xref: /openbmc/u-boot/drivers/gpio/Kconfig (revision dc146ca1) 
1#
2# GPIO infrastructure and drivers
3#
4
5menu "GPIO Support"
6
7config DM_GPIO
8	bool "Enable Driver Model for GPIO drivers"
9	depends on DM
10	help
11	  Enable driver model for GPIO access. The standard GPIO
12	  interface (gpio_get_value(), etc.) is then implemented by
13	  the GPIO uclass. Drivers provide methods to query the
14	  particular GPIOs that they provide. The uclass interface
15	  is defined in include/asm-generic/gpio.h.
16
17config ALTERA_PIO
18	bool "Altera PIO driver"
19	depends on DM_GPIO
20	help
21	  Select this to enable PIO for Altera devices. Please find
22	  details on the "Embedded Peripherals IP User Guide" of Altera.
23
24config BCM6345_GPIO
25	bool "BCM6345 GPIO driver"
26	depends on DM_GPIO && ARCH_BMIPS
27	help
28	  This driver supports the GPIO banks on BCM6345 SoCs.
29
30config DWAPB_GPIO
31	bool "DWAPB GPIO driver"
32	depends on DM && DM_GPIO
33	default n
34	help
35	  Support for the Designware APB GPIO driver.
36
37config AT91_GPIO
38	bool "AT91 PIO GPIO driver"
39	depends on DM_GPIO
40	default n
41	help
42	  Say yes here to select AT91 PIO GPIO driver. AT91 PIO
43	  controller manages up to 32 fully programmable input/output
44	  lines. Each I/O line may be dedicated as a general-purpose
45	  I/O or be assigned to a function of an embedded peripheral.
46	  The assignment to a function of an embedded peripheral is
47	  the responsibility of AT91 Pinctrl driver. This driver is
48	  responsible for the general-purpose I/O.
49
50config ATMEL_PIO4
51	bool "ATMEL PIO4 driver"
52	depends on DM_GPIO
53	default n
54	help
55	  Say yes here to support the Atmel PIO4 driver.
56	  The PIO4 is new version of Atmel PIO controller, which manages
57	  up to 128 fully programmable input/output lines. Each I/O line
58	  may be dedicated as a general purpose I/O or be assigned to
59	  a function of an embedded peripheral.
60
61config DA8XX_GPIO
62	bool "DA8xx GPIO Driver"
63	help
64	  This driver supports the DA8xx GPIO controller
65
66config INTEL_BROADWELL_GPIO
67	bool "Intel Broadwell GPIO driver"
68	depends on DM
69	help
70	  This driver supports Broadwell U devices which have an expanded
71	  GPIO feature set. The difference is large enough to merit a separate
72	  driver from the common Intel ICH6 driver. It supports a total of
73	  95 GPIOs which can be configured from the device tree.
74
75config INTEL_ICH6_GPIO
76	bool "Intel ICH6 compatible legacy GPIO driver"
77	depends on DM_GPIO
78	help
79	  Say yes here to select Intel ICH6 compatible legacy GPIO driver.
80
81config IMX_RGPIO2P
82	bool "i.MX7ULP RGPIO2P driver"
83	depends on DM
84	default n
85	help
86	  This driver supports i.MX7ULP Rapid GPIO2P controller.
87
88config HSDK_CREG_GPIO
89	bool "HSDK CREG GPIO griver"
90	depends on DM_GPIO
91	default n
92	help
93	  This driver supports CREG GPIOs on Synopsys HSDK SOC.
94
95config LPC32XX_GPIO
96	bool "LPC32XX GPIO driver"
97	depends on DM
98	default n
99	help
100	  Support for the LPC32XX GPIO driver.
101
102config MSCC_SGPIO
103	bool "Microsemi Serial GPIO driver"
104	depends on DM_GPIO && SOC_VCOREIII
105	help
106	  Support for the VCoreIII SoC serial GPIO device. By using a
107          serial interface, the SIO controller significantly extends
108          the number of available GPIOs with a minimum number of
109          additional pins on the device. The primary purpose of the
110          SIO controller is to connect control signals from SFP
111          modules and to act as an LED controller.
112
113config MSM_GPIO
114	bool "Qualcomm GPIO driver"
115	depends on DM_GPIO
116	default n
117	help
118	  Support GPIO controllers on Qualcomm Snapdragon family of SoCs.
119	  This controller have single bank (default name "soc"), every
120	  gpio has it's own set of registers.
