xref: /openbmc/u-boot/drivers/gpio/mxc_gpio.c (revision cbd2fba1)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2009
4  * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
5  *
6  * Copyright (C) 2011
7  * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
8  */
9 #include <common.h>
10 #include <errno.h>
11 #include <dm.h>
12 #include <malloc.h>
13 #include <asm/arch/imx-regs.h>
14 #include <asm/gpio.h>
15 #include <asm/io.h>
16 
17 enum mxc_gpio_direction {
18 	MXC_GPIO_DIRECTION_IN,
19 	MXC_GPIO_DIRECTION_OUT,
20 };
21 
22 #define GPIO_PER_BANK			32
23 
24 struct mxc_gpio_plat {
25 	int bank_index;
26 	struct gpio_regs *regs;
27 };
28 
29 struct mxc_bank_info {
30 	struct gpio_regs *regs;
31 };
32 
33 #ifndef CONFIG_DM_GPIO
34 #define GPIO_TO_PORT(n)		(n / 32)
35 
36 /* GPIO port description */
37 static unsigned long gpio_ports[] = {
38 	[0] = GPIO1_BASE_ADDR,
39 	[1] = GPIO2_BASE_ADDR,
40 	[2] = GPIO3_BASE_ADDR,
41 #if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
42 		defined(CONFIG_MX53) || defined(CONFIG_MX6) || \
43 		defined(CONFIG_MX7) || defined(CONFIG_MX8M) || \
44 		defined(CONFIG_ARCH_IMX8)
45 	[3] = GPIO4_BASE_ADDR,
46 #endif
47 #if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) || \
48 		defined(CONFIG_MX7) || defined(CONFIG_MX8M) || \
49 		defined(CONFIG_ARCH_IMX8)
50 	[4] = GPIO5_BASE_ADDR,
51 #if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || defined(CONFIG_MX8M))
52 	[5] = GPIO6_BASE_ADDR,
53 #endif
54 #endif
55 #if defined(CONFIG_MX53) || defined(CONFIG_MX6) || defined(CONFIG_MX7) || \
56 		defined(CONFIG_ARCH_IMX8)
57 #if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
58 	[6] = GPIO7_BASE_ADDR,
59 #endif
60 #endif
61 #if defined(CONFIG_ARCH_IMX8)
62 	[7] = GPIO8_BASE_ADDR,
63 #endif
64 };
65 
66 static int mxc_gpio_direction(unsigned int gpio,
67 	enum mxc_gpio_direction direction)
68 {
69 	unsigned int port = GPIO_TO_PORT(gpio);
70 	struct gpio_regs *regs;
71 	u32 l;
72 
73 	if (port >= ARRAY_SIZE(gpio_ports))
74 		return -1;
75 
76 	gpio &= 0x1f;
77 
78 	regs = (struct gpio_regs *)gpio_ports[port];
79 
80 	l = readl(&regs->gpio_dir);
81 
82 	switch (direction) {
83 	case MXC_GPIO_DIRECTION_OUT:
84 		l |= 1 << gpio;
85 		break;
86 	case MXC_GPIO_DIRECTION_IN:
87 		l &= ~(1 << gpio);
88 	}
89 	writel(l, &regs->gpio_dir);
90 
91 	return 0;
92 }
93 
94 int gpio_set_value(unsigned gpio, int value)
95 {
96 	unsigned int port = GPIO_TO_PORT(gpio);
97 	struct gpio_regs *regs;
98 	u32 l;
99 
100 	if (port >= ARRAY_SIZE(gpio_ports))
101 		return -1;
102 
103 	gpio &= 0x1f;
104 
105 	regs = (struct gpio_regs *)gpio_ports[port];
106 
107 	l = readl(&regs->gpio_dr);
108 	if (value)
109 		l |= 1 << gpio;
110 	else
111 		l &= ~(1 << gpio);
112 	writel(l, &regs->gpio_dr);
113 
114 	return 0;
115 }
116 
117 int gpio_get_value(unsigned gpio)
118 {
119 	unsigned int port = GPIO_TO_PORT(gpio);
120 	struct gpio_regs *regs;
121 	u32 val;
122 
123 	if (port >= ARRAY_SIZE(gpio_ports))
124 		return -1;
125 
126 	gpio &= 0x1f;
127 
128 	regs = (struct gpio_regs *)gpio_ports[port];
129 
130 	val = (readl(&regs->gpio_psr) >> gpio) & 0x01;
131 
132 	return val;
133 }
134 
135 int gpio_request(unsigned gpio, const char *label)
136 {
137 	unsigned int port = GPIO_TO_PORT(gpio);
138 	if (port >= ARRAY_SIZE(gpio_ports))
139 		return -1;
140 	return 0;
141 }
142 
143 int gpio_free(unsigned gpio)
144 {
145 	return 0;
146 }
147 
148 int gpio_direction_input(unsigned gpio)
149 {
150 	return mxc_gpio_direction(gpio, MXC_GPIO_DIRECTION_IN);
151 }
152 
153 int gpio_direction_output(unsigned gpio, int value)
154 {
155 	int ret = gpio_set_value(gpio, value);
156 
157 	if (ret < 0)
158 		return ret;
159 
160 	return mxc_gpio_direction(gpio, MXC_GPIO_DIRECTION_OUT);
161 }
