xref: /openbmc/u-boot/drivers/gpio/at91_gpio.c (revision 2399e401)
1 /*
2  * Copyright (C) 2013 Bo Shen <voice.shen@atmel.com>
3  *
4  * Copyright (C) 2009 Jens Scharsig (js_at_ng@scharsoft.de)
5  *
6  *  Copyright (C) 2005 HP Labs
7  *
8  * SPDX-License-Identifier:	GPL-2.0+
9  */
10 
11 #include <config.h>
12 #include <common.h>
13 #include <dm.h>
14 #include <asm/io.h>
15 #include <linux/sizes.h>
16 #include <asm/gpio.h>
17 #include <asm/arch/hardware.h>
18 #include <asm/arch/at91_pio.h>
19 
20 #define GPIO_PER_BANK	32
21 
22 static struct at91_port *at91_pio_get_port(unsigned port)
23 {
24 	switch (port) {
25 	case AT91_PIO_PORTA:
26 		return (struct at91_port *)ATMEL_BASE_PIOA;
27 	case AT91_PIO_PORTB:
28 		return (struct at91_port *)ATMEL_BASE_PIOB;
29 	case AT91_PIO_PORTC:
30 		return (struct at91_port *)ATMEL_BASE_PIOC;
31 #if (ATMEL_PIO_PORTS > 3)
32 	case AT91_PIO_PORTD:
33 		return (struct at91_port *)ATMEL_BASE_PIOD;
34 #if (ATMEL_PIO_PORTS > 4)
35 	case AT91_PIO_PORTE:
36 		return (struct at91_port *)ATMEL_BASE_PIOE;
37 #endif
38 #endif
39 	default:
40 		printf("Error: at91_gpio: Fail to get PIO base!\n");
41 		return NULL;
42 	}
43 }
44 
45 static void at91_set_port_pullup(struct at91_port *at91_port, unsigned offset,
46 				 int use_pullup)
47 {
48 	u32 mask;
49 
50 	mask = 1 << offset;
51 	if (use_pullup)
52 		writel(mask, &at91_port->puer);
53 	else
54 		writel(mask, &at91_port->pudr);
55 	writel(mask, &at91_port->per);
56 }
57 
58 int at91_set_pio_pullup(unsigned port, unsigned pin, int use_pullup)
59 {
60 	struct at91_port *at91_port = at91_pio_get_port(port);
61 
62 #if defined(CPU_HAS_PIO3)
63 	if (use_pullup)
64 		at91_set_pio_pulldown(port, pin, 0);
65 #endif
66 
67 	if (at91_port && (pin < GPIO_PER_BANK))
68 		at91_set_port_pullup(at91_port, pin, use_pullup);
69 
70 	return 0;
71 }
72 
73 /*
74  * mux the pin to the "GPIO" peripheral role.
75  */
76 int at91_set_pio_periph(unsigned port, unsigned pin, int use_pullup)
77 {
78 	struct at91_port *at91_port = at91_pio_get_port(port);
79 	u32 mask;
80 
81 	if (at91_port && (pin < GPIO_PER_BANK)) {
82 		mask = 1 << pin;
83 		writel(mask, &at91_port->idr);
84 		at91_set_pio_pullup(port, pin, use_pullup);
85 		writel(mask, &at91_port->per);
86 	}
87 
88 	return 0;
89 }
90 
91 /*
92  * mux the pin to the "A" internal peripheral role.
93  */
94 int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup)
95 {
96 	struct at91_port *at91_port = at91_pio_get_port(port);
97 	u32 mask;
98 
99 	if (at91_port && (pin < GPIO_PER_BANK)) {
100 		mask = 1 << pin;
101 		writel(mask, &at91_port->idr);
102 		at91_set_pio_pullup(port, pin, use_pullup);
103 #if defined(CPU_HAS_PIO3)
104 		writel(readl(&at91_port->abcdsr1) & ~mask,
105 		       &at91_port->abcdsr1);
106 		writel(readl(&at91_port->abcdsr2) & ~mask,
107 		       &at91_port->abcdsr2);
108 #else
109 		writel(mask, &at91_port->asr);
110 #endif
111 		writel(mask, &at91_port->pdr);
112 	}
113 
114 	return 0;
115 }
116 
117 /*
118  * mux the pin to the "B" internal peripheral role.