121	  Only simple GPIO operations are supported (get/set, change of
122	  direction and checking pin function).
123	  Supported devices:
124	  - APQ8016
125	  - MSM8916
126
127config MXC_GPIO
128	bool "Freescale/NXP MXC GPIO driver"
129	help
130	  Support GPIO controllers on various i.MX platforms
131
132config OMAP_GPIO
133	bool "TI OMAP GPIO driver"
134	depends on ARCH_OMAP2PLUS
135	default y
136	help
137	  Support GPIO controllers on the TI OMAP3/4/5 and related (such as
138	  AM335x/AM43xx/AM57xx/DRA7xx/etc) families of SoCs.
139
140config CMD_PCA953X
141	bool "Enable the pca953x command"
142	help
143	  Deprecated: This should be converted to driver model.
144
145	  This command provides access to a pca953x GPIO device using the
146	  legacy GPIO interface. Several subcommands are provided which mirror
147	  the standard 'gpio' command. It should use that instead.
148
149config PM8916_GPIO
150	bool "Qualcomm PM8916 PMIC GPIO/keypad driver"
151	depends on DM_GPIO && PMIC_PM8916
152	help
153	  Support for GPIO pins and power/reset buttons found on
154	  Qualcomm PM8916 PMIC.
155	  Default name for GPIO bank is "pm8916".
156	  Power and reset buttons are placed in "pm8916_key" bank and
157          have gpio numbers 0 and 1 respectively.
158
159config PCF8575_GPIO
160	bool "PCF8575 I2C GPIO Expander driver"
161	depends on DM_GPIO && DM_I2C
162	help
163	 Support for PCF8575 I2C 16-bit GPIO expander. Most of these
164	 chips are from NXP and TI.
165
166config RCAR_GPIO
167	bool "Renesas RCar GPIO driver"
168	depends on DM_GPIO && ARCH_RMOBILE
169	help
170	  This driver supports the GPIO banks on Renesas RCar SoCs.
171
172config ROCKCHIP_GPIO
173	bool "Rockchip GPIO driver"
174	depends on DM_GPIO
175	help
176	  Support GPIO access on Rockchip SoCs. The GPIOs are arranged into
177	  a number of banks (different for each SoC type) each with 32 GPIOs.
178	  The GPIOs for a device are defined in the device tree with one node
179	  for each bank.
180
181config SANDBOX_GPIO
182	bool "Enable sandbox GPIO driver"
183	depends on SANDBOX && DM && DM_GPIO
184	help
185	  This driver supports some simulated GPIOs which can be adjusted
186	  using 'back door' functions like sandbox_gpio_set_value(). Then the
187	  GPIOs can be inspected through the normal get_get_value()
188	  interface. The purpose of this is to allow GPIOs to be used as
189	  normal in sandbox, perhaps with test code actually driving the
190	  behaviour of those GPIOs.
191
192config SANDBOX_GPIO_COUNT
193	int "Number of sandbox GPIOs"
194	depends on SANDBOX_GPIO
195	default 128
196	help
197	  The sandbox driver can support any number of GPIOs. Generally these
198	  are specified using the device tree. But you can also have a number
199	  of 'anonymous' GPIOs that do not belong to any device or bank.
200	  Select a suitable value depending on your needs.
201
202config XILINX_GPIO
203	bool "Xilinx GPIO driver"
204	depends on DM_GPIO
205	help
206	  This config enable the Xilinx GPIO driver for Microblaze.
207
208config CMD_TCA642X
209	bool "tca642x - Command to access tca642x state"
210	help
211	  DEPRECATED - This needs conversion to driver model
212
213	  This provides a way to looking at the pin state of this device.
214	  This mirrors the 'gpio' command and that should be used in preference
215	  to custom code.
216
217config TEGRA_GPIO
218	bool "Tegra20..210 GPIO driver"
219	depends on DM_GPIO
220	help
221	  Support for the GPIO controller contained in NVIDIA Tegra20 through
222	  Tegra210.
223
224config TEGRA186_GPIO
225	bool "Tegra186 GPIO driver"
226	depends on DM_GPIO
227	help
228	  Support for the GPIO controller contained in NVIDIA Tegra186. This
229	  covers both the "main" and "AON" controller instances, even though
230	  they have slightly different register layout.
