1 /* 2 * i2c driver for Freescale i.MX series 3 * 4 * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> 5 * (c) 2011 Marek Vasut <marek.vasut@gmail.com> 6 * 7 * Based on i2c-imx.c from linux kernel: 8 * Copyright (C) 2005 Torsten Koschorrek <koschorrek at synertronixx.de> 9 * Copyright (C) 2005 Matthias Blaschke <blaschke at synertronixx.de> 10 * Copyright (C) 2007 RightHand Technologies, Inc. 11 * Copyright (C) 2008 Darius Augulis <darius.augulis at teltonika.lt> 12 * 13 * 14 * SPDX-License-Identifier: GPL-2.0+ 15 */ 16 17 #include <common.h> 18 #include <asm/arch/clock.h> 19 #include <asm/arch/imx-regs.h> 20 #include <asm/errno.h> 21 #include <asm/imx-common/mxc_i2c.h> 22 #include <asm/io.h> 23 #include <i2c.h> 24 #include <watchdog.h> 25 #include <dm.h> 26 #include <fdtdec.h> 27 28 DECLARE_GLOBAL_DATA_PTR; 29 30 #define I2C_QUIRK_FLAG (1 << 0) 31 32 #define IMX_I2C_REGSHIFT 2 33 #define VF610_I2C_REGSHIFT 0 34 /* Register index */ 35 #define IADR 0 36 #define IFDR 1 37 #define I2CR 2 38 #define I2SR 3 39 #define I2DR 4 40 41 #define I2CR_IIEN (1 << 6) 42 #define I2CR_MSTA (1 << 5) 43 #define I2CR_MTX (1 << 4) 44 #define I2CR_TX_NO_AK (1 << 3) 45 #define I2CR_RSTA (1 << 2) 46 47 #define I2SR_ICF (1 << 7) 48 #define I2SR_IBB (1 << 5) 49 #define I2SR_IAL (1 << 4) 50 #define I2SR_IIF (1 << 1) 51 #define I2SR_RX_NO_AK (1 << 0) 52 53 #ifdef I2C_QUIRK_REG 54 #define I2CR_IEN (0 << 7) 55 #define I2CR_IDIS (1 << 7) 56 #define I2SR_IIF_CLEAR (1 << 1) 57 #else 58 #define I2CR_IEN (1 << 7) 59 #define I2CR_IDIS (0 << 7) 60 #define I2SR_IIF_CLEAR (0 << 1) 61 #endif 62 63 #if defined(CONFIG_HARD_I2C) && !defined(CONFIG_SYS_I2C_BASE) 64 #error "define CONFIG_SYS_I2C_BASE to use the mxc_i2c driver" 65 #endif 66 67 #ifdef I2C_QUIRK_REG 68 static u16 i2c_clk_div[60][2] = { 69 { 20, 0x00 }, { 22, 0x01 }, { 24, 0x02 }, { 26, 0x03 }, 70 { 28, 0x04 }, { 30, 0x05 }, { 32, 0x09 }, { 34, 0x06 }, 71 { 36, 0x0A }, { 40, 0x07 }, { 44, 0x0C }, { 48, 0x0D }, 72 { 52, 0x43 }, { 56, 0x0E }, { 60, 0x45 }, { 64, 0x12 }, 73 { 68, 0x0F }, { 72, 0x13 }, { 80, 0x14 }, { 88, 0x15 }, 74 { 96, 0x19 }, { 104, 0x16 }, { 112, 0x1A }, { 128, 0x17 }, 75 { 136, 0x4F }, { 144, 0x1C }, { 160, 0x1D }, { 176, 0x55 }, 76 { 192, 0x1E }, { 208, 0x56 }, { 224, 0x22 }, { 228, 0x24 }, 77 { 240, 0x1F }, { 256, 0x23 }, { 288, 0x5C }, { 320, 0x25 }, 78 { 384, 0x26 }, { 448, 0x2A }, { 480, 0x27 }, { 512, 0x2B }, 79 { 576, 0x2C }, { 640, 0x2D }, { 768, 0x31 }, { 896, 0x32 }, 80 { 960, 0x2F }, { 1024, 0x33 }, { 1152, 0x34 }, { 1280, 0x35 }, 81 { 1536, 0x36 }, { 1792, 0x3A }, { 1920, 0x37 }, { 2048, 0x3B }, 82 { 2304, 0x3C }, { 2560, 0x3D }, { 3072, 0x3E }, { 3584, 0x7A }, 83 { 3840, 0x3F }, { 4096, 0x7B }, { 5120, 0x7D }, { 6144, 0x7E }, 84 }; 85 #else 86 static u16 