xref: /openbmc/u-boot/drivers/i2c/i2c-uniphier.c (revision 85231c08)
1 /*
2  * Copyright (C) 2014      Panasonic Corporation
3  * Copyright (C) 2015-2016 Socionext Inc.
4  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #include <linux/delay.h>
10 #include <linux/errno.h>
11 #include <linux/io.h>
12 #include <linux/sizes.h>
13 #include <linux/types.h>
14 #include <dm.h>
15 #include <fdtdec.h>
16 #include <i2c.h>
17 
18 struct uniphier_i2c_regs {
19 	u32 dtrm;			/* data transmission */
20 #define I2C_DTRM_STA	(1 << 10)
21 #define I2C_DTRM_STO	(1 << 9)
22 #define I2C_DTRM_NACK	(1 << 8)
23 #define I2C_DTRM_RD	(1 << 0)
24 	u32 drec;			/* data reception */
25 #define I2C_DREC_STS	(1 << 12)
26 #define I2C_DREC_LRB	(1 << 11)
27 #define I2C_DREC_LAB	(1 << 9)
28 	u32 myad;			/* slave address */
29 	u32 clk;			/* clock frequency control */
30 	u32 brst;			/* bus reset */
31 #define I2C_BRST_FOEN	(1 << 1)
32 #define I2C_BRST_BRST	(1 << 0)
33 	u32 hold;			/* hold time control */
34 	u32 bsts;			/* bus status monitor */
35 	u32 noise;			/* noise filter control */
36 	u32 setup;			/* setup time control */
37 };
38 
39 #define IOBUS_FREQ	100000000
40 
41 struct uniphier_i2c_priv {
42 	struct udevice *dev;
43 	struct uniphier_i2c_regs __iomem *regs;	/* register base */
44 	unsigned long input_clk;	/* master clock (Hz) */
45 	unsigned long wait_us;		/* wait for every byte transfer (us) */
46 };
47 
48 static int uniphier_i2c_probe(struct udevice *dev)
49 {
50 	fdt_addr_t addr;
51 	struct uniphier_i2c_priv *priv = dev_get_priv(dev);
52 
53 	addr = devfdt_get_addr(dev);
54 	if (addr == FDT_ADDR_T_NONE)
55 		return -EINVAL;
56 
57 	priv->regs = devm_ioremap(dev, addr, SZ_64);
58 	if (!priv->regs)
59 		return -ENOMEM;
60 
61 	priv->input_clk = IOBUS_FREQ;
62 
63 	priv->dev = dev;
64 
65 	/* deassert reset */
66 	writel(0x3, &priv->regs->brst);
67 
68 	return 0;
69 }
70 
71 static int send_and_recv_byte(struct uniphier_i2c_priv *priv, u32 dtrm)
72 {
73 	writel(dtrm, &priv->regs->dtrm);
74 
75 	/*
76 	 * This controller only provides interruption to inform the completion
77 	 * of each byte transfer.  (No status register to poll it.)
78 	 * Unfortunately, U-Boot does not have a good support of interrupt.
79 	 * Wait for a while.
