xref: /openbmc/u-boot/drivers/i2c/tegra_i2c.c (revision 9b914727)
1 /*
2  * Copyright (c) 2012 The Chromium OS Authors. All rights reserved.
3  * Copyright (c) 2010-2011 NVIDIA Corporation
4  *  NVIDIA Corporation <www.nvidia.com>
5  *
6  * See file CREDITS for list of people who contributed to this
7  * project.
8  *
9  * This program is free software; you can redistribute it and/or
10  * modify it under the terms of the GNU General Public License as
11  * published by the Free Software Foundation; either version 2 of
12  * the License, or (at your option) any later version.
13  *
14  * This program is distributed in the hope that it will be useful,
15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  * GNU General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
22  * MA 02111-1307 USA
23  */
24 
25 #include <common.h>
26 #include <fdtdec.h>
27 #include <i2c.h>
28 #include <asm/io.h>
29 #include <asm/arch/clk_rst.h>
30 #include <asm/arch/clock.h>
31 #include <asm/arch/funcmux.h>
32 #include <asm/arch/gpio.h>
33 #include <asm/arch/pinmux.h>
34 #include <asm/arch/tegra_i2c.h>
35 
36 DECLARE_GLOBAL_DATA_PTR;
37 
38 static unsigned int i2c_bus_num;
39 
40 /* Information about i2c controller */
41 struct i2c_bus {
42 	int			id;
43 	enum periph_id		periph_id;
44 	int			speed;
45 	int			pinmux_config;
46 	struct i2c_control	*control;
47 	struct i2c_ctlr		*regs;
48 	int			is_dvc;	/* DVC type, rather than I2C */
49 	int			inited;	/* bus is inited */
50 };
51 
52 static struct i2c_bus i2c_controllers[TEGRA_I2C_NUM_CONTROLLERS];
53 
54 static void set_packet_mode(struct i2c_bus *i2c_bus)
55 {
56 	u32 config;
57 
58 	config = I2C_CNFG_NEW_MASTER_FSM_MASK | I2C_CNFG_PACKET_MODE_MASK;
59 
60 	if (i2c_bus->is_dvc) {
61 		struct dvc_ctlr *dvc = (struct dvc_ctlr *)i2c_bus->regs;
62 
63 		writel(config, &dvc->cnfg);
64 	} else {
65 		writel(config, &i2c_bus->regs->cnfg);
66 		/*
67 		 * program I2C_SL_CNFG.NEWSL to ENABLE. This fixes probe
68 		 * issues, i.e., some slaves may be wrongly detected.
69 		 */
70 		setbits_le32(&i2c_bus->regs->sl_cnfg, I2C_SL_CNFG_NEWSL_MASK);
71 	}
72 }
73 
74 static void i2c_reset_controller(struct i2c_bus *i2c_bus)
75 {
76 	/* Reset I2C controller. */
77 	reset_periph(i2c_bus->periph_id, 1);
78 
79 	/* re-program config register to packet mode */
80 	set_packet_mode(i2c_bus);
81 }
82 
83 static void i2c_init_controller(struct i2c_bus *i2c_bus)
84 {
85 	/*
86 	 * Use PLLP - DP-04508-001_v06 datasheet indicates a divisor of 8
87 	 * here, in section 23.3.1, but in fact we seem to need a factor of
88 	 * 16 to get the right frequency.
