1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Xilinx Zynq GPIO device driver 4 * 5 * Copyright (C) 2015 DAVE Embedded Systems <devel@dave.eu> 6 * 7 * Most of code taken from linux kernel driver (linux/drivers/gpio/gpio-zynq.c) 8 * Copyright (C) 2009 - 2014 Xilinx, Inc. 9 */ 10 11 #include <common.h> 12 #include <asm/gpio.h> 13 #include <asm/io.h> 14 #include <linux/errno.h> 15 #include <dm.h> 16 #include <fdtdec.h> 17 18 /* Maximum banks */ 19 #define ZYNQ_GPIO_MAX_BANK 4 20 21 #define ZYNQ_GPIO_BANK0_NGPIO 32 22 #define ZYNQ_GPIO_BANK1_NGPIO 22 23 #define ZYNQ_GPIO_BANK2_NGPIO 32 24 #define ZYNQ_GPIO_BANK3_NGPIO 32 25 26 #define ZYNQ_GPIO_NR_GPIOS (ZYNQ_GPIO_BANK0_NGPIO + \ 27 ZYNQ_GPIO_BANK1_NGPIO + \ 28 ZYNQ_GPIO_BANK2_NGPIO + \ 29 ZYNQ_GPIO_BANK3_NGPIO) 30 31 #define ZYNQMP_GPIO_MAX_BANK 6 32 33 #define ZYNQMP_GPIO_BANK0_NGPIO 26 34 #define ZYNQMP_GPIO_BANK1_NGPIO 26 35 #define ZYNQMP_GPIO_BANK2_NGPIO 26 36 #define ZYNQMP_GPIO_BANK3_NGPIO 32 37 #define ZYNQMP_GPIO_BANK4_NGPIO 32 38 #define ZYNQMP_GPIO_BANK5_NGPIO 32 39 40 #define ZYNQMP_GPIO_NR_GPIOS 174 41 42 #define ZYNQ_GPIO_BANK0_PIN_MIN(str) 0 43 #define ZYNQ_GPIO_BANK0_PIN_MAX(str) (ZYNQ_GPIO_BANK0_PIN_MIN(str) + \ 44 ZYNQ##str##_GPIO_BANK0_NGPIO - 1) 45 #define ZYNQ_GPIO_BANK1_PIN_MIN(str) (ZYNQ_GPIO_BANK0_PIN_MAX(str) + 1) 46 #define ZYNQ_GPIO_BANK1_PIN_MAX(str) (ZYNQ_GPIO_BANK1_PIN_MIN(str) + \ 47 ZYNQ##str##_GPIO_BANK1_NGPIO - 1) 48 #define ZYNQ_GPIO_BANK2_PIN_MIN(str) (ZYNQ_GPIO_BANK1_PIN_MAX(str) + 1) 49 #define ZYNQ_GPIO_BANK2_PIN_MAX(str) (ZYNQ_GPIO_BANK2_PIN_MIN(str) + \ 50 ZYNQ##str##_GPIO_BANK2_NGPIO - 1) 51 #define ZYNQ_GPIO_BANK3_PIN_MIN(str) (ZYNQ_GPIO_BANK2_PIN_MAX(str) + 1) 52 #define ZYNQ_GPIO_BANK3_PIN_MAX(str) (ZYNQ_GPIO_BANK3_PIN_MIN(str) + \ 53 ZYNQ##str##_GPIO_BANK3_NGPIO - 1) 54 #define ZYNQ_GPIO_BANK4_PIN_MIN(str) (ZYNQ_GPIO_BANK3_PIN_MAX(str) + 1) 55 #define ZYNQ_GPIO_BANK4_PIN_MAX(str) (ZYNQ_GPIO_BANK4_PIN_MIN(str) + \ 56 ZYNQ##str##_GPIO_BANK4_NGPIO - 1) 57 #define ZYNQ_GPIO_BANK5_PIN_MIN(str) (ZYNQ_GPIO_BANK4_PIN_MAX(str) + 1) 58 #define ZYNQ_GPIO_BANK5_PIN_MAX(str) (ZYNQ_GPIO_BANK5_PIN_MIN(str) + \ 59 ZYNQ##str##_GPIO_BANK5_NGPIO - 1) 60 61 /* Register offsets for the GPIO device */ 62 /* LSW Mask & Data -WO */ 63 #define ZYNQ_GPIO_DATA_LSW_OFFSET(BANK) (0x000 + (8 * BANK)) 64 /* MSW Mask & Data -WO */ 65 #define ZYNQ_GPIO_DATA_MSW_OFFSET(BANK) (0x004 + (8 * BANK)) 66 /* Data Register-RW */ 67 #define ZYNQ_GPIO_DATA_RO_OFFSET(BANK) (0x060 + (4 * BANK)) 68 /* Direction mode reg-RW */ 69 #define ZYNQ_GPIO_DIRM_OFFSET(BANK) (0x204 + (0x40 * BANK)) 70 /* Output enable reg-RW */ 71 #define ZYNQ_GPIO_OUTEN_OFFSET(BANK) (0x208 + (0x40 * BANK)) 72 /* Interrupt mask reg-RO */ 73 #define ZYNQ_GPIO_INTMASK_OFFSET(BANK) (0x20C + (0x40 * BANK)) 74 /* Interrupt enable reg-WO */ 75 #define ZYNQ_GPIO_INTEN_OFFSET(BANK) (0x210 + (0x40 * BANK)) 76 /* Interrupt disable reg-WO */ 77 #define ZYNQ_GPIO_INTDIS_OFFSET(BANK) (0x214 + (0x40 * BANK)) 78 /* Interrupt status reg-RO */ 79 #define