xref: /openbmc/u-boot/drivers/gpio/mvgpio.h (revision ed09a554)
1 /*
2  * (C) Copyright 2011
3  * eInfochips Ltd. <www.einfochips.com>
4  * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
5  *
6  * (C) Copyright 2010
7  * Marvell Semiconductor <www.marvell.com>
8  *
9  * SPDX-License-Identifier:	GPL-2.0+
10  */
11 
12 #ifndef __MVGPIO_H__
13 #define __MVGPIO_H__
14 
15 #include <common.h>
16 
17 #ifdef CONFIG_SHEEVA_88SV331xV5
18 /*
19  * GPIO Register map for SHEEVA 88SV331xV5
20  */
21 struct gpio_reg {
22 	u32 gplr;	/* Pin Level Register - 0x0000 */
23 	u32 pad0[2];
24 	u32 gpdr;	/* Pin Direction Register - 0x000C */
25 	u32 pad1[2];
26 	u32 gpsr;	/* Pin Output Set Register - 0x0018 */
27 	u32 pad2[2];
28 	u32 gpcr;	/* Pin Output Clear Register - 0x0024 */
29 	u32 pad3[2];
30 	u32 grer;	/* Rising-Edge Detect Enable Register - 0x0030 */
31 	u32 pad4[2];
32 	u32 gfer;	/* Falling-Edge Detect Enable Register - 0x003C */
33 	u32 pad5[2];
34 	u32 gedr;	/* Edge Detect Status Register - 0x0048 */
35 	u32 pad6[2];
36 	u32 gsdr;	/* Bitwise Set of GPIO Direction Register - 0x0054 */
37 	u32 pad7[2];
38 	u32 gcdr;	/* Bitwise Clear of GPIO Direction Register - 0x0060 */
39 	u32 pad8[2];
40 	u32 gsrer;	/* Bitwise Set of Rising-Edge Detect Enable
41 			   Register - 0x006C */
42 	u32 pad9[2];
43 	u32 gcrer;	/* Bitwise Clear of Rising-Edge Detect Enable
44 			   Register - 0x0078 */
45 	u32 pad10[2];
46 	u32 gsfer;	/* Bitwise Set of Falling-Edge Detect Enable
47 			   Register - 0x0084 */
48 	u32 pad11[2];
49 	u32 gcfer;	/* Bitwise Clear of Falling-Edge Detect Enable
50 			   Register - 0x0090 */
51 	u32 pad12[2];
52 	u32 apmask;	/* Bitwise Mask of Edge Detect Register - 0x009C */
53 };
54 #else
55 #error "CPU core subversion not defined"
56 #endif
57 
58 #endif /* __MVGPIO_H__ */
59