1 /* 2 * Basic I2C functions 3 * 4 * Copyright (c) 2004 Texas Instruments 5 * 6 * This package is free software; you can redistribute it and/or 7 * modify it under the terms of the license found in the file 8 * named COPYING that should have accompanied this file. 9 * 10 * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR 11 * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED 12 * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. 13 * 14 * Author: Jian Zhang jzhang@ti.com, Texas Instruments 15 * 16 * Copyright (c) 2003 Wolfgang Denk, wd@denx.de 17 * Rewritten to fit into the current U-Boot framework 18 * 19 * Adapted for OMAP2420 I2C, r-woodruff2@ti.com 20 * 21 */ 22 23 #include <common.h> 24 25 #include <asm/arch/i2c.h> 26 #include <asm/io.h> 27 28 #include "omap24xx_i2c.h" 29 30 DECLARE_GLOBAL_DATA_PTR; 31 32 #define I2C_TIMEOUT 1000 33 34 static void wait_for_bb (void); 35 static u16 wait_for_pin (void); 36 static void flush_fifo(void); 37 38 static struct i2c *i2c_base = (struct i2c *)I2C_DEFAULT_BASE; 39 40 static unsigned int bus_initialized[I2C_BUS_MAX]; 41 static unsigned int current_bus; 42 43 void i2c_init (int speed, int slaveadd) 44 { 45 int psc, fsscll, fssclh; 46 int hsscll = 0, hssclh = 0; 47 u32 scll, sclh; 48 int timeout = I2C_TIMEOUT; 49 50 /* Only handle standard, fast and high speeds */ 51 if ((speed != OMAP_I2C_STANDARD) && 52 (speed != OMAP_I2C_FAST_MODE) && 53 (speed != OMAP_I2C_HIGH_SPEED)) { 54 printf("Error : I2C unsupported speed %d\n", speed); 55 return; 56 } 57 58 psc = I2C_IP_CLK / I2C_INTERNAL_SAMPLING_CLK; 59 psc -= 1; 60 if (psc < I2C_PSC_MIN) { 61 printf("Error : I2C unsupported prescalar %d\n", psc); 62 return; 63 } 64 65 if (speed == OMAP_I2C_HIGH_SPEED) { 66 /* High speed */ 67 68 /* For first phase of HS mode */ 69 fsscll = fssclh = I2C_INTERNAL_SAMPLING_CLK / 70 (2 * OMAP_I2C_FAST_MODE); 71 72 fsscll -= I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM; 73 fssclh -= I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM; 74 if (((fsscll < 0) || (fssclh < 0)) || 75 ((fsscll > 255) || (fssclh > 255))) { 76 printf("Error : I2C initializing first phase clock\n"); 77 return; 78 } 79 80 /* For second phase of HS mode */ 81 hsscll = hssclh = I2C_INTERNAL_SAMPLING_CLK / (2 * speed); 82 83 hsscll -= I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM; 84 hssclh -= I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM; 85 if (((fsscll < 0) || (fssclh < 0)) || 86 ((fsscll > 255) || (fssclh > 255))) { 87 printf("Error : I2C initializing second phase clock\n"); 88 return; 89 } 90 91 scll = (unsigned int)hsscll << 8 | (unsigned int)fsscll; 92 sclh = (unsigned int)hssclh << 8 | (unsigned int)fssclh; 93 94 } else { 95 /* Standard and fast speed */ 96 fsscll = fssclh = I2C_INTERNAL_SAMPLING_CLK / (2 * speed); 97 98 fsscll -= I2C_FASTSPEED_SCLL_TRIM; 99 fssclh -= I2C_FASTSPEED_SCLH_TRIM; 100 if (((fsscll < 0) || (fssclh < 0)) || 101 ((fsscll > 255) || (fssclh > 255))) { 102 printf("Error : I2C initializing clock\n"); 103 return; 104 } 105 106 scll = (unsigned int)fsscll; 107 sclh = (unsigned int)fssclh; 108 } 109 110 if (readw (&i2c_base->con) & I2C_CON_EN) { 111 writew (0, &i2c_base->con); 112 udelay (50000); 113 } 114 115 writew(0x2, &i2c_base->sysc); /* for ES2 after soft reset */ 116 udelay(1000); 117 118 writew(I2C_CON_EN, &i2c_base->con); 119 while (!