1 /* 2 * Copyright 2013 Texas Instruments, Inc. 3 * Author: Dan Murphy <dmurphy@ti.com> 4 * 5 * Derived work from the pca953x.c driver 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 #include <common.h> 24 #include <i2c.h> 25 #include <tca642x.h> 26 27 /* tca642x register address definitions */ 28 struct tca642x_bank_info tca642x_regs[] = { 29 { .input_reg = 0x00, 30 .output_reg = 0x04, 31 .polarity_reg = 0x08, 32 .configuration_reg = 0x0c }, 33 { .input_reg = 0x01, 34 .output_reg = 0x05, 35 .polarity_reg = 0x09, 36 .configuration_reg = 0x0d }, 37 { .input_reg = 0x02, 38 .output_reg = 0x06, 39 .polarity_reg = 0x0a, 40 .configuration_reg = 0x0e }, 41 }; 42 43 /* 44 * Modify masked bits in register 45 */ 46 static int tca642x_reg_write(uchar chip, uint8_t addr, 47 uint8_t reg_bit, uint8_t data) 48 { 49 uint8_t valw; 50 int org_bus_num; 51 int ret; 52 53 org_bus_num = i2c_get_bus_num(); 54 i2c_set_bus_num(CONFIG_SYS_I2C_TCA642X_BUS_NUM); 55 56 if (i2c_read(chip, addr, 1, (uint8_t *)&valw, 1)) { 57 printf("Could not read before writing\n"); 58 ret = -1; 59 goto error; 60 } 61 valw &= ~reg_bit; 62 valw |= data; 63 64 ret = i2c_write(chip, addr, 1, (u8 *)&valw, 1); 65 66 error: 67 i2c_set_bus_num(org_bus_num); 68 return ret; 69 } 70 71 static int tca642x_reg_read(uchar chip, uint8_t addr, uint8_t *data) 72 { 73 uint8_t valw; 74 int org_bus_num; 75 int ret = 0; 76 77 org_bus_num = i2c_get_bus_num(); 78 i2c_set_bus_num(CONFIG_SYS_I2C_TCA642X_BUS_NUM); 79 if (i2c_read(chip, addr, 1, (u8 *)&valw, 1)) { 80 ret = -1; 81 goto error; 82 } 83 84 *data = valw; 85 86 error: 87 i2c_set_bus_num(org_bus_num); 88 return ret; 89 } 90 91 /* 92 * Set output value of IO pins in 'reg_bit' to corresponding value in 'data' 93 * 0 = low, 1 = high 94 */ 95 int tca642x_set_val(uchar chip, uint8_t gpio_bank, 96 uint8_t reg_bit, uint8_t data) 97 { 98 uint8_t out_reg = tca642x_regs[gpio_bank].output_reg; 99 100 return tca642x_reg_write(chip, out_reg, reg_bit, data); 101 } 102 103 /* 104 * Set read polarity of IO pins in 'reg_bit' to corresponding value in 'data' 105 * 0 = read pin value, 1 = read inverted pin value 106 */ 107 int tca642x_set_pol(uchar chip, uint8_t gpio_bank, 108 uint8_t reg_bit, uint8_t data) 109 { 110 uint8_t pol_reg = tca642x_regs[gpio_bank].polarity_reg; 111 112 return tca642x_reg_write(chip, pol_reg, reg_bit, data); 113 } 114 115 /* 116 * Set direction of IO pins in 'reg_bit' to corresponding value in 'data' 117 * 0 = output, 1 = input 118 */ 119 int tca642x_set_dir(uchar chip, uint8_t gpio_bank, 120 uint8_t reg_bit, uint8_t data) 121 { 122 uint8_t config_reg = tca642x_regs[gpio_bank].configuration_reg; 123 124 return tca642x_reg_write(chip, config_reg, reg_bit, data); 125 } 126 127 /* 128 * Read current logic level of all IO pins 129 */ 130 int