i2c_clk_div[50][2] = { 87 { 22, 0x20 }, { 24, 0x21 }, { 26, 0x22 }, { 28, 0x23 }, 88 { 30, 0x00 }, { 32, 0x24 }, { 36, 0x25 }, { 40, 0x26 }, 89 { 42, 0x03 }, { 44, 0x27 }, { 48, 0x28 }, { 52, 0x05 }, 90 { 56, 0x29 }, { 60, 0x06 }, { 64, 0x2A }, { 72, 0x2B }, 91 { 80, 0x2C }, { 88, 0x09 }, { 96, 0x2D }, { 104, 0x0A }, 92 { 112, 0x2E }, { 128, 0x2F }, { 144, 0x0C }, { 160, 0x30 }, 93 { 192, 0x31 }, { 224, 0x32 }, { 240, 0x0F }, { 256, 0x33 }, 94 { 288, 0x10 }, { 320, 0x34 }, { 384, 0x35 }, { 448, 0x36 }, 95 { 480, 0x13 }, { 512, 0x37 }, { 576, 0x14 }, { 640, 0x38 }, 96 { 768, 0x39 }, { 896, 0x3A }, { 960, 0x17 }, { 1024, 0x3B }, 97 { 1152, 0x18 }, { 1280, 0x3C }, { 1536, 0x3D }, { 1792, 0x3E }, 98 { 1920, 0x1B }, { 2048, 0x3F }, { 2304, 0x1C }, { 2560, 0x1D }, 99 { 3072, 0x1E }, { 3840, 0x1F } 100 }; 101 #endif 102 103 #ifndef CONFIG_SYS_MXC_I2C1_SPEED 104 #define CONFIG_SYS_MXC_I2C1_SPEED 100000 105 #endif 106 #ifndef CONFIG_SYS_MXC_I2C2_SPEED 107 #define CONFIG_SYS_MXC_I2C2_SPEED 100000 108 #endif 109 #ifndef CONFIG_SYS_MXC_I2C3_SPEED 110 #define CONFIG_SYS_MXC_I2C3_SPEED 100000 111 #endif 112 #ifndef CONFIG_SYS_MXC_I2C4_SPEED 113 #define CONFIG_SYS_MXC_I2C4_SPEED 100000 114 #endif 115 116 #ifndef CONFIG_SYS_MXC_I2C1_SLAVE 117 #define CONFIG_SYS_MXC_I2C1_SLAVE 0 118 #endif 119 #ifndef CONFIG_SYS_MXC_I2C2_SLAVE 120 #define CONFIG_SYS_MXC_I2C2_SLAVE 0 121 #endif 122 #ifndef CONFIG_SYS_MXC_I2C3_SLAVE 123 #define CONFIG_SYS_MXC_I2C3_SLAVE 0 124 #endif 125 #ifndef CONFIG_SYS_MXC_I2C4_SLAVE 126 #define CONFIG_SYS_MXC_I2C4_SLAVE 0 127 #endif 128 129 /* 130 * Calculate and set proper clock divider 131 */ 132 static uint8_t i2c_imx_get_clk(struct mxc_i2c_bus *i2c_bus, unsigned int rate) 133 { 134 unsigned int i2c_clk_rate; 135 unsigned int div; 136 u8 clk_div; 137 138 #if defined(CONFIG_MX31) 139 struct clock_control_regs *sc_regs = 140 (struct clock_control_regs *)CCM_BASE; 141 142 /* start the required I2C clock */ 143 writel(readl(&sc_regs->cgr0) | (3 << CONFIG_SYS_I2C_CLK_OFFSET), 144 &sc_regs->cgr0); 145 #endif 146 147 /* Divider value calculation */ 148 i2c_clk_rate = mxc_get_clock(MXC_I2C_CLK); 149 div = (i2c_clk_rate + rate - 1) / rate; 150 if (div < i2c_clk_div[0][0]) 151 clk_div = 0; 152 else if (div > i2c_clk_div[ARRAY_SIZE(i2c_clk_div) - 1][0]) 153 clk_div = ARRAY_SIZE(i2c_clk_div) - 1; 154 else 155 for (clk_div = 0; i2c_clk_div[clk_div][0] < div; clk_div++) 156 ; 157 158 /* Store divider value */ 159 return clk_div; 160 } 161 162 /* 163 * Set I2C Bus speed 164 */ 165 static int bus_i2c_set_bus_speed(struct mxc_i2c_bus *i2c_bus, int speed) 166 { 167 ulong base = i2c_bus->base; 168 bool quirk = i2c_bus->driver_data & I2C_QUIRK_FLAG ? true : false; 169 u8 clk_idx = i2c_imx_get_clk(i2c_bus, speed); 170 u8 idx = i2c_clk_div[clk_idx][1]; 171 int reg_shift = quirk ? VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT; 172 173 if (!base) 174 return -ENODEV; 175 176 /* Store divider value */ 177 writeb(idx, base + (IFDR << reg_shift)); 178 179 /* Reset module */ 180 writeb(I2CR_IDIS, base + (I2CR << reg_shift)); 181 writeb(0, base + (I2SR << reg_shift)); 182 return 0; 183 } 184 185 #define ST_BUS_IDLE (0 | (I2SR_IBB << 8)) 186 #define ST_BUS_BUSY (I2SR_IBB | (I2SR_IBB << 8)) 187 #define ST_IIF (I2SR_IIF | (I2SR_IIF << 8)) 188 189 static int wait_for_sr_state(struct mxc_i2c_bus *i2c_bus, unsigned state) 190 { 191 unsigned sr; 192 ulong elapsed; 193 bool quirk = i2c_bus->driver_data & I2C_QUIRK_FLAG ? true : false; 194 int reg_shift = quirk ? VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT; 195 ulong base = i2c_bus->base; 196 ulong start_time = get_timer(0); 197 for (;;) { 198 sr = readb(base + (I2SR << reg_shift)); 199 if (sr & I2SR_IAL) { 200 if (quirk) 201 writeb(sr | I2SR_IAL, base + 202 (I2SR << reg_shift)); 203 else 204 writeb(sr & ~I2SR_IAL, base + 205 (I2SR << reg_shift)); 206 printf("%s: Arbitration lost sr=%x cr=%x state=%x\n", 207 __func__, sr, readb(base + (I2CR << reg_shift)), 208 state); 209 return -ERESTART; 210 } 211 if ((sr & (state >> 8)) == (unsigned char)state) 212 return sr; 213 WATCHDOG_RESET(); 214 elapsed = get_timer(start_time); 215 if (elapsed > (CONFIG_SYS_HZ / 10)) /* .1 seconds */ 216 break; 217 } 218 printf("%s: failed sr=%x cr=%x state=%x\n", __func__, 219 sr, readb(base + (I2CR << reg_shift)), state); 220 return -ETIMEDOUT; 221 } 222 223 static int tx_byte(struct mxc_i2c_bus *i2c_bus, u8 byte) 224 { 225 int ret; 226 int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ? 227 VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT; 228 ulong base = i2c_bus->base; 229 230 writeb(I2SR_IIF_CLEAR, base + (I2SR << reg_shift)); 231 writeb(byte, base + (I2DR << reg_shift)); 232 233 ret = wait_for_sr_state(i2c_bus, ST_IIF); 234 if (ret < 0) 235 return ret; 236 if (ret & I2SR_RX_NO_AK) 237 return -ENODEV; 238 return 0; 239 } 240 241 /* 242 * Stub implementations for outer i2c slave operations. 243 */ 244 void __i2c_force_reset_slave(void) 245 { 246 } 247 void i2c_force_reset_slave(void) 248 __attribute__((weak, alias("__i2c_force_reset_slave"))); 249 250 /* 251 * Stop I2C transaction 252 */ 253 static void i2c_imx_stop(struct mxc_i2c_bus *i2c_bus) 254 { 255 int ret; 256 int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ? 