xref: /openbmc/u-boot/drivers/gpio/Kconfig (revision 5d653afc) 
1#
2# GPIO infrastructure and drivers
3#
4
5menu "GPIO Support"
6
7config DM_GPIO
8	bool "Enable Driver Model for GPIO drivers"
9	depends on DM
10	help
11	  Enable driver model for GPIO access. The standard GPIO
12	  interface (gpio_get_value(), etc.) is then implemented by
13	  the GPIO uclass. Drivers provide methods to query the
14	  particular GPIOs that they provide. The uclass interface
15	  is defined in include/asm-generic/gpio.h.
16
17config ALTERA_PIO
18	bool "Altera PIO driver"
19	depends on DM_GPIO
20	help
21	  Select this to enable PIO for Altera devices. Please find
22	  details on the "Embedded Peripherals IP User Guide" of Altera.
23
24config BCM6345_GPIO
25	bool "BCM6345 GPIO driver"
26	depends on DM_GPIO && ARCH_BMIPS
27	help
28	  This driver supports the GPIO banks on BCM6345 SoCs.
29
30config DWAPB_GPIO
31	bool "DWAPB GPIO driver"
32	depends on DM && DM_GPIO
33	default n
34	help
35	  Support for the Designware APB GPIO driver.
36
37config AT91_GPIO
38	bool "AT91 PIO GPIO driver"
39	depends on DM_GPIO
40	default n
41	help
42	  Say yes here to select AT91 PIO GPIO driver. AT91 PIO
43	  controller manages up to 32 fully programmable input/output
44	  lines. Each I/O line may be dedicated as a general-purpose
45	  I/O or be assigned to a function of an embedded peripheral.
46	  The assignment to a function of an embedded peripheral is
47	  the responsibility of AT91 Pinctrl driver. This driver is
48	  responsible for the general-purpose I/O.
49
50config ATMEL_PIO4
51	bool "ATMEL PIO4 driver"
52	depends on DM_GPIO
53	default n
54	help
55	  Say yes here to support the Atmel PIO4 driver.
56	  The PIO4 is new version of Atmel PIO controller, which manages
57	  up to 128 fully programmable input/output lines. Each I/O line
58	  may be dedicated as a general purpose I/O or be assigned to
59	  a function of an embedded peripheral.
60
61config DA8XX_GPIO
62	bool "DA8xx GPIO Driver"
63	help
64	  This driver supports the DA8xx GPIO controller
65
66config INTEL_BROADWELL_GPIO
67	bool "Intel Broadwell GPIO driver"
68	depends on DM
69	help
70	  This driver supports Broadwell U devices which have an expanded
71	  GPIO feature set. The difference is large enough to merit a separate
72	  driver from the common Intel ICH6 driver. It supports a total of
73	  95 GPIOs which can be configured from the device tree.
74
75config INTEL_ICH6_GPIO
76	bool "Intel ICH6 compatible legacy GPIO driver"
77	depends on DM_GPIO
78	help
79	  Say yes here to select Intel ICH6 compatible legacy GPIO driver.
80
81config IMX_RGPIO2P
82	bool "i.MX7ULP RGPIO2P driver"
83	depends on DM
84	default n
85	help
86	  This driver supports i.MX7ULP Rapid GPIO2P controller.
87
88config HSDK_CREG_GPIO
89	bool "HSDK CREG GPIO griver"
90	depends on DM_GPIO
91	default n
92	help
93	  This driver supports CREG GPIOs on Synopsys HSDK SOC.
94
95config LPC32XX_GPIO
96	bool "LPC32XX GPIO driver"
97	depends on DM
98	default n
99	help
100	  Support for the LPC32XX GPIO driver.
101
102config MSM_GPIO
103	bool "Qualcomm GPIO driver"
104	depends on DM_GPIO
105	default n
106	help
107	  Support GPIO controllers on Qualcomm Snapdragon family of SoCs.
108	  This controller have single bank (default name "soc"), every
109	  gpio has it's own set of registers.