ZYNQ_GPIO_INTSTS_OFFSET(BANK) (0x218 + (0x40 * BANK)) 80 /* Interrupt type reg-RW */ 81 #define ZYNQ_GPIO_INTTYPE_OFFSET(BANK) (0x21C + (0x40 * BANK)) 82 /* Interrupt polarity reg-RW */ 83 #define ZYNQ_GPIO_INTPOL_OFFSET(BANK) (0x220 + (0x40 * BANK)) 84 /* Interrupt on any, reg-RW */ 85 #define ZYNQ_GPIO_INTANY_OFFSET(BANK) (0x224 + (0x40 * BANK)) 86 87 /* Disable all interrupts mask */ 88 #define ZYNQ_GPIO_IXR_DISABLE_ALL 0xFFFFFFFF 89 90 /* Mid pin number of a bank */ 91 #define ZYNQ_GPIO_MID_PIN_NUM 16 92 93 /* GPIO upper 16 bit mask */ 94 #define ZYNQ_GPIO_UPPER_MASK 0xFFFF0000 95 96 struct zynq_gpio_privdata { 97 phys_addr_t base; 98 const struct zynq_platform_data *p_data; 99 }; 100 101 /** 102 * struct zynq_platform_data - zynq gpio platform data structure 103 * @label: string to store in gpio->label 104 * @ngpio: max number of gpio pins 105 * @max_bank: maximum number of gpio banks 106 * @bank_min: this array represents bank's min pin 107 * @bank_max: this array represents bank's max pin 108 */ 109 struct zynq_platform_data { 110 const char *label; 111 u16 ngpio; 112 u32 max_bank; 113 u32 bank_min[ZYNQMP_GPIO_MAX_BANK]; 114 u32 bank_max[ZYNQMP_GPIO_MAX_BANK]; 115 }; 116 117 static const struct zynq_platform_data zynqmp_gpio_def = { 118 .label = "zynqmp_gpio", 119 .ngpio = ZYNQMP_GPIO_NR_GPIOS, 120 .max_bank = ZYNQMP_GPIO_MAX_BANK, 121 .bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(MP), 122 .bank_max[0] = ZYNQ_GPIO_BANK0_PIN_MAX(MP), 123 .bank_min[1] = ZYNQ_GPIO_BANK1_PIN_MIN(MP), 124 .bank_max[1] = ZYNQ_GPIO_BANK1_PIN_MAX(MP), 125 .bank_min[2] = ZYNQ_GPIO_BANK2_PIN_MIN(MP), 126 .bank_max[2] = ZYNQ_GPIO_BANK2_PIN_MAX(MP), 127 .bank_min[3] = ZYNQ_GPIO_BANK3_PIN_MIN(MP), 128 .bank_max[3] = ZYNQ_GPIO_BANK3_PIN_MAX(MP), 129 .bank_min[4] = ZYNQ_GPIO_BANK4_PIN_MIN(MP), 130 .bank_max[4] = ZYNQ_GPIO_BANK4_PIN_MAX(MP), 131 .bank_min[5] = ZYNQ_GPIO_BANK5_PIN_MIN(MP), 132 .bank_max[5] = ZYNQ_GPIO_BANK5_PIN_MAX(MP), 133 }; 134 135 static const struct zynq_platform_data zynq_gpio_def = { 136 .label = "zynq_gpio", 137 .ngpio = ZYNQ_GPIO_NR_GPIOS, 138 .max_bank = ZYNQ_GPIO_MAX_BANK, 139 .bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(), 140 .bank_max[0] = ZYNQ_GPIO_BANK0_PIN_MAX(), 141 .bank_min[1] = ZYNQ_GPIO_BANK1_PIN_MIN(), 142 .bank_max[1] = ZYNQ_GPIO_BANK1_PIN_MAX(), 143 .bank_min[2] = ZYNQ_GPIO_BANK2_PIN_MIN(), 144 .bank_max[2] = ZYNQ_GPIO_BANK2_PIN_MAX(), 145 .bank_min[3] = ZYNQ_GPIO_BANK3_PIN_MIN(), 146 .bank_max[3] = ZYNQ_GPIO_BANK3_PIN_MAX(), 147 }; 148 149 /** 150 * zynq_gpio_get_bank_pin - Get the bank number and pin number within that bank 151 * for a given pin in the GPIO device 152 * @pin_num: gpio pin number within the device 153 * @bank_num: an output parameter used to return the bank number of the gpio 154 * pin 155 * @bank_pin_num: an output parameter used to return pin number within a bank 156 * for the given gpio pin 157 * 158 * Returns the bank number and pin offset within the bank. 159 */ 160 static inline void zynq_gpio_get_bank_pin(unsigned