257 VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT; 258 ulong base = i2c_bus->base; 259 unsigned int temp = readb(base + (I2CR << reg_shift)); 260 261 temp &= ~(I2CR_MSTA | I2CR_MTX); 262 writeb(temp, base + (I2CR << reg_shift)); 263 ret = wait_for_sr_state(i2c_bus, ST_BUS_IDLE); 264 if (ret < 0) 265 printf("%s:trigger stop failed\n", __func__); 266 } 267 268 /* 269 * Send start signal, chip address and 270 * write register address 271 */ 272 static int i2c_init_transfer_(struct mxc_i2c_bus *i2c_bus, u8 chip, 273 u32 addr, int alen) 274 { 275 unsigned int temp; 276 int ret; 277 bool quirk = i2c_bus->driver_data & I2C_QUIRK_FLAG ? true : false; 278 ulong base = i2c_bus->base; 279 int reg_shift = quirk ? VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT; 280 281 /* Reset i2c slave */ 282 i2c_force_reset_slave(); 283 284 /* Enable I2C controller */ 285 if (quirk) 286 ret = readb(base + (I2CR << reg_shift)) & I2CR_IDIS; 287 else 288 ret = !(readb(base + (I2CR << reg_shift)) & I2CR_IEN); 289 290 if (ret) { 291 writeb(I2CR_IEN, base + (I2CR << reg_shift)); 292 /* Wait for controller to be stable */ 293 udelay(50); 294 } 295 296 if (readb(base + (IADR << reg_shift)) == (chip << 1)) 297 writeb((chip << 1) ^ 2, base + (IADR << reg_shift)); 298 writeb(I2SR_IIF_CLEAR, base + (I2SR << reg_shift)); 299 ret = wait_for_sr_state(i2c_bus, ST_BUS_IDLE); 300 if (ret < 0) 301 return ret; 302 303 /* Start I2C transaction */ 304 temp = readb(base + (I2CR << reg_shift)); 305 temp |= I2CR_MSTA; 306 writeb(temp, base + (I2CR << reg_shift)); 307 308 ret = wait_for_sr_state(i2c_bus, ST_BUS_BUSY); 309 if (ret < 0) 310 return ret; 311 312 temp |= I2CR_MTX | I2CR_TX_NO_AK; 313 writeb(temp, base + (I2CR << reg_shift)); 314 315 /* write slave address */ 316 ret = tx_byte(i2c_bus, chip << 1); 317 if (ret < 0) 318 return ret; 319 320 while (alen--) { 321 ret = tx_byte(i2c_bus, (addr >> (alen * 8)) & 0xff); 322 if (ret < 0) 323 return ret; 324 } 325 return 0; 326 } 327 328 #ifndef CONFIG_DM_I2C 329 int i2c_idle_bus(struct mxc_i2c_bus *i2c_bus) 330 { 331 if (i2c_bus && i2c_bus->idle_bus_fn) 332 return i2c_bus->idle_bus_fn(i2c_bus->idle_bus_data); 333 return 0; 334 } 335 #else 336 /* 337 * Since pinmux is not supported, implement a weak function here. 338 * You can implement your i2c_bus_idle in board file. When pinctrl 339 * is supported, this can be removed. 340 */ 341 int __i2c_idle_bus(struct mxc_i2c_bus *i2c_bus) 342 { 343 return 0; 344 } 345 346 int i2c_idle_bus(struct mxc_i2c_bus *i2c_bus) 347 __attribute__((weak, alias("__i2c_idle_bus"))); 348 #endif 349 350 static int i2c_init_transfer(struct mxc_i2c_bus *i2c_bus, u8 chip, 351 u32 addr, int alen) 352 { 353 int retry; 354 int ret; 355 int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ? 