xref: /openbmc/u-boot/drivers/gpio/Kconfig (revision 0645c23a) 
1#
2# GPIO infrastructure and drivers
3#
4
5menu "GPIO Support"
6
7config DM_GPIO
8	bool "Enable Driver Model for GPIO drivers"
9	depends on DM
10	help
11	  Enable driver model for GPIO access. The standard GPIO
12	  interface (gpio_get_value(), etc.) is then implemented by
13	  the GPIO uclass. Drivers provide methods to query the
14	  particular GPIOs that they provide. The uclass interface
15	  is defined in include/asm-generic/gpio.h.
16
17config ALTERA_PIO
18	bool "Altera PIO driver"
19	depends on DM_GPIO
20	help
21	  Select this to enable PIO for Altera devices. Please find
22	  details on the "Embedded Peripherals IP User Guide" of Altera.
23
24config DWAPB_GPIO
25	bool "DWAPB GPIO driver"
26	depends on DM && DM_GPIO
27	default n
28	help
29	  Support for the Designware APB GPIO driver.
30
31config AT91_GPIO
32	bool "AT91 PIO GPIO driver"
33	depends on DM_GPIO
34	default n
35	help
36	  Say yes here to select AT91 PIO GPIO driver. AT91 PIO
37	  controller manages up to 32 fully programmable input/output
38	  lines. Each I/O line may be dedicated as a general-purpose
39	  I/O or be assigned to a function of an embedded peripheral.
40	  The assignment to a function of an embedded peripheral is
41	  the responsibility of AT91 Pinctrl driver. This driver is
42	  responsible for the general-purpose I/O.
43
44config ATMEL_PIO4
45	bool "ATMEL PIO4 driver"
46	depends on DM_GPIO
47	default n
48	help
49	  Say yes here to support the Atmel PIO4 driver.
50	  The PIO4 is new version of Atmel PIO controller, which manages
51	  up to 128 fully programmable input/output lines. Each I/O line
52	  may be dedicated as a general purpose I/O or be assigned to
53	  a function of an embedded peripheral.
54
55config INTEL_BROADWELL_GPIO
56	bool "Intel Broadwell GPIO driver"
57	depends on DM
58	help
59	  This driver supports Broadwell U devices which have an expanded
60	  GPIO feature set. The difference is large enough to merit a separate
61	  driver from the common Intel ICH6 driver. It supports a total of
62	  95 GPIOs which can be configured from the device tree.
63
64config IMX_RGPIO2P
65	bool "i.MX7ULP RGPIO2P driver"
66	depends on DM
67	default n
68	help
69	  This driver supports i.MX7ULP Rapid GPIO2P controller.
70
71config LPC32XX_GPIO
72	bool "LPC32XX GPIO driver"
73	depends on DM
74	default n
75	help
76	  Support for the LPC32XX GPIO driver.
77
78config MSM_GPIO
79	bool "Qualcomm GPIO driver"
80	depends on DM_GPIO
81	default n
82	help
83	  Support GPIO controllers on Qualcomm Snapdragon family of SoCs.
84	  This controller have single bank (default name "soc"), every
85	  gpio has it's own set of registers.
86	  Only simple GPIO operations are supported (get/set, change of
87	  direction and checking pin function).
88	  Supported devices:
89	  - APQ8016
90	  - MSM8916
91
92config PM8916_GPIO
93	bool "Qualcomm PM8916 PMIC GPIO/keypad driver"
94	depends on DM_GPIO && PMIC_PM8916
95	help
96	  Support for GPIO pins and power/reset buttons found on
97	  Qualcomm PM8916 PMIC.
98	  Default name for GPIO bank is "pm8916".
99	  Power and reset buttons are placed in "pm8916_key" bank and
100          have gpio numbers 0 and 1 respectively.
101
102config PCF8575_GPIO
103	bool "PCF8575 I2C GPIO Expander driver"
104	depends on DM_GPIO && DM_I2C
105	help
106	 Support for PCF8575 I2C 16-bit GPIO expander. Most of these
107	 chips are from NXP and TI.
108
109config ROCKCHIP_GPIO
110	bool "Rockchip GPIO driver"
111	depends on DM_GPIO
112	help
113	  Support GPIO access on Rockchip SoCs. The GPIOs are arranged into
114	  a number of banks (different for each SoC type) each with 32 GPIOs.
115	  The GPIOs for a device are defined in the device tree with one node
116	  for each bank.
