1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * i2c driver for Freescale i.MX series 4 * 5 * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> 6 * (c) 2011 Marek Vasut <marek.vasut@gmail.com> 7 * 8 * Based on i2c-imx.c from linux kernel: 9 * Copyright (C) 2005 Torsten Koschorrek <koschorrek at synertronixx.de> 10 * Copyright (C) 2005 Matthias Blaschke <blaschke at synertronixx.de> 11 * Copyright (C) 2007 RightHand Technologies, Inc. 12 * Copyright (C) 2008 Darius Augulis <darius.augulis at teltonika.lt> 13 * 14 */ 15 16 #include <common.h> 17 #include <asm/arch/clock.h> 18 #include <asm/arch/imx-regs.h> 19 #include <linux/errno.h> 20 #include <asm/mach-imx/mxc_i2c.h> 21 #include <asm/io.h> 22 #include <i2c.h> 23 #include <watchdog.h> 24 #include <dm.h> 25 #include <dm/pinctrl.h> 26 #include <fdtdec.h> 27 28 DECLARE_GLOBAL_DATA_PTR; 29 30 #define I2C_QUIRK_FLAG (1 << 0) 31 32 #define IMX_I2C_REGSHIFT 2 33 #define VF610_I2C_REGSHIFT 0 34 35 #define I2C_EARLY_INIT_INDEX 0 36 #ifdef CONFIG_SYS_I2C_IFDR_DIV 37 #define I2C_IFDR_DIV_CONSERVATIVE CONFIG_SYS_I2C_IFDR_DIV 38 #else 39 #define I2C_IFDR_DIV_CONSERVATIVE 0x7e 40 #endif 41 42 /* Register index */ 43 #define IADR 0 44 #define IFDR 1 45 #define I2CR 2 46 #define I2SR 3 47 #define I2DR 4 48 49 #define I2CR_IIEN (1 << 6) 50 #define I2CR_MSTA (1 << 5) 51 #define I2CR_MTX (1 << 4) 52 #define I2CR_TX_NO_AK (1 << 3) 53 #define I2CR_RSTA (1 << 2) 54 55 #define I2SR_ICF (1 << 7) 56 #define I2SR_IBB (1 << 5) 57 #define I2SR_IAL (1 << 4) 58 #define I2SR_IIF (1 << 1) 59 #define I2SR_RX_NO_AK (1 << 0) 60 61 #ifdef I2C_QUIRK_REG 62 #define I2CR_IEN (0 << 7) 63 #define I2CR_IDIS (1 << 7) 64 #define I2SR_IIF_CLEAR (1 << 1) 65 #else 66 #define I2CR_IEN (1 << 7) 67 #define I2CR_IDIS (0 << 7) 68 #define I2SR_IIF_CLEAR (0 << 1) 69 #endif 70 71 #ifdef I2C_QUIRK_REG 72 static u16 i2c_clk_div[60][2] = { 73 { 20, 0x00 }, { 22, 0x01 }, { 24, 0x02 }, { 26, 0x03 }, 74 { 28, 0x04 }, { 30, 0x05 }, { 32, 0x09 }, { 34, 0x06 }, 75 { 36, 0x0A }, { 40, 0x07 }, { 44, 0x0C }, { 48, 0x0D }, 76 { 52, 0x43 }, { 56, 0x0E }, { 60, 0x45 }, { 64, 0x12 }, 77 { 68, 0x0F }, { 72, 0x13 }, { 80, 0x14 }, { 88, 0x15 }, 78 { 96, 0x19 }, { 104, 0x16 }, { 112, 0x1A }, { 128, 0x17 }, 79 { 136, 0x4F }, { 144, 0x1C }, { 160, 0x1D }, { 176, 0x55 }, 80 { 192, 0x1E }, { 208, 0x56 }, { 224, 0x22 }, { 228, 0x24 }, 81 { 240, 0x1F }, { 256, 0x23 }, { 288, 0x5C }, { 320, 0x25 }, 82 { 384, 0x26 }, { 448, 0x2A }, { 480, 0x27 }, { 512, 0x2B }, 83 { 576, 0x2C }, { 640, 0x2D }, { 768, 0x31 }, { 896, 0x32 }, 84 { 960, 0x2F }, { 1024, 0x33 }, { 1152, 0x34 }, { 1280, 0x35 }, 85 { 1536, 0x36 }, { 1792, 0x3A }, { 1920, 0x37 }, { 2048, 0x3B }, 86 { 2304, 0x3C }, { 2560, 0x3D }, { 3072, 0x3E }, { 3584, 0x7A }, 87 { 3840, 0x3F }, { 4096, 0x7B }, { 5120, 0x7D }, { 6144, 0x7E }, 88 }; 89 #else 90 static u16 i2c_clk_div[50][2] = { 91 { 22, 0x20 }, { 24, 0x21 }, { 26, 0x22 }, { 28, 0x23 }, 92 { 30, 0x00 }, { 32, 0x24 }, { 36, 0x25 }, { 40, 0x26 }, 93 { 42, 0x03 }, { 44, 0x27 }, { 48, 0x28 }, { 52, 0x05 }, 94 { 56, 0x29 }, { 60, 0x06 }, { 64, 0x2A }, { 72, 0x2B }, 95 { 80, 0x2C }, { 88, 0x09 }, { 96, 0x2D }, { 104, 0x0A }, 96 { 112, 0x2E }, { 128, 0x2F }, { 144, 0x0C }, { 160, 0x30 }, 97 { 192, 0x31 }, { 224, 0x32 }, { 240, 0x0F }, { 256, 0x33 }, 98 { 288, 0x10 }, { 320, 0x34 }, { 384, 0x35 }, { 448, 0x36 }, 99 { 480, 0x13 }, { 512, 0x37 }, { 