89 	 */
90 	clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH,
91 			       i2c_bus->speed * 2 * 8);
92 
93 	/* Reset I2C controller. */
94 	i2c_reset_controller(i2c_bus);
95 
96 	/* Configure I2C controller. */
97 	if (i2c_bus->is_dvc) {	/* only for DVC I2C */
98 		struct dvc_ctlr *dvc = (struct dvc_ctlr *)i2c_bus->regs;
99 
100 		setbits_le32(&dvc->ctrl3, DVC_CTRL_REG3_I2C_HW_SW_PROG_MASK);
101 	}
102 
103 	funcmux_select(i2c_bus->periph_id, i2c_bus->pinmux_config);
104 }
105 
106 static void send_packet_headers(
107 	struct i2c_bus *i2c_bus,
108 	struct i2c_trans_info *trans,
109 	u32 packet_id)
110 {
111 	u32 data;
112 
113 	/* prepare header1: Header size = 0 Protocol = I2C, pktType = 0 */
114 	data = PROTOCOL_TYPE_I2C << PKT_HDR1_PROTOCOL_SHIFT;
115 	data |= packet_id << PKT_HDR1_PKT_ID_SHIFT;
116 	data |= i2c_bus->id << PKT_HDR1_CTLR_ID_SHIFT;
117 	writel(data, &i2c_bus->control->tx_fifo);
118 	debug("pkt header 1 sent (0x%x)\n", data);
119 
120 	/* prepare header2 */
121 	data = (trans->num_bytes - 1) << PKT_HDR2_PAYLOAD_SIZE_SHIFT;
122 	writel(data, &i2c_bus->control->tx_fifo);
123 	debug("pkt header 2 sent (0x%x)\n", data);
124 
125 	/* prepare IO specific header: configure the slave address */
126 	data = trans->address << PKT_HDR3_SLAVE_ADDR_SHIFT;
127 
128 	/* Enable Read if it is not a write transaction */
129 	if (!(trans->flags & I2C_IS_WRITE))
130 		data |= PKT_HDR3_READ_MODE_MASK;
131 
132 	/* Write I2C specific header */
133 	writel(data, &i2c_bus->control->tx_fifo);
134 	debug("pkt header 3 sent (0x%x)\n", data);
135 }
136 
137 static int wait_for_tx_fifo_empty(struct i2c_control *control)
138 {
139 	u32 count;
140 	int timeout_us = I2C_TIMEOUT_USEC;
141 
142 	while (timeout_us >= 0) {
143 		count = (readl(&control->fifo_status) & TX_FIFO_EMPTY_CNT_MASK)
144 				>> TX_FIFO_EMPTY_CNT_SHIFT;
145 		if (count == I2C_FIFO_DEPTH)
146 			return 1;
147 		udelay(10);
148 		timeout_us -= 10;
149 	}
150 
151 	return 0;
152 }
153 
154 static int wait_for_rx_fifo_notempty(struct i2c_control *control)
155 {
156 	u32 count;
157 	int timeout_us = I2C_TIMEOUT_USEC;
158 
159 	while (timeout_us >= 0) {
160 		count = (readl(&control->fifo_status) & TX_FIFO_FULL_CNT_MASK)
161 				>> TX_FIFO_FULL_CNT_SHIFT;
162 		if (count)
163 			return 1;
164 		udelay(10);
165 		timeout_us -= 10;
166 	}
167 
168 	return 0;
169 }
170 
171 static int wait_for_transfer_complete(struct i2c_control *control)
172 {
173 	int int_status;
174 	int timeout_us = I2C_TIMEOUT_USEC;
175 
176 	while (timeout_us >= 0) {
177 		int_status = readl(&control->int_status);
178 		if (int_status & I2C_INT_NO_ACK_MASK)
179 			return -int_status;
180 		if (int_status & I2C_INT_ARBITRATION_LOST_MASK)
181 			return -int_status;
182 		if (int_status & I2C_INT_XFER_COMPLETE_MASK)
183 			return 0;
184 
185 		udelay(10);
186 		timeout_us -= 10;
187 	}
188 
189 	return -1;
190 }
191 
192 static int send_recv_packets(struct i2c_bus *i2c_bus,
193 			     struct i2c_trans_info *trans)
194 {
195 	struct i2c_control *control = i2c_bus->control;
196 	u32 int_status;
197 	u32 words;
198 	u8 *dptr;
199 	u32 local;
200 	uchar last_bytes;
201 	int error = 0;
202 	int is_write = trans->flags & I2C_IS_WRITE;
203 
204 	/* clear status from previous transaction, XFER_COMPLETE, NOACK, etc. */
205 	int_status = readl(&control->int_status);
206 	writel(int_status, &control->int_status);
207 
208 	send_packet_headers(i2c_bus, trans, 1);
209 
210 	words = DIV_ROUND_UP(trans->num_bytes, 4);
211 	last_bytes = trans->num_bytes & 3;
212 	dptr = trans->buf;
213 
214 	while (words) {
215 		u32 *wptr = (u32 *)dptr;
216 
217 		if (is_write) {
218 			/* deal with word alignment */
219 			if ((unsigned)dptr & 3) {
220 				memcpy(&local, dptr, sizeof(u32));
221 				writel(local, &control->tx_fifo);
222 				debug("pkt data sent (0x%x)\n", local);
223 			} else {
224 				writel(*wptr, &control->tx_fifo);
225 				debug("pkt data sent (0x%x)\n", *wptr);
226 			}
227 			if (!wait_for_tx_fifo_empty(control)) {
228 				error = -1;
229 				goto exit;
230 			}
231 		} else {
232 			if (!wait_for_rx_fifo_notempty(control)) {
233 				error = -1;
234 				goto exit;
235 			}
236 			/*
237 			 * for the last word, we read into our local buffer,
238 			 * in case that caller did not provide enough buffer.