162 #endif
163 
164 #ifdef CONFIG_DM_GPIO
165 #include <fdtdec.h>
166 static int mxc_gpio_is_output(struct gpio_regs *regs, int offset)
167 {
168 	u32 val;
169 
170 	val = readl(&regs->gpio_dir);
171 
172 	return val & (1 << offset) ? 1 : 0;
173 }
174 
175 static void mxc_gpio_bank_direction(struct gpio_regs *regs, int offset,
176 				    enum mxc_gpio_direction direction)
177 {
178 	u32 l;
179 
180 	l = readl(&regs->gpio_dir);
181 
182 	switch (direction) {
183 	case MXC_GPIO_DIRECTION_OUT:
184 		l |= 1 << offset;
185 		break;
186 	case MXC_GPIO_DIRECTION_IN:
187 		l &= ~(1 << offset);
188 	}
189 	writel(l, &regs->gpio_dir);
190 }
191 
192 static void mxc_gpio_bank_set_value(struct gpio_regs *regs, int offset,
193 				    int value)
194 {
195 	u32 l;
196 
197 	l = readl(&regs->gpio_dr);
198 	if (value)
199 		l |= 1 << offset;
200 	else
201 		l &= ~(1 << offset);
202 	writel(l, &regs->gpio_dr);
203 }
204 
205 static int mxc_gpio_bank_get_value(struct gpio_regs *regs, int offset)
206 {
207 	return (readl(&regs->gpio_psr) >> offset) & 0x01;
208 }
209 
210 /* set GPIO pin 'gpio' as an input */
211 static int mxc_gpio_direction_input(struct udevice *dev, unsigned offset)
212 {
213 	struct mxc_bank_info *bank = dev_get_priv(dev);
214 
215 	/* Configure GPIO direction as input. */
216 	mxc_gpio_bank_direction(bank->regs, offset, MXC_GPIO_DIRECTION_IN);
217 
218 	return 0;
219 }
220 
221 /* set GPIO pin 'gpio' as an output, with polarity 'value' */
222 static int mxc_gpio_direction_output(struct udevice *dev, unsigned offset,
223 				       int value)
224 {
225 	struct mxc_bank_info *bank = dev_get_priv(dev);
226 
227 	/* Configure GPIO output value. */
228 	mxc_gpio_bank_set_value(bank->regs, offset, value);
229 
230 	/* Configure GPIO direction as output. */
231 	mxc_gpio_bank_direction(bank->regs, offset, MXC_GPIO_DIRECTION_OUT);
232 
233 	return 0;
234 }
235 
236 /* read GPIO IN value of pin 'gpio' */
237 static int mxc_gpio_get_value(struct udevice *dev, unsigned offset)
238 {
239 	struct mxc_bank_info *bank = dev_get_priv(dev);
240 
241 	return mxc_gpio_bank_get_value(bank->regs, offset);
242 }
243 
244 /* write GPIO OUT value to pin 'gpio' */
245 static int mxc_gpio_set_value(struct udevice *dev, unsigned offset,
246 				 int value)
247 {
248 	struct mxc_bank_info *bank = dev_get_priv(dev);
249 
250 	mxc_gpio_bank_set_value(bank->regs, offset, value);
251 
252 	return 0;
253 }
254 
255 static int mxc_gpio_get_function(struct udevice *dev, unsigned offset)
256 {
257 	struct mxc_bank_info *bank = dev_get_priv(dev);
258 
259 	/* GPIOF_FUNC is not implemented yet */
260 	if (mxc_gpio_is_output(bank->regs, offset))
261 		return GPIOF_OUTPUT;
262 	else
263 		return GPIOF_INPUT;
264 }
265 
266 static const struct dm_gpio_ops gpio_mxc_ops = {
267 	.direction_input	= mxc_gpio_direction_input,
268 	.direction_output	= mxc_gpio_direction_output,
269 	.get_value		= mxc_gpio_get_value,
270 	.set_value		= mxc_gpio_set_value,
271 	.get_function		= mxc_gpio_get_function,
272 };
273 
274 static int mxc_gpio_probe(struct udevice *dev)
275 {
276 	struct mxc_bank_info *bank = dev_get_priv(dev);
277 	struct mxc_gpio_plat *plat = dev_get_platdata(dev);
278 	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
279 	int banknum;
280 	char name[18], *str;
281 
282 	banknum = plat->bank_index;
283 	sprintf(name, "GPIO%d_", banknum + 1);
284 	str = strdup(name);
285 	if (!str)
286 		return -ENOMEM;
287 	uc_priv->bank_name = str;
288 	uc_priv->gpio_count = GPIO_PER_BANK;
289 	bank->regs = plat->regs;
290 
291 	return 0;
292 }
293 
294 static int mxc_gpio_bind(struct udevice *dev)
295 {
296 	struct mxc_gpio_plat *plat = dev->platdata;
297 	fdt_addr_t addr;
298 
299 	/*
300 	 * If platdata already exsits, directly return.