231
232config GPIO_UNIPHIER
233	bool "UniPhier GPIO"
234	depends on ARCH_UNIPHIER
235	help
236	  Say yes here to support UniPhier GPIOs.
237
238config VYBRID_GPIO
239	bool "Vybrid GPIO driver"
240	depends on DM
241	default n
242	help
243	  Say yes here to support Vybrid vf610 GPIOs.
244
245config PIC32_GPIO
246	bool "Microchip PIC32 GPIO driver"
247	depends on DM_GPIO && MACH_PIC32
248	default y
249	help
250	  Say yes here to support Microchip PIC32 GPIOs.
251
252config STM32F7_GPIO
253	bool "ST STM32 GPIO driver"
254	depends on DM_GPIO && (STM32 || ARCH_STM32MP)
255	default y
256	help
257	  Device model driver support for STM32 GPIO controller. It should be
258	  usable on many stm32 families like stm32f4 & stm32H7.
259	  Tested on STM32F7.
260
261config MVEBU_GPIO
262	bool "Marvell MVEBU GPIO driver"
263	depends on DM_GPIO && ARCH_MVEBU
264	default y
265	help
266	  Say yes here to support Marvell MVEBU (Armada XP/38x) GPIOs.
267
268config ZYNQ_GPIO
269	bool "Zynq GPIO driver"
270	depends on DM_GPIO && (ARCH_ZYNQ || ARCH_ZYNQMP)
271	default y
272	help
273	  Supports GPIO access on Zynq SoC.
274
275config DM_74X164
276	bool "74x164 serial-in/parallel-out 8-bits shift register"
277	depends on DM_GPIO
278	help
279	  Driver for 74x164 compatible serial-in/parallel-out 8-outputs
280	  shift registers, such as 74lv165, 74hc595.
281	  This driver can be used to provide access to more gpio outputs.
282
283config DM_PCA953X
284	bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
285	depends on DM_GPIO
286	help
287	  Say yes here to provide access to several register-oriented
288	  SMBus I/O expanders, made mostly by NXP or TI.  Compatible
289	  models include:
290
291	  4 bits:	pca9536, pca9537
292
293	  8 bits:	max7310, max7315, pca6107, pca9534, pca9538, pca9554,
294			pca9556, pca9557, pca9574, tca6408, xra1202
295
296	  16 bits:	max7312, max7313, pca9535, pca9539, pca9555, pca9575,
297			tca6416
298
299	  24 bits:	tca6424
300
301	  40 bits:	pca9505, pca9698
302
303	  Now, max 24 bits chips and PCA953X compatible chips are
304	  supported
305
306config SPL_DM_PCA953X
307	bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports in SPL"
308	depends on DM_GPIO
309	help
310	  Say yes here to provide access to several register-oriented
311	  SMBus I/O expanders, made mostly by NXP or TI.  Compatible
312	  models include:
313
314	  4 bits:	pca9536, pca9537
315
316	  8 bits:	max7310, max7315, pca6107, pca9534, pca9538, pca9554,
317			pca9556, pca9557, pca9574, tca6408, xra1202
318
319	  16 bits:	max7312, max7313, pca9535, pca9539, pca9555, pca9575,
320			tca6416
321
322	  24 bits:	tca6424
323
324	  40 bits:	pca9505, pca9698
325
326	  Now, max 24 bits chips and PCA953X compatible chips are
327	  supported
328
329config MPC8XXX_GPIO
330	bool "Freescale MPC8XXX GPIO driver"
331	depends on DM_GPIO
332	help
333	  This driver supports the built-in GPIO controller of MPC8XXX CPUs.
334	  Each GPIO bank is identified by its own entry in the device tree,
335	  i.e.
336
337	  gpio-controller@fc00 {
338		#gpio-cells = <2>;
339		compatible = "fsl,pq3-gpio";
340		reg = <0xfc00 0x100>
341	  }
342
343	  By default, each bank is assumed to have 32 GPIOs, but the ngpios
344	  setting is honored, so the number of GPIOs for each bank is
345	  configurable to match the actual GPIO count of the SoC (e.g. the
346	  32/32/23 banks of the P1022 SoC).
347
348	  Aside from the standard functions of input/output mode, and output
349	  value setting, the open-drain feature, which can configure individual
350	  GPIOs to work as open-drain outputs, is supported.
351
352config MT7621_GPIO
353	bool "MediaTek MT7621 GPIO driver"
354	depends on DM_GPIO && ARCH_MT7620
355	default y
356	help
357	  Say yes here to support MediaTek MT7621 compatible GPIOs.
358
359endmenu
360