xref: /openbmc/u-boot/drivers/input/cros_ec_keyb.c (revision 1a68faac)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Chromium OS Matrix Keyboard
4  *
5  * Copyright (c) 2012 The Chromium OS Authors.
6  */
7 
8 #include <common.h>
9 #include <cros_ec.h>
10 #include <dm.h>
11 #include <errno.h>
12 #include <input.h>
13 #include <keyboard.h>
14 #include <key_matrix.h>
15 #include <stdio_dev.h>
16 
17 enum {
18 	KBC_MAX_KEYS		= 8,	/* Maximum keys held down at once */
19 	KBC_REPEAT_RATE_MS	= 30,
20 	KBC_REPEAT_DELAY_MS	= 240,
21 };
22 
23 struct cros_ec_keyb_priv {
24 	struct input_config *input;	/* The input layer */
25 	struct key_matrix matrix;	/* The key matrix layer */
26 	int key_rows;			/* Number of keyboard rows */
27 	int key_cols;			/* Number of keyboard columns */
28 	int ghost_filter;		/* 1 to enable ghost filter, else 0 */
29 };
30 
31 
32 /**
33  * Check the keyboard controller and return a list of key matrix positions
34  * for which a key is pressed
35  *
36  * @param dev		Keyboard device
37  * @param keys		List of keys that we have detected
38  * @param max_count	Maximum number of keys to return
39  * @param samep		Set to true if this scan repeats the last, else false
40  * @return number of pressed keys, 0 for none, -EIO on error
41  */
42 static int check_for_keys(struct udevice *dev, struct key_matrix_key *keys,
43 			  int max_count, bool *samep)
44 {
45 	struct cros_ec_keyb_priv *priv = dev_get_priv(dev);
46 	struct key_matrix_key *key;
47 	static struct mbkp_keyscan last_scan;
48 	static bool last_scan_valid;
49 	struct mbkp_keyscan scan;
50 	unsigned int row, col, bit, data;
51 	int num_keys;
52 
53 	if (cros_ec_scan_keyboard(dev->parent, &scan)) {
54 		debug("%s: keyboard scan failed\n", __func__);
55 		return -EIO;
56 	}
57 	*samep = last_scan_valid && !memcmp(&last_scan, &scan, sizeof(scan));
58 
59 	/*
60 	 * This is a bit odd. The EC has no way to tell us that it has run
61 	 * out of key scans. It just returns the same scan over and over
62 	 * again. So the only way to detect that we have run out is to detect
63 	 * that this scan is the same as the last.
64 	 */
65 	last_scan_valid = true;
66 	memcpy(&last_scan, &scan, sizeof(last_scan));
67 
68 	for (col = num_keys = bit = 0; col < priv->matrix.num_cols;
69 			col++) {
70 		for (row = 0; row < priv->matrix.num_rows; row++) {
71 			unsigned int mask = 1 << (bit & 7);
72 
73 			data = scan.data[bit / 8];
74 			if ((data & mask) && num_keys < max_count) {
75 				key = keys + num_keys++;
76 				key->row = row;
77 				key->col = col;
78 				key->valid = 1;
79 			}
80 			bit++;
81 		}
82 	}
83 
84 	return num_keys;
85 }
86 
87 /**
88  * Check the keyboard, and send any keys that are pressed.
89  *
90  * This is called by input_tstc() and input_getc() when they need more
91  * characters
92  *
93  * @param input		Input configuration
94  * @return 1, to indicate that we have something to look at
95  */
96 int cros_ec_kbc_check(struct input_config *input)
97 {
98 	struct udevice *dev = input->dev;
99 	struct cros_ec_keyb_priv *priv = dev_get_priv(dev);
100 	static struct key_matrix_key last_keys[KBC_MAX_KEYS];
101 	static int last_num_keys;
102 	struct key_matrix_key keys[KBC_MAX_KEYS];
103 	int keycodes[KBC_MAX_KEYS];
104 	int num_keys, num_keycodes;
105 	int irq_pending, sent;
106 	bool same = false;
107 
108 	/*
109 	 * Loop until the EC has no more keyscan records, or we have
110 	 * received at least one character. This means we know that tstc()
111 	 * will always return non-zero if keys have been pressed.
112 	 *
113 	 * Without this loop, a key release (which generates no new ascii
114 	 * characters) will cause us to exit this function, and just tstc()
115 	 * may return 0 before all keys have been read from the EC.
