1# 2# I2C subsystem configuration 3# 4 5menu "I2C support" 6 7config DM_I2C 8 bool "Enable Driver Model for I2C drivers" 9 depends on DM 10 help 11 Enable driver model for I2C. The I2C uclass interface: probe, read, 12 write and speed, is implemented with the bus drivers operations, 13 which provide methods for bus setting and data transfer. Each chip 14 device (bus child) info is kept as parent platdata. The interface 15 is defined in include/i2c.h. When i2c bus driver supports the i2c 16 uclass, but the device drivers not, then DM_I2C_COMPAT config can 17 be used as compatibility layer. 18 19config DM_I2C_COMPAT 20 bool "Enable I2C compatibility layer" 21 depends on DM 22 help 23 Enable old-style I2C functions for compatibility with existing code. 24 This option can be enabled as a temporary measure to avoid needing 25 to convert all code for a board in a single commit. It should not 26 be enabled for any board in an official release. 27 28config I2C_CROS_EC_TUNNEL 29 tristate "Chrome OS EC tunnel I2C bus" 30 depends on CROS_EC 31 help 32 This provides an I2C bus that will tunnel i2c commands through to 33 the other side of the Chrome OS EC to the I2C bus connected there. 34 This will work whatever the interface used to talk to the EC (SPI, 35 I2C or LPC). Some Chromebooks use this when the hardware design 36 does not allow direct access to the main PMIC from the AP. 37 38config I2C_CROS_EC_LDO 39 bool "Provide access to LDOs on the Chrome OS EC" 40 depends on CROS_EC 41 ---help--- 42 On many Chromebooks the main PMIC is inaccessible to the AP. This is 43 often dealt with by using an I2C pass-through interface provided by 44 the EC. On some unfortunate models (e.g. Spring) the pass-through 45 is not available, and an LDO message is available instead. This 46 option enables a driver which provides very basic access to those 47 regulators, via the EC. We implement this as an I2C bus which 48 emulates just the TPS65090 messages we know about. This is done to 49 avoid duplicating the logic in the TPS65090 regulator driver for 50 enabling/disabling an LDO. 51 52config DM_I2C_GPIO 53 bool "Enable Driver Model for software emulated I2C bus driver" 54 depends on DM_I2C && DM_GPIO 55 help 56 Enable the i2c bus driver emulation by using the GPIOs. The bus GPIO 57 configuration is given by the device tree. Kernel-style device tree 58 bindings are supported. 59 Binding info: doc/device-tree-bindings/i2c/i2c-gpio.txt 60 61config SYS_I2C_CADENCE 62 tristate "Cadence I2C Controller" 63 depends on DM_I2C && (ARCH_ZYNQ || ARM64) 64 help 65 Say yes here to select Cadence I2C Host Controller. This controller is 66 e.g. used by Xilinx Zynq. 67 68config SYS_I2C_INTEL 69 bool "Intel I2C/SMBUS driver" 70 depends on DM_I2C 71 help 72 Add support for the Intel SMBUS driver. So far this driver is just 73 a stub which perhaps some basic init. There is no implementation of 74 the I2C API meaning that any I2C operations will immediately fail 75 for now. 76 77config SYS_I2C_ROCKCHIP 78 bool "Rockchip I2C driver" 79 depends on DM_I2C 80 help 81 Add support for the Rockchip I2C driver. This is used with various 82 Rockchip parts such as RK3126, RK3128, RK3036 and RK3288. All chips 83 have several I2C ports and all are provided, controled by the 84 device tree. 85 86config SYS_I2C_SANDBOX 87 bool "Sandbox I2C driver" 88 depends on SANDBOX && DM_I2C 89 help 90 Enable I2C support for sandbox. This is an emulation of a real I2C 91 bus. Devices can be attached to the bus using the device tree 92 which specifies the driver to use. As an example, see this device 93 tree fragment from sandbox.dts. It shows that the I2C bus has a 94 single EEPROM at address 0x2c (7-bit address) which is emulated by 95 the driver for "sandbox,i2c-eeprom", which is in 96 drivers/misc/i2c_eeprom_emul.c. 97 98 i2c@0 { 99 #address-cells = <1>; 100 #size-cells = <0>; 101 reg = <0>; 102 compatible = "sandbox,i2c"; 103 clock-frequency = <400000>; 104 eeprom@2c { 105 reg = <0x2c>; 106 compatible = "i2c-eeprom"; 107 emul { 108 compatible = "sandbox,i2c-eeprom"; 109 sandbox,filename = "i2c.bin"; 110 sandbox,size = <128>; 111 }; 112 }; 113 }; 114 115 116config SYS_I2C_UNIPHIER 117 bool "UniPhier I2C driver" 118 depends on ARCH_UNIPHIER && DM_I2C 119 default y 120 help 121 Support for UniPhier I2C controller driver. This I2C controller 122 is used on PH1-LD4, PH1-sLD8 or older UniPhier SoCs. 123 124config SYS_I2C_UNIPHIER_F 125 bool "UniPhier FIFO-builtin I2C driver" 126 depends on ARCH_UNIPHIER && DM_I2C 127 default y 128 help 129 Support for UniPhier FIFO-builtin I2C controller driver. 130 This I2C controller is used on PH1-Pro4 or newer UniPhier SoCs. 131 132source "drivers/i2c/muxes/Kconfig" 133 134endmenu 135