576, 0x14 }, { 640, 0x38 }, 100 { 768, 0x39 }, { 896, 0x3A }, { 960, 0x17 }, { 1024, 0x3B }, 101 { 1152, 0x18 }, { 1280, 0x3C }, { 1536, 0x3D }, { 1792, 0x3E }, 102 { 1920, 0x1B }, { 2048, 0x3F }, { 2304, 0x1C }, { 2560, 0x1D }, 103 { 3072, 0x1E }, { 3840, 0x1F } 104 }; 105 #endif 106 107 #ifndef CONFIG_SYS_MXC_I2C1_SPEED 108 #define CONFIG_SYS_MXC_I2C1_SPEED 100000 109 #endif 110 #ifndef CONFIG_SYS_MXC_I2C2_SPEED 111 #define CONFIG_SYS_MXC_I2C2_SPEED 100000 112 #endif 113 #ifndef CONFIG_SYS_MXC_I2C3_SPEED 114 #define CONFIG_SYS_MXC_I2C3_SPEED 100000 115 #endif 116 #ifndef CONFIG_SYS_MXC_I2C4_SPEED 117 #define CONFIG_SYS_MXC_I2C4_SPEED 100000 118 #endif 119 120 #ifndef CONFIG_SYS_MXC_I2C1_SLAVE 121 #define CONFIG_SYS_MXC_I2C1_SLAVE 0 122 #endif 123 #ifndef CONFIG_SYS_MXC_I2C2_SLAVE 124 #define CONFIG_SYS_MXC_I2C2_SLAVE 0 125 #endif 126 #ifndef CONFIG_SYS_MXC_I2C3_SLAVE 127 #define CONFIG_SYS_MXC_I2C3_SLAVE 0 128 #endif 129 #ifndef CONFIG_SYS_MXC_I2C4_SLAVE 130 #define CONFIG_SYS_MXC_I2C4_SLAVE 0 131 #endif 132 133 /* 134 * Calculate and set proper clock divider 135 */ 136 static uint8_t i2c_imx_get_clk(struct mxc_i2c_bus *i2c_bus, unsigned int rate) 137 { 138 unsigned int i2c_clk_rate; 139 unsigned int div; 140 u8 clk_div; 141 142 #if defined(CONFIG_MX31) 143 struct clock_control_regs *sc_regs = 144 (struct clock_control_regs *)CCM_BASE; 145 146 /* start the required I2C clock */ 147 writel(readl(&sc_regs->cgr0) | (3 << CONFIG_SYS_I2C_CLK_OFFSET), 148 &sc_regs->cgr0); 149 #endif 150 151 /* Divider value calculation */ 152 i2c_clk_rate = mxc_get_clock(MXC_I2C_CLK); 153 div = (i2c_clk_rate + rate - 1) / rate; 154 if (div < i2c_clk_div[0][0]) 155 clk_div = 0; 156 else if (div > i2c_clk_div[ARRAY_SIZE(i2c_clk_div) - 1][0]) 157 clk_div = ARRAY_SIZE(i2c_clk_div) - 1; 158 else 159 for (clk_div = 0; i2c_clk_div[clk_div][0] < div; clk_div++) 160 ; 161 162 /* Store divider value */ 163 return clk_div; 164 } 165 166 /* 167 * Set I2C Bus speed 168 */ 169 static int bus_i2c_set_bus_speed(struct mxc_i2c_bus *i2c_bus, int speed) 170 { 171 ulong base = i2c_bus->base; 172 bool quirk = i2c_bus->driver_data & I2C_QUIRK_FLAG ? true : false; 173 u8 clk_idx = i2c_imx_get_clk(i2c_bus, speed); 174 u8 idx = i2c_clk_div[clk_idx][1]; 175 int reg_shift = quirk ? VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT; 176 177 if (!base) 178 return -EINVAL; 179 180 /* Store divider value */ 181 writeb(idx, base + (IFDR << reg_shift)); 182 183 /* Reset module */ 184 writeb(I2CR_IDIS, base + (I2CR << reg_shift)); 185 writeb(0, base + (I2SR << reg_shift)); 186 return 0; 187 } 188 189 #define ST_BUS_IDLE (0 | (I2SR_IBB << 8)) 190 #define ST_BUS_BUSY (I2SR_IBB | (I2SR_IBB << 8)) 191 #define ST_IIF (I2SR_IIF | (I2SR_IIF << 8)) 192 193 static int wait_for_sr_state(struct mxc_i2c_bus *i2c_bus, unsigned state) 194 { 195 unsigned sr; 196 ulong elapsed; 197 bool quirk = i2c_bus->driver_data & I2C_QUIRK_FLAG ? true : false; 198 int reg_shift = quirk ? VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT; 199 ulong base = i2c_bus->base; 200 ulong start_time = get_timer(0); 201 for (;;) { 202 sr = readb(base + (I2SR << reg_shift)); 203 if (sr & I2SR_IAL) { 204 if (quirk) 205 writeb(sr | I2SR_IAL, base + 206 (I2SR << reg_shift)); 207 else 208 writeb(sr & ~I2SR_IAL, base + 209 (I2SR << reg_shift)); 210 printf("%s: Arbitration lost sr=%x cr=%x state=%x\n", 211 __func__, sr, readb(base + (I2CR << reg_shift)), 212 state); 213 return -ERESTART; 214 } 215 if ((sr & (state >> 8)) == (unsigned char)state) 216 return sr; 217 WATCHDOG_RESET(); 218 elapsed = get_timer(start_time); 219 if (elapsed > (CONFIG_SYS_HZ / 10)) /* .1 seconds */ 220 break; 221 } 222 printf("%s: failed sr=%x cr=%x state=%x\n", __func__, 223 sr, readb(base + (I2CR << reg_shift)), state); 224 return -ETIMEDOUT; 225 } 226 227 static int tx_byte(struct mxc_i2c_bus *i2c_bus, u8 byte) 228 { 229 int ret; 230 int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ? 231 VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT; 232 ulong base = i2c_bus->base; 233 234 writeb(I2SR_IIF_CLEAR, base + (I2SR << reg_shift)); 235 writeb(byte, base + (I2DR << reg_shift)); 236 237 ret = wait_for_sr_state(i2c_bus, ST_IIF); 238 if (ret < 0) 239 return ret; 240 if (ret & I2SR_RX_NO_AK) 241 return -EREMOTEIO; 242 return 0; 243 } 244 245 /* 246 * Stub implementations for outer i2c slave operations. 247 */ 248 void __i2c_force_reset_slave(void) 249 { 250 } 251 void i2c_force_reset_slave(void) 252 __attribute__((weak, alias("__i2c_force_reset_slave"))); 253 254 /* 255 * Stop I2C transaction 256 */ 257 static void i2c_imx_stop(struct mxc_i2c_bus *i2c_bus) 258 { 259 int ret; 260 int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ? 261 VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT; 262 ulong base = i2c_bus->base; 263 unsigned int temp = readb(base + (I2CR << reg_shift)); 264 265 temp &= ~(I2CR_MSTA | I2CR_MTX); 266 writeb(temp, base + (I2CR << reg_shift)); 267 ret = wait_for_sr_state(i2c_bus, ST_BUS_IDLE); 268 if (ret < 0) 269 printf("%s:trigger stop failed\n", __func__); 270 } 271 272 /* 273 * Send start signal, chip address and 274 * write register address 275 */ 276 static int i2c_init_transfer_(struct mxc_i2c_bus *i2c_bus, u8 chip, 277 u32 addr, int alen) 278 { 279 unsigned int temp; 280 int ret; 281 bool quirk = i2c_bus->driver_data & I2C_QUIRK_FLAG ? true : false; 282 ulong base = i2c_bus->base; 283 int reg_shift = quirk ? VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT; 284 285 /* Reset i2c slave */ 286 i2c_force_reset_slave(); 287 288 /* Enable I2C controller */ 289 if (quirk) 290 ret = readb(base + (I2CR << reg_shift)) & I2CR_IDIS; 291 else 292 ret = !(readb(base + (I2CR << reg_shift)) & I2CR_IEN); 293 294 if (ret) { 295 writeb(I2CR_IEN, base + (I2CR << reg_shift)); 296 /* Wait for controller to be stable */ 297 udelay(50); 298 } 299 300 if (readb(base + (IADR << reg_shift)) == (chip << 1)) 301 writeb((chip << 1) ^ 2, base + (IADR << reg_shift)); 302 writeb(I2SR_IIF_CLEAR, base + (I2SR << reg_shift)); 303 ret = wait_for_sr_state(i2c_bus, ST_BUS_IDLE); 304 if (ret < 0) 305 return ret; 306 307 /* Start I2C transaction */ 308 temp = readb(base + (I2CR << reg_shift)); 309 temp |= I2CR_MSTA; 310 writeb(temp, base + (I2CR << reg_shift)); 311 312 ret = wait_for_sr_state(i2c_bus, ST_BUS_BUSY); 313 if (ret < 0) 314 return ret; 315 316 temp |= I2CR_MTX | I2CR_TX_NO_AK; 317 writeb(temp, base + (I2CR << reg_shift)); 318 319 if (alen >= 0) { 320 /* write slave address */ 321 ret = tx_byte(i2c_bus, chip << 1); 322 if (ret < 0) 323 return ret; 324 325 while (alen--) { 326 ret = tx_byte(i2c_bus, (addr >> (alen * 8)) & 0xff); 327 if (ret < 0) 328 return ret; 329 } 330 } 331 332 return 0; 333 } 334 335 #ifndef CONFIG_DM_I2C 336 int