xref: /openbmc/u-boot/drivers/input/cros_ec_keyb.c (revision 23ff8633)
1 /*
2  * Chromium OS Matrix Keyboard
3  *
4  * Copyright (c) 2012 The Chromium OS Authors.
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #include <common.h>
10 #include <cros_ec.h>
11 #include <dm.h>
12 #include <errno.h>
13 #include <fdtdec.h>
14 #include <input.h>
15 #include <keyboard.h>
16 #include <key_matrix.h>
17 #include <stdio_dev.h>
18 
19 DECLARE_GLOBAL_DATA_PTR;
20 
21 enum {
22 	KBC_MAX_KEYS		= 8,	/* Maximum keys held down at once */
23 	KBC_REPEAT_RATE_MS	= 30,
24 	KBC_REPEAT_DELAY_MS	= 240,
25 };
26 
27 struct cros_ec_keyb_priv {
28 	struct input_config *input;	/* The input layer */
29 	struct key_matrix matrix;	/* The key matrix layer */
30 	int key_rows;			/* Number of keyboard rows */
31 	int key_cols;			/* Number of keyboard columns */
32 	int ghost_filter;		/* 1 to enable ghost filter, else 0 */
33 };
34 
35 
36 /**
37  * Check the keyboard controller and return a list of key matrix positions
38  * for which a key is pressed
39  *
40  * @param dev		Keyboard device
41  * @param keys		List of keys that we have detected
42  * @param max_count	Maximum number of keys to return
43  * @param samep		Set to true if this scan repeats the last, else false
44  * @return number of pressed keys, 0 for none, -EIO on error
45  */
46 static int check_for_keys(struct udevice *dev, struct key_matrix_key *keys,
47 			  int max_count, bool *samep)
48 {
49 	struct cros_ec_keyb_priv *priv = dev_get_priv(dev);
50 	struct key_matrix_key *key;
51 	static struct mbkp_keyscan last_scan;
52 	static bool last_scan_valid;
53 	struct mbkp_keyscan scan;
54 	unsigned int row, col, bit, data;
55 	int num_keys;
56 
57 	if (cros_ec_scan_keyboard(dev->parent, &scan)) {
58 		debug("%s: keyboard scan failed\n", __func__);
59 		return -EIO;
60 	}
61 	*samep = last_scan_valid && !memcmp(&last_scan, &scan, sizeof(scan));
62 
63 	/*
64 	 * This is a bit odd. The EC has no way to tell us that it has run
65 	 * out of key scans. It just returns the same scan over and over
66 	 * again. So the only way to detect that we have run out is to detect
67 	 * that this scan is the same as the last.
68 	 */
69 	last_scan_valid = true;
70 	memcpy(&last_scan, &scan, sizeof(last_scan));
71 
72 	for (col = num_keys = bit = 0; col < priv->matrix.num_cols;
73 			col++) {
74 		for (row = 0; row < priv->matrix.num_rows; row++) {
75 			unsigned int mask = 1 << (bit & 7);
76 
77 			data = scan.data[bit / 8];
78 			if ((data & mask) && num_keys < max_count) {
79 				key = keys + num_keys++;
80 				key->row = row;
81 				key->col = col;
82 				key->valid = 1;
83 			}
84 			bit++;
85 		}
86 	}
87 
88 	return num_keys;
89 }
90 
91 /**
92  * Check the keyboard, and send any keys that are pressed.
93  *
94  * This is called by input_tstc() and input_getc() when they need more
95  * characters
96  *
97  * @param input		Input configuration
98  * @return 1, to indicate that we have something to look at
99  */
100 int cros_ec_kbc_check(struct input_config *input)
101 {
102 	struct udevice *dev = input->dev;
103 	struct cros_ec_keyb_priv *priv = dev_get_priv(dev);
104 	static struct key_matrix_key last_keys[KBC_MAX_KEYS];
105 	static int last_num_keys;
106 	struct key_matrix_key keys[KBC_MAX_KEYS];
107 	int keycodes[KBC_MAX_KEYS];
108 	int num_keys, num_keycodes;
109 	int irq_pending, sent;
110 	bool same = false;
111 
112 	/*
113 	 * Loop until the EC has no more keyscan records, or we have
114 	 * received at least one character. This means we know that tstc()
115 	 * will always return non-zero if keys have been pressed.
116 	 *
117 	 * Without this loop, a key release (which generates no new ascii
118 	 * characters) will cause us to exit this function, and just tstc()
119 	 * may return 0 before all keys have been read from the EC.