int pin_num, 161 unsigned int *bank_num, 162 unsigned int *bank_pin_num, 163 struct udevice *dev) 164 { 165 struct zynq_gpio_privdata *priv = dev_get_priv(dev); 166 u32 bank; 167 168 for (bank = 0; bank < priv->p_data->max_bank; bank++) { 169 if ((pin_num >= priv->p_data->bank_min[bank]) && 170 (pin_num <= priv->p_data->bank_max[bank])) { 171 *bank_num = bank; 172 *bank_pin_num = pin_num - 173 priv->p_data->bank_min[bank]; 174 return; 175 } 176 } 177 178 if (bank >= priv->p_data->max_bank) { 179 printf("Invalid bank and pin num\n"); 180 *bank_num = 0; 181 *bank_pin_num = 0; 182 } 183 } 184 185 static int gpio_is_valid(unsigned gpio, struct udevice *dev) 186 { 187 struct zynq_gpio_privdata *priv = dev_get_priv(dev); 188 189 return gpio < priv->p_data->ngpio; 190 } 191 192 static int check_gpio(unsigned gpio, struct udevice *dev) 193 { 194 if (!gpio_is_valid(gpio, dev)) { 195 printf("ERROR : check_gpio: invalid GPIO %d\n", gpio); 196 return -1; 197 } 198 return 0; 199 } 200 201 static int zynq_gpio_get_value(struct udevice *dev, unsigned gpio) 202 { 203 u32 data; 204 unsigned int bank_num, bank_pin_num; 205 struct zynq_gpio_privdata *priv = dev_get_priv(dev); 206 207 if (check_gpio(gpio, dev) < 0) 208 return -1; 209 210 zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num, dev); 211 212 data = readl(priv->base + 213 ZYNQ_GPIO_DATA_RO_OFFSET(bank_num)); 214 215 return (data >> bank_pin_num) & 1; 216 } 217 218 static int zynq_gpio_set_value(struct udevice *dev, unsigned gpio, int value) 219 { 220 unsigned int reg_offset, bank_num, bank_pin_num; 221 struct zynq_gpio_privdata *priv = dev_get_priv(dev); 222 223 if (check_gpio(gpio, dev) < 0) 224 return -1; 225 226 zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num, dev); 227 228 if (bank_pin_num >= ZYNQ_GPIO_MID_PIN_NUM) { 229 /* only 16 data bits in bit maskable reg */ 230 bank_pin_num -= ZYNQ_GPIO_MID_PIN_NUM; 231 reg_offset = ZYNQ_GPIO_DATA_MSW_OFFSET(bank_num); 232 } else { 233 reg_offset = ZYNQ_GPIO_DATA_LSW_OFFSET(bank_num); 234 } 235 236 /* 237 * get the 32 bit value to be written to the mask/data register where 238 * the upper 16 bits is the mask and lower 16 bits is the data 239 */ 240 value = !!value; 241 value = ~(1 << (bank_pin_num + ZYNQ_GPIO_MID_PIN_NUM)) & 242 ((value << bank_pin_num) | ZYNQ_GPIO_UPPER_MASK); 243 244 writel(value, priv->base + reg_offset); 245 246 return 0; 247 } 248 249 static int zynq_gpio_direction_input(struct udevice *dev, unsigned gpio) 250 { 251 u32 reg; 252 unsigned int bank_num, bank_pin_num; 253 struct zynq_gpio_privdata *priv = dev_get_priv(dev); 254 255 if (check_gpio(gpio, dev) < 0) 256 return -1; 257 258 zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num, dev); 259 260 /* bank 0 pins 7 and 8 are special and cannot be used as inputs */ 261 if (bank_num == 0 && (bank_pin_num == 7 || bank_pin_num == 8)) 262 return -1; 263 264 /* clear the bit in direction mode reg to set the pin as input */ 265 reg = readl(priv->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num)); 