i2c_idle_bus(struct mxc_i2c_bus *i2c_bus) 337 { 338 if (i2c_bus && i2c_bus->idle_bus_fn) 339 return i2c_bus->idle_bus_fn(i2c_bus->idle_bus_data); 340 return 0; 341 } 342 #else 343 /* 344 * See Linux Documentation/devicetree/bindings/i2c/i2c-imx.txt 345 * " 346 * scl-gpios: specify the gpio related to SCL pin 347 * sda-gpios: specify the gpio related to SDA pin 348 * add pinctrl to configure i2c pins to gpio function for i2c 349 * bus recovery, call it "gpio" state 350 * " 351 * 352 * The i2c_idle_bus is an implementation following Linux Kernel. 353 */ 354 int i2c_idle_bus(struct mxc_i2c_bus *i2c_bus) 355 { 356 struct udevice *bus = i2c_bus->bus; 357 struct gpio_desc *scl_gpio = &i2c_bus->scl_gpio; 358 struct gpio_desc *sda_gpio = &i2c_bus->sda_gpio; 359 int sda, scl; 360 int i, ret = 0; 361 ulong elapsed, start_time; 362 363 if (pinctrl_select_state(bus, "gpio")) { 364 dev_dbg(bus, "Can not to switch to use gpio pinmux\n"); 365 /* 366 * GPIO pinctrl for i2c force idle is not a must, 367 * but it is strongly recommended to be used. 368 * Because it can help you to recover from bad 369 * i2c bus state. Do not return failure, because 370 * it is not a must. 371 */ 372 return 0; 373 } 374 375 dm_gpio_set_dir_flags(scl_gpio, GPIOD_IS_IN); 376 dm_gpio_set_dir_flags(sda_gpio, GPIOD_IS_IN); 377 scl = dm_gpio_get_value(scl_gpio); 378 sda = dm_gpio_get_value(sda_gpio); 379 380 if ((sda & scl) == 1) 381 goto exit; /* Bus is idle already */ 382 383 /* Send high and low on the SCL line */ 384 for (i = 0; i < 9; i++) { 385 dm_gpio_set_dir_flags(scl_gpio, GPIOD_IS_OUT); 386 dm_gpio_set_value(scl_gpio, 0); 387 udelay(50); 388 dm_gpio_set_dir_flags(scl_gpio, GPIOD_IS_IN); 389 udelay(50); 390 } 391 start_time = get_timer(0); 392 for (;;) { 393 dm_gpio_set_dir_flags(scl_gpio, GPIOD_IS_IN); 394 dm_gpio_set_dir_flags(sda_gpio, GPIOD_IS_IN); 395 scl = dm_gpio_get_value(scl_gpio); 396 sda = dm_gpio_get_value(sda_gpio); 397 if ((sda & scl) == 1) 398 break; 399 WATCHDOG_RESET(); 400 elapsed = get_timer(start_time); 401 if (elapsed > (CONFIG_SYS_HZ / 5)) { /* .2 seconds */ 402 ret = -EBUSY; 403 printf("%s: failed to clear bus, sda=%d scl=%d\n", __func__, sda, scl); 404 break; 405 } 406 } 407 408 exit: 409 pinctrl_select_state(bus, "default"); 410 return ret; 411 } 412 #endif 413 414 static int i2c_init_transfer(struct mxc_i2c_bus *i2c_bus, u8 chip, 415 u32 addr, int alen) 416 { 417 int retry; 418 int ret; 419 int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ? 420 VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT; 421 422 if (!i2c_bus->base) 423 return -EINVAL; 424 425 for (retry = 0; retry < 3; retry++) { 426 ret = i2c_init_transfer_(i2c_bus, chip, addr, alen); 427 if (ret >= 0) 428 return 0; 429 i2c_imx_stop(i2c_bus); 430 if (ret == -EREMOTEIO) 431 return ret; 432 433 printf("%s: failed for chip 0x%x retry=%d\n", __func__, chip, 434 retry); 435 if (ret != -ERESTART) 436 /* Disable controller */ 437 writeb(I2CR_IDIS, i2c_bus->base + (I2CR << reg_shift)); 438 udelay(100); 439 if (i2c_idle_bus(i2c_bus) < 0) 440 break; 441 } 442 printf("%s: give up i2c_regs=0x%lx\n", __func__, i2c_bus->base); 443 return ret; 444 } 445 446 447 static int i2c_write_data(struct mxc_i2c_bus *i2c_bus, u8 chip, const u8 *buf, 448 int len) 449 { 450 int i, ret = 0; 451 452 debug("i2c_write_data: chip=0x%x, len=0x%x\n", chip, len); 453 debug("write_data: "); 454 /* use rc for counter */ 455 for (i = 0; i < len; ++i) 456 debug(" 0x%02x", buf[i]); 457 debug("\n"); 458 459 for (i = 0; i < len; i++) { 460 ret = tx_byte(i2c_bus, buf[i]); 461 if (ret < 0) { 462 debug("i2c_write_data(): rc=%d\n", ret); 463 break; 464 } 465 } 466 467 return ret; 468 } 469 470 static int i2c_read_data(struct mxc_i2c_bus *i2c_bus, uchar chip, uchar *buf, 471 int len) 472 { 473 int ret; 474 unsigned int temp; 475 int i; 476 int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ? 