80 	 */
81 	udelay(priv->wait_us);
82 
83 	return readl(&priv->regs->drec);
84 }
85 
86 static int send_byte(struct uniphier_i2c_priv *priv, u32 dtrm, bool *stop)
87 {
88 	int ret = 0;
89 	u32 drec;
90 
91 	drec = send_and_recv_byte(priv, dtrm);
92 
93 	if (drec & I2C_DREC_LAB) {
94 		dev_dbg(priv->dev, "uniphier_i2c: bus arbitration failed\n");
95 		*stop = false;
96 		ret = -EREMOTEIO;
97 	}
98 	if (drec & I2C_DREC_LRB) {
99 		dev_dbg(priv->dev, "uniphier_i2c: slave did not return ACK\n");
100 		ret = -EREMOTEIO;
101 	}
102 	return ret;
103 }
104 
105 static int uniphier_i2c_transmit(struct uniphier_i2c_priv *priv, uint addr,
106 				 uint len, const u8 *buf, bool *stop)
107 {
108 	int ret;
109 
110 	dev_dbg(priv->dev, "%s: addr = %x, len = %d\n", __func__, addr, len);
111 
112 	ret = send_byte(priv, I2C_DTRM_STA | I2C_DTRM_NACK | addr << 1, stop);
113 	if (ret < 0)
114 		goto fail;
115 
116 	while (len--) {
117 		ret = send_byte(priv, I2C_DTRM_NACK | *buf++, stop);
118 		if (ret < 0)
119 			goto fail;
120 	}
121 
122 fail:
123 	if (*stop)
124 		writel(I2C_DTRM_STO | I2C_DTRM_NACK, &priv->regs->dtrm);
125 
126 	return ret;
127 }
128 
129 static int uniphier_i2c_receive(struct uniphier_i2c_priv *priv, uint addr,
130 				uint len, u8 *buf, bool *stop)
131 {
132 	int ret;
133 
134 	dev_dbg(priv->dev, "%s: addr = %x, len = %d\n", __func__, addr, len);
135 
136 	ret = send_byte(priv, I2C_DTRM_STA | I2C_DTRM_NACK |
137 			I2C_DTRM_RD | addr << 1, stop);
138 	if (ret < 0)
139 		goto fail;
140 
141 	while (len--)
142 		*buf++ = send_and_recv_byte(priv, len ? 0 : I2C_DTRM_NACK);
143 
144 fail:
145 	if (*stop)
146 		writel(I2C_DTRM_STO | I2C_DTRM_NACK, &priv->regs->dtrm);
147 
148 	return ret;
149 }
150 
151 static int uniphier_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
152 			     int nmsgs)
153 {
154 	int ret = 0;
155 	struct uniphier_i2c_priv *priv = dev_get_priv(bus);
156 	bool stop;
157 
158 	for (; nmsgs > 0; nmsgs--, msg++) {
159 		/* If next message is read, skip the stop condition */
160 		stop = nmsgs > 1 && msg[1].flags & I2C_M_RD ? false : true;
161 
162 		if (msg->flags & I2C_M_RD)
163 			ret = uniphier_i2c_receive(priv, msg->addr, msg->len,
164 						   msg->buf, &stop);
165 		else
166 			ret = uniphier_i2c_transmit(priv, msg->addr, msg->len,
167 						    msg->buf, &stop);
168 
169 		if (ret < 0)
170 			break;
171 	}
172 
173 	return ret;
174 }
175 
176 static int uniphier_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
177 {
178 	struct uniphier_i2c_priv *priv = dev_get_priv(bus);
179 
180 	/* max supported frequency is 400 kHz */
181 	if (speed > 400000)
182 		return -EINVAL;
183 
184 	/* bus reset: make sure the bus is idle when change the frequency */
185 	writel(0x1, &priv->regs->brst);
186 
187 	writel((priv->input_clk / speed / 2 << 16) | (priv->input_clk / speed),
188 	       &priv->regs->clk);
189 
190 	writel(0x3, &priv->regs->brst);
191 
192 	/*
193 	 * Theoretically, each byte can be transferred in
194 	 * 1000000 * 9 / speed usec.  For safety, wait more than double.
195 	 */
196 	priv->wait_us = 20000000 / speed;
197 
198 	return 0;
199 }
200 
201 
202 static const struct dm_i2c_ops uniphier_i2c_ops = {
203 	.xfer = uniphier_i2c_xfer,
204 	.set_bus_speed = uniphier_i2c_set_bus_speed,
205 };
206 
207 static const struct udevice_id uniphier_i2c_of_match[] = {
208 	{ .compatible = "socionext,uniphier-i2c" },
209 	{ /* sentinel */ }
210 };
211 
212 U_BOOT_DRIVER(uniphier_i2c) = {
213 	.name = "uniphier-i2c",
214 	.id = UCLASS_I2C,
215 	.of_match = uniphier_i2c_of_match,
216 	.probe = uniphier_i2c_probe,
217 	.priv_auto_alloc_size = sizeof(struct uniphier_i2c_priv),
218 	.ops = &uniphier_i2c_ops,
219 };
220