xref: /openbmc/u-boot/drivers/ddr/marvell/a38x/xor.h (revision d9b23e26)
1 /*
2  * Copyright (C) Marvell International Ltd. and its affiliates
3  *
4  * SPDX-License-Identifier:	GPL-2.0
5  */
6 
7 #ifndef _XOR_H
8 #define _XOR_H
9 
10 #define SRAM_BASE		0x40000000
11 
12 #include "ddr3_hws_hw_training_def.h"
13 
14 #define MV_XOR_MAX_UNIT		2	/* XOR unit == XOR engine */
15 #define MV_XOR_MAX_CHAN		4	/* total channels for all units */
16 #define MV_XOR_MAX_CHAN_PER_UNIT 2	/* channels for units */
17 
18 #define MV_IS_POWER_OF_2(num)	(((num) != 0) && (((num) & ((num) - 1)) == 0))
19 
20 /*
21  * This structure describes address space window. Window base can be
22  * 64 bit, window size up to 4GB
23  */
24 struct addr_win {
25 	u32 base_low;		/* 32bit base low       */
26 	u32 base_high;		/* 32bit base high      */
27 	u32 size;		/* 32bit size           */
28 };
29 
30 /* This structure describes SoC units address decode window	*/
31 struct unit_win_info {
32 	struct addr_win addr_win;	/* An address window */
33 	int enable;		/* Address decode window is enabled/disabled  */
34 	u8 attrib;		/* chip select attributes */
35 	u8 target_id;		/* Target Id of this MV_TARGET */
36 };
37 
38 /*
39  * This enumerator describes the type of functionality the XOR channel
40  * can have while using the same data structures.
41  */
42 enum xor_type {
43 	MV_XOR,			/* XOR channel functions as XOR accelerator   */
44 	MV_DMA,			/* XOR channel functions as IDMA channel      */
45 	MV_CRC32		/* XOR channel functions as CRC 32 calculator */
46 };
47 
48 enum mv_state {
49 	MV_IDLE,
50 	MV_ACTIVE,
51 	MV_PAUSED,
52 	MV_UNDEFINED_STATE
53 };
54 
55 /*
56  * This enumerator describes the set of commands that can be applied on
57  * an engine (e.g. IDMA, XOR). Appling a comman depends on the current
58  * status (see MV_STATE enumerator)
59  *
60  * Start can be applied only when status is IDLE
61  * Stop can be applied only when status is IDLE, ACTIVE or PAUSED
62  * Pause can be applied only when status is ACTIVE
63  * Restart can be applied only when status is PAUSED
64  */
65 enum mv_command {
66 	MV_START,		/* Start     */
67 	MV_STOP,		/* Stop     */
68 	MV_PAUSE,		/* Pause    */
69 	MV_RESTART		/* Restart  */
70 };
71 
72 enum xor_override_target {
73 	SRC_ADDR0,		/* Source Address #0 Control */
74 	SRC_ADDR1,		/* Source Address #1 Control */
75 