239 			 */
240 			local = readl(&control->rx_fifo);
241 			if ((words == 1) && last_bytes)
242 				memcpy(dptr, (char *)&local, last_bytes);
243 			else if ((unsigned)dptr & 3)
244 				memcpy(dptr, &local, sizeof(u32));
245 			else
246 				*wptr = local;
247 			debug("pkt data received (0x%x)\n", local);
248 		}
249 		words--;
250 		dptr += sizeof(u32);
251 	}
252 
253 	if (wait_for_transfer_complete(control)) {
254 		error = -1;
255 		goto exit;
256 	}
257 	return 0;
258 exit:
259 	/* error, reset the controller. */
260 	i2c_reset_controller(i2c_bus);
261 
262 	return error;
263 }
264 
265 static int tegra_i2c_write_data(u32 addr, u8 *data, u32 len)
266 {
267 	int error;
268 	struct i2c_trans_info trans_info;
269 
270 	trans_info.address = addr;
271 	trans_info.buf = data;
272 	trans_info.flags = I2C_IS_WRITE;
273 	trans_info.num_bytes = len;
274 	trans_info.is_10bit_address = 0;
275 
276 	error = send_recv_packets(&i2c_controllers[i2c_bus_num], &trans_info);
277 	if (error)
278 		debug("tegra_i2c_write_data: Error (%d) !!!\n", error);
279 
280 	return error;
281 }
282 
283 static int tegra_i2c_read_data(u32 addr, u8 *data, u32 len)
284 {
285 	int error;
286 	struct i2c_trans_info trans_info;
287 
288 	trans_info.address = addr | 1;
289 	trans_info.buf = data;
290 	trans_info.flags = 0;
291 	trans_info.num_bytes = len;
292 	trans_info.is_10bit_address = 0;
293 
294 	error = send_recv_packets(&i2c_controllers[i2c_bus_num], &trans_info);
295 	if (error)
296 		debug("tegra_i2c_read_data: Error (%d) !!!\n", error);
297 
298 	return error;
299 }
300 
301 #ifndef CONFIG_OF_CONTROL
302 #error "Please enable device tree support to use this driver"
303 #endif
304 
305 unsigned int i2c_get_bus_speed(void)
306 {
307 	return i2c_controllers[i2c_bus_num].speed;
308 }
309 
310 int i2c_set_bus_speed(unsigned int speed)
311 {
312 	struct i2c_bus *i2c_bus;
313 
314 	i2c_bus = &i2c_controllers[i2c_bus_num];
315 	i2c_bus->speed = speed;
316 	i2c_init_controller(i2c_bus);
317 
318 	return 0;
319 }
320 
321 static int i2c_get_config(const void *blob, int node, struct i2c_bus *i2c_bus)
322 {
323 	i2c_bus->regs = (struct i2c_ctlr *)fdtdec_get_addr(blob, node, "reg");
324 
325 	/*
326 	 * We don't have a binding for pinmux yet. Leave it out for now. So
327 	 * far no one needs anything other than the default.
328 	 */
329 	i2c_bus->pinmux_config = FUNCMUX_DEFAULT;
330 	i2c_bus->speed = fdtdec_get_int(blob, node, "clock-frequency", 0);
331 	i2c_bus->periph_id = clock_decode_periph_id(blob, node);
332 
333 	/*
334 	 * We can't specify the pinmux config in the fdt, so I2C2 will not
335 	 * work on Seaboard. It normally has no devices on it anyway.
336 	 * You could add in this little hack if you need to use it.
337 	 * The correct solution is a pinmux binding in the fdt.
