xref: /openbmc/u-boot/drivers/i2c/i2c-uniphier.c (revision 63e22517)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2014      Panasonic Corporation
4  * Copyright (C) 2015-2016 Socionext Inc.
5  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
6  */
7 
8 #include <linux/delay.h>
9 #include <linux/errno.h>
10 #include <linux/io.h>
11 #include <linux/sizes.h>
12 #include <linux/types.h>
13 #include <dm.h>
14 #include <fdtdec.h>
15 #include <i2c.h>
16 
17 struct uniphier_i2c_regs {
18 	u32 dtrm;			/* data transmission */
19 #define I2C_DTRM_STA	(1 << 10)
20 #define I2C_DTRM_STO	(1 << 9)
21 #define I2C_DTRM_NACK	(1 << 8)
22 #define I2C_DTRM_RD	(1 << 0)
23 	u32 drec;			/* data reception */
24 #define I2C_DREC_STS	(1 << 12)
25 #define I2C_DREC_LRB	(1 << 11)
26 #define I2C_DREC_LAB	(1 << 9)
27 	u32 myad;			/* slave address */
28 	u32 clk;			/* clock frequency control */
29 	u32 brst;			/* bus reset */
30 #define I2C_BRST_FOEN	(1 << 1)
31 #define I2C_BRST_BRST	(1 << 0)
32 	u32 hold;			/* hold time control */
33 	u32 bsts;			/* bus status monitor */
34 	u32 noise;			/* noise filter control */
35 	u32 setup;			/* setup time control */
36 };
37 
38 #define IOBUS_FREQ	100000000
39 
40 struct uniphier_i2c_priv {
41 	struct udevice *dev;
42 	struct uniphier_i2c_regs __iomem *regs;	/* register base */
43 	unsigned long input_clk;	/* master clock (Hz) */
44 	unsigned long wait_us;		/* wait for every byte transfer (us) */
45 };
46 
47 static int uniphier_i2c_probe(struct udevice *dev)
48 {
49 	fdt_addr_t addr;
50 	struct uniphier_i2c_priv *priv = dev_get_priv(dev);
51 
52 	addr = devfdt_get_addr(dev);
53 	if (addr == FDT_ADDR_T_NONE)
54 		return -EINVAL;
55 
56 	priv->regs = devm_ioremap(dev, addr, SZ_64);
57 	if (!priv->regs)
58 		return -ENOMEM;
59 
60 	priv->input_clk = IOBUS_FREQ;
61 
62 	priv->dev = dev;
63 
64 	/* deassert reset */
65 	writel(0x3, &priv->regs->brst);
66 
67 	return 0;
68 }
69 
70 static int send_and_recv_byte(struct uniphier_i2c_priv *priv, u32 dtrm)
71 {
72 	writel(dtrm, &priv->regs->dtrm);
73 
74 	/*
75 	 * This controller only provides interruption to inform the completion
76 	 * of each byte transfer.  (No status register to poll it.)
77 	 * Unfortunately, U-Boot does not have a good support of interrupt.
78 	 * Wait for a while.