477 VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT; 478 ulong base = i2c_bus->base; 479 480 debug("i2c_read_data: chip=0x%x, len=0x%x\n", chip, len); 481 482 /* setup bus to read data */ 483 temp = readb(base + (I2CR << reg_shift)); 484 temp &= ~(I2CR_MTX | I2CR_TX_NO_AK); 485 if (len == 1) 486 temp |= I2CR_TX_NO_AK; 487 writeb(temp, base + (I2CR << reg_shift)); 488 writeb(I2SR_IIF_CLEAR, base + (I2SR << reg_shift)); 489 /* dummy read to clear ICF */ 490 readb(base + (I2DR << reg_shift)); 491 492 /* read data */ 493 for (i = 0; i < len; i++) { 494 ret = wait_for_sr_state(i2c_bus, ST_IIF); 495 if (ret < 0) { 496 debug("i2c_read_data(): ret=%d\n", ret); 497 i2c_imx_stop(i2c_bus); 498 return ret; 499 } 500 501 /* 502 * It must generate STOP before read I2DR to prevent 503 * controller from generating another clock cycle 504 */ 505 if (i == (len - 1)) { 506 i2c_imx_stop(i2c_bus); 507 } else if (i == (len - 2)) { 508 temp = readb(base + (I2CR << reg_shift)); 509 temp |= I2CR_TX_NO_AK; 510 writeb(temp, base + (I2CR << reg_shift)); 511 } 512 writeb(I2SR_IIF_CLEAR, base + (I2SR << reg_shift)); 513 buf[i] = readb(base + (I2DR << reg_shift)); 514 } 515 516 /* reuse ret for counter*/ 517 for (ret = 0; ret < len; ++ret) 518 debug(" 0x%02x", buf[ret]); 519 debug("\n"); 520 521 i2c_imx_stop(i2c_bus); 522 return 0; 523 } 524 525 #ifndef CONFIG_DM_I2C 526 /* 527 * Read data from I2C device 528 */ 529 static int bus_i2c_read(struct mxc_i2c_bus *i2c_bus, u8 chip, u32 addr, 530 int alen, u8 *buf, int len) 531 { 532 int ret = 0; 533 u32 temp; 534 int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ? 535 VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT; 536 ulong base = i2c_bus->base; 537 538 ret = i2c_init_transfer(i2c_bus, chip, addr, alen); 539 if (ret < 0) 540 return ret; 541 542 if (alen >= 0) { 543 temp = readb(base + (I2CR << reg_shift)); 544 temp |= I2CR_RSTA; 545 writeb(temp, base + (I2CR << reg_shift)); 546 } 547 548 ret = tx_byte(i2c_bus, (chip << 1) | 1); 549 if (ret < 0) { 550 i2c_imx_stop(i2c_bus); 551 return ret; 552 } 553 554 ret = i2c_read_data(i2c_bus, chip, buf, len); 555 556 i2c_imx_stop(i2c_bus); 557 return ret; 558 } 559 560 /* 561 * Write data to I2C device 562 */ 563 static int bus_i2c_write(struct mxc_i2c_bus *i2c_bus, u8 chip, u32 addr, 564 int alen, const u8 *buf, int len) 565 { 566 int ret = 0; 567 568 ret = i2c_init_transfer(i2c_bus, chip, addr, alen); 569 if (ret < 0) 570 return ret; 571 572 ret = i2c_write_data(i2c_bus, chip, buf, len); 573 574 i2c_imx_stop(i2c_bus); 575 576 return ret; 577 } 578 579 #if !defined(I2C2_BASE_ADDR) 580 #define I2C2_BASE_ADDR 0 581 #endif 582 583 #if !defined(I2C3_BASE_ADDR) 584 #define I2C3_BASE_ADDR 0 585 #endif 586 587 #if !defined(I2C4_BASE_ADDR) 588 #define I2C4_BASE_ADDR 0 589 #endif 590 591 #if !defined(I2C5_BASE_ADDR) 592 #define I2C5_BASE_ADDR 0 593 #endif 594 595 #if !defined(I2C6_BASE_ADDR) 596 #define I2C6_BASE_ADDR 0 597 #endif 598 599 #if !defined(I2C7_BASE_ADDR) 600 #define I2C7_BASE_ADDR 0 601 #endif 602 603 #if !defined(I2C8_BASE_ADDR) 604 #define I2C8_BASE_ADDR 0 605 #endif 606 607 static struct mxc_i2c_bus mxc_i2c_buses[] = { 608 #if defined(CONFIG_ARCH_LS1021A) || defined(CONFIG_VF610) || \ 609 defined(CONFIG_FSL_LAYERSCAPE) 610 { 0, I2C1_BASE_ADDR, I2C_QUIRK_FLAG }, 611 { 1, I2C2_BASE_ADDR, I2C_QUIRK_FLAG }, 612 { 2, I2C3_BASE_ADDR, I2C_QUIRK_FLAG }, 613 { 3, I2C4_BASE_ADDR, I2C_QUIRK_FLAG }, 614 { 4, I2C5_BASE_ADDR, I2C_QUIRK_FLAG }, 615 { 5, I2C6_BASE_ADDR, I2C_QUIRK_FLAG }, 616 { 6, I2C7_BASE_ADDR, I2C_QUIRK_FLAG }, 617 { 7, I2C8_BASE_ADDR, I2C_QUIRK_FLAG }, 618 #else 619 { 0, I2C1_BASE_ADDR, 0 }, 620 { 1, I2C2_BASE_ADDR, 0 }, 621 { 2, I2C3_BASE_ADDR, 0 }, 622 { 3, I2C4_BASE_ADDR, 0 }, 623 { 4, I2C5_BASE_ADDR, 0 }, 624 { 5, I2C6_BASE_ADDR, 0 }, 625 { 6, I2C7_BASE_ADDR, 0 }, 626 { 7, I2C8_BASE_ADDR, 0 }, 627 #endif 628 }; 629 630 struct mxc_i2c_bus *i2c_get_base(struct i2c_adapter *adap) 631 { 632 return &mxc_i2c_buses[adap->hwadapnr]; 633 } 634 635 static int mxc_i2c_read(struct i2c_adapter *adap, uint8_t chip, 636 uint addr, int alen, uint8_t *buffer, 637 int len) 638 { 639 return bus_i2c_read(i2c_get_base(adap), chip, addr, alen, buffer, len); 640 } 641 642 static int mxc_i2c_write(struct i2c_adapter *adap, uint8_t chip, 643 uint addr, int alen, uint8_t *buffer, 644 int len) 645 { 646 return bus_i2c_write(i2c_get_base(adap), chip, addr, alen, buffer, len); 647 } 648 649 /* 650 * Test if a chip at a given address responds (probe the chip) 651 */ 652 static int mxc_i2c_probe(struct i2c_adapter *adap, uint8_t chip) 653 { 654 return bus_i2c_write(i2c_get_base(adap), chip, 0, 0, NULL, 0); 655 } 656 657 int __enable_i2c_clk(unsigned char enable, unsigned i2c_num) 658 { 659 return 1; 660 } 661 int enable_i2c_clk(unsigned char enable, unsigned i2c_num) 662 __attribute__((weak, alias("__enable_i2c_clk"))); 663 664 void bus_i2c_init(int index, int speed, int unused, 665 int (*idle_bus_fn)(void *p), void *idle_bus_data) 666 { 667 int ret; 668 669 if (index >= ARRAY_SIZE(mxc_i2c_buses)) { 670 debug("Error i2c index\n"); 671 return; 672 } 673 674 /* 675 * Warning: Be careful to allow the assignment to a static 676 * variable here. This function could be called while U-Boot is 677 * still running in flash memory. So such assignment is equal 678 * to write data to flash without erasing. 679 */ 680 if (idle_bus_fn) 681 mxc_i2c_buses[index].idle_bus_fn = idle_bus_fn; 682 if (idle_bus_data) 683 mxc_i2c_buses[index].idle_bus_data = idle_bus_data; 684 685 ret = enable_i2c_clk(1, index); 686 if (ret < 0) { 687 debug("I2C-%d clk fail to enable.\n", index); 688 return; 689 } 690 691 bus_i2c_set_bus_speed(&mxc_i2c_buses[index], speed); 692 } 693 694 /* 695 * Early init I2C for prepare read the clk through I2C. 696 */ 697 void i2c_early_init_f(void) 698 { 699 ulong base = mxc_i2c_buses[I2C_EARLY_INIT_INDEX].base; 700 bool quirk = mxc_i2c_buses[I2C_EARLY_INIT_INDEX].driver_data 701 & I2C_QUIRK_FLAG ? true : false; 702 int reg_shift = quirk ? VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT; 703 704 /* Set I2C divider value */ 705 writeb(I2C_IFDR_DIV_CONSERVATIVE, base + (IFDR << reg_shift)); 706 /* Reset module */ 707 writeb(I2CR_IDIS, base + (I2CR << reg_shift)); 708 writeb(0, base + (I2SR << reg_shift)); 