xref: /openbmc/u-boot/drivers/gpio/Kconfig (revision 868bbcc3) 
1#
2# GPIO infrastructure and drivers
3#
4
5menu "GPIO Support"
6
7config DM_GPIO
8	bool "Enable Driver Model for GPIO drivers"
9	depends on DM
10	help
11	  Enable driver model for GPIO access. The standard GPIO
12	  interface (gpio_get_value(), etc.) is then implemented by
13	  the GPIO uclass. Drivers provide methods to query the
14	  particular GPIOs that they provide. The uclass interface
15	  is defined in include/asm-generic/gpio.h.
16
17config ALTERA_PIO
18	bool "Altera PIO driver"
19	depends on DM_GPIO
20	help
21	  Select this to enable PIO for Altera devices. Please find
22	  details on the "Embedded Peripherals IP User Guide" of Altera.
23
24config BCM6345_GPIO
25	bool "BCM6345 GPIO driver"
26	depends on DM_GPIO && ARCH_BMIPS
27	help
28	  This driver supports the GPIO banks on BCM6345 SoCs.
29
30config DWAPB_GPIO
31	bool "DWAPB GPIO driver"
32	depends on DM && DM_GPIO
33	default n
34	help
35	  Support for the Designware APB GPIO driver.
36
37config AT91_GPIO
38	bool "AT91 PIO GPIO driver"
39	depends on DM_GPIO
40	default n
41	help
42	  Say yes here to select AT91 PIO GPIO driver. AT91 PIO
43	  controller manages up to 32 fully programmable input/output
44	  lines. Each I/O line may be dedicated as a general-purpose
45	  I/O or be assigned to a function of an embedded peripheral.
46	  The assignment to a function of an embedded peripheral is
47	  the responsibility of AT91 Pinctrl driver. This driver is
48	  responsible for the general-purpose I/O.
49
50config ATMEL_PIO4
51	bool "ATMEL PIO4 driver"
52	depends on DM_GPIO
53	default n
54	help
55	  Say yes here to support the Atmel PIO4 driver.
56	  The PIO4 is new version of Atmel PIO controller, which manages
57	  up to 128 fully programmable input/output lines. Each I/O line
58	  may be dedicated as a general purpose I/O or be assigned to
59	  a function of an embedded peripheral.
60
61config ASPEED_GPIO
62	bool "Aspeed GPIO Driver"
63	help
64	  This driver supports the Aspeed GPIO controller
65
66config DA8XX_GPIO
67	bool "DA8xx GPIO Driver"
68	help
69	  This driver supports the DA8xx GPIO controller
70
71config INTEL_BROADWELL_GPIO
72	bool "Intel Broadwell GPIO driver"
73	depends on DM
74	help
75	  This driver supports Broadwell U devices which have an expanded
76	  GPIO feature set. The difference is large enough to merit a separate
77	  driver from the common Intel ICH6 driver. It supports a total of
78	  95 GPIOs which can be configured from the device tree.
79
80config INTEL_ICH6_GPIO
81	bool "Intel ICH6 compatible legacy GPIO driver"
82	depends on DM_GPIO
83	help
84	  Say yes here to select Intel ICH6 compatible legacy GPIO driver.
85
86config IMX_RGPIO2P
87	bool "i.MX7ULP RGPIO2P driver"
88	depends on DM
89	default n
90	help
91	  This driver supports i.MX7ULP Rapid GPIO2P controller.
92
93config HSDK_CREG_GPIO
94	bool "HSDK CREG GPIO griver"
95	depends on DM_GPIO
96	default n
97	help
98	  This driver supports CREG GPIOs on Synopsys HSDK SOC.
99
100config LPC32XX_GPIO
101	bool "LPC32XX GPIO driver"
102	depends on DM
103	default n
104	help
105	  Support for the LPC32XX GPIO driver.
106
107config MSCC_SGPIO
108	bool "Microsemi Serial GPIO driver"
109	depends on DM_GPIO && SOC_VCOREIII
110	help
111	  Support for the VCoreIII SoC serial GPIO device. By using a
112          serial interface, the SIO controller significantly extends
113          the number of available GPIOs with a minimum number of
114          additional pins on the device. The primary purpose of the
115          SIO controller is to connect control signals from SFP
116          modules and to act as an LED controller.
117
118config MSM_GPIO
119	bool "Qualcomm GPIO driver"
120	depends on DM_GPIO
121	default n
122	help
123	  Support GPIO controllers on Qualcomm Snapdragon family of SoCs.
124	  This controller have single bank (default name "soc"), every
125	  gpio has it's own set of registers.
