xref: /openbmc/u-boot/drivers/gpio/Kconfig (revision 5d0c74e6) 
1#
2# GPIO infrastructure and drivers
3#
4
5menu "GPIO Support"
6
7config DM_GPIO
8	bool "Enable Driver Model for GPIO drivers"
9	depends on DM
10	help
11	  Enable driver model for GPIO access. The standard GPIO
12	  interface (gpio_get_value(), etc.) is then implemented by
13	  the GPIO uclass. Drivers provide methods to query the
14	  particular GPIOs that they provide. The uclass interface
15	  is defined in include/asm-generic/gpio.h.
16
17config ALTERA_PIO
18	bool "Altera PIO driver"
19	depends on DM_GPIO
20	help
21	  Select this to enable PIO for Altera devices. Please find
22	  details on the "Embedded Peripherals IP User Guide" of Altera.
23
24config BCM6345_GPIO
25	bool "BCM6345 GPIO driver"
26	depends on DM_GPIO && ARCH_BMIPS
27	help
28	  This driver supports the GPIO banks on BCM6345 SoCs.
29
30config DWAPB_GPIO
31	bool "DWAPB GPIO driver"
32	depends on DM && DM_GPIO
33	default n
34	help
35	  Support for the Designware APB GPIO driver.
36
37config AT91_GPIO
38	bool "AT91 PIO GPIO driver"
39	depends on DM_GPIO
40	default n
41	help
42	  Say yes here to select AT91 PIO GPIO driver. AT91 PIO
43	  controller manages up to 32 fully programmable input/output
44	  lines. Each I/O line may be dedicated as a general-purpose
45	  I/O or be assigned to a function of an embedded peripheral.
46	  The assignment to a function of an embedded peripheral is
47	  the responsibility of AT91 Pinctrl driver. This driver is
48	  responsible for the general-purpose I/O.
49
50config ATMEL_PIO4
51	bool "ATMEL PIO4 driver"
52	depends on DM_GPIO
53	default n
54	help
55	  Say yes here to support the Atmel PIO4 driver.
56	  The PIO4 is new version of Atmel PIO controller, which manages
57	  up to 128 fully programmable input/output lines. Each I/O line
58	  may be dedicated as a general purpose I/O or be assigned to
59	  a function of an embedded peripheral.
60
61config INTEL_BROADWELL_GPIO
62	bool "Intel Broadwell GPIO driver"
63	depends on DM
64	help
65	  This driver supports Broadwell U devices which have an expanded
66	  GPIO feature set. The difference is large enough to merit a separate
67	  driver from the common Intel ICH6 driver. It supports a total of
68	  95 GPIOs which can be configured from the device tree.
69
70config INTEL_ICH6_GPIO
71	bool "Intel ICH6 compatible legacy GPIO driver"
72	depends on DM_GPIO
73	help
74	  Say yes here to select Intel ICH6 compatible legacy GPIO driver.
75
76config IMX_RGPIO2P
77	bool "i.MX7ULP RGPIO2P driver"
78	depends on DM
79	default n
80	help
81	  This driver supports i.MX7ULP Rapid GPIO2P controller.
82
83config HSDK_CREG_GPIO
84	bool "HSDK CREG GPIO griver"
85	depends on DM_GPIO
86	default n
87	help
88	  This driver supports CREG GPIOs on Synopsys HSDK SOC.
89
90config LPC32XX_GPIO
91	bool "LPC32XX GPIO driver"
92	depends on DM
93	default n
94	help
95	  Support for the LPC32XX GPIO driver.
96
97config MSM_GPIO
98	bool "Qualcomm GPIO driver"
99	depends on DM_GPIO
100	default n
101	help
102	  Support GPIO controllers on Qualcomm Snapdragon family of SoCs.
103	  This controller have single bank (default name "soc"), every
104	  gpio has it's own set of registers.
