboard, some internal storage and may 60 control access to the battery and main PMIC depending on the 61 device. You can use the 'crosec' command to access it. 62 63config CROS_EC_I2C 64 bool "Enable Chrome OS EC I2C driver" 65 depends on CROS_EC 66 help 67 Enable I2C access to the Chrome OS EC. This is used on older 68 ARM Chromebooks such as snow and spring before the standard bus 69 changed to SPI. The EC will accept commands across the I2C using 70 a special message protocol, and provide responses. 71 72config CROS_EC_LPC 73 bool "Enable Chrome OS EC LPC driver" 74 depends on CROS_EC 75 help 76 Enable I2C access to the Chrome OS EC. This is used on x86 77 Chromebooks such as link and falco. The keyboard is provided 78 through a legacy port interface, so on x86 machines the main 79 function of the EC is power and thermal management. 80 81config CROS_EC_SANDBOX 82 bool "Enable Chrome OS EC sandbox driver" 83 depends on CROS_EC && SANDBOX 84 help 85 Enable a sandbox emulation of the Chrome OS EC. This supports 86 keyboard (use the -l flag to enable the LCD), verified boot context, 87 EC flash read/write/erase support and a few other things. It is 88 enough to perform a Chrome OS verified boot on sandbox. 89 90config CROS_EC_SPI 91 bool "Enable Chrome OS EC SPI driver" 92 depends on CROS_EC 93 help 94 Enable SPI access to the Chrome OS EC. This is used on newer 95 ARM Chromebooks such as pit, pi and nyan-big. The SPI interface 96 provides a faster and more robust interface than I2C but the bugs 97 are less interesting. 98 99config DS4510 100 bool "Enable support for DS4510 CPU supervisor" 101 help 102 Enable support for the Maxim DS4510 CPU supervisor. It has an 103 integrated 64-byte EEPROM, four programmable non-volatile I/O pins 104 and a configurable timer for the supervisor function. The device is 105 connected over I2C. 106 107config FSL_SEC_MON 108 bool "Enable FSL SEC_MON Driver" 109 help 110 Freescale Security Monitor block is responsible for monitoring 111 system states. 112 Security Monitor can be transitioned on any security failures, 113 like software violations or hardware security violations. 114 115config MXC_OCOTP 116 bool "Enable MXC OCOTP Driver" 117 help 118 If you say Y here, you will get support for the One Time 119 Programmable memory pages that are stored on the some 120 Freescale i.MX processors. 121 122config NUVOTON_NCT6102D 123 bool "Enable Nuvoton NCT6102D Super I/O driver" 124 help 125 If you say Y here, you will get support for the Nuvoton 126 NCT6102D Super I/O driver. This can be used to enable or 127 disable the legacy UART, the watchdog or other devices 128 in the Nuvoton Super IO chips on X86 platforms. 129 130config PWRSEQ 131 bool "Enable power-sequencing drivers" 132 depends on DM 133 help 134 Power-sequencing drivers provide support for controlling power for 135 devices. They are typically referenced by a phandle from another 136 device. When the device is started up, its power sequence can be 137 initiated. 138 139config SPL_PWRSEQ 140 bool "Enable power-sequencing drivers for SPL" 141 depends on PWRSEQ 142 help 143 Power-sequencing drivers provide support for controlling power for 144 devices. They are typically referenced by a phandle from another 145 device. When the device is started up, its power sequence can be 146 initiated. 147 148config PCA9551_LED 149 bool "Enable PCA9551 LED driver" 150 help 151 Enable driver for PCA9551 LED controller. This controller 152 is connected via I2C. So I2C needs to be enabled. 153 154config PCA9551_I2C_ADDR 155 hex "I2C address of PCA9551 LED controller" 156 depends on PCA9551_LED 157 default 0x60 158 help 159 The I2C address of the PCA9551 LED controller. 160 161config TEGRA_CAR 162 bool "Enable support for the Tegra CAR driver" 163 depends on TEGRA_NO_BPMP 164 help 165 The Tegra CAR (Clock and Reset Controller) is a HW module that 166 controls almost all clocks and resets in a Tegra SoC. 167 168config TEGRA186_BPMP 169 bool "Enable support for the Tegra186 BPMP driver" 170 depends on TEGRA186 171 help 172 The Tegra BPMP (Boot and Power Management Processor) is a separate 173 auxiliary CPU embedded into Tegra to perform power management work, 174 and controls related features such as clocks, resets, power domains, 175 PMIC I2C bus, etc. This driver provides the core low-level 176 communication path by which feature-specific drivers (such as clock) 177 can make requests to the BPMP. This driver is similar to an MFD 178 driver in the Linux kernel. 179 180config WINBOND_W83627 181 bool "Enable Winbond Super I/O driver" 182 help 183 If you say Y here, you will get support for the Winbond 184 W83627 Super I/O driver. This can be used to enable the 185 legacy UART or other devices in the Winbond Super IO chips 186 on X86 platforms. 187 188config QFW 189 bool 190 help 191 Hidden option to enable QEMU fw_cfg interface. This will be selected by 192 either CONFIG_CMD_QFW or CONFIG_GENERATE_ACPI_TABLE. 193 194config I2C_EEPROM 195 bool "Enable driver for generic I2C-attached EEPROMs" 196 depends on MISC 197 help 198 Enable a generic driver for EEPROMs attached via I2C. 199 200if I2C_EEPROM 201 202config SYS_I2C_EEPROM_ADDR 203 hex "Chip address of the EEPROM device" 204 default 0 205 206config SYS_I2C_EEPROM_BUS 207 int "I2C bus of the EEPROM device." 208 default 0 209 210config SYS_EEPROM_SIZE 211 int "Size in bytes of the EEPROM device" 212 default 256 213 214config SYS_EEPROM_PAGE_WRITE_BITS 215 int "Number of bits used to address bytes in a single page" 216 default 0 217 help 218 The EEPROM page size is 2^SYS_EEPROM_PAGE_WRITE_BITS. 219 A 64 byte page, for example would require six bits. 220 221config SYS_EEPROM_PAGE_WRITE_DELAY_MS 222 int "Number of milliseconds to delay between page writes" 223 default 0 224 225config SYS_I2C_EEPROM_ADDR_LEN 226 int "Length in bytes of the EEPROM memory array address" 227 default 1 228 help 229 Note: This is NOT the chip address length! 230 231config SYS_I2C_EEPROM_ADDR_OVERFLOW 232 hex "EEPROM Address Overflow" 233 default 0 234 help 235 EEPROM chips that implement "address overflow" are ones 236 like Catalyst 24WC04/08/16 which has 9/10/11 bits of 237 address and the extra bits end up in the "chip address" bit 238 slots. This makes a 24WC08 (1Kbyte) chip look like four 256 239 byte chips. 240 241endif 242 243 244endmenu 245