126	  Only simple GPIO operations are supported (get/set, change of
127	  direction and checking pin function).
128	  Supported devices:
129	  - APQ8016
130	  - MSM8916
131
132config MXC_GPIO
133	bool "Freescale/NXP MXC GPIO driver"
134	help
135	  Support GPIO controllers on various i.MX platforms
136
137config OMAP_GPIO
138	bool "TI OMAP GPIO driver"
139	depends on ARCH_OMAP2PLUS
140	default y
141	help
142	  Support GPIO controllers on the TI OMAP3/4/5 and related (such as
143	  AM335x/AM43xx/AM57xx/DRA7xx/etc) families of SoCs.
144
145config CMD_PCA953X
146	bool "Enable the pca953x command"
147	help
148	  Deprecated: This should be converted to driver model.
149
150	  This command provides access to a pca953x GPIO device using the
151	  legacy GPIO interface. Several subcommands are provided which mirror
152	  the standard 'gpio' command. It should use that instead.
153
154config PM8916_GPIO
155	bool "Qualcomm PM8916 PMIC GPIO/keypad driver"
156	depends on DM_GPIO && PMIC_PM8916
157	help
158	  Support for GPIO pins and power/reset buttons found on
159	  Qualcomm PM8916 PMIC.
160	  Default name for GPIO bank is "pm8916".
161	  Power and reset buttons are placed in "pm8916_key" bank and
162          have gpio numbers 0 and 1 respectively.
163
164config PCF8575_GPIO
165	bool "PCF8575 I2C GPIO Expander driver"
166	depends on DM_GPIO && DM_I2C
167	help
168	 Support for PCF8575 I2C 16-bit GPIO expander. Most of these
169	 chips are from NXP and TI.
170
171config RCAR_GPIO
172	bool "Renesas RCar GPIO driver"
173	depends on DM_GPIO && ARCH_RMOBILE
174	help
175	  This driver supports the GPIO banks on Renesas RCar SoCs.
176
177config ROCKCHIP_GPIO
178	bool "Rockchip GPIO driver"
179	depends on DM_GPIO
180	help
181	  Support GPIO access on Rockchip SoCs. The GPIOs are arranged into
182	  a number of banks (different for each SoC type) each with 32 GPIOs.
183	  The GPIOs for a device are defined in the device tree with one node
184	  for each bank.
185
186config SANDBOX_GPIO
187	bool "Enable sandbox GPIO driver"
188	depends on SANDBOX && DM && DM_GPIO
189	help
190	  This driver supports some simulated GPIOs which can be adjusted
191	  using 'back door' functions like sandbox_gpio_set_value(). Then the
192	  GPIOs can be inspected through the normal get_get_value()
193	  interface. The purpose of this is to allow GPIOs to be used as
194	  normal in sandbox, perhaps with test code actually driving the
195	  behaviour of those GPIOs.
196
197config SANDBOX_GPIO_COUNT
198	int "Number of sandbox GPIOs"
199	depends on SANDBOX_GPIO
200	default 128
201	help
202	  The sandbox driver can support any number of GPIOs. Generally these
203	  are specified using the device tree. But you can also have a number
204	  of 'anonymous' GPIOs that do not belong to any device or bank.
205	  Select a suitable value depending on your needs.
206
207config XILINX_GPIO
208	bool "Xilinx GPIO driver"
209	depends on DM_GPIO
210	help
211	  This config enable the Xilinx GPIO driver for Microblaze.
212
213config CMD_TCA642X
214	bool "tca642x - Command to access tca642x state"
215	help
216	  DEPRECATED - This needs conversion to driver model
217
218	  This provides a way to looking at the pin state of this device.
219	  This mirrors the 'gpio' command and that should be used in preference
220	  to custom code.
221
222config TEGRA_GPIO
223	bool "Tegra20..210 GPIO driver"
224	depends on DM_GPIO
225	help
226	  Support for the GPIO controller contained in NVIDIA Tegra20 through
227	  Tegra210.
228
229config TEGRA186_GPIO
230	bool "Tegra186 GPIO driver"
231	depends on DM_GPIO
232	help
233	  Support for the GPIO controller contained in NVIDIA Tegra186. This
234	  covers both the "main" and "AON" controller instances, even though
235	  they have slightly different register layout.
