xref: /openbmc/u-boot/drivers/dma/fsl_dma.c (revision 5794619e)
1 /*
2  * Copyright 2004,2007,2008 Freescale Semiconductor, Inc.
3  * (C) Copyright 2002, 2003 Motorola Inc.
4  * Xianghua Xiao (X.Xiao@motorola.com)
5  *
6  * (C) Copyright 2000
7  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
8  *
9  * See file CREDITS for list of people who contributed to this
10  * project.
11  *
12  * This program is free software; you can redistribute it and/or
13  * modify it under the terms of the GNU General Public License as
14  * published by the Free Software Foundation; either version 2 of
15  * the License, or (at your option) any later version.
16  *
17  * This program is distributed in the hope that it will be useful,
18  * but WITHOUT ANY WARRANTY; without even the implied warranty of
19  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
20  * GNU General Public License for more details.
21  *
22  * You should have received a copy of the GNU General Public License
23  * along with this program; if not, write to the Free Software
24  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
25  * MA 02111-1307 USA
26  */
27 
28 #include <config.h>
29 #include <common.h>
30 #include <asm/io.h>
31 #include <asm/fsl_dma.h>
32 
33 /* Controller can only transfer 2^26 - 1 bytes at a time */
34 #define FSL_DMA_MAX_SIZE	(0x3ffffff)
35 
36 #if defined(CONFIG_MPC83xx)
37 #define FSL_DMA_MR_DEFAULT (FSL_DMA_MR_CTM_DIRECT | FSL_DMA_MR_DMSEN)
38 #else
39 #define FSL_DMA_MR_DEFAULT (FSL_DMA_MR_BWC_DIS | FSL_DMA_MR_CTM_DIRECT)
40 #endif
41 
42 
43 #if defined(CONFIG_MPC83xx)
44 dma83xx_t *dma_base = (void *)(CONFIG_SYS_MPC83xx_DMA_ADDR);
45 #elif defined(CONFIG_MPC85xx)
46 ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC85xx_DMA_ADDR);
47 #elif defined(CONFIG_MPC86xx)
48 ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC86xx_DMA_ADDR);
49 #else
50 #error "Freescale DMA engine not supported on your processor"
51 #endif
52 
53 static void dma_sync(void)
54 {
55 #if defined(CONFIG_MPC85xx)
56 	asm("sync; isync; msync");
57 #elif defined(CONFIG_MPC86xx)
58 	asm("sync; isync");
59 #endif
60 }
61 
62 static void out_dma32(volatile unsigned *addr, int val)
63 {
64 #if defined(CONFIG_MPC83xx)
65 	out_le32(addr, val);
66 #else
67 	out_be32(addr, val);
68 #endif
69 }
70 
71 static uint in_dma32(volatile unsigned *addr)
72 {
73 #if defined(CONFIG_MPC83xx)
74 	return in_le32(addr);
75 #else
76 	return in_be32(addr);
77 #endif
78 }
79 
80 static uint dma_check(void) {
81 	volatile fsl_dma_t *dma = &dma_base->dma[0];
82 	uint status;
83 
84 	/* While the channel is busy, spin */
85 	do {
86 		status = in_dma32(&dma->sr);
87 	} while (status & FSL_DMA_SR_CB);
88 
89 	/* clear MR[CS] channel start bit */
90 	out_dma32(&dma->mr, in_dma32(&dma->mr) & ~FSL_DMA_MR_CS);
91 	dma_sync();
92 
93 	if (status != 0)
94 		printf ("DMA Error: status = %x\n", status);
95 
96 	return status;
97 }
98 
99 #if !defined(CONFIG_MPC83xx)
100 void dma_init(void) {
101 	volatile fsl_dma_t *dma = &dma_base->dma[0];
102 
103 	out_dma32(&dma->satr, FSL_DMA_SATR_SREAD_SNOOP);
104 	out_dma32(&dma->datr, FSL_DMA_DATR_DWRITE_SNOOP);
105 	out_dma32(&dma->sr, 0xffffffff); /* clear any errors */
106 	dma_sync();
107 }
108 #endif
109 
110 int dmacpy(phys_addr_t dest, phys_addr_t src, phys_size_t count) {
111 	volatile fsl_dma_t *dma = &dma_base->dma[0];
112 	uint xfer_size;
113 
114 	while (count) {
115 		xfer_size = MIN(FSL_DMA_MAX_SIZE, count);
116 
117 		out_dma32(&dma->dar, (uint) dest);
118 		out_dma32(&dma->sar, (uint) src);
119 		out_dma32(&dma->bcr, xfer_size);
120 		dma_sync();
121 
122 		/* Prepare mode register */
123 		out_dma32(&dma->mr, FSL_DMA_MR_DEFAULT);
124 		dma_sync();
125 
126 		/* Start the transfer */
127 		out_dma32(&dma->mr, FSL_DMA_MR_DEFAULT | FSL_DMA_MR_CS);
128 
129 		count -= xfer_size;
130 		src += xfer_size;
131 		dest += xfer_size;
132 
133 		dma_sync();
134 
135 		if (dma_check())
136 			return -1;
137 	}
138 
139 	return 0;
140 }
141 
142 /*
143  * 85xx/86xx use dma to initialize SDRAM when !CONFIG_ECC_INIT_VIA_DDRCONTROLLER
144  * while 83xx uses dma to initialize SDRAM when CONFIG_DDR_ECC_INIT_VIA_DMA
145  */
146 #if ((!defined CONFIG_MPC83xx && defined(CONFIG_DDR_ECC) &&	\
147 	!defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)) ||		\
148 	(defined(CONFIG_MPC83xx) && defined(CONFIG_DDR_ECC_INIT_VIA_DMA)))
149 void dma_meminit(uint val, uint size)
150 {
151 	uint *p = 0;
152 	uint i = 0;
153 
154 	for (*p = 0; p < (uint *)(8 * 1024); p++) {
155 		if (((uint)p & 0x1f) == 0)
156 			ppcDcbz((ulong)p);
157 
158 		*p = (uint)CONFIG_MEM_INIT_VALUE;
159 
160 		if (((uint)p & 0x1c) == 0x1c)
161 			ppcDcbf((ulong)p);
162 	}
163 
164 	dmacpy(0x002000, 0, 0x002000); /* 8K */
165 	dmacpy(0x004000, 0, 0x004000); /* 16K */
166 	dmacpy(0x008000, 0, 0x008000); /* 32K */
167 	dmacpy(0x010000, 0, 0x010000); /* 64K */
168 	dmacpy(0x020000, 0, 0x020000); /* 128K */
169 	dmacpy(0x040000, 0, 0x040000); /* 256K */
170 	dmacpy(0x080000, 0, 0x080000); /* 512K */
171 	dmacpy(0x100000, 0, 0x100000); /* 1M */
172 	dmacpy(0x200000, 0, 0x200000); /* 2M */
173 	dmacpy(0x400000, 0, 0x400000); /* 4M */
174 
175 	for (i = 1; i < size / 0x800000; i++)
176 		dmacpy((0x800000 * i), 0, 0x800000);
177 }
178 #endif
179