356 VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT; 357 358 if (!i2c_bus->base) 359 return -ENODEV; 360 361 for (retry = 0; retry < 3; retry++) { 362 ret = i2c_init_transfer_(i2c_bus, chip, addr, alen); 363 if (ret >= 0) 364 return 0; 365 i2c_imx_stop(i2c_bus); 366 if (ret == -ENODEV) 367 return ret; 368 369 printf("%s: failed for chip 0x%x retry=%d\n", __func__, chip, 370 retry); 371 if (ret != -ERESTART) 372 /* Disable controller */ 373 writeb(I2CR_IDIS, i2c_bus->base + (I2CR << reg_shift)); 374 udelay(100); 375 if (i2c_idle_bus(i2c_bus) < 0) 376 break; 377 } 378 printf("%s: give up i2c_regs=0x%lx\n", __func__, i2c_bus->base); 379 return ret; 380 } 381 382 383 static int i2c_write_data(struct mxc_i2c_bus *i2c_bus, u8 chip, const u8 *buf, 384 int len) 385 { 386 int i, ret = 0; 387 388 debug("i2c_write_data: chip=0x%x, len=0x%x\n", chip, len); 389 debug("write_data: "); 390 /* use rc for counter */ 391 for (i = 0; i < len; ++i) 392 debug(" 0x%02x", buf[i]); 393 debug("\n"); 394 395 for (i = 0; i < len; i++) { 396 ret = tx_byte(i2c_bus, buf[i]); 397 if (ret < 0) { 398 debug("i2c_write_data(): rc=%d\n", ret); 399 break; 400 } 401 } 402 403 return ret; 404 } 405 406 static int i2c_read_data(struct mxc_i2c_bus *i2c_bus, uchar chip, uchar *buf, 407 int len) 408 { 409 int ret; 410 unsigned int temp; 411 int i; 412 int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ? 413 VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT; 414 ulong base = i2c_bus->base; 415 416 debug("i2c_read_data: chip=0x%x, len=0x%x\n", chip, len); 417 418 /* setup bus to read data */ 419 temp = readb(base + (I2CR << reg_shift)); 420 temp &= ~(I2CR_MTX | I2CR_TX_NO_AK); 421 if (len == 1) 422 temp |= I2CR_TX_NO_AK; 423 writeb(temp, base + (I2CR << reg_shift)); 424 writeb(I2SR_IIF_CLEAR, base + (I2SR << reg_shift)); 425 /* dummy read to clear ICF */ 426 readb(base + (I2DR << reg_shift)); 427 428 /* read data */ 429 for (i = 0; i < len; i++) { 430 ret = wait_for_sr_state(i2c_bus, ST_IIF); 431 if (ret < 0) { 432 debug("i2c_read_data(): ret=%d\n", ret); 433 i2c_imx_stop(i2c_bus); 434 return ret; 435 } 436 437 /* 438 * It must generate STOP before read I2DR to prevent 439 * controller from generating another clock cycle 440 */ 441 if (i == (len - 1)) { 442 i2c_imx_stop(i2c_bus); 443 } else if (i == (len - 2)) { 444 temp = readb(base + (I2CR << reg_shift)); 445 temp |= I2CR_TX_NO_AK; 446 writeb(temp, base + (I2CR << reg_shift)); 447 } 448 writeb(I2SR_IIF_CLEAR, base + (I2SR << reg_shift)); 449 buf[i] = readb(base + (I2DR << reg_shift)); 450 } 451 452 /* reuse ret for counter*/ 453 for (ret = 0; ret < len; ++ret) 454 debug(" 0x%02x", buf[ret]); 455 debug("\n"); 456 457 i2c_imx_stop(i2c_bus); 458 return 0; 459 } 460 461 #ifndef CONFIG_DM_I2C 462 /* 463 * Read data from I2C device 464 */ 465 static int bus_i2c_read(struct mxc_i2c_bus *i2c_bus, u8 chip, u32 addr, 466 int alen, u8 *buf, int len) 467 { 468 int ret = 0; 469 u32 temp; 470 int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ? 