105	  Only simple GPIO operations are supported (get/set, change of
106	  direction and checking pin function).
107	  Supported devices:
108	  - APQ8016
109	  - MSM8916
110
111config MXC_GPIO
112	bool "Freescale/NXP MXC UART driver"
113	help
114	  Support GPIO controllers on various i.MX platforms
115
116config OMAP_GPIO
117	bool "TI OMAP GPIO driver"
118	depends on ARCH_OMAP2PLUS
119	default y
120	help
121	  Support GPIO controllers on the TI OMAP3/4/5 and related (such as
122	  AM335x/AM43xx/AM57xx/DRA7xx/etc) families of SoCs.
123
124config CMD_PCA953X
125	bool "Enable the pca953x command"
126	help
127	  Deprecated: This should be converted to driver model.
128
129	  This command provides access to a pca953x GPIO device using the
130	  legacy GPIO interface. Several subcommands are provided which mirror
131	  the standard 'gpio' command. It should use that instead.
132
133config PM8916_GPIO
134	bool "Qualcomm PM8916 PMIC GPIO/keypad driver"
135	depends on DM_GPIO && PMIC_PM8916
136	help
137	  Support for GPIO pins and power/reset buttons found on
138	  Qualcomm PM8916 PMIC.
139	  Default name for GPIO bank is "pm8916".
140	  Power and reset buttons are placed in "pm8916_key" bank and
141          have gpio numbers 0 and 1 respectively.
142
143config PCF8575_GPIO
144	bool "PCF8575 I2C GPIO Expander driver"
145	depends on DM_GPIO && DM_I2C
146	help
147	 Support for PCF8575 I2C 16-bit GPIO expander. Most of these
148	 chips are from NXP and TI.
149
150config RCAR_GPIO
151	bool "Renesas RCar GPIO driver"
152	depends on DM_GPIO && ARCH_RMOBILE
153	help
154	  This driver supports the GPIO banks on Renesas RCar SoCs.
155
156config ROCKCHIP_GPIO
157	bool "Rockchip GPIO driver"
158	depends on DM_GPIO
159	help
160	  Support GPIO access on Rockchip SoCs. The GPIOs are arranged into
161	  a number of banks (different for each SoC type) each with 32 GPIOs.
162	  The GPIOs for a device are defined in the device tree with one node
163	  for each bank.
164
165config SANDBOX_GPIO
166	bool "Enable sandbox GPIO driver"
167	depends on SANDBOX && DM && DM_GPIO
168	help
169	  This driver supports some simulated GPIOs which can be adjusted
170	  using 'back door' functions like sandbox_gpio_set_value(). Then the
171	  GPIOs can be inspected through the normal get_get_value()
172	  interface. The purpose of this is to allow GPIOs to be used as
173	  normal in sandbox, perhaps with test code actually driving the
174	  behaviour of those GPIOs.
175
176config SANDBOX_GPIO_COUNT
177	int "Number of sandbox GPIOs"
178	depends on SANDBOX_GPIO
179	default 128
180	help
181	  The sandbox driver can support any number of GPIOs. Generally these
182	  are specified using the device tree. But you can also have a number
183	  of 'anonymous' GPIOs that do not belong to any device or bank.
184	  Select a suitable value depending on your needs.
185
186config XILINX_GPIO
187	bool "Xilinx GPIO driver"
188	help
189	  This config enable the Xilinx GPIO driver for Microblaze.
190
191config CMD_TCA642X
192	bool "tca642x - Command to access tca642x state"
193	help
194	  DEPRECATED - This needs conversion to driver model
195
196	  This provides a way to looking at the pin state of this device.
197	  This mirrors the 'gpio' command and that should be used in preference
198	  to custom code.