tca642x_get_val(uchar chip, uint8_t gpio_bank) 131 { 132 uint8_t val; 133 uint8_t in_reg = tca642x_regs[gpio_bank].input_reg; 134 135 if (tca642x_reg_read(chip, in_reg, &val) < 0) 136 return -1; 137 138 return (int)val; 139 } 140 141 /* 142 * Set the inital register states for the tca642x gpio expander 143 */ 144 int tca642x_set_inital_state(uchar chip, struct tca642x_bank_info init_data[]) 145 { 146 int i, ret; 147 uint8_t config_reg; 148 uint8_t polarity_reg; 149 uint8_t output_reg; 150 151 for (i = 0; i < 3; i++) { 152 config_reg = tca642x_regs[i].configuration_reg; 153 ret = tca642x_reg_write(chip, config_reg, 0xff, 154 init_data[i].configuration_reg); 155 polarity_reg = tca642x_regs[i].polarity_reg; 156 ret = tca642x_reg_write(chip, polarity_reg, 0xff, 157 init_data[i].polarity_reg); 158 output_reg = tca642x_regs[i].output_reg; 159 ret = tca642x_reg_write(chip, output_reg, 0xff, 160 init_data[i].output_reg); 161 } 162 163 return ret; 164 } 165 166 #if defined(CONFIG_CMD_TCA642X) && !defined(CONFIG_SPL_BUILD) 167 /* 168 * Display tca642x information 169 */ 170 static int tca642x_info(uchar chip) 171 { 172 int i, j; 173 uint8_t data; 174 175 printf("tca642x@ 0x%x (%d pins):\n", chip, 24); 176 for (i = 0; i < 3; i++) { 177 printf("Bank %i\n", i); 178 if (tca642x_reg_read(chip, 179 tca642x_regs[i].configuration_reg, 180 &data) < 0) 181 return -1; 182 printf("\tConfiguration: "); 183 for (j = 7; j >= 0; j--) 184 printf("%c", data & (1 << j) ? 'i' : 'o'); 185 printf("\n"); 186 187 if (tca642x_reg_read(chip, 188 tca642x_regs[i].polarity_reg, &data) < 0) 189 return -1; 190 printf("\tPolarity: "); 191 for (j = 7; j >= 0; j--) 192 printf("%c", data & (1 << j) ? '1' : '0'); 193 printf("\n"); 194 195 if (tca642x_reg_read(chip, 196 tca642x_regs[i].input_reg, &data) < 0) 197 return -1; 198 printf("\tInput value: "); 199 for (j = 7; j >= 0; j--) 200 printf("%c", data & (1 << j) ? '1' : '0'); 201 printf("\n"); 202 203 if (tca642x_reg_read(chip, 204 tca642x_regs[i].output_reg, &data) < 0) 205 return -1; 206 printf("\tOutput value: "); 207 for (j = 7; j >= 0; j--) 208 printf("%c", data & (1 << j) ? '1' : '0'); 209 printf("\n"); 210 } 211 212 return 0; 213 } 214 215 static cmd_tbl_t cmd_tca642x[] = { 216 U_BOOT_CMD_MKENT(device, 3, 0, (void *)TCA642X_CMD_DEVICE, "", ""), 217 U_BOOT_CMD_MKENT(output, 4, 0, (void *)TCA642X_CMD_OUTPUT, "", ""), 218 U_BOOT_CMD_MKENT(input, 3, 0, (void *)TCA642X_CMD_INPUT, "", ""), 219 U_BOOT_CMD_MKENT(invert, 4, 0, (void *)TCA642X_CMD_INVERT, "", ""), 220 U_BOOT_CMD_MKENT(info, 2, 0, (void *)TCA642X_CMD_INFO, "", ""), 221 }; 222 223 static int do_tca642x(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 224 { 225 static uchar chip = CONFIG_SYS_I2C_TCA642X_ADDR; 226 int ret = CMD_RET_USAGE, val; 227 uint8_t gpio_bank = 0; 228 uint8_t bank_shift; 229 ulong ul_arg2 = 0; 230 ulong ul_arg3 = 0; 231 cmd_tbl_t *c; 232 233 c = find_cmd_tbl(argv[1], cmd_tca642x, ARRAY_SIZE(cmd_tca642x)); 234 235 /* All commands but "device" require 'maxargs' arguments */ 236 if (!c || 237 !