236
237config GPIO_UNIPHIER
238	bool "UniPhier GPIO"
239	depends on ARCH_UNIPHIER
240	help
241	  Say yes here to support UniPhier GPIOs.
242
243config VYBRID_GPIO
244	bool "Vybrid GPIO driver"
245	depends on DM
246	default n
247	help
248	  Say yes here to support Vybrid vf610 GPIOs.
249
250config PIC32_GPIO
251	bool "Microchip PIC32 GPIO driver"
252	depends on DM_GPIO && MACH_PIC32
253	default y
254	help
255	  Say yes here to support Microchip PIC32 GPIOs.
256
257config STM32F7_GPIO
258	bool "ST STM32 GPIO driver"
259	depends on DM_GPIO && (STM32 || ARCH_STM32MP)
260	default y
261	help
262	  Device model driver support for STM32 GPIO controller. It should be
263	  usable on many stm32 families like stm32f4 & stm32H7.
264	  Tested on STM32F7.
265
266config MVEBU_GPIO
267	bool "Marvell MVEBU GPIO driver"
268	depends on DM_GPIO && ARCH_MVEBU
269	default y
270	help
271	  Say yes here to support Marvell MVEBU (Armada XP/38x) GPIOs.
272
273config ZYNQ_GPIO
274	bool "Zynq GPIO driver"
275	depends on DM_GPIO && (ARCH_ZYNQ || ARCH_ZYNQMP)
276	default y
277	help
278	  Supports GPIO access on Zynq SoC.
279
280config DM_74X164
281	bool "74x164 serial-in/parallel-out 8-bits shift register"
282	depends on DM_GPIO
283	help
284	  Driver for 74x164 compatible serial-in/parallel-out 8-outputs
285	  shift registers, such as 74lv165, 74hc595.
286	  This driver can be used to provide access to more gpio outputs.
287
288config DM_PCA953X
289	bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
290	depends on DM_GPIO
291	help
292	  Say yes here to provide access to several register-oriented
293	  SMBus I/O expanders, made mostly by NXP or TI.  Compatible
294	  models include:
295
296	  4 bits:	pca9536, pca9537
297
298	  8 bits:	max7310, max7315, pca6107, pca9534, pca9538, pca9554,
299			pca9556, pca9557, pca9574, tca6408, xra1202
300
301	  16 bits:	max7312, max7313, pca9535, pca9539, pca9555, pca9575,
302			tca6416
303
304	  24 bits:	tca6424
305
306	  40 bits:	pca9505, pca9698
307
308	  Now, max 24 bits chips and PCA953X compatible chips are
309	  supported
310
311config SPL_DM_PCA953X
312	bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports in SPL"
313	depends on DM_GPIO
314	help
315	  Say yes here to provide access to several register-oriented
316	  SMBus I/O expanders, made mostly by NXP or TI.  Compatible
317	  models include:
318
319	  4 bits:	pca9536, pca9537
320
321	  8 bits:	max7310, max7315, pca6107, pca9534, pca9538, pca9554,
322			pca9556, pca9557, pca9574, tca6408, xra1202
323
324	  16 bits:	max7312, max7313, pca9535, pca9539, pca9555, pca9575,
325			tca6416
326
327	  24 bits:	tca6424
328
329	  40 bits:	pca9505, pca9698
330
331	  Now, max 24 bits chips and PCA953X compatible chips are
332	  supported
333
334config MPC8XXX_GPIO
335	bool "Freescale MPC8XXX GPIO driver"
336	depends on DM_GPIO
337	help
338	  This driver supports the built-in GPIO controller of MPC8XXX CPUs.
339	  Each GPIO bank is identified by its own entry in the device tree,
340	  i.e.
341
342	  gpio-controller@fc00 {
343		#gpio-cells = <2>;
344		compatible = "fsl,pq3-gpio";
345		reg = <0xfc00 0x100>
346	  }
347
348	  By default, each bank is assumed to have 32 GPIOs, but the ngpios
349	  setting is honored, so the number of GPIOs for each bank is
350	  configurable to match the actual GPIO count of the SoC (e.g. the
351	  32/32/23 banks of the P1022 SoC).
352
353	  Aside from the standard functions of input/output mode, and output
354	  value setting, the open-drain feature, which can configure individual
355	  GPIOs to work as open-drain outputs, is supported.
356
357config MT7621_GPIO
358	bool "MediaTek MT7621 GPIO driver"
359	depends on DM_GPIO && ARCH_MT7620
360	default y
361	help
362	  Say yes here to support MediaTek MT7621 compatible GPIOs.
363
364endmenu
365