199
200config TEGRA_GPIO
201	bool "Tegra20..210 GPIO driver"
202	depends on DM_GPIO
203	help
204	  Support for the GPIO controller contained in NVIDIA Tegra20 through
205	  Tegra210.
206
207config TEGRA186_GPIO
208	bool "Tegra186 GPIO driver"
209	depends on DM_GPIO
210	help
211	  Support for the GPIO controller contained in NVIDIA Tegra186. This
212	  covers both the "main" and "AON" controller instances, even though
213	  they have slightly different register layout.
214
215config GPIO_UNIPHIER
216	bool "UniPhier GPIO"
217	depends on ARCH_UNIPHIER
218	help
219	  Say yes here to support UniPhier GPIOs.
220
221config VYBRID_GPIO
222	bool "Vybrid GPIO driver"
223	depends on DM
224	default n
225	help
226	  Say yes here to support Vybrid vf610 GPIOs.
227
228config PIC32_GPIO
229	bool "Microchip PIC32 GPIO driver"
230	depends on DM_GPIO && MACH_PIC32
231	default y
232	help
233	  Say yes here to support Microchip PIC32 GPIOs.
234
235config STM32F7_GPIO
236	bool "ST STM32 GPIO driver"
237	depends on DM_GPIO && (STM32 || ARCH_STM32MP)
238	default y
239	help
240	  Device model driver support for STM32 GPIO controller. It should be
241	  usable on many stm32 families like stm32f4 & stm32H7.
242	  Tested on STM32F7.
243
244config MVEBU_GPIO
245	bool "Marvell MVEBU GPIO driver"
246	depends on DM_GPIO && ARCH_MVEBU
247	default y
248	help
249	  Say yes here to support Marvell MVEBU (Armada XP/38x) GPIOs.
250
251config ZYNQ_GPIO
252	bool "Zynq GPIO driver"
253	depends on DM_GPIO && (ARCH_ZYNQ || ARCH_ZYNQMP)
254	default y
255	help
256	  Supports GPIO access on Zynq SoC.
257
258config DM_74X164
259	bool "74x164 serial-in/parallel-out 8-bits shift register"
260	depends on DM_GPIO
261	help
262	  Driver for 74x164 compatible serial-in/parallel-out 8-outputs
263	  shift registers, such as 74lv165, 74hc595.
264	  This driver can be used to provide access to more gpio outputs.
265
266config DM_PCA953X
267	bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
268	depends on DM_GPIO
269	help
270	  Say yes here to provide access to several register-oriented
271	  SMBus I/O expanders, made mostly by NXP or TI.  Compatible
272	  models include:
273
274	  4 bits:	pca9536, pca9537
275
276	  8 bits:	max7310, max7315, pca6107, pca9534, pca9538, pca9554,
277			pca9556, pca9557, pca9574, tca6408, xra1202
278
279	  16 bits:	max7312, max7313, pca9535, pca9539, pca9555, pca9575,
280			tca6416
281
282	  24 bits:	tca6424
283
284	  40 bits:	pca9505, pca9698
285
286	  Now, max 24 bits chips and PCA953X compatible chips are
287	  supported
288
289config MPC8XXX_GPIO
290	bool "Freescale MPC8XXX GPIO driver"
291	depends on DM_GPIO
292	help
293	  This driver supports the built-in GPIO controller of MPC8XXX CPUs.
294	  Each GPIO bank is identified by its own entry in the device tree,
295	  i.e.
296
297	  gpio-controller@fc00 {
298		#gpio-cells = <2>;
299		compatible = "fsl,pq3-gpio";
300		reg = <0xfc00 0x100>
301	  }
302
303	  By default, each bank is assumed to have 32 GPIOs, but the ngpios
304	  setting is honored, so the number of GPIOs for each bank is
305	  configurable to match the actual GPIO count of the SoC (e.g. the
306	  32/32/23 banks of the P1022 SoC).
307
308	  Aside from the standard functions of input/output mode, and output
309	  value setting, the open-drain feature, which can configure individual
310	  GPIOs to work as open-drain outputs, is supported.
311endmenu
312