266 reg &= ~BIT(bank_pin_num); 267 writel(reg, priv->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num)); 268 269 return 0; 270 } 271 272 static int zynq_gpio_direction_output(struct udevice *dev, unsigned gpio, 273 int value) 274 { 275 u32 reg; 276 unsigned int bank_num, bank_pin_num; 277 struct zynq_gpio_privdata *priv = dev_get_priv(dev); 278 279 if (check_gpio(gpio, dev) < 0) 280 return -1; 281 282 zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num, dev); 283 284 /* set the GPIO pin as output */ 285 reg = readl(priv->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num)); 286 reg |= BIT(bank_pin_num); 287 writel(reg, priv->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num)); 288 289 /* configure the output enable reg for the pin */ 290 reg = readl(priv->base + ZYNQ_GPIO_OUTEN_OFFSET(bank_num)); 291 reg |= BIT(bank_pin_num); 292 writel(reg, priv->base + ZYNQ_GPIO_OUTEN_OFFSET(bank_num)); 293 294 /* set the state of the pin */ 295 gpio_set_value(gpio, value); 296 return 0; 297 } 298 299 static int zynq_gpio_get_function(struct udevice *dev, unsigned offset) 300 { 301 u32 reg; 302 unsigned int bank_num, bank_pin_num; 303 struct zynq_gpio_privdata *priv = dev_get_priv(dev); 304 305 if (check_gpio(offset, dev) < 0) 306 return -1; 307 308 zynq_gpio_get_bank_pin(offset, &bank_num, &bank_pin_num, dev); 309 310 /* set the GPIO pin as output */ 311 reg = readl(priv->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num)); 312 reg &= BIT(bank_pin_num); 313 if (reg) 314 return GPIOF_OUTPUT; 315 else 316 return GPIOF_INPUT; 317 } 318 319 static const struct dm_gpio_ops gpio_zynq_ops = { 320 .direction_input = zynq_gpio_direction_input, 321 .direction_output = zynq_gpio_direction_output, 322 .get_value = zynq_gpio_get_value, 323 .set_value = zynq_gpio_set_value, 324 .get_function = zynq_gpio_get_function, 325 }; 326 327 static const struct udevice_id zynq_gpio_ids[] = { 328 { .compatible = "xlnx,zynq-gpio-1.0", 329 .data = (ulong)&zynq_gpio_def}, 330 { .compatible = "xlnx,zynqmp-gpio-1.0", 331 .data = (ulong)&zynqmp_gpio_def}, 332 { } 333 }; 334 335 static int zynq_gpio_probe(struct udevice *dev) 336 { 337 struct zynq_gpio_privdata *priv = dev_get_priv(dev); 338 struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); 339 340 uc_priv->bank_name = dev->name; 341 342 if (priv->p_data) 343 uc_priv->gpio_count = priv->p_data->ngpio; 344 345 return 0; 346 } 347 348 static int zynq_gpio_ofdata_to_platdata(struct udevice *dev) 349 { 350 struct zynq_gpio_privdata *priv = dev_get_priv(dev); 351 352 priv->base = (phys_addr_t)dev_read_addr(dev); 353 354 priv->p_data = (struct zynq_platform_data *)dev_get_driver_data(dev); 355 356 return 0; 357 } 358 359 U_BOOT_DRIVER(gpio_zynq) = { 360 .name = "gpio_zynq", 361 .id = UCLASS_GPIO, 362 .ops = &gpio_zynq_ops, 363 .of_match = zynq_gpio_ids, 364 .ofdata_to_platdata = zynq_gpio_ofdata_to_platdata, 365 .probe = zynq_gpio_probe, 366 .priv_auto_alloc_size = sizeof(struct zynq_gpio_privdata), 367 }; 368