301 	 * Actually only when DT is not supported, platdata
302 	 * is statically initialized in U_BOOT_DEVICES.Here
303 	 * will return.
304 	 */
305 	if (plat)
306 		return 0;
307 
308 	addr = devfdt_get_addr(dev);
309 	if (addr == FDT_ADDR_T_NONE)
310 		return -EINVAL;
311 
312 	/*
313 	 * TODO:
314 	 * When every board is converted to driver model and DT is supported,
315 	 * this can be done by auto-alloc feature, but not using calloc
316 	 * to alloc memory for platdata.
317 	 *
318 	 * For example mxc_plat below uses platform data rather than device
319 	 * tree.
320 	 *
321 	 * NOTE: DO NOT COPY this code if you are using device tree.
322 	 */
323 	plat = calloc(1, sizeof(*plat));
324 	if (!plat)
325 		return -ENOMEM;
326 
327 	plat->regs = (struct gpio_regs *)addr;
328 	plat->bank_index = dev->req_seq;
329 	dev->platdata = plat;
330 
331 	return 0;
332 }
333 
334 static const struct udevice_id mxc_gpio_ids[] = {
335 	{ .compatible = "fsl,imx35-gpio" },
336 	{ }
337 };
338 
339 U_BOOT_DRIVER(gpio_mxc) = {
340 	.name	= "gpio_mxc",
341 	.id	= UCLASS_GPIO,
342 	.ops	= &gpio_mxc_ops,
343 	.probe	= mxc_gpio_probe,
344 	.priv_auto_alloc_size = sizeof(struct mxc_bank_info),
345 	.of_match = mxc_gpio_ids,
346 	.bind	= mxc_gpio_bind,
347 };
348 
349 #if !CONFIG_IS_ENABLED(OF_CONTROL)
350 static const struct mxc_gpio_plat mxc_plat[] = {
351 	{ 0, (struct gpio_regs *)GPIO1_BASE_ADDR },
352 	{ 1, (struct gpio_regs *)GPIO2_BASE_ADDR },
353 	{ 2, (struct gpio_regs *)GPIO3_BASE_ADDR },
354 #if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
355 		defined(CONFIG_MX53) || defined(CONFIG_MX6) || \
356 		defined(CONFIG_MX8M) || defined(CONFIG_ARCH_IMX8)
357 	{ 3, (struct gpio_regs *)GPIO4_BASE_ADDR },
358 #endif
359 #if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) || \
360 		defined(CONFIG_MX8M) || defined(CONFIG_ARCH_IMX8)
361 	{ 4, (struct gpio_regs *)GPIO5_BASE_ADDR },
362 #ifndef CONFIG_MX8M
363 	{ 5, (struct gpio_regs *)GPIO6_BASE_ADDR },
364 #endif
365 #endif
366 #if defined(CONFIG_MX53) || defined(CONFIG_MX6) || defined(CONFIG_ARCH_IMX8)
367 	{ 6, (struct gpio_regs *)GPIO7_BASE_ADDR },
368 #endif
369 #if defined(CONFIG_ARCH_IMX8)
370 	{ 7, (struct gpio_regs *)GPIO8_BASE_ADDR },
371 #endif
372 };
373 
374 U_BOOT_DEVICES(mxc_gpios) = {
375 	{ "gpio_mxc", &mxc_plat[0] },
376 	{ "gpio_mxc", &mxc_plat[1] },
377 	{ "gpio_mxc", &mxc_plat[2] },
378 #if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
379 		defined(CONFIG_MX53) || defined(CONFIG_MX6) || \
380 		defined(CONFIG_MX8M) || defined(CONFIG_ARCH_IMX8)
381 	{ "gpio_mxc", &mxc_plat[3] },
382 #endif
383 #if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) || \
384 		defined(CONFIG_MX8M) || defined(CONFIG_ARCH_IMX8)
385 	{ "gpio_mxc", &mxc_plat[4] },
386 #ifndef CONFIG_MX8M
387 	{ "gpio_mxc", &mxc_plat[5] },
388 #endif
389 #endif
390 #if defined(CONFIG_MX53) || defined(CONFIG_MX6) || defined(CONFIG_ARCH_IMX8)
391 	{ "gpio_mxc", &mxc_plat[6] },
392 #endif
393 #if defined(CONFIG_ARCH_IMX8)
394 	{ "gpio_mxc", &mxc_plat[7] },
395 #endif
396 };
397 #endif
398 #endif
399