471 VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT; 472 ulong base = i2c_bus->base; 473 474 ret = i2c_init_transfer(i2c_bus, chip, addr, alen); 475 if (ret < 0) 476 return ret; 477 478 temp = readb(base + (I2CR << reg_shift)); 479 temp |= I2CR_RSTA; 480 writeb(temp, base + (I2CR << reg_shift)); 481 482 ret = tx_byte(i2c_bus, (chip << 1) | 1); 483 if (ret < 0) { 484 i2c_imx_stop(i2c_bus); 485 return ret; 486 } 487 488 ret = i2c_read_data(i2c_bus, chip, buf, len); 489 490 i2c_imx_stop(i2c_bus); 491 return ret; 492 } 493 494 /* 495 * Write data to I2C device 496 */ 497 static int bus_i2c_write(struct mxc_i2c_bus *i2c_bus, u8 chip, u32 addr, 498 int alen, const u8 *buf, int len) 499 { 500 int ret = 0; 501 502 ret = i2c_init_transfer(i2c_bus, chip, addr, alen); 503 if (ret < 0) 504 return ret; 505 506 ret = i2c_write_data(i2c_bus, chip, buf, len); 507 508 i2c_imx_stop(i2c_bus); 509 510 return ret; 511 } 512 513 #if !defined(I2C2_BASE_ADDR) 514 #define I2C2_BASE_ADDR 0 515 #endif 516 517 #if !defined(I2C3_BASE_ADDR) 518 #define I2C3_BASE_ADDR 0 519 #endif 520 521 #if !defined(I2C4_BASE_ADDR) 522 #define I2C4_BASE_ADDR 0 523 #endif 524 525 static struct mxc_i2c_bus mxc_i2c_buses[] = { 526 #if defined(CONFIG_LS102XA) || defined(CONFIG_VF610) || \ 527 defined(CONFIG_FSL_LAYERSCAPE) 528 { 0, I2C1_BASE_ADDR, I2C_QUIRK_FLAG }, 529 { 1, I2C2_BASE_ADDR, I2C_QUIRK_FLAG }, 530 { 2, I2C3_BASE_ADDR, I2C_QUIRK_FLAG }, 531 { 3, I2C4_BASE_ADDR, I2C_QUIRK_FLAG }, 532 #else 533 { 0, I2C1_BASE_ADDR, 0 }, 534 { 1, I2C2_BASE_ADDR, 0 }, 535 { 2, I2C3_BASE_ADDR, 0 }, 536 { 3, I2C4_BASE_ADDR, 0 }, 537 #endif 538 }; 539 540 struct mxc_i2c_bus *i2c_get_base(struct i2c_adapter *adap) 541 { 542 return &mxc_i2c_buses[adap->hwadapnr]; 543 } 544 545 static int mxc_i2c_read(struct i2c_adapter *adap, uint8_t chip, 546 uint addr, int alen, uint8_t *buffer, 547 int len) 548 { 549 return bus_i2c_read(i2c_get_base(adap), chip, addr, alen, buffer, len); 550 } 551 552 static int mxc_i2c_write(struct i2c_adapter *adap, uint8_t chip, 553 uint addr, int alen, uint8_t *buffer, 554 int len) 555 { 556 return bus_i2c_write(i2c_get_base(adap), chip, addr, alen, buffer, len); 557 } 558 559 /* 560 * Test if a chip at a given address responds (probe the chip) 561 */ 562 static int mxc_i2c_probe(struct i2c_adapter *adap, uint8_t chip) 563 { 564 return bus_i2c_write(i2c_get_base(adap), chip, 0, 0, NULL, 0); 565 } 566 567 int __enable_i2c_clk(unsigned char enable, unsigned i2c_num) 568 { 569 return 1; 570 } 571 int enable_i2c_clk(unsigned char enable, unsigned i2c_num) 572 __attribute__((weak, alias("__enable_i2c_clk"))); 573 574 void bus_i2c_init(int index, int speed, int unused, 575 int (*idle_bus_fn)(void *p), void *idle_bus_data) 576 { 577 int ret; 578 579 if (index >= ARRAY_SIZE(mxc_i2c_buses)) { 580 debug("Error i2c index\n"); 581 return; 582 } 583 584 /* 585 * Warning: Be careful to allow the assignment to a static 586 * variable here. This function could be called while U-Boot is 587 * still running in flash memory. So such assignment is equal 588 * to write data to flash without erasing. 