110	  Only simple GPIO operations are supported (get/set, change of
111	  direction and checking pin function).
112	  Supported devices:
113	  - APQ8016
114	  - MSM8916
115
116config MXC_GPIO
117	bool "Freescale/NXP MXC GPIO driver"
118	help
119	  Support GPIO controllers on various i.MX platforms
120
121config OMAP_GPIO
122	bool "TI OMAP GPIO driver"
123	depends on ARCH_OMAP2PLUS
124	default y
125	help
126	  Support GPIO controllers on the TI OMAP3/4/5 and related (such as
127	  AM335x/AM43xx/AM57xx/DRA7xx/etc) families of SoCs.
128
129config CMD_PCA953X
130	bool "Enable the pca953x command"
131	help
132	  Deprecated: This should be converted to driver model.
133
134	  This command provides access to a pca953x GPIO device using the
135	  legacy GPIO interface. Several subcommands are provided which mirror
136	  the standard 'gpio' command. It should use that instead.
137
138config PM8916_GPIO
139	bool "Qualcomm PM8916 PMIC GPIO/keypad driver"
140	depends on DM_GPIO && PMIC_PM8916
141	help
142	  Support for GPIO pins and power/reset buttons found on
143	  Qualcomm PM8916 PMIC.
144	  Default name for GPIO bank is "pm8916".
145	  Power and reset buttons are placed in "pm8916_key" bank and
146          have gpio numbers 0 and 1 respectively.
147
148config PCF8575_GPIO
149	bool "PCF8575 I2C GPIO Expander driver"
150	depends on DM_GPIO && DM_I2C
151	help
152	 Support for PCF8575 I2C 16-bit GPIO expander. Most of these
153	 chips are from NXP and TI.
154
155config RCAR_GPIO
156	bool "Renesas RCar GPIO driver"
157	depends on DM_GPIO && ARCH_RMOBILE
158	help
159	  This driver supports the GPIO banks on Renesas RCar SoCs.
160
161config ROCKCHIP_GPIO
162	bool "Rockchip GPIO driver"
163	depends on DM_GPIO
164	help
165	  Support GPIO access on Rockchip SoCs. The GPIOs are arranged into
166	  a number of banks (different for each SoC type) each with 32 GPIOs.
167	  The GPIOs for a device are defined in the device tree with one node
168	  for each bank.
169
170config SANDBOX_GPIO
171	bool "Enable sandbox GPIO driver"
172	depends on SANDBOX && DM && DM_GPIO
173	help
174	  This driver supports some simulated GPIOs which can be adjusted
175	  using 'back door' functions like sandbox_gpio_set_value(). Then the
176	  GPIOs can be inspected through the normal get_get_value()
177	  interface. The purpose of this is to allow GPIOs to be used as
178	  normal in sandbox, perhaps with test code actually driving the
179	  behaviour of those GPIOs.
180
181config SANDBOX_GPIO_COUNT
182	int "Number of sandbox GPIOs"
183	depends on SANDBOX_GPIO
184	default 128
185	help
186	  The sandbox driver can support any number of GPIOs. Generally these
187	  are specified using the device tree. But you can also have a number
188	  of 'anonymous' GPIOs that do not belong to any device or bank.
189	  Select a suitable value depending on your needs.
190
191config XILINX_GPIO
192	bool "Xilinx GPIO driver"
193	depends on DM_GPIO
194	help
195	  This config enable the Xilinx GPIO driver for Microblaze.
196
197config CMD_TCA642X
198	bool "tca642x - Command to access tca642x state"
199	help
200	  DEPRECATED - This needs conversion to driver model
201
202	  This provides a way to looking at the pin state of this device.
203	  This mirrors the 'gpio' command and that should be used in preference
204	  to custom code.
