1 /* 2 * dfu_nand.c -- DFU for NAND routines. 3 * 4 * Copyright (C) 2012-2013 Texas Instruments, Inc. 5 * 6 * Based on dfu_mmc.c which is: 7 * Copyright (C) 2012 Samsung Electronics 8 * author: Lukasz Majewski <l.majewski@samsung.com> 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #include <common.h> 14 #include <malloc.h> 15 #include <errno.h> 16 #include <div64.h> 17 #include <dfu.h> 18 #include <linux/mtd/mtd.h> 19 #include <jffs2/load_kernel.h> 20 #include <nand.h> 21 22 static int nand_block_op(enum dfu_op op, struct dfu_entity *dfu, 23 u64 offset, void *buf, long *len) 24 { 25 loff_t start, lim; 26 size_t count, actual; 27 int ret; 28 nand_info_t *nand; 29 30 /* if buf == NULL return total size of the area */ 31 if (buf == NULL) { 32 *len = dfu->data.nand.size; 33 return 0; 34 } 35 36 start = dfu->data.nand.start + offset + dfu->bad_skip; 37 lim = dfu->data.nand.start + dfu->data.nand.size - start; 38 count = *len; 39 40 if (nand_curr_device < 0 || 41 nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE || 42 !nand_info[nand_curr_device].name) { 43 printf("%s: invalid nand device\n", __func__); 44 return -1; 45 } 46 47 nand = &nand_info[nand_curr_device]; 48 49 if (op == DFU_OP_READ) { 50 ret = nand_read_skip_bad(nand, start, &count, &actual, 51 lim, buf); 52 } else { 53 nand_erase_options_t opts; 54 55 memset(&opts, 0, sizeof(opts)); 56 opts.offset = start; 57 opts.length = count; 58 opts.spread = 1; 59 opts.quiet = 1; 60 opts.lim = lim; 61 /* first erase */ 62 ret = nand_erase_opts(nand, &opts); 63 if (ret) 64 return ret; 65 /* then write */ 66 ret = nand_write_skip_bad(nand, start, &count, &actual, 67 lim, buf, 0); 68 } 69 70 if (ret != 0) { 71 printf("%s: nand_%s_skip_bad call failed at %llx!\n", 72 __func__, op == DFU_OP_READ ? "read" : "write", 73 start); 74 return ret; 75 } 76 77 /* 78 * Find out where we stopped writing data. This can be deeper into 79 * the NAND than we expected due to having to skip bad blocks. So 80 * we must take this into account for the next write, if any. 81 */ 82 if (actual > count) 83 dfu->bad_skip += actual - count; 84 85 return ret; 86 } 87 88 static inline int nand_block_write(struct dfu_entity *dfu, 89 u64 offset, void *buf, long *len) 90 { 91 return nand_block_op(DFU_OP_WRITE, dfu, offset, buf, len); 92 } 93 94 static inline int nand_block_read(struct dfu_entity *dfu, 95 u64 offset, void *buf, long *len) 96 { 97 return nand_block_op(DFU_OP_READ, dfu, offset, buf, len); 98 } 99 100 static int dfu_write_medium_nand(struct dfu_entity *dfu, 101 u64 offset, void *buf, long *len) 102 { 103 int ret = -1; 104 105 switch (dfu->layout) { 106 case DFU_RAW_ADDR: 107 ret = nand_block_write(dfu, offset, buf, len); 108 break; 109 default: 110 printf("%s: Layout (%s) not (yet) supported!\n", __func__, 111 dfu_get_layout(dfu->layout)); 112 } 113 114 return ret; 115 } 116 117 static int dfu_read_medium_nand(struct dfu_entity *dfu, u64 offset, void *buf, 118 long *len) 119 { 120 int ret = -1; 121 122 switch (dfu->layout) { 123 case DFU_RAW_ADDR: 124 *len = dfu->data.nand.size; 125 ret = nand_block_read(dfu, offset, buf, len); 126 break; 127 default: 128 printf("%s: Layout (%s) not (yet) supported!\n", __func__, 129 dfu_get_layout(dfu->layout)); 130 } 131 132 return ret; 133 } 134 135 static int dfu_flush_medium_nand(struct dfu_entity *dfu) 136 { 137 int ret = 0; 138 139 /* in case of ubi partition, erase rest of the partition */ 140 if (dfu->data.nand.ubi) { 141 nand_info_t *nand; 142 nand_erase_options_t opts; 143 144 if (nand_curr_device < 0 || 145 nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE || 146 !nand_info[nand_curr_device].name) { 147 printf("%s: invalid nand device\n", __func__); 148 return -1; 149 } 150 151 nand = &nand_info[nand_curr_device]; 152 153 memset(&opts, 0, sizeof(opts)); 154 opts.offset = dfu->data.nand.start + dfu->offset + 155 dfu->bad_skip; 156 opts.length = dfu->data.nand.start + 157 dfu->data.nand.size - opts.offset; 158 ret = nand_erase_opts(nand, &opts); 159 if (ret != 0) 160 printf("Failure erase: %d\n", ret); 161 } 162 163 return ret; 164 } 165 166 unsigned int dfu_polltimeout_nand(struct dfu_entity *dfu) 167 { 168 /* 169 * Currently, Poll Timeout != 0 is only needed on nand 170 * ubi partition, as the not used sectors need an erase 171 */ 172 if (dfu->data.nand.ubi) 173 return DFU_MANIFEST_POLL_TIMEOUT; 174 175 return DFU_DEFAULT_POLL_TIMEOUT; 176 } 177 178 int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s) 179 { 180 char *st; 181 int ret, dev, part; 182 183 dfu->data.nand.ubi = 0; 184 dfu->dev_type = DFU_DEV_NAND; 185 st = strsep(&s, " "); 186 if (!strcmp(st, "raw")) { 187 dfu->layout = DFU_RAW_ADDR; 188 dfu->data.nand.start = simple_strtoul(s, &s, 16); 189 s++; 190 dfu->data.nand.size = simple_strtoul(s, &s, 16); 191 } else if ((!strcmp(st, "part")) || (!strcmp(st, "partubi"))) { 192 char mtd_id[32]; 193 struct mtd_device *mtd_dev; 194 u8 part_num; 195 struct part_info *pi; 196 197 dfu->layout = DFU_RAW_ADDR; 198 199 dev = simple_strtoul(s, &s, 10); 200 s++; 201 part = simple_strtoul(s, &s, 10); 202 203 sprintf(mtd_id, "%s%d,%d", "nand", dev, part - 1); 204 printf("using id '%s'\n", mtd_id); 205 206 mtdparts_init(); 207 208 ret = find_dev_and_part(mtd_id, &mtd_dev, &part_num, &pi); 209 if (ret != 0) { 210 printf("Could not locate '%s'\n", mtd_id); 211 return -1; 212 } 213 214 dfu->data.nand.start = pi->offset; 215 dfu->data.nand.size = pi->size; 216 if (!strcmp(st, "partubi")) 217 dfu->data.nand.ubi = 1; 218 } else { 219 printf("%s: Memory layout (%s) not supported!\n", __func__, st); 220 return -1; 221 } 222 223 dfu->read_medium = dfu_read_medium_nand; 224 dfu->write_medium = dfu_write_medium_nand; 225 dfu->flush_medium = dfu_flush_medium_nand; 226 dfu->poll_timeout = dfu_polltimeout_nand; 227 228 /* initial state */ 229 dfu->inited = 0; 230 231 return 0; 232 } 233