120 	 */
121 	do {
122 		irq_pending = cros_ec_interrupt_pending(dev->parent);
123 		if (irq_pending) {
124 			num_keys = check_for_keys(dev, keys, KBC_MAX_KEYS,
125 						  &same);
126 			if (num_keys < 0)
127 				return 0;
128 			last_num_keys = num_keys;
129 			memcpy(last_keys, keys, sizeof(keys));
130 		} else {
131 			/*
132 			 * EC doesn't want to be asked, so use keys from last
133 			 * time.
134 			 */
135 			num_keys = last_num_keys;
136 			memcpy(keys, last_keys, sizeof(keys));
137 		}
138 
139 		if (num_keys < 0)
140 			return -1;
141 		num_keycodes = key_matrix_decode(&priv->matrix, keys,
142 				num_keys, keycodes, KBC_MAX_KEYS);
143 		sent = input_send_keycodes(input, keycodes, num_keycodes);
144 
145 		/*
146 		 * For those ECs without an interrupt, stop scanning when we
147 		 * see that the scan is the same as last time.
148 		 */
149 		if ((irq_pending < 0) && same)
150 			break;
151 	} while (irq_pending && !sent);
152 
153 	return 1;
154 }
155 
156 /**
157  * Decode MBKP keyboard details from the device tree
158  *
159  * @param blob		Device tree blob
160  * @param node		Node to decode from
161  * @param config	Configuration data read from fdt
162  * @return 0 if ok, -1 on error
163  */
164 static int cros_ec_keyb_decode_fdt(const void *blob, int node,
165 				struct cros_ec_keyb_priv *config)
166 {
167 	/*
168 	 * Get keyboard rows and columns - at present we are limited to
169 	 * 8 columns by the protocol (one byte per row scan)
170 	 */
171 	config->key_rows = fdtdec_get_int(blob, node, "keypad,num-rows", 0);
172 	config->key_cols = fdtdec_get_int(blob, node, "keypad,num-columns", 0);
173 	if (!config->key_rows || !config->key_cols ||
174 			config->key_rows * config->key_cols / 8
175 				> CROS_EC_KEYSCAN_COLS) {
176 		debug("%s: Invalid key matrix size %d x %d\n", __func__,
177 		      config->key_rows, config->key_cols);
178 		return -1;
179 	}
180 	config->ghost_filter = fdtdec_get_bool(blob, node,
181 					       "google,needs-ghost-filter");
182 	return 0;
183 }
184 
185 static int cros_ec_kbd_probe(struct udevice *dev)
186 {
187 	struct cros_ec_keyb_priv *priv = dev_get_priv(dev);
188 	struct keyboard_priv *uc_priv = dev_get_uclass_priv(dev);
189 	struct stdio_dev *sdev = &uc_priv->sdev;
190 	struct input_config *input = &uc_priv->input;
191 	const void *blob = gd->fdt_blob;
192 	int node = dev->of_offset;
193 	int ret;
194 
195 	if (cros_ec_keyb_decode_fdt(blob, node, priv))
196 		return -1;
197 	input_set_delays(input, KBC_REPEAT_DELAY_MS, KBC_REPEAT_RATE_MS);
198 	ret = key_matrix_init(&priv->matrix, priv->key_rows, priv->key_cols,
199 			      priv->ghost_filter);
200 	if (ret) {
201 		debug("%s: cannot init key matrix\n", __func__);
202 		return ret;
203 	}
204 	ret = key_matrix_decode_fdt(&priv->matrix, gd->fdt_blob, node);
205 	if (ret) {
206 		debug("%s: Could not decode key matrix from fdt\n", __func__);
207 		return ret;
208 	}
209 	debug("%s: Matrix keyboard %dx%d ready\n", __func__, priv->key_rows,
210 	      priv->key_cols);
211 
212 	priv->input = input;
213 	input->dev = dev;
214 	input_add_tables(input, false);
215 	input->read_keys = cros_ec_kbc_check;
216 	strcpy(sdev->name, "cros-ec-keyb");
217 
218 	/* Register the device. cros_ec_init_keyboard() will be called soon */
219 	return input_stdio_register(sdev);
220 }
221 
222 static const struct keyboard_ops cros_ec_kbd_ops = {
223 };
224 
225 static const struct udevice_id cros_ec_kbd_ids[] = {
226 	{ .compatible = "google,cros-ec-keyb" },
227 	{ }
228 };
229 
230 U_BOOT_DRIVER(cros_ec_kbd) = {
231 	.name	= "cros_ec_kbd",
232 	.id	= UCLASS_KEYBOARD,
233 	.of_match = cros_ec_kbd_ids,
234 	.probe = cros_ec_kbd_probe,
235 	.ops	= &cros_ec_kbd_ops,
236 	.priv_auto_alloc_size = sizeof(struct cros_ec_keyb_priv),
237 };
238