338 	 *
339 	 *	if (i2c_bus->periph_id == PERIPH_ID_I2C2)
340 	 *		i2c_bus->pinmux_config = FUNCMUX_I2C2_PTA;
341 	 */
342 	if (i2c_bus->periph_id == -1)
343 		return -FDT_ERR_NOTFOUND;
344 
345 	return 0;
346 }
347 
348 /*
349  * Process a list of nodes, adding them to our list of I2C ports.
350  *
351  * @param blob		fdt blob
352  * @param node_list	list of nodes to process (any <=0 are ignored)
353  * @param count		number of nodes to process
354  * @param is_dvc	1 if these are DVC ports, 0 if standard I2C
355  * @return 0 if ok, -1 on error
356  */
357 static int process_nodes(const void *blob, int node_list[], int count,
358 			 int is_dvc)
359 {
360 	struct i2c_bus *i2c_bus;
361 	int i;
362 
363 	/* build the i2c_controllers[] for each controller */
364 	for (i = 0; i < count; i++) {
365 		int node = node_list[i];
366 
367 		if (node <= 0)
368 			continue;
369 
370 		i2c_bus = &i2c_controllers[i];
371 		i2c_bus->id = i;
372 
373 		if (i2c_get_config(blob, node, i2c_bus)) {
374 			printf("i2c_init_board: failed to decode bus %d\n", i);
375 			return -1;
376 		}
377 
378 		i2c_bus->is_dvc = is_dvc;
379 		if (is_dvc) {
380 			i2c_bus->control =
381 				&((struct dvc_ctlr *)i2c_bus->regs)->control;
382 		} else {
383 			i2c_bus->control = &i2c_bus->regs->control;
384 		}
385 		debug("%s: controller bus %d at %p, periph_id %d, speed %d: ",
386 		      is_dvc ? "dvc" : "i2c", i, i2c_bus->regs,
387 		      i2c_bus->periph_id, i2c_bus->speed);
388 		i2c_init_controller(i2c_bus);
389 		debug("ok\n");
390 		i2c_bus->inited = 1;
391 
392 		/* Mark position as used */
393 		node_list[i] = -1;
394 	}
395 
396 	return 0;
397 }
398 
399 /* Sadly there is no error return from this function */
400 void i2c_init_board(void)
401 {
402 	int node_list[TEGRA_I2C_NUM_CONTROLLERS];
403 	const void *blob = gd->fdt_blob;
404 	int count;
405 
406 	/* First get the normal i2c ports */
407 	count = fdtdec_find_aliases_for_id(blob, "i2c",
408 			COMPAT_NVIDIA_TEGRA20_I2C, node_list,
409 			TEGRA_I2C_NUM_CONTROLLERS);
410 	if (process_nodes(blob, node_list, count, 0))
411 		return;
412 
413 	/* Now look for dvc ports */
414 	count = fdtdec_add_aliases_for_id(blob, "i2c",
415 			COMPAT_NVIDIA_TEGRA20_DVC, node_list,
416 			TEGRA_I2C_NUM_CONTROLLERS);
417 	if (process_nodes(blob, node_list, count, 1))
418 		return;
419 }
420 
421 void i2c_init(int speed, int slaveaddr)
422 {
423 	/* This will override the speed selected in the fdt for that port */
424 	debug("i2c_init(speed=%u, slaveaddr=0x%x)\n", speed, slaveaddr);
425 	i2c_set_bus_speed(speed);
426 }
427 
428 /* i2c write version without the register address */
429 int i2c_write_data(uchar chip, uchar *buffer, int len)
430 {
431 	int rc;
432 
433 	debug("i2c_write_data: chip=0x%x, len=0x%x\n", chip, len);
434 	debug("write_data: ");
435 	/* use rc for counter */
436 	for (rc = 0; rc < len; ++rc)
437 		debug(" 0x%02x", buffer[rc]);
438 	debug("\n");
439 
440 	/* Shift 7-bit address over for lower-level i2c functions */
441 	rc = tegra_i2c_write_data(chip << 1, buffer, len);
442 	if (rc)
443 		debug("i2c_write_data(): rc=%d\n", rc);
444 
445 	return rc;
446 }
447 
448 /* i2c read version without the register address */