79 	 */
80 	udelay(priv->wait_us);
81 
82 	return readl(&priv->regs->drec);
83 }
84 
85 static int send_byte(struct uniphier_i2c_priv *priv, u32 dtrm, bool *stop)
86 {
87 	int ret = 0;
88 	u32 drec;
89 
90 	drec = send_and_recv_byte(priv, dtrm);
91 
92 	if (drec & I2C_DREC_LAB) {
93 		dev_dbg(priv->dev, "uniphier_i2c: bus arbitration failed\n");
94 		*stop = false;
95 		ret = -EREMOTEIO;
96 	}
97 	if (drec & I2C_DREC_LRB) {
98 		dev_dbg(priv->dev, "uniphier_i2c: slave did not return ACK\n");
99 		ret = -EREMOTEIO;
100 	}
101 	return ret;
102 }
103 
104 static int uniphier_i2c_transmit(struct uniphier_i2c_priv *priv, uint addr,
105 				 uint len, const u8 *buf, bool *stop)
106 {
107 	int ret;
108 
109 	dev_dbg(priv->dev, "%s: addr = %x, len = %d\n", __func__, addr, len);
110 
111 	ret = send_byte(priv, I2C_DTRM_STA | I2C_DTRM_NACK | addr << 1, stop);
112 	if (ret < 0)
113 		goto fail;
114 
115 	while (len--) {
116 		ret = send_byte(priv, I2C_DTRM_NACK | *buf++, stop);
117 		if (ret < 0)
118 			goto fail;
119 	}
120 
121 fail:
122 	if (*stop)
123 		writel(I2C_DTRM_STO | I2C_DTRM_NACK, &priv->regs->dtrm);
124 
125 	return ret;
126 }
127 
128 static int uniphier_i2c_receive(struct uniphier_i2c_priv *priv, uint addr,
129 				uint len, u8 *buf, bool *stop)
130 {
131 	int ret;
132 
133 	dev_dbg(priv->dev, "%s: addr = %x, len = %d\n", __func__, addr, len);
134 
135 	ret = send_byte(priv, I2C_DTRM_STA | I2C_DTRM_NACK |
136 			I2C_DTRM_RD | addr << 1, stop);
137 	if (ret < 0)
138 		goto fail;
139 
140 	while (len--)
141 		*buf++ = send_and_recv_byte(priv, len ? 0 : I2C_DTRM_NACK);
142 
143 fail:
144 	if (*stop)
145 		writel(I2C_DTRM_STO | I2C_DTRM_NACK, &priv->regs->dtrm);
146 
147 	return ret;
148 }
149 
150 static int uniphier_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
151 			     int nmsgs)
152 {
153 	int ret = 0;
154 	struct uniphier_i2c_priv *priv = dev_get_priv(bus);
155 	bool stop;
156 
157 	for (; nmsgs > 0; nmsgs--, msg++) {
158 		/* If next message is read, skip the stop condition */
159 		stop = nmsgs > 1 && msg[1].flags & I2C_M_RD ? false : true;
160 
161 		if (msg->flags & I2C_M_RD)
162 			ret = uniphier_i2c_receive(priv, msg->addr, msg->len,
163 						   msg->buf, &stop);
164 		else
165 			ret = uniphier_i2c_transmit(priv, msg->addr, msg->len,
166 						    msg->buf, &stop);
167 
168 		if (ret < 0)
169 			break;
170 	}
171 
172 	return ret;
173 }
174 
175 static int uniphier_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
176 {
177 	struct uniphier_i2c_priv *priv = dev_get_priv(bus);
178 
179 	/* max supported frequency is 400 kHz */
180 	if (speed > 400000)
181 		return -EINVAL;
182 
183 	/* bus reset: make sure the bus is idle when change the frequency */
184 	writel(0x1, &priv->regs->brst);
185 
186 	writel((priv->input_clk / speed / 2 << 16) | (priv->input_clk / speed),
187 	       &priv->regs->clk);
188 
189 	writel(0x3, &priv->regs->brst);
190 
191 	/*
192 	 * Theoretically, each byte can be transferred in
193 	 * 1000000 * 9 / speed usec.  For safety, wait more than double.
194 	 */
195 	priv->wait_us = 20000000 / speed;
196 
197 	return 0;
198 }
199 
200 
201 static const struct dm_i2c_ops uniphier_i2c_ops = {
202 	.xfer = uniphier_i2c_xfer,
203 	.set_bus_speed = uniphier_i2c_set_bus_speed,
204 };
205 
206 static const struct udevice_id uniphier_i2c_of_match[] = {
207 	{ .compatible = "socionext,uniphier-i2c" },
208 	{ /* sentinel */ }
209 };
210 
211 U_BOOT_DRIVER(uniphier_i2c) = {
212 	.name = "uniphier-i2c",
213 	.id = UCLASS_I2C,
214 	.of_match = uniphier_i2c_of_match,
215 	.probe = uniphier_i2c_probe,
216 	.priv_auto_alloc_size = sizeof(struct uniphier_i2c_priv),
217 	.ops = &uniphier_i2c_ops,
218 };
219