205
206config TEGRA_GPIO
207	bool "Tegra20..210 GPIO driver"
208	depends on DM_GPIO
209	help
210	  Support for the GPIO controller contained in NVIDIA Tegra20 through
211	  Tegra210.
212
213config TEGRA186_GPIO
214	bool "Tegra186 GPIO driver"
215	depends on DM_GPIO
216	help
217	  Support for the GPIO controller contained in NVIDIA Tegra186. This
218	  covers both the "main" and "AON" controller instances, even though
219	  they have slightly different register layout.
220
221config GPIO_UNIPHIER
222	bool "UniPhier GPIO"
223	depends on ARCH_UNIPHIER
224	help
225	  Say yes here to support UniPhier GPIOs.
226
227config VYBRID_GPIO
228	bool "Vybrid GPIO driver"
229	depends on DM
230	default n
231	help
232	  Say yes here to support Vybrid vf610 GPIOs.
233
234config PIC32_GPIO
235	bool "Microchip PIC32 GPIO driver"
236	depends on DM_GPIO && MACH_PIC32
237	default y
238	help
239	  Say yes here to support Microchip PIC32 GPIOs.
240
241config STM32F7_GPIO
242	bool "ST STM32 GPIO driver"
243	depends on DM_GPIO && (STM32 || ARCH_STM32MP)
244	default y
245	help
246	  Device model driver support for STM32 GPIO controller. It should be
247	  usable on many stm32 families like stm32f4 & stm32H7.
248	  Tested on STM32F7.
249
250config MVEBU_GPIO
251	bool "Marvell MVEBU GPIO driver"
252	depends on DM_GPIO && ARCH_MVEBU
253	default y
254	help
255	  Say yes here to support Marvell MVEBU (Armada XP/38x) GPIOs.
256
257config ZYNQ_GPIO
258	bool "Zynq GPIO driver"
259	depends on DM_GPIO && (ARCH_ZYNQ || ARCH_ZYNQMP)
260	default y
261	help
262	  Supports GPIO access on Zynq SoC.
263
264config DM_74X164
265	bool "74x164 serial-in/parallel-out 8-bits shift register"
266	depends on DM_GPIO
267	help
268	  Driver for 74x164 compatible serial-in/parallel-out 8-outputs
269	  shift registers, such as 74lv165, 74hc595.
270	  This driver can be used to provide access to more gpio outputs.
271
272config DM_PCA953X
273	bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
274	depends on DM_GPIO
275	help
276	  Say yes here to provide access to several register-oriented
277	  SMBus I/O expanders, made mostly by NXP or TI.  Compatible
278	  models include:
279
280	  4 bits:	pca9536, pca9537
281
282	  8 bits:	max7310, max7315, pca6107, pca9534, pca9538, pca9554,
283			pca9556, pca9557, pca9574, tca6408, xra1202
284
285	  16 bits:	max7312, max7313, pca9535, pca9539, pca9555, pca9575,
286			tca6416
287
288	  24 bits:	tca6424
289
290	  40 bits:	pca9505, pca9698
291
292	  Now, max 24 bits chips and PCA953X compatible chips are
293	  supported
294
295config MPC8XXX_GPIO
296	bool "Freescale MPC8XXX GPIO driver"
297	depends on DM_GPIO
298	help
299	  This driver supports the built-in GPIO controller of MPC8XXX CPUs.
300	  Each GPIO bank is identified by its own entry in the device tree,
301	  i.e.
302
303	  gpio-controller@fc00 {
304		#gpio-cells = <2>;
305		compatible = "fsl,pq3-gpio";
306		reg = <0xfc00 0x100>
307	  }
308
309	  By default, each bank is assumed to have 32 GPIOs, but the ngpios
310	  setting is honored, so the number of GPIOs for each bank is
311	  configurable to match the actual GPIO count of the SoC (e.g. the
312	  32/32/23 banks of the P1022 SoC).
313
314	  Aside from the standard functions of input/output mode, and output
315	  value setting, the open-drain feature, which can configure individual
316	  GPIOs to work as open-drain outputs, is supported.
317endmenu
318