((argc == (c->maxargs)) || 238 (((int)c->cmd == TCA642X_CMD_DEVICE) && 239 (argc == (c->maxargs - 1))))) { 240 return CMD_RET_USAGE; 241 } 242 243 /* arg2 used as chip number or pin number */ 244 if (argc > 2) 245 ul_arg2 = simple_strtoul(argv[2], NULL, 10); 246 247 /* arg3 used as pin or invert value */ 248 if (argc > 3) { 249 ul_arg3 = simple_strtoul(argv[3], NULL, 10) & 0x1; 250 if (ul_arg2 <= 7) { 251 gpio_bank = 0; 252 } else if ((ul_arg2 >= 10) && (ul_arg2 <= 17)) { 253 gpio_bank = 1; 254 } else if ((ul_arg2 >= 20) && (ul_arg2 <= 27)) { 255 gpio_bank = 2; 256 } else { 257 printf("Requested pin is not available\n"); 258 ret = CMD_RET_FAILURE; 259 goto error; 260 } 261 } 262 263 switch ((int)c->cmd) { 264 case TCA642X_CMD_INFO: 265 ret = tca642x_info(chip); 266 if (ret) 267 ret = CMD_RET_FAILURE; 268 break; 269 270 case TCA642X_CMD_DEVICE: 271 if (argc == 3) 272 chip = (uint8_t)ul_arg2; 273 printf("Current device address: 0x%x\n", chip); 274 ret = CMD_RET_SUCCESS; 275 break; 276 277 case TCA642X_CMD_INPUT: 278 bank_shift = ul_arg2 - (gpio_bank * 10); 279 ret = tca642x_set_dir(chip, gpio_bank, (1 << bank_shift), 280 TCA642X_DIR_IN << bank_shift); 281 val = (tca642x_get_val(chip, gpio_bank) & 282 (1 << bank_shift)) != 0; 283 284 if (ret) 285 ret = CMD_RET_FAILURE; 286 else 287 printf("chip 0x%02x, pin 0x%lx = %d\n", chip, 288 ul_arg2, val); 289 break; 290 291 case TCA642X_CMD_OUTPUT: 292 bank_shift = ul_arg2 - (gpio_bank * 10); 293 ret = tca642x_set_dir(chip, gpio_bank, (1 << bank_shift), 294 (TCA642X_DIR_OUT << bank_shift)); 295 if (!ret) 296 ret = tca642x_set_val(chip, 297 gpio_bank, (1 << bank_shift), 298 (ul_arg3 << bank_shift)); 299 if (ret) 300 ret = CMD_RET_FAILURE; 301 break; 302 303 case TCA642X_CMD_INVERT: 304 bank_shift = ul_arg2 - (gpio_bank * 10); 305 ret = tca642x_set_pol(chip, gpio_bank, (1 << bank_shift), 306 (ul_arg3 << bank_shift)); 307 if (ret) 308 ret = CMD_RET_FAILURE; 309 break; 310 } 311 error: 312 if (ret == CMD_RET_FAILURE) 313 eprintf("Error talking to chip at 0x%x\n", chip); 314 315 return ret; 316 } 317 318 U_BOOT_CMD( 319 tca642x, 5, 1, do_tca642x, 320 "tca642x gpio access", 321 "device [dev]\n" 322 " - show or set current device address\n" 323 "tca642x info\n" 324 " - display info for current chip\n" 325 "tca642x output pin 0|1\n" 326 " - set pin as output and drive low or high\n" 327 "tca642x invert pin 0|1\n" 328 " - disable/enable polarity inversion for reads\n" 329 "tca642x input pin\n" 330 " - set pin as input and read value" 331 ); 332 333 #endif /* CONFIG_CMD_TCA642X */ 334