xref: /openbmc/u-boot/drivers/i2c/davinci_i2c.c (revision 7c2eabab)
1 /*
2  * TI DaVinci (TMS320DM644x) I2C driver.
3  *
4  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
5  *
6  * --------------------------------------------------------
7  *
8  * See file CREDITS for list of people who contributed to this
9  * project.
10  *
11  * This program is free software; you can redistribute it and/or
12  * modify it under the terms of the GNU General Public License as
13  * published by the Free Software Foundation; either version 2 of
14  * the License, or (at your option) any later version.
15  *
16  * This program is distributed in the hope that it will be useful,
17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19  * GNU General Public License for more details.
20  *
21  * You should have received a copy of the GNU General Public License
22  * along with this program; if not, write to the Free Software
23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24  * MA 02111-1307 USA
25  */
26 
27 #include <common.h>
28 #include <i2c.h>
29 #include <asm/arch/hardware.h>
30 #include <asm/arch/i2c_defs.h>
31 
32 #define CHECK_NACK() \
33 	do {\
34 		if (tmp & (I2C_TIMEOUT | I2C_STAT_NACK)) {\
35 			REG(I2C_CON) = 0;\
36 			return(1);\
37 		}\
38 	} while (0)
39 
40 
41 static int wait_for_bus(void)
42 {
43 	int	stat, timeout;
44 
45 	REG(I2C_STAT) = 0xffff;
46 
47 	for (timeout = 0; timeout < 10; timeout++) {
48 		if (!((stat = REG(I2C_STAT)) & I2C_STAT_BB)) {
49 			REG(I2C_STAT) = 0xffff;
50 			return(0);
51 		}
52 
53 		REG(I2C_STAT) = stat;
54 		udelay(50000);
55 	}
56 
57 	REG(I2C_STAT) = 0xffff;
58 	return(1);
59 }
60 
61 
62 static int poll_i2c_irq(int mask)
63 {
64 	int	stat, timeout;
65 
66 	for (timeout = 0; timeout < 10; timeout++) {
67 		udelay(1000);
68 		stat = REG(I2C_STAT);
69 		if (stat & mask) {
70 			return(stat);
71 		}
72 	}
73 
74 	REG(I2C_STAT) = 0xffff;
75 	return(stat | I2C_TIMEOUT);
76 }
77 
78 
79 void flush_rx(void)
80 {
81 	int	dummy;
82 
83 	while (1) {
84 		if (!(REG(I2C_STAT) & I2C_STAT_RRDY))
85 			break;
86 
87 		dummy = REG(I2C_DRR);
88 		REG(I2C_STAT) = I2C_STAT_RRDY;
89 		udelay(1000);
90 	}
91 }
92 
93 
94 void i2c_init(int speed, int slaveadd)
95 {
96 	u_int32_t	div, psc;
97 
98 	if (REG(I2C_CON) & I2C_CON_EN) {
99 		REG(I2C_CON) = 0;
100 		udelay (50000);
101 	}
102 
103 	psc = 2;
104 	div = (CONFIG_SYS_HZ_CLOCK / ((psc + 1) * speed)) - 10;	/* SCLL + SCLH */
105 	REG(I2C_PSC) = psc;			/* 27MHz / (2 + 1) = 9MHz */
106 	REG(I2C_SCLL) = (div * 50) / 100;	/* 50% Duty */
107 	REG(I2C_SCLH) = div - REG(I2C_SCLL);
108 
109 	REG(I2C_OA) = slaveadd;
110 	REG(I2C_CNT) = 0;
111 
112 	/* Interrupts must be enabled or I2C module won't work */
113 	REG(I2C_IE) = I2C_IE_SCD_IE | I2C_IE_XRDY_IE |
114 		I2C_IE_RRDY_IE | I2C_IE_ARDY_IE | I2C_IE_NACK_IE;
115 
116 	/* Now enable I2C controller (get it out of reset) */
117 	REG(I2C_CON) = I2C_CON_EN;
118 
119 	udelay(1000);
120 }
121 
122 int i2c_set_bus_speed(unsigned int speed)
123 {
124 	i2c_init(speed, CONFIG_SYS_I2C_SLAVE);
125 	return 0;
126 }
127 
128 int i2c_probe(u_int8_t chip)
129 {
130 	int	rc = 1;
131 
132 	if (chip == REG(I2C_OA)) {
133 		return(rc);
134 	}
135 
136 	REG(I2C_CON) = 0;
137 	if (wait_for_bus()) {return(1);}
138 
139 	/* try to read one byte from current (or only) address */
140 	REG(I2C_CNT) = 1;
141 	REG(I2C_SA) = chip;
142 	REG(I2C_CON) = (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP);
143 	udelay (50000);
144 
145 	if (!(REG(I2C_STAT) & I2C_STAT_NACK)) {
146 		rc = 0;
147 		flush_rx();
148 		REG(I2C_STAT) = 0xffff;
149 	} else {
150 		REG(I2C_STAT) = 0xffff;
151 		REG(I2C_CON) |= I2C_CON_STP;
152 		udelay(20000);
153 		if (wait_for_bus()) {return(1);}
154 	}
155 
156 	flush_rx();
157 	REG(I2C_STAT) = 0xffff;
158 	REG(I2C_CNT) = 0;
159 	return(rc);
160 }
161 
162 
163 int i2c_read(u_int8_t chip, u_int32_t addr, int alen, u_int8_t *buf, int len)