117
118config SANDBOX_GPIO
119	bool "Enable sandbox GPIO driver"
120	depends on SANDBOX && DM && DM_GPIO
121	help
122	  This driver supports some simulated GPIOs which can be adjusted
123	  using 'back door' functions like sandbox_gpio_set_value(). Then the
124	  GPIOs can be inspected through the normal get_get_value()
125	  interface. The purpose of this is to allow GPIOs to be used as
126	  normal in sandbox, perhaps with test code actually driving the
127	  behaviour of those GPIOs.
128
129config SANDBOX_GPIO_COUNT
130	int "Number of sandbox GPIOs"
131	depends on SANDBOX_GPIO
132	default 128
133	help
134	  The sandbox driver can support any number of GPIOs. Generally these
135	  are specified using the device tree. But you can also have a number
136	  of 'anonymous' GPIOs that do not belong to any device or bank.
137	  Select a suitable value depending on your needs.
138
139config TEGRA_GPIO
140	bool "Tegra20..210 GPIO driver"
141	depends on DM_GPIO
142	help
143	  Support for the GPIO controller contained in NVIDIA Tegra20 through
144	  Tegra210.
145
146config TEGRA186_GPIO
147	bool "Tegra186 GPIO driver"
148	depends on DM_GPIO
149	help
150	  Support for the GPIO controller contained in NVIDIA Tegra186. This
151	  covers both the "main" and "AON" controller instances, even though
152	  they have slightly different register layout.
153
154config GPIO_UNIPHIER
155	bool "UniPhier GPIO"
156	depends on ARCH_UNIPHIER
157	help
158	  Say yes here to support UniPhier GPIOs.
159
160config VYBRID_GPIO
161	bool "Vybrid GPIO driver"
162	depends on DM
163	default n
164	help
165	  Say yes here to support Vybrid vf610 GPIOs.
166
167config PIC32_GPIO
168	bool "Microchip PIC32 GPIO driver"
169	depends on DM_GPIO && MACH_PIC32
170	default y
171	help
172	  Say yes here to support Microchip PIC32 GPIOs.
173
174config MVEBU_GPIO
175	bool "Marvell MVEBU GPIO driver"
176	depends on DM_GPIO && ARCH_MVEBU
177	default y
178	help
179	  Say yes here to support Marvell MVEBU (Armada XP/38x) GPIOs.
180
181config ZYNQ_GPIO
182	bool "Zynq GPIO driver"
183	depends on DM_GPIO && (ARCH_ZYNQ || ARCH_ZYNQMP)
184	default y
185	help
186	  Supports GPIO access on Zynq SoC.
187
188config DM_74X164
189	bool "74x164 serial-in/parallel-out 8-bits shift register"
190	depends on DM_GPIO
191	help
192	  Driver for 74x164 compatible serial-in/parallel-out 8-outputs
193	  shift registers, such as 74lv165, 74hc595.
194	  This driver can be used to provide access to more gpio outputs.
195
196config DM_PCA953X
197	bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
198	depends on DM_GPIO
199	help
200	  Say yes here to provide access to several register-oriented
201	  SMBus I/O expanders, made mostly by NXP or TI.  Compatible
202	  models include:
203
204	  4 bits:	pca9536, pca9537
205
206	  8 bits:	max7310, max7315, pca6107, pca9534, pca9538, pca9554,
207			pca9556, pca9557, pca9574, tca6408, xra1202
208
209	  16 bits:	max7312, max7313, pca9535, pca9539, pca9555, pca9575,
210			tca6416
211
212	  24 bits:	tca6424
213
214	  40 bits:	pca9505, pca9698
215
216	  Now, max 24 bits chips and PCA953X compatible chips are
217	  supported
218
219config MPC85XX_GPIO
220	bool "Freescale MPC85XX GPIO driver"
221	depends on DM_GPIO
222	help
223	  This driver supports the built-in GPIO controller of MPC85XX CPUs.
224	  Each GPIO bank is identified by its own entry in the device tree,
225	  i.e.
226
227	  gpio-controller@fc00 {
228		#gpio-cells = <2>;
229		compatible = "fsl,pq3-gpio";
230		reg = <0xfc00 0x100>
231	  }
232
233	  By default, each bank is assumed to have 32 GPIOs, but the ngpios
234	  setting is honored, so the number of GPIOs for each bank is
235	  configurable to match the actual GPIO count of the SoC (e.g. the
236	  32/32/23 banks of the P1022 SoC).
237
238	  Aside from the standard functions of input/output mode, and output
239	  value setting, the open-drain feature, which can configure individual
240	  GPIOs to work as open-drain outputs, is supported.
241
242	  The driver has been tested on MPC85XX, but it is likely that other
243	  PowerQUICC III devices will work as well.
244endmenu
245