xref: /openbmc/u-boot/drivers/ddr/marvell/a38x/xor.h (revision da4cfa6b)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * Copyright (C) Marvell International Ltd. and its affiliates
4  */
5 
6 #ifndef _XOR_H
7 #define _XOR_H
8 
9 #define SRAM_BASE		0x40000000
10 
11 #define MV_XOR_MAX_UNIT		2	/* XOR unit == XOR engine */
12 #define MV_XOR_MAX_CHAN		4	/* total channels for all units */
13 #define MV_XOR_MAX_CHAN_PER_UNIT 2	/* channels for units */
14 
15 #define MV_IS_POWER_OF_2(num)	(((num) != 0) && (((num) & ((num) - 1)) == 0))
16 
17 /*
18  * This structure describes address space window. Window base can be
19  * 64 bit, window size up to 4GB
20  */
21 struct addr_win {
22 	u32 base_low;		/* 32bit base low       */
23 	u32 base_high;		/* 32bit base high      */
24 	u32 size;		/* 32bit size           */
25 };
26 
27 /* This structure describes SoC units address decode window	*/
28 struct unit_win_info {
29 	struct addr_win addr_win;	/* An address window */
30 	int enable;		/* Address decode window is enabled/disabled  */
31 	u8 attrib;		/* chip select attributes */
32 	u8 target_id;		/* Target Id of this MV_TARGET */
33 };
34 
35 /*
36  * This enumerator describes the type of functionality the XOR channel
37  * can have while using the same data structures.
38  */
39 enum xor_type {
40 	MV_XOR,			/* XOR channel functions as XOR accelerator   */
41 	MV_DMA,			/* XOR channel functions as IDMA channel      */
42 	MV_CRC32		/* XOR channel functions as CRC 32 calculator */
43 };
44 
45 enum mv_state {
46 	MV_IDLE,
47 	MV_ACTIVE,
48 	MV_PAUSED,
49 	MV_UNDEFINED_STATE
50 };
51 
52 /*
53  * This enumerator describes the set of commands that can be applied on
54  * an engine (e.g. IDMA, XOR). Appling a comman depends on the current
55  * status (see MV_STATE enumerator)
56  *
57  * Start can be applied only when status is IDLE
58  * Stop can be applied only when status is IDLE, ACTIVE or PAUSED
59  * Pause can be applied only when status is ACTIVE
60  * Restart can be applied only when status is PAUSED
61  */
62 enum mv_command {
63 	MV_START,		/* Start     */
64 	MV_STOP,		/* Stop     */
65 	MV_PAUSE,		/* Pause    */
66 	MV_RESTART		/* Restart  */
67 };
68 
69 enum xor_override_target {
70 	SRC_ADDR0,		/* Source Address #0 Control */
71 	SRC_ADDR1,		/* Source Address #1 Control */
72 	SRC_ADDR2,		/* Source Address #2 Control */
73 	SRC_ADDR3,		/* Source Address #3 Control */
74 	SRC_ADDR4,		/* Source Address #4 Control */
75 	SRC_ADDR5,		/* Source Address #5 Control */
76 	SRC_ADDR6,		/* Source Address #6 Control */
77 	SRC_ADDR7,		/* Source Address #7 Control */
78 	XOR_DST_ADDR,		/* Destination Address Control */
79 	XOR_NEXT_DESC		/* Next Descriptor Address Control */
80 };
81 
82 enum mv_state mv_xor_state_get(u32 chan);
83 void mv_xor_hal_init(u32 xor_chan_num);
84 int mv_xor_ctrl_set(u32 chan, u32 xor_ctrl);
85 int mv_xor_command_set(u32 chan, enum mv_command command);
86 int mv_xor_override_set(u32 chan, enum xor_override_target target, u32 win_num,
87 			int enable);
88 int mv_xor_transfer(u32 chan, enum xor_type type, u32 xor_chain_ptr);
89 
90 #endif
91