119  */
120 int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup)
121 {
122 	struct at91_port *at91_port = at91_pio_get_port(port);
123 	u32 mask;
124 
125 	if (at91_port && (pin < GPIO_PER_BANK)) {
126 		mask = 1 << pin;
127 		writel(mask, &at91_port->idr);
128 		at91_set_pio_pullup(port, pin, use_pullup);
129 #if defined(CPU_HAS_PIO3)
130 		writel(readl(&at91_port->abcdsr1) | mask,
131 		       &at91_port->abcdsr1);
132 		writel(readl(&at91_port->abcdsr2) & ~mask,
133 		       &at91_port->abcdsr2);
134 #else
135 		writel(mask, &at91_port->bsr);
136 #endif
137 		writel(mask, &at91_port->pdr);
138 	}
139 
140 	return 0;
141 }
142 
143 #if defined(CPU_HAS_PIO3)
144 /*
145  * mux the pin to the "C" internal peripheral role.
146  */
147 int at91_set_c_periph(unsigned port, unsigned pin, int use_pullup)
148 {
149 	struct at91_port *at91_port = at91_pio_get_port(port);
150 	u32 mask;
151 
152 	if (at91_port && (pin < GPIO_PER_BANK)) {
153 		mask = 1 << pin;
154 		writel(mask, &at91_port->idr);
155 		at91_set_pio_pullup(port, pin, use_pullup);
156 		writel(readl(&at91_port->abcdsr1) & ~mask,
157 		       &at91_port->abcdsr1);
158 		writel(readl(&at91_port->abcdsr2) | mask,
159 		       &at91_port->abcdsr2);
160 		writel(mask, &at91_port->pdr);
161 	}
162 
163 	return 0;
164 }
165 
166 /*
167  * mux the pin to the "D" internal peripheral role.
168  */
169 int at91_set_d_periph(unsigned port, unsigned pin, int use_pullup)
170 {
171 	struct at91_port *at91_port = at91_pio_get_port(port);
172 	u32 mask;
173 
174 	if (at91_port && (pin < GPIO_PER_BANK)) {
175 		mask = 1 << pin;
176 		writel(mask, &at91_port->idr);
177 		at91_set_pio_pullup(port, pin, use_pullup);
178 		writel(readl(&at91_port->abcdsr1) | mask,
179 		       &at91_port->abcdsr1);
180 		writel(readl(&at91_port->abcdsr2) | mask,
181 		       &at91_port->abcdsr2);
182 		writel(mask, &at91_port->pdr);
183 	}
184 
185 	return 0;
186 }
187 #endif
188 
189 #ifdef CONFIG_DM_GPIO
190 static bool at91_get_port_output(struct at91_port *at91_port, int offset)
191 {
192 	u32 mask, val;
193 
194 	mask = 1 << offset;
195 	val = readl(&at91_port->osr);
196 	return val & mask;
197 }
198 #endif
199 
200 static void at91_set_port_input(struct at91_port *at91_port, int offset,
201 				int use_pullup)
202 {
203 	u32 mask;
204 
205 	mask = 1 << offset;
206 	writel(mask, &at91_port->idr);
207 	at91_set_port_pullup(at91_port, offset, use_pullup);
208 	writel(mask, &at91_port->odr);
209 	writel(mask, &at91_port->per);
210 }
211 
212 /*
213  * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
214  * configure it for an input.
215  */
216 int at91_set_pio_input(unsigned port, u32 pin, int use_pullup)
217 {
218 	struct at91_port *at91_port = at91_pio_get_port(port);
219 
220 	if (at91_port && (pin < GPIO_PER_BANK))
221 		at91_set_port_input(at91_port, pin, use_pullup);
222 
223 	return 0;
224 }
225 
226 static void at91_set_port_output(struct at91_port *at91_port, int offset,
227 				 int value)
228 {
229 	u32 mask;
230 
231 	mask = 1 << offset;
232 	writel(mask, &at91_port->idr);
233 	writel(mask, &at91_port->pudr);
234 	if (value)
235 		writel(mask, &at91_port->sodr);
236 	else
237 		writel(mask, &at91_port->codr);
238 	writel(mask, &at91_port->oer);
239 	writel(mask, &at91_port->per);
240 }
241 
242 /*
243  * mux the pin to the gpio controller (instead of "A" or "B" peripheral),
244  * and configure it for an output.
245  */
246 int at91_set_pio_output(unsigned port, u32 pin, int value)
247 {
248 	struct at91_port *at91_port = at91_pio_get_port(port);
249 
250 	if (at91_port && (pin < GPIO_PER_BANK))
251 		at91_set_port_output(at91_port, pin, value);
252 
253 	return 0;
254 }
255 
256 /*
257  * enable/disable the glitch filter. mostly used with IRQ handling.