(readw(&i2c_base->syss) & I2C_SYSS_RDONE) && timeout--) { 120 if (timeout <= 0) { 121 printf("ERROR: Timeout in soft-reset\n"); 122 return; 123 } 124 udelay(1000); 125 } 126 127 writew(0, &i2c_base->con); 128 writew(psc, &i2c_base->psc); 129 writew(scll, &i2c_base->scll); 130 writew(sclh, &i2c_base->sclh); 131 132 /* own address */ 133 writew (slaveadd, &i2c_base->oa); 134 writew (I2C_CON_EN, &i2c_base->con); 135 136 /* have to enable intrrupts or OMAP i2c module doesn't work */ 137 writew (I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE | 138 I2C_IE_NACK_IE | I2C_IE_AL_IE, &i2c_base->ie); 139 udelay (1000); 140 flush_fifo(); 141 writew (0xFFFF, &i2c_base->stat); 142 writew (0, &i2c_base->cnt); 143 144 if (gd->flags & GD_FLG_RELOC) 145 bus_initialized[current_bus] = 1; 146 } 147 148 static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value) 149 { 150 int i2c_error = 0; 151 u16 status; 152 153 /* wait until bus not busy */ 154 wait_for_bb (); 155 156 /* one byte only */ 157 writew (1, &i2c_base->cnt); 158 /* set slave address */ 159 writew (devaddr, &i2c_base->sa); 160 /* no stop bit needed here */ 161 writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX, &i2c_base->con); 162 163 /* send register offset */ 164 while (1) { 165 status = wait_for_pin(); 166 if (status == 0 || status & I2C_STAT_NACK) { 167 i2c_error = 1; 168 goto read_exit; 169 } 170 if (status & I2C_STAT_XRDY) { 171 /* Important: have to use byte access */ 172 writeb(regoffset, &i2c_base->data); 173 writew(I2C_STAT_XRDY, &i2c_base->stat); 174 } 175 if (status & I2C_STAT_ARDY) { 176 writew(I2C_STAT_ARDY, &i2c_base->stat); 177 break; 178 } 179 } 180 181 /* set slave address */ 182 writew(devaddr, &i2c_base->sa); 183 /* read one byte from slave */ 184 writew(1, &i2c_base->cnt); 185 /* need stop bit here */ 186 writew(I2C_CON_EN | I2C_CON_MST | 187 I2C_CON_STT | I2C_CON_STP, 188 &i2c_base->con); 189 190 /* receive data */ 191 while (1) { 192 status = wait_for_pin(); 193 if (status == 0 || status & I2C_STAT_NACK) { 194 i2c_error = 1; 195 goto read_exit; 196 } 197 if (status & I2C_STAT_RRDY) { 198 #if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \ 199 defined(CONFIG_OMAP44XX) 200 *value = readb(&i2c_base->data); 201 #else 202 *value = readw(&i2c_base->data); 203 #endif 204 writew(I2C_STAT_RRDY, &i2c_base->stat); 205 } 206 if (status & I2C_STAT_ARDY) { 207 writew(I2C_STAT_ARDY, &i2c_base->stat); 208 break; 209 } 210 } 211 212 read_exit: 213 flush_fifo(); 214 writew (0xFFFF, &i2c_base->stat); 215 writew (0, &i2c_base->cnt); 216 return i2c_error; 217 } 218 219 static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value) 220 { 221 int i2c_error = 0; 222 u16 status; 223 224 /* wait until bus not busy */ 225 wait_for_bb (); 226 227 /* two bytes */ 228 writew (2, &i2c_base->cnt); 229 /* set slave address */ 230 writew (devaddr, &i2c_base->sa); 231 /* stop bit needed here */ 232 writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX | 233 I2C_CON_STP, &i2c_base->con); 234 235 while (1) { 236 status = wait_for_pin(); 237 if (status == 0 || status & I2C_STAT_NACK) { 238 i2c_error = 1; 239 goto write_exit; 240 } 241 if (status & I2C_STAT_XRDY) { 242 #if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \ 243 defined(CONFIG_OMAP44XX) 244 /* send register offset */ 245 writeb(regoffset, &i2c_base->data); 246 writew(I2C_STAT_XRDY, &i2c_base->stat); 247 248 while (1) { 249 status = wait_for_pin(); 250 if (status == 0 || status & I2C_STAT_NACK) { 251 i2c_error = 1; 252 goto write_exit; 253 } 254 if (status & I2C_STAT_XRDY) { 255 /* send data */ 256 writeb(value, &i2c_base->data); 257 writew(I2C_STAT_XRDY, &i2c_base->stat); 258 } 259 if (status & I2C_STAT_ARDY) { 260 writew(I2C_STAT_ARDY, &i2c_base->stat); 261 break; 262 } 263 } 264 break; 265 #else 266 /* send out two bytes */ 267 writew((value << 8) + regoffset, &i2c_base->data); 268 writew(I2C_STAT_XRDY, &i2c_base->stat); 269 #endif 270 } 271 if (status & I2C_STAT_ARDY) { 272 writew(I2C_STAT_ARDY, &i2c_base->stat); 273 break; 274 } 275 } 276 277 wait_for_bb(); 278 279 status = readw(&i2c_base->stat); 280 if (status & I2C_STAT_NACK) 281 i2c_error = 1; 282 283 write_exit: 284 flush_fifo(); 285 writew (0xFFFF, &i2c_base->stat); 286 writew (0, &i2c_base->cnt); 287 return i2c_error; 288 } 289 290 static void flush_fifo(void) 291 { u16 stat; 292 293 /* note: if you try and read data when its not there or