709 /* Enable I2C */ 710 writeb(I2CR_IEN, base + (I2CR << reg_shift)); 711 } 712 713 /* 714 * Init I2C Bus 715 */ 716 static void mxc_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr) 717 { 718 bus_i2c_init(adap->hwadapnr, speed, slaveaddr, NULL, NULL); 719 } 720 721 /* 722 * Set I2C Speed 723 */ 724 static u32 mxc_i2c_set_bus_speed(struct i2c_adapter *adap, uint speed) 725 { 726 return bus_i2c_set_bus_speed(i2c_get_base(adap), speed); 727 } 728 729 /* 730 * Register mxc i2c adapters 731 */ 732 #ifdef CONFIG_SYS_I2C_MXC_I2C1 733 U_BOOT_I2C_ADAP_COMPLETE(mxc0, mxc_i2c_init, mxc_i2c_probe, 734 mxc_i2c_read, mxc_i2c_write, 735 mxc_i2c_set_bus_speed, 736 CONFIG_SYS_MXC_I2C1_SPEED, 737 CONFIG_SYS_MXC_I2C1_SLAVE, 0) 738 #endif 739 740 #ifdef CONFIG_SYS_I2C_MXC_I2C2 741 U_BOOT_I2C_ADAP_COMPLETE(mxc1, mxc_i2c_init, mxc_i2c_probe, 742 mxc_i2c_read, mxc_i2c_write, 743 mxc_i2c_set_bus_speed, 744 CONFIG_SYS_MXC_I2C2_SPEED, 745 CONFIG_SYS_MXC_I2C2_SLAVE, 1) 746 #endif 747 748 #ifdef CONFIG_SYS_I2C_MXC_I2C3 749 U_BOOT_I2C_ADAP_COMPLETE(mxc2, mxc_i2c_init, mxc_i2c_probe, 750 mxc_i2c_read, mxc_i2c_write, 751 mxc_i2c_set_bus_speed, 752 CONFIG_SYS_MXC_I2C3_SPEED, 753 CONFIG_SYS_MXC_I2C3_SLAVE, 2) 754 #endif 755 756 #ifdef CONFIG_SYS_I2C_MXC_I2C4 757 U_BOOT_I2C_ADAP_COMPLETE(mxc3, mxc_i2c_init, mxc_i2c_probe, 758 mxc_i2c_read, mxc_i2c_write, 759 mxc_i2c_set_bus_speed, 760 CONFIG_SYS_MXC_I2C4_SPEED, 761 CONFIG_SYS_MXC_I2C4_SLAVE, 3) 762 #endif 763 764 #ifdef CONFIG_SYS_I2C_MXC_I2C5 765 U_BOOT_I2C_ADAP_COMPLETE(mxc4, mxc_i2c_init, mxc_i2c_probe, 766 mxc_i2c_read, mxc_i2c_write, 767 mxc_i2c_set_bus_speed, 768 CONFIG_SYS_MXC_I2C5_SPEED, 769 CONFIG_SYS_MXC_I2C5_SLAVE, 4) 770 #endif 771 772 #ifdef CONFIG_SYS_I2C_MXC_I2C6 773 U_BOOT_I2C_ADAP_COMPLETE(mxc5, mxc_i2c_init, mxc_i2c_probe, 774 mxc_i2c_read, mxc_i2c_write, 775 mxc_i2c_set_bus_speed, 776 CONFIG_SYS_MXC_I2C6_SPEED, 777 CONFIG_SYS_MXC_I2C6_SLAVE, 5) 778 #endif 779 780 #ifdef CONFIG_SYS_I2C_MXC_I2C7 781 U_BOOT_I2C_ADAP_COMPLETE(mxc6, mxc_i2c_init, mxc_i2c_probe, 782 mxc_i2c_read, mxc_i2c_write, 783 mxc_i2c_set_bus_speed, 784 CONFIG_SYS_MXC_I2C7_SPEED, 785 CONFIG_SYS_MXC_I2C7_SLAVE, 6) 786 #endif 787 788 #ifdef CONFIG_SYS_I2C_MXC_I2C8 789 U_BOOT_I2C_ADAP_COMPLETE(mxc7, mxc_i2c_init, mxc_i2c_probe, 790 mxc_i2c_read, mxc_i2c_write, 791 mxc_i2c_set_bus_speed, 792 CONFIG_SYS_MXC_I2C8_SPEED, 793 CONFIG_SYS_MXC_I2C8_SLAVE, 7) 794 #endif 795 796 #else 797 798 static int mxc_i2c_set_bus_speed(struct udevice *bus, unsigned int speed) 799 { 800 struct mxc_i2c_bus *i2c_bus = dev_get_priv(bus); 801 802 return bus_i2c_set_bus_speed(i2c_bus, speed); 803 } 804 805 static int mxc_i2c_probe(struct udevice *bus) 806 { 807 struct mxc_i2c_bus *i2c_bus = dev_get_priv(bus); 808 const void *fdt = gd->fdt_blob; 809 int node = dev_of_offset(bus); 810 fdt_addr_t addr; 811 int ret, ret2; 812 813 i2c_bus->driver_data = dev_get_driver_data(bus); 814 815 addr = devfdt_get_addr(bus); 816 if (addr == FDT_ADDR_T_NONE) 817 return -EINVAL; 818 819 i2c_bus->base = addr; 820 i2c_bus->index = bus->seq; 821 i2c_bus->bus = bus; 822 823 /* Enable clk */ 824 ret = enable_i2c_clk(1, bus->seq); 825 if (ret < 0) 826 return ret; 827 828 /* 829 * See Documentation/devicetree/bindings/i2c/i2c-imx.txt 830 * Use gpio to force bus idle when necessary. 831 */ 832 ret = fdt_stringlist_search(fdt, node, "pinctrl-names", "gpio"); 833 if (ret < 0) { 834 debug("i2c bus %d at 0x%2lx, no gpio pinctrl state.