1 /* 2 * Copyright (C) 2017 Marek Vasut <marek.vasut@gmail.com> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <clk.h> 9 #include <dm.h> 10 #include <errno.h> 11 #include <asm/gpio.h> 12 #include <asm/io.h> 13 #include "../pinctrl/renesas/sh_pfc.h" 14 15 #define GPIO_IOINTSEL 0x00 /* General IO/Interrupt Switching Register */ 16 #define GPIO_INOUTSEL 0x04 /* General Input/Output Switching Register */ 17 #define GPIO_OUTDT 0x08 /* General Output Register */ 18 #define GPIO_INDT 0x0c /* General Input Register */ 19 #define GPIO_INTDT 0x10 /* Interrupt Display Register */ 20 #define GPIO_INTCLR 0x14 /* Interrupt Clear Register */ 21 #define GPIO_INTMSK 0x18 /* Interrupt Mask Register */ 22 #define GPIO_MSKCLR 0x1c /* Interrupt Mask Clear Register */ 23 #define GPIO_POSNEG 0x20 /* Positive/Negative Logic Select Register */ 24 #define GPIO_EDGLEVEL 0x24 /* Edge/level Select Register */ 25 #define GPIO_FILONOFF 0x28 /* Chattering Prevention On/Off Register */ 26 #define GPIO_BOTHEDGE 0x4c /* One Edge/Both Edge Select Register */ 27 28 #define RCAR_MAX_GPIO_PER_BANK 32 29 30 DECLARE_GLOBAL_DATA_PTR; 31 32 struct rcar_gpio_priv { 33 void __iomem *regs; 34 int pfc_offset; 35 }; 36 37 static int rcar_gpio_get_value(struct udevice *dev, unsigned offset) 38 { 39 struct rcar_gpio_priv *priv = dev_get_priv(dev); 40 const u32 bit = BIT(offset); 41 42 /* 43 * Testing on r8a7790 shows that INDT does not show correct pin state 44 * when configured as output, so use OUTDT in case of output pins. 45 */ 46 if (readl(priv->regs + GPIO_INOUTSEL) & bit) 47 return !!(readl(priv->regs + GPIO_OUTDT) & bit); 48 else 49 return !!(readl(priv->regs + GPIO_INDT) & bit); 50 } 51 52 static int rcar_gpio_set_value(struct udevice *dev, unsigned offset, 53 int value) 54 { 55 struct rcar_gpio_priv *priv = dev_get_priv(dev); 56 57 if (value) 58 setbits_le32(priv->regs + GPIO_OUTDT, BIT(offset)); 59 else 60 clrbits_le32(priv->regs + GPIO_OUTDT, BIT(offset)); 61 62 return 0; 63 } 64 65 static void rcar_gpio_set_direction(void __iomem *regs, unsigned offset, 66 bool output) 67 { 68 /* 69 * follow steps in the GPIO documentation for 70 * "Setting General Output Mode" and 71 * "Setting General Input Mode" 72 */ 73 74 /* Configure postive logic in POSNEG */ 75 clrbits_le32(regs + GPIO_POSNEG, BIT(offset)); 76 77 /* Select "General Input/Output Mode" in IOINTSEL */ 78 clrbits_le32(regs + GPIO_IOINTSEL, BIT(offset)); 79 80 /* Select Input Mode or Output Mode in INOUTSEL */ 81 if (output) 82 setbits_le32(regs + GPIO_INOUTSEL, BIT(offset)); 83 else 84 clrbits_le32(regs + GPIO_INOUTSEL, BIT(offset)); 85 } 86 87 static int rcar_gpio_direction_input(struct udevice *dev, unsigned offset) 88 { 89 struct rcar_gpio_priv *priv = dev_get_priv(dev); 90 91 rcar_gpio_set_direction(priv->regs, offset, false); 92 93 return 0; 94 } 95 96 static int rcar_gpio_direction_output(struct udevice *dev, unsigned offset, 97 int value) 98 { 99 struct rcar_gpio_priv *priv = dev_get_priv(dev); 100 101 /* write GPIO value to output before selecting output mode of pin */ 102 rcar_gpio_set_value(dev, offset, value); 103 rcar_gpio_set_direction(priv->regs, offset, true); 104 105 return 0; 106 } 107 108 static int rcar_gpio_get_function(struct udevice *dev, unsigned offset) 109 { 110 struct rcar_gpio_priv *priv = dev_get_priv(dev); 111 112 if (readl(priv->regs + GPIO_INOUTSEL) & BIT(offset)) 113 return GPIOF_OUTPUT; 114 else 115 return GPIOF_INPUT; 116 } 117 118 static int rcar_gpio_request(struct udevice *dev, unsigned offset, 119 const char *label) 120 { 121 struct rcar_gpio_priv *priv = dev_get_priv(dev); 122 struct udevice *pctldev; 123 int ret; 124 125 ret = uclass_get_device(UCLASS_PINCTRL, 0, &pctldev); 126 if (ret) 127 return ret; 128 129 return sh_pfc_config_mux_for_gpio(pctldev, priv->pfc_offset + offset); 130 } 131 132 static const struct dm_gpio_ops rcar_gpio_ops = { 133 .request = rcar_gpio_request, 134 .direction_input = rcar_gpio_direction_input, 135 .direction_output = rcar_gpio_direction_output, 136 .get_value = rcar_gpio_get_value, 137 .set_value = rcar_gpio_set_value, 138 .get_function = rcar_gpio_get_function, 139 }; 140 141 static int rcar_gpio_probe(struct udevice *dev) 142 { 143 struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); 144 struct rcar_gpio_priv *priv = dev_get_priv(dev); 145 struct fdtdec_phandle_args args; 146 struct clk clk; 147 int node = dev_of_offset(dev); 148 int ret; 149 150 priv->regs = (void __iomem *)devfdt_get_addr(dev); 151 uc_priv->bank_name = dev->name; 152 153 ret = fdtdec_parse_phandle_with_args(gd->fdt_blob, node, "gpio-ranges", 154 NULL, 3, 0, &args); 155 priv->pfc_offset = ret == 0 ? args.args[1] : -1; 156 uc_priv->gpio_count = ret == 0 ? args.args[2] : RCAR_MAX_GPIO_PER_BANK; 157 158 ret = clk_get_by_index(dev, 0, &clk); 159 if (ret < 0) { 160 dev_err(dev, "Failed to get GPIO bank clock\n"); 161 return ret; 162 } 163 164 ret = clk_enable(&clk); 165 clk_free(&clk); 166 if (ret) { 167 dev_err(dev, "Failed to enable GPIO bank clock\n"); 168 return ret; 169 } 170 171 return 0; 172 } 173 174 static const struct udevice_id rcar_gpio_ids[] = { 175 { .compatible = "renesas,gpio-r8a7795" }, 176 { .compatible = "renesas,gpio-r8a7796" }, 177 { .compatible = "renesas,gpio-r8a77970" }, 178 { .compatible = "renesas,gpio-r8a77995" }, 179 { .compatible = "renesas,rcar-gen2-gpio" }, 180 { .compatible = "renesas,rcar-gen3-gpio" }, 181 { /* sentinel */ } 182 }; 183 184 U_BOOT_DRIVER(rcar_gpio) = { 185 .name = "rcar-gpio", 186 .id = UCLASS_GPIO, 187 .of_match = rcar_gpio_ids, 188 .ops = &rcar_gpio_ops, 189 .priv_auto_alloc_size = sizeof(struct rcar_gpio_priv), 190 .probe = rcar_gpio_probe, 191 }; 192