589 */ 590 if (idle_bus_fn) 591 mxc_i2c_buses[index].idle_bus_fn = idle_bus_fn; 592 if (idle_bus_data) 593 mxc_i2c_buses[index].idle_bus_data = idle_bus_data; 594 595 ret = enable_i2c_clk(1, index); 596 if (ret < 0) { 597 debug("I2C-%d clk fail to enable.\n", index); 598 return; 599 } 600 601 bus_i2c_set_bus_speed(&mxc_i2c_buses[index], speed); 602 } 603 604 /* 605 * Init I2C Bus 606 */ 607 static void mxc_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr) 608 { 609 bus_i2c_init(adap->hwadapnr, speed, slaveaddr, NULL, NULL); 610 } 611 612 /* 613 * Set I2C Speed 614 */ 615 static u32 mxc_i2c_set_bus_speed(struct i2c_adapter *adap, uint speed) 616 { 617 return bus_i2c_set_bus_speed(i2c_get_base(adap), speed); 618 } 619 620 /* 621 * Register mxc i2c adapters 622 */ 623 #ifdef CONFIG_SYS_I2C_MXC_I2C1 624 U_BOOT_I2C_ADAP_COMPLETE(mxc0, mxc_i2c_init, mxc_i2c_probe, 625 mxc_i2c_read, mxc_i2c_write, 626 mxc_i2c_set_bus_speed, 627 CONFIG_SYS_MXC_I2C1_SPEED, 628 CONFIG_SYS_MXC_I2C1_SLAVE, 0) 629 #endif 630 631 #ifdef CONFIG_SYS_I2C_MXC_I2C2 632 U_BOOT_I2C_ADAP_COMPLETE(mxc1, mxc_i2c_init, mxc_i2c_probe, 633 mxc_i2c_read, mxc_i2c_write, 634 mxc_i2c_set_bus_speed, 635 CONFIG_SYS_MXC_I2C2_SPEED, 636 CONFIG_SYS_MXC_I2C2_SLAVE, 1) 637 #endif 638 639 #ifdef CONFIG_SYS_I2C_MXC_I2C3 640 U_BOOT_I2C_ADAP_COMPLETE(mxc2, mxc_i2c_init, mxc_i2c_probe, 641 mxc_i2c_read, mxc_i2c_write, 642 mxc_i2c_set_bus_speed, 643 CONFIG_SYS_MXC_I2C3_SPEED, 644 CONFIG_SYS_MXC_I2C3_SLAVE, 2) 645 #endif 646 647 #ifdef CONFIG_SYS_I2C_MXC_I2C4 648 U_BOOT_I2C_ADAP_COMPLETE(mxc3, mxc_i2c_init, mxc_i2c_probe, 649 mxc_i2c_read, mxc_i2c_write, 650 mxc_i2c_set_bus_speed, 651 CONFIG_SYS_MXC_I2C4_SPEED, 652 CONFIG_SYS_MXC_I2C4_SLAVE, 3) 653 #endif 654 655 #else 656 657 static int mxc_i2c_set_bus_speed(struct udevice *bus, unsigned int speed) 658 { 659 struct mxc_i2c_bus *i2c_bus = dev_get_priv(bus); 660 661 return bus_i2c_set_bus_speed(i2c_bus, speed); 662 } 663 664 static int mxc_i2c_probe(struct udevice *bus) 665 { 666 struct mxc_i2c_bus *i2c_bus = dev_get_priv(bus); 667 fdt_addr_t addr; 668 int ret; 669 670 i2c_bus->driver_data = dev_get_driver_data(bus); 671 672 addr = dev_get_addr(bus); 673 if (addr == FDT_ADDR_T_NONE) 674 return -ENODEV; 675 676 i2c_bus->base = addr; 677 i2c_bus->index = bus->seq; 678 679 /* Enable clk */ 680 ret = enable_i2c_clk(1, bus->seq); 681 if (ret < 0) 682 return ret; 683 684 ret = i2c_idle_bus(i2c_bus); 685 if (ret < 0) { 686 /* Disable clk */ 687 enable_i2c_clk(0, bus->seq); 688 return ret; 689 } 690 691 /* 692 * Pinmux settings are in board file now, until pinmux is supported, 693 * we can set pinmux here in probe function. 