\n", bus->seq, i2c_bus->base); 835 } else { 836 ret = gpio_request_by_name_nodev(offset_to_ofnode(node), 837 "scl-gpios", 0, &i2c_bus->scl_gpio, 838 GPIOD_IS_OUT); 839 ret2 = gpio_request_by_name_nodev(offset_to_ofnode(node), 840 "sda-gpios", 0, &i2c_bus->sda_gpio, 841 GPIOD_IS_OUT); 842 if (!dm_gpio_is_valid(&i2c_bus->sda_gpio) || 843 !dm_gpio_is_valid(&i2c_bus->scl_gpio) || 844 ret || ret2) { 845 dev_err(dev, "i2c bus %d at %lu, fail to request scl/sda gpio\n", bus->seq, i2c_bus->base); 846 return -EINVAL; 847 } 848 } 849 850 ret = i2c_idle_bus(i2c_bus); 851 if (ret < 0) { 852 /* Disable clk */ 853 enable_i2c_clk(0, bus->seq); 854 return ret; 855 } 856 857 /* 858 * Pinmux settings are in board file now, until pinmux is supported, 859 * we can set pinmux here in probe function. 860 */ 861 862 debug("i2c : controller bus %d at %lu , speed %d: ", 863 bus->seq, i2c_bus->base, 864 i2c_bus->speed); 865 866 return 0; 867 } 868 869 static int mxc_i2c_probe_chip(struct udevice *bus, u32 chip_addr, 870 u32 chip_flags) 871 { 872 int ret; 873 struct mxc_i2c_bus *i2c_bus = dev_get_priv(bus); 874 875 ret = i2c_init_transfer(i2c_bus, chip_addr, 0, 0); 876 if (ret < 0) { 877 debug("%s failed, ret = %d\n", __func__, ret); 878 return ret; 879 } 880 881 i2c_imx_stop(i2c_bus); 882 883 return 0; 884 } 885 886 static int mxc_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs) 887 { 888 struct mxc_i2c_bus *i2c_bus = dev_get_priv(bus); 889 int ret = 0; 890 ulong base = i2c_bus->base; 891 int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ? 892 VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT; 893 894 /* 895 * Here the 3rd parameter addr and the 4th one alen are set to 0, 896 * because here we only want to send out chip address. The register 897 * address is wrapped in msg. 898 */ 899 ret = i2c_init_transfer(i2c_bus, msg->addr, 0, 0); 900 if (ret < 0) { 901 debug("i2c_init_transfer error: %d\n", ret); 902 return ret; 903 } 904 905 for (; nmsgs > 0; nmsgs--, msg++) { 906 bool next_is_read = nmsgs > 1 && (msg[1].flags & I2C_M_RD); 907 debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len); 908 if (msg->flags & I2C_M_RD) 909 ret = i2c_read_data(i2c_bus, msg->addr, msg->buf, 910 msg->len); 911 else { 912 ret = i2c_write_data(i2c_bus, msg->addr, msg->buf, 913 msg->len); 914 if (ret) 915 break; 916 if (next_is_read) { 917 /* Reuse ret */ 918 ret = readb(base + (I2CR << reg_shift)); 919 ret |= I2CR_RSTA; 920 writeb(ret, base + (I2CR << reg_shift)); 921 922 ret = tx_byte(i2c_bus, (msg->addr << 1) | 1); 923 if (ret < 0) { 924 i2c_imx_stop(i2c_bus); 925 break; 926 } 927 } 928 } 929 } 930 931 if (ret) 932 debug("i2c_write: error sending\n"); 933 934 i2c_imx_stop(i2c_bus); 935 936 return ret; 937 } 938 939 static const struct dm_i2c_ops mxc_i2c_ops = { 940 .xfer = mxc_i2c_xfer, 941 .probe_chip = mxc_i2c_probe_chip, 942 .set_bus_speed = mxc_i2c_set_bus_speed, 943 }; 944 945 static const struct udevice_id mxc_i2c_ids[] = { 946 { .compatible = "fsl,imx21-i2c", }, 947 { .compatible = "fsl,vf610-i2c", .data = I2C_QUIRK_FLAG, }, 948 {} 949 }; 950 951 U_BOOT_DRIVER(i2c_mxc) = { 952 .name = "i2c_mxc", 953 .id = UCLASS_I2C, 954 .of_match = mxc_i2c_ids, 955 .probe = mxc_i2c_probe, 956 .priv_auto_alloc_size = sizeof(struct mxc_i2c_bus), 957 .ops = &mxc_i2c_ops, 958 }; 959 #endif 960