xref: /openbmc/u-boot/drivers/dfu/dfu_nand.c (revision dfe6f4d6)
1 /*
2  * dfu_nand.c -- DFU for NAND routines.
3  *
4  * Copyright (C) 2012-2013 Texas Instruments, Inc.
5  *
6  * Based on dfu_mmc.c which is:
7  * Copyright (C) 2012 Samsung Electronics
8  * author: Lukasz Majewski <l.majewski@samsung.com>
9  *
10  * SPDX-License-Identifier:	GPL-2.0+
11  */
12 
13 #include <common.h>
14 #include <malloc.h>
15 #include <errno.h>
16 #include <div64.h>
17 #include <dfu.h>
18 #include <linux/mtd/mtd.h>
19 #include <jffs2/load_kernel.h>
20 #include <nand.h>
21 
22 static int nand_block_op(enum dfu_op op, struct dfu_entity *dfu,
23 			u64 offset, void *buf, long *len)
24 {
25 	loff_t start, lim;
26 	size_t count, actual;
27 	int ret;
28 	nand_info_t *nand;
29 
30 	/* if buf == NULL return total size of the area */
31 	if (buf == NULL) {
32 		*len = dfu->data.nand.size;
33 		return 0;
34 	}
35 
36 	start = dfu->data.nand.start + offset + dfu->bad_skip;
37 	lim = dfu->data.nand.start + dfu->data.nand.size - start;
38 	count = *len;
39 
40 	if (nand_curr_device < 0 ||
41 	    nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
42 	    !nand_info[nand_curr_device].name) {
43 		printf("%s: invalid nand device\n", __func__);
44 		return -1;
45 	}
46 
47 	nand = &nand_info[nand_curr_device];
48 
49 	if (op == DFU_OP_READ) {
50 		ret = nand_read_skip_bad(nand, start, &count, &actual,
51 				lim, buf);
52 	} else {
53 		nand_erase_options_t opts;
54 
55 		memset(&opts, 0, sizeof(opts));
56 		opts.offset = start;
57 		opts.length = count;
58 		opts.spread = 1;
59 		opts.quiet = 1;
60 		opts.lim = lim;
61 		/* first erase */
62 		ret = nand_erase_opts(nand, &opts);
63 		if (ret)
64 			return ret;
65 		/* then write */
66 		ret = nand_write_skip_bad(nand, start, &count, &actual,
67 				lim, buf, 0);
68 	}
69 
70 	if (ret != 0) {
71 		printf("%s: nand_%s_skip_bad call failed at %llx!\n",
72 		       __func__, op == DFU_OP_READ ? "read" : "write",
73 		       start);
74 		return ret;
75 	}
76 
77 	/*
78 	 * Find out where we stopped writing data.  This can be deeper into
79 	 * the NAND than we expected due to having to skip bad blocks.  So
80 	 * we must take this into account for the next write, if any.
81 	 */
82 	if (actual > count)
83 		dfu->bad_skip += actual - count;
84 
85 	return ret;
86 }
87 
88 static inline int nand_block_write(struct dfu_entity *dfu,
89 		u64 offset, void *buf, long *len)
90 {
91 	return nand_block_op(DFU_OP_WRITE, dfu, offset, buf, len);
92 }
93 
94 static inline int nand_block_read(struct dfu_entity *dfu,
95 		u64 offset, void *buf, long *len)
96 {
97 	return nand_block_op(DFU_OP_READ, dfu, offset, buf, len);
98 }
99 
100 static int dfu_write_medium_nand(struct dfu_entity *dfu,
101 		u64 offset, void *buf, long *len)
102 {
103 	int ret = -1;
104 
105 	switch (dfu->layout) {
106 	case DFU_RAW_ADDR:
107 		ret = nand_block_write(dfu, offset, buf, len);
108 		break;
109 	default:
110 		printf("%s: Layout (%s) not (yet) supported!\n", __func__,
111 		       dfu_get_layout(dfu->layout));
112 	}
113 
114 	return ret;
115 }
116 
117 long dfu_get_medium_size_nand(struct dfu_entity *dfu)
118 {
119 	return dfu->data.nand.size;
120 }
121 