116 	 */
117 	do {
118 		irq_pending = cros_ec_interrupt_pending(dev->parent);
119 		if (irq_pending) {
120 			num_keys = check_for_keys(dev, keys, KBC_MAX_KEYS,
121 						  &same);
122 			if (num_keys < 0)
123 				return 0;
124 			last_num_keys = num_keys;
125 			memcpy(last_keys, keys, sizeof(keys));
126 		} else {
127 			/*
128 			 * EC doesn't want to be asked, so use keys from last
129 			 * time.
130 			 */
131 			num_keys = last_num_keys;
132 			memcpy(keys, last_keys, sizeof(keys));
133 		}
134 
135 		if (num_keys < 0)
136 			return -1;
137 		num_keycodes = key_matrix_decode(&priv->matrix, keys,
138 				num_keys, keycodes, KBC_MAX_KEYS);
139 		sent = input_send_keycodes(input, keycodes, num_keycodes);
140 
141 		/*
142 		 * For those ECs without an interrupt, stop scanning when we
143 		 * see that the scan is the same as last time.
144 		 */
145 		if ((irq_pending < 0) && same)
146 			break;
147 	} while (irq_pending && !sent);
148 
149 	return 1;
150 }
151 
152 /**
153  * Decode MBKP keyboard details from the device tree
154  *
155  * @param blob		Device tree blob
156  * @param node		Node to decode from
157  * @param config	Configuration data read from fdt
158  * @return 0 if ok, -1 on error
159  */
160 static int cros_ec_keyb_decode_fdt(struct udevice *dev,
161 				   struct cros_ec_keyb_priv *config)
162 {
163 	/*
164 	 * Get keyboard rows and columns - at present we are limited to
165 	 * 8 columns by the protocol (one byte per row scan)
166 	 */
167 	config->key_rows = dev_read_u32_default(dev, "keypad,num-rows", 0);
168 	config->key_cols = dev_read_u32_default(dev, "keypad,num-columns", 0);
169 	if (!config->key_rows || !config->key_cols ||
170 			config->key_rows * config->key_cols / 8
171 				> CROS_EC_KEYSCAN_COLS) {
172 		debug("%s: Invalid key matrix size %d x %d\n", __func__,
173 		      config->key_rows, config->key_cols);
174 		return -1;
175 	}
176 	config->ghost_filter = dev_read_bool(dev, "google,needs-ghost-filter");
177 
178 	return 0;
179 }
180 
181 static int cros_ec_kbd_probe(struct udevice *dev)
182 {
183 	struct cros_ec_keyb_priv *priv = dev_get_priv(dev);
184 	struct keyboard_priv *uc_priv = dev_get_uclass_priv(dev);
185 	struct stdio_dev *sdev = &uc_priv->sdev;
186 	struct input_config *input = &uc_priv->input;
187 	int ret;
188 
189 	ret = cros_ec_keyb_decode_fdt(dev, priv);
190 	if (ret) {
191 		debug("%s: Cannot decode node (ret=%d)\n", __func__, ret);
192 		return -EINVAL;
193 	}
194 	input_set_delays(input, KBC_REPEAT_DELAY_MS, KBC_REPEAT_RATE_MS);
195 	ret = key_matrix_init(&priv->matrix, priv->key_rows, priv->key_cols,
196 			      priv->ghost_filter);
197 	if (ret) {
198 		debug("%s: cannot init key matrix\n", __func__);
199 		return ret;
200 	}
201 	ret = key_matrix_decode_fdt(dev, &priv->matrix);
202 	if (ret) {
203 		debug("%s: Could not decode key matrix from fdt\n", __func__);
204 		return ret;
205 	}
206 	debug("%s: Matrix keyboard %dx%d ready\n", __func__, priv->key_rows,
207 	      priv->key_cols);
208 
209 	priv->input = input;
210 	input->dev = dev;
211 	input_add_tables(input, false);
212 	input->read_keys = cros_ec_kbc_check;
213 	strcpy(sdev->name, "cros-ec-keyb");
214 
215 	/* Register the device. cros_ec_init_keyboard() will be called soon */
216 	return input_stdio_register(sdev);
217 }
218 
219 static const struct keyboard_ops cros_ec_kbd_ops = {
220 };
221 
222 static const struct udevice_id cros_ec_kbd_ids[] = {
223 	{ .compatible = "google,cros-ec-keyb" },
224 	{ }
225 };
226 
227 U_BOOT_DRIVER(cros_ec_kbd) = {
228 	.name	= "cros_ec_kbd",
229 	.id	= UCLASS_KEYBOARD,
230 	.of_match = cros_ec_kbd_ids,
231 	.probe = cros_ec_kbd_probe,
232 	.ops	= &cros_ec_kbd_ops,
233 	.priv_auto_alloc_size = sizeof(struct cros_ec_keyb_priv),
234 };
235