694 */ 695 696 debug("i2c : controller bus %d at %lu , speed %d: ", 697 bus->seq, i2c_bus->base, 698 i2c_bus->speed); 699 700 return 0; 701 } 702 703 static int mxc_i2c_probe_chip(struct udevice *bus, u32 chip_addr, 704 u32 chip_flags) 705 { 706 int ret; 707 struct mxc_i2c_bus *i2c_bus = dev_get_priv(bus); 708 709 ret = i2c_init_transfer(i2c_bus, chip_addr, 0, 0); 710 if (ret < 0) { 711 debug("%s failed, ret = %d\n", __func__, ret); 712 return ret; 713 } 714 715 i2c_imx_stop(i2c_bus); 716 717 return 0; 718 } 719 720 static int mxc_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs) 721 { 722 struct mxc_i2c_bus *i2c_bus = dev_get_priv(bus); 723 int ret = 0; 724 ulong base = i2c_bus->base; 725 int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ? 726 VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT; 727 728 /* 729 * Here the 3rd parameter addr and the 4th one alen are set to 0, 730 * because here we only want to send out chip address. The register 731 * address is wrapped in msg. 732 */ 733 ret = i2c_init_transfer(i2c_bus, msg->addr, 0, 0); 734 if (ret < 0) { 735 debug("i2c_init_transfer error: %d\n", ret); 736 return ret; 737 } 738 739 for (; nmsgs > 0; nmsgs--, msg++) { 740 bool next_is_read = nmsgs > 1 && (msg[1].flags & I2C_M_RD); 741 debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len); 742 if (msg->flags & I2C_M_RD) 743 ret = i2c_read_data(i2c_bus, msg->addr, msg->buf, 744 msg->len); 745 else { 746 ret = i2c_write_data(i2c_bus, msg->addr, msg->buf, 747 msg->len); 748 if (ret) 749 break; 750 if (next_is_read) { 751 /* Reuse ret */ 752 ret = readb(base + (I2CR << reg_shift)); 753 ret |= I2CR_RSTA; 754 writeb(ret, base + (I2CR << reg_shift)); 755 756 ret = tx_byte(i2c_bus, (msg->addr << 1) | 1); 757 if (ret < 0) { 758 i2c_imx_stop(i2c_bus); 759 break; 760 } 761 } 762 } 763 } 764 765 if (ret) 766 debug("i2c_write: error sending\n"); 767 768 i2c_imx_stop(i2c_bus); 769 770 return ret; 771 } 772 773 static const struct dm_i2c_ops mxc_i2c_ops = { 774 .xfer = mxc_i2c_xfer, 775 .probe_chip = mxc_i2c_probe_chip, 776 .set_bus_speed = mxc_i2c_set_bus_speed, 777 }; 778 779 static const struct udevice_id mxc_i2c_ids[] = { 780 { .compatible = "fsl,imx21-i2c", }, 781 { .compatible = "fsl,vf610-i2c", .data = I2C_QUIRK_FLAG, }, 782 {} 783 }; 784 785 U_BOOT_DRIVER(i2c_mxc) = { 786 .name = "i2c_mxc", 787 .id = UCLASS_I2C, 788 .of_match = mxc_i2c_ids, 789 .probe = mxc_i2c_probe, 790 .priv_auto_alloc_size = sizeof(struct mxc_i2c_bus), 791 .ops = &mxc_i2c_ops, 792 }; 793 #endif 794