122 static int dfu_read_medium_nand(struct dfu_entity *dfu, u64 offset, void *buf,
123 		long *len)
124 {
125 	int ret = -1;
126 
127 	switch (dfu->layout) {
128 	case DFU_RAW_ADDR:
129 		ret = nand_block_read(dfu, offset, buf, len);
130 		break;
131 	default:
132 		printf("%s: Layout (%s) not (yet) supported!\n", __func__,
133 		       dfu_get_layout(dfu->layout));
134 	}
135 
136 	return ret;
137 }
138 
139 static int dfu_flush_medium_nand(struct dfu_entity *dfu)
140 {
141 	int ret = 0;
142 
143 	/* in case of ubi partition, erase rest of the partition */
144 	if (dfu->data.nand.ubi) {
145 		nand_info_t *nand;
146 		nand_erase_options_t opts;
147 
148 		if (nand_curr_device < 0 ||
149 		    nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
150 		    !nand_info[nand_curr_device].name) {
151 			printf("%s: invalid nand device\n", __func__);
152 			return -1;
153 		}
154 
155 		nand = &nand_info[nand_curr_device];
156 
157 		memset(&opts, 0, sizeof(opts));
158 		opts.offset = dfu->data.nand.start + dfu->offset +
159 				dfu->bad_skip;
160 		opts.length = dfu->data.nand.start +
161 				dfu->data.nand.size - opts.offset;
162 		ret = nand_erase_opts(nand, &opts);
163 		if (ret != 0)
164 			printf("Failure erase: %d\n", ret);
165 	}
166 
167 	return ret;
168 }
169 
170 unsigned int dfu_polltimeout_nand(struct dfu_entity *dfu)
171 {
172 	/*
173 	 * Currently, Poll Timeout != 0 is only needed on nand
174 	 * ubi partition, as the not used sectors need an erase
175 	 */
176 	if (dfu->data.nand.ubi)
177 		return DFU_MANIFEST_POLL_TIMEOUT;
178 
179 	return DFU_DEFAULT_POLL_TIMEOUT;
180 }
181 
182 int dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr, char *s)
183 {
184 	char *st;
185 	int ret, dev, part;
186 
187 	dfu->data.nand.ubi = 0;
188 	dfu->dev_type = DFU_DEV_NAND;
189 	st = strsep(&s, " ");
190 	if (!strcmp(st, "raw")) {
191 		dfu->layout = DFU_RAW_ADDR;
192 		dfu->data.nand.start = simple_strtoul(s, &s, 16);
193 		s++;
194 		dfu->data.nand.size = simple_strtoul(s, &s, 16);
195 	} else if ((!strcmp(st, "part")) || (!strcmp(st, "partubi"))) {
196 		char mtd_id[32];
197 		struct mtd_device *mtd_dev;
198 		u8 part_num;
199 		struct part_info *pi;
200 
201 		dfu->layout = DFU_RAW_ADDR;
202 
203 		dev = simple_strtoul(s, &s, 10);
204 		s++;
205 		part = simple_strtoul(s, &s, 10);
206 
207 		sprintf(mtd_id, "%s%d,%d", "nand", dev, part - 1);
208 		printf("using id '%s'\n", mtd_id);
209 
210 		mtdparts_init();
211 
212 		ret = find_dev_and_part(mtd_id, &mtd_dev, &part_num, &pi);
213 		if (ret != 0) {
214 			printf("Could not locate '%s'\n", mtd_id);
215 			return -1;
216 		}
217 
218 		dfu->data.nand.start = pi->offset;
219 		dfu->data.nand.size = pi->size;
220 		if (!strcmp(st, "partubi"))
221 			dfu->data.nand.ubi = 1;
222 	} else {
223 		printf("%s: Memory layout (%s) not supported!\n", __func__, st);
224 		return -1;
225 	}
226 
227 	dfu->get_medium_size = dfu_get_medium_size_nand;
228 	dfu->read_medium = dfu_read_medium_nand;
229 	dfu->write_medium = dfu_write_medium_nand;
230 	dfu->flush_medium = dfu_flush_medium_nand;
231 	dfu->poll_timeout = dfu_polltimeout_nand;
232 
233 	/* initial state */
234 	dfu->inited = 0;
235 
236 	return 0;
237 }
238