ready 294 * you get a bus error 295 */ 296 while(1){ 297 stat = readw(&i2c_base->stat); 298 if(stat == I2C_STAT_RRDY){ 299 #if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \ 300 defined(CONFIG_OMAP44XX) 301 readb(&i2c_base->data); 302 #else 303 readw(&i2c_base->data); 304 #endif 305 writew(I2C_STAT_RRDY,&i2c_base->stat); 306 udelay(1000); 307 }else 308 break; 309 } 310 } 311 312 int i2c_probe (uchar chip) 313 { 314 u16 status; 315 int res = 1; /* default = fail */ 316 317 if (chip == readw (&i2c_base->oa)) { 318 return res; 319 } 320 321 /* wait until bus not busy */ 322 wait_for_bb (); 323 324 /* try to write one byte */ 325 writew (1, &i2c_base->cnt); 326 /* set slave address */ 327 writew (chip, &i2c_base->sa); 328 /* stop bit needed here */ 329 writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX | 330 I2C_CON_STP, &i2c_base->con); 331 332 status = wait_for_pin(); 333 334 /* check for ACK (!NAK) */ 335 if (!(status & I2C_STAT_NACK)) 336 res = 0; 337 338 /* abort transfer (force idle state) */ 339 writew(0, &i2c_base->con); 340 341 flush_fifo(); 342 writew (0, &i2c_base->cnt); /* don't allow any more data in...we don't want it.*/ 343 writew(0xFFFF, &i2c_base->stat); 344 return res; 345 } 346 347 int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len) 348 { 349 int i; 350 351 if (alen > 1) { 352 printf ("I2C read: addr len %d not supported\n", alen); 353 return 1; 354 } 355 356 if (addr + len > 256) { 357 printf ("I2C read: address out of range\n"); 358 return 1; 359 } 360 361 for (i = 0; i < len; i++) { 362 if (i2c_read_byte (chip, addr + i, &buffer[i])) { 363 printf ("I2C read: I/O error\n"); 364 i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); 365 return 1; 366 } 367 } 368 369 return 0; 370 } 371 372 int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len) 373 { 374 int i; 375 376 if (alen > 1) { 377 printf ("I2C read: addr len %d not supported\n", alen); 378 return 1; 379 } 380 381 if (addr + len > 256) { 382 printf ("I2C read: address out of range\n"); 383 return 1; 384 } 385 386 for (i = 0; i < len; i++) { 387 if (i2c_write_byte (chip, addr + i, buffer[i])) { 388 printf ("I2C read: I/O error\n"); 389 i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); 390 return 1; 391 } 392 } 393 394 return 0; 395 } 396 397 static void wait_for_bb (void) 398 { 399 int timeout = I2C_TIMEOUT; 400 u16 stat; 401 402 writew(0xFFFF, &i2c_base->stat); /* clear current interrupts...*/ 403 while ((stat = readw (&i2c_base->stat) & I2C_STAT_BB) && timeout--) { 404 writew (stat, &i2c_base->stat); 405 udelay(1000); 406 } 407 408 if (timeout <= 0) { 409 printf ("timed out in wait_for_bb: I2C_STAT=%x\n", 410 readw (&i2c_base->stat)); 411 } 412 writew(0xFFFF, &i2c_base->stat); /* clear delayed stuff*/ 413 } 414 415 static u16 wait_for_pin (void) 416 { 417 u16 status; 418 int timeout = I2C_TIMEOUT; 419 420 do { 421 udelay (1000); 422 status = readw (&i2c_base->stat); 423 } while ( !(status & 424 (I2C_STAT_ROVR | I2C_STAT_XUDF | I2C_STAT_XRDY | 425 I2C_STAT_RRDY | I2C_STAT_ARDY | I2C_STAT_NACK | 426 I2C_STAT_AL)) && timeout--); 427 428 if (timeout <= 0) { 429 printf ("timed out in wait_for_pin: I2C_STAT=%x\n", 430 readw (&i2c_base->stat)); 431 writew(0xFFFF, &i2c_base->stat); 432 status = 0; 433 } 434 435 return status; 436 } 437 438 int i2c_set_bus_num(unsigned int bus) 439 { 440 if ((bus < 0) || (bus >= I2C_BUS_MAX)) { 441 printf("Bad bus: %d\n", bus); 442 return -1; 443 } 444 445 #if I2C_BUS_MAX==3 446 if (bus == 2) 447 i2c_base = (struct i2c *)I2C_BASE3; 448 else 449 #endif 450 if (bus == 1) 451 i2c_base = (struct i2c *)I2C_BASE2; 452 else 453 i2c_base = (struct i2c *)I2C_BASE1; 454 455 current_bus = bus; 456 457 if(!bus_initialized[current_bus]) 458 i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); 459 460 return 0; 461 } 462 463 int i2c_get_bus_num(void) 464 { 465 return (int) current_bus; 466 } 467