449 int i2c_read_data(uchar chip, uchar *buffer, int len)
450 {
451 	int rc;
452 
453 	debug("inside i2c_read_data():\n");
454 	/* Shift 7-bit address over for lower-level i2c functions */
455 	rc = tegra_i2c_read_data(chip << 1, buffer, len);
456 	if (rc) {
457 		debug("i2c_read_data(): rc=%d\n", rc);
458 		return rc;
459 	}
460 
461 	debug("i2c_read_data: ");
462 	/* reuse rc for counter*/
463 	for (rc = 0; rc < len; ++rc)
464 		debug(" 0x%02x", buffer[rc]);
465 	debug("\n");
466 
467 	return 0;
468 }
469 
470 /* Probe to see if a chip is present. */
471 int i2c_probe(uchar chip)
472 {
473 	int rc;
474 	uchar reg;
475 
476 	debug("i2c_probe: addr=0x%x\n", chip);
477 	reg = 0;
478 	rc = i2c_write_data(chip, &reg, 1);
479 	if (rc) {
480 		debug("Error probing 0x%x.\n", chip);
481 		return 1;
482 	}
483 	return 0;
484 }
485 
486 static int i2c_addr_ok(const uint addr, const int alen)
487 {
488 	/* We support 7 or 10 bit addresses, so one or two bytes each */
489 	return alen == 1 || alen == 2;
490 }
491 
492 /* Read bytes */
493 int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
494 {
495 	uint offset;
496 	int i;
497 
498 	debug("i2c_read: chip=0x%x, addr=0x%x, len=0x%x\n",
499 				chip, addr, len);
500 	if (!i2c_addr_ok(addr, alen)) {
501 		debug("i2c_read: Bad address %x.%d.\n", addr, alen);
502 		return 1;
503 	}
504 	for (offset = 0; offset < len; offset++) {
505 		if (alen) {
506 			uchar data[alen];
507 			for (i = 0; i < alen; i++) {
508 				data[alen - i - 1] =
509 					(addr + offset) >> (8 * i);
510 			}
511 			if (i2c_write_data(chip, data, alen)) {
512 				debug("i2c_read: error sending (0x%x)\n",
513 					addr);
514 				return 1;
515 			}
516 		}
517 		if (i2c_read_data(chip, buffer + offset, 1)) {
518 			debug("i2c_read: error reading (0x%x)\n", addr);
519 			return 1;
520 		}
521 	}
522 
523 	return 0;
524 }
525 
526 /* Write bytes */
527 int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
528 {
529 	uint offset;
530 	int i;
531 
532 	debug("i2c_write: chip=0x%x, addr=0x%x, len=0x%x\n",
533 				chip, addr, len);
534 	if (!i2c_addr_ok(addr, alen)) {
535 		debug("i2c_write: Bad address %x.%d.\n", addr, alen);
536 		return 1;
537 	}
538 	for (offset = 0; offset < len; offset++) {
539 		uchar data[alen + 1];
540 		for (i = 0; i < alen; i++)
541 			data[alen - i - 1] = (addr + offset) >> (8 * i);
542 		data[alen] = buffer[offset];
543 		if (i2c_write_data(chip, data, alen + 1)) {
544 			debug("i2c_write: error sending (0x%x)\n", addr);
545 			return 1;
546 		}
547 	}
548 
549 	return 0;
550 }
551 
552 #if defined(CONFIG_I2C_MULTI_BUS)
553 /*
554  * Functions for multiple I2C bus handling
555  */
556 unsigned int i2c_get_bus_num(void)
557 {
558 	return i2c_bus_num;
559 }
560 
561 int i2c_set_bus_num(unsigned int bus)
562 {
563 	if (bus >= TEGRA_I2C_NUM_CONTROLLERS || !i2c_controllers[bus].inited)
564 		return -1;
565 	i2c_bus_num = bus;
566 
567 	return 0;
568 }
569 #endif
570 
571 int tegra_i2c_get_dvc_bus_num(void)
572 {
573 	int i;
574 
575 	for (i = 0; i < CONFIG_SYS_MAX_I2C_BUS; i++) {
576 		struct i2c_bus *bus = &i2c_controllers[i];
577 
578 		if (bus->inited && bus->is_dvc)
579 			return i;
580 	}
581 
582 	return -1;
583 }
584