164 {
165 	u_int32_t	tmp;
166 	int		i;
167 
168 	if ((alen < 0) || (alen > 2)) {
169 		printf("%s(): bogus address length %x\n", __FUNCTION__, alen);
170 		return(1);
171 	}
172 
173 	if (wait_for_bus()) {return(1);}
174 
175 	if (alen != 0) {
176 		/* Start address phase */
177 		tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX;
178 		REG(I2C_CNT) = alen;
179 		REG(I2C_SA) = chip;
180 		REG(I2C_CON) = tmp;
181 
182 		tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
183 
184 		CHECK_NACK();
185 
186 		switch (alen) {
187 			case 2:
188 				/* Send address MSByte */
189 				if (tmp & I2C_STAT_XRDY) {
190 					REG(I2C_DXR) = (addr >> 8) & 0xff;
191 				} else {
192 					REG(I2C_CON) = 0;
193 					return(1);
194 				}
195 
196 				tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
197 
198 				CHECK_NACK();
199 				/* No break, fall through */
200 			case 1:
201 				/* Send address LSByte */
202 				if (tmp & I2C_STAT_XRDY) {
203 					REG(I2C_DXR) = addr & 0xff;
204 				} else {
205 					REG(I2C_CON) = 0;
206 					return(1);
207 				}
208 
209 				tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK | I2C_STAT_ARDY);
210 
211 				CHECK_NACK();
212 
213 				if (!(tmp & I2C_STAT_ARDY)) {
214 					REG(I2C_CON) = 0;
215 					return(1);
216 				}
217 		}
218 	}
219 
220 	/* Address phase is over, now read 'len' bytes and stop */
221 	tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP;
222 	REG(I2C_CNT) = len & 0xffff;
223 	REG(I2C_SA) = chip;
224 	REG(I2C_CON) = tmp;
225 
226 	for (i = 0; i < len; i++) {
227 		tmp = poll_i2c_irq(I2C_STAT_RRDY | I2C_STAT_NACK | I2C_STAT_ROVR);
228 
229 		CHECK_NACK();
230 
231 		if (tmp & I2C_STAT_RRDY) {
232 			buf[i] = REG(I2C_DRR);
233 		} else {
234 			REG(I2C_CON) = 0;
235 			return(1);
236 		}
237 	}
238 
239 	tmp = poll_i2c_irq(I2C_STAT_SCD | I2C_STAT_NACK);
240 
241 	CHECK_NACK();
242 
243 	if (!(tmp & I2C_STAT_SCD)) {
244 		REG(I2C_CON) = 0;
245 		return(1);
246 	}
247 
248 	flush_rx();
249 	REG(I2C_STAT) = 0xffff;
250 	REG(I2C_CNT) = 0;
251 	REG(I2C_CON) = 0;
252 
253 	return(0);
254 }
255 
256 
257 int i2c_write(u_int8_t chip, u_int32_t addr, int alen, u_int8_t *buf, int len)
258 {
259 	u_int32_t	tmp;
260 	int		i;
261 
262 	if ((alen < 0) || (alen > 2)) {
263 		printf("%s(): bogus address length %x\n", __FUNCTION__, alen);
264 		return(1);
265 	}
266 	if (len < 0) {
267 		printf("%s(): bogus length %x\n", __FUNCTION__, len);
268 		return(1);
269 	}
270 
271 	if (wait_for_bus()) {return(1);}
272 
273 	/* Start address phase */
274 	tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX | I2C_CON_STP;
275 	REG(I2C_CNT) = (alen == 0) ? len & 0xffff : (len & 0xffff) + alen;
276 	REG(I2C_SA) = chip;
277 	REG(I2C_CON) = tmp;
278 
279 	switch (alen) {
280 		case 2:
281 			/* Send address MSByte */
282 			tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
283 
284 			CHECK_NACK();
285 
286 			if (tmp & I2C_STAT_XRDY) {
287 				REG(I2C_DXR) = (addr >> 8) & 0xff;
288 			} else {
289 				REG(I2C_CON) = 0;
290 				return(1);
291 			}
292 			/* No break, fall through */
293 		case 1:
294 			/* Send address LSByte */
295 			tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
296 
297 			CHECK_NACK();
298 
299 			if (tmp & I2C_STAT_XRDY) {
300 				REG(I2C_DXR) = addr & 0xff;
301 			} else {
302 				REG(I2C_CON) = 0;
303 				return(1);
304 			}
305 	}
306 
307 	for (i = 0; i < len; i++) {
308 		tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
309 
310 		CHECK_NACK();
311 
312 		if (tmp & I2C_STAT_XRDY) {
313 			REG(I2C_DXR) = buf[i];
314 		} else {
315 			return(1);
316 		}
317 	}
318 
319 	tmp = poll_i2c_irq(I2C_STAT_SCD | I2C_STAT_NACK);
320 
321 	CHECK_NACK();
322 
323 	if (!(tmp & I2C_STAT_SCD)) {
324 		REG(I2C_CON) = 0;
325 		return(1);
326 	}
327 
328 	flush_rx();
329 	REG(I2C_STAT) = 0xffff;
330 	REG(I2C_CNT) = 0;
331 	REG(I2C_CON) = 0;
332 
333 	return(0);
334 }
335