258  */
259 int at91_set_pio_deglitch(unsigned port, unsigned pin, int is_on)
260 {
261 	struct at91_port *at91_port = at91_pio_get_port(port);
262 	u32 mask;
263 
264 	if (at91_port && (pin < GPIO_PER_BANK)) {
265 		mask = 1 << pin;
266 		if (is_on) {
267 #if defined(CPU_HAS_PIO3)
268 			writel(mask, &at91_port->ifscdr);
269 #endif
270 			writel(mask, &at91_port->ifer);
271 		} else {
272 			writel(mask, &at91_port->ifdr);
273 		}
274 	}
275 
276 	return 0;
277 }
278 
279 #if defined(CPU_HAS_PIO3)
280 /*
281  * enable/disable the debounce filter.
282  */
283 int at91_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div)
284 {
285 	struct at91_port *at91_port = at91_pio_get_port(port);
286 	u32 mask;
287 
288 	if (at91_port && (pin < GPIO_PER_BANK)) {
289 		mask = 1 << pin;
290 		if (is_on) {
291 			writel(mask, &at91_port->ifscer);
292 			writel(div & PIO_SCDR_DIV, &at91_port->scdr);
293 			writel(mask, &at91_port->ifer);
294 		} else {
295 			writel(mask, &at91_port->ifdr);
296 		}
297 	}
298 
299 	return 0;
300 }
301 
302 /*
303  * enable/disable the pull-down.
304  * If pull-up already enabled while calling the function, we disable it.
305  */
306 int at91_set_pio_pulldown(unsigned port, unsigned pin, int is_on)
307 {
308 	struct at91_port *at91_port = at91_pio_get_port(port);
309 	u32 mask;
310 
311 	if (at91_port && (pin < GPIO_PER_BANK)) {
312 		mask = 1 << pin;
313 		if (is_on) {
314 			at91_set_pio_pullup(port, pin, 0);
315 			writel(mask, &at91_port->ppder);
316 		} else
317 			writel(mask, &at91_port->ppddr);
318 	}
319 
320 	return 0;
321 }
322 
323 /*
324  * disable Schmitt trigger
325  */
326 int at91_set_pio_disable_schmitt_trig(unsigned port, unsigned pin)
327 {
328 	struct at91_port *at91_port = at91_pio_get_port(port);
329 	u32 mask;
330 
331 	if (at91_port && (pin < GPIO_PER_BANK)) {
332 		mask = 1 << pin;
333 		writel(readl(&at91_port->schmitt) | mask,
334 		       &at91_port->schmitt);
335 	}
336 
337 	return 0;
338 }
339 #endif
340 
341 /*
342  * enable/disable the multi-driver. This is only valid for output and
343  * allows the output pin to run as an open collector output.
344  */
345 int at91_set_pio_multi_drive(unsigned port, unsigned pin, int is_on)
346 {
347 	struct at91_port *at91_port = at91_pio_get_port(port);
348 	u32 mask;
349 
350 	if (at91_port && (pin < GPIO_PER_BANK)) {
351 		mask = 1 << pin;
352 		if (is_on)
353 			writel(mask, &at91_port->mder);
354 		else
355 			writel(mask, &at91_port->mddr);
356 	}
357 
358 	return 0;
359 }
360 
361 static void at91_set_port_value(struct at91_port *at91_port, int offset,
362 				int value)
363 {
364 	u32 mask;
365 
366 	mask = 1 << offset;
367 	if (value)
368 		writel(mask, &at91_port->sodr);
369 	else
370 		writel(mask, &at91_port->codr);
371 }
372 
373 /*
374  * assuming the pin is muxed as a gpio output, set its value.
375  */
376 int at91_set_pio_value(unsigned port, unsigned pin, int value)
377 {
378 	struct at91_port *at91_port = at91_pio_get_port(port);
379 
380 	if (at91_port && (pin < GPIO_PER_BANK))
381 		at91_set_port_value(at91_port, pin, value);
382 
383 	return 0;
384 }
385 
386 static int at91_get_port_value(struct at91_port *at91_port, int offset)
387 {
388 	u32 pdsr = 0, mask;
389 
390 	mask = 1 << offset;
391 	pdsr = readl(&at91_port->pdsr) & mask;
392 
393 	return pdsr != 0;
394 }
395 /*
396  * read the pin's value (works even if it's not muxed as a gpio).
397  */
398 int at91_get_pio_value(unsigned port, unsigned pin)
399 {
400 	struct at91_port *at91_port = at91_pio_get_port(port);
401 
402 	if (at91_port && (pin < GPIO_PER_BANK))
403 		return at91_get_port_value(at91_port, pin);
404 
405 	return 0;
406 }
407 
408 #ifndef CONFIG_DM_GPIO
409 /* Common GPIO API */
410 
411 int gpio_request(unsigned gpio, const char *label)
412 {
413 	return 0;
414 }
415 
416 int gpio_free(unsigned gpio)
417 {
418 	return 0;
419 }
420 
421 int gpio_direction_input(unsigned gpio)
422 {
423 	at91_set_pio_input(at91_gpio_to_port(gpio),
424 			   at91_gpio_to_pin(gpio), 0);
425 	return 0;
426 }
427 
428 int gpio_direction_output(unsigned gpio, int value)
429 {
430 	at91_set_pio_output(at91_gpio_to_port(gpio),
431 			    at91_gpio_to_pin(gpio), value);
432 	return 0;
433 }
434 
435 int gpio_get_value(unsigned gpio)
436 {
437 	return at91_get_pio_value(at91_gpio_to_port(gpio),
438 				  at91_gpio_to_pin(gpio));
439 }
440 
441 int gpio_set_value(unsigned gpio, int value)
442 {
443 	at91_set_pio_value(at91_gpio_to_port(gpio),
444 			   at91_gpio_to_pin(gpio), value);
445 
446 	return 0;
447 }
448 #endif
449 
450 #ifdef CONFIG_DM_GPIO
451 
452 struct at91_port_priv {
453 	struct at91_port *regs;
454 };
455 
456 /* set GPIO pin 'gpio' as an input */
457 static int at91_gpio_direction_input(struct udevice *dev, unsigned offset)
458 {
459 	struct at91_port_priv *port = dev_get_priv(dev);
460 
461 	at91_set_port_input(port->regs, offset, 0);
462 
463 	return 0;
464 }
465 
466 /* set GPIO pin 'gpio' as an output, with polarity 'value' */
467 static int at91_gpio_direction_output(struct udevice *dev, unsigned offset,
468 				       int value)
469 {
470 	struct at91_port_priv *port = dev_get_priv(dev);
471 
472 	at91_set_port_output(port->regs, offset, value);
473 
474 	return 0;
475 }
476 
477 /* read GPIO IN value of pin 'gpio' */
478 static int at91_gpio_get_value(struct udevice *dev, unsigned offset)
479 {
480 	struct at91_port_priv *port = dev_get_priv(dev);
481 
482 	return at91_get_port_value(port->regs, offset);
483 }
484 
485 /* write GPIO OUT value to pin 'gpio' */
486 static int at91_gpio_set_value(struct udevice *dev, unsigned offset,
487 			       int value)
488 {
489 	struct at91_port_priv *port = dev_get_priv(dev);
490 
491 	at91_set_port_value(port->regs, offset, value);
492 
493 	return 0;
494 }
495 
496 static int at91_gpio_get_function(struct udevice *dev, unsigned offset)
497 {
498 	struct at91_port_priv *port = dev_get_priv(dev);
499 
500 	/* GPIOF_FUNC is not implemented yet */
501 	if (at91_get_port_output(port->regs, offset))
502 		return GPIOF_OUTPUT;
503 	else
504 		return GPIOF_INPUT;
505 }
506 
507 static const struct dm_gpio_ops gpio_at91_ops = {
508 	.direction_input	= at91_gpio_direction_input,
509 	.direction_output	= at91_gpio_direction_output,
510 	.get_value		= at91_gpio_get_value,
511 	.set_value		= at91_gpio_set_value,
512 	.get_function		= at91_gpio_get_function,
513 };
514 
515 static int at91_gpio_probe(struct udevice *dev)
516 {
517 	struct at91_port_priv *port = dev_get_priv(dev);
518 	struct at91_port_platdata *plat = dev_get_platdata(dev);
519 	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
520 
521 	uc_priv->bank_name = plat->bank_name;
522 	uc_priv->gpio_count = GPIO_PER_BANK;
523 	port->regs = (struct at91_port *)plat->base_addr;
524 
525 	return 0;
526 }
527 
528 U_BOOT_DRIVER(gpio_at91) = {
529 	.name	= "gpio_at91",
530 	.id	= UCLASS_GPIO,
531 	.ops	= &gpio_at91_ops,
532 	.probe	= at91_gpio_probe,
533 	.priv_auto_alloc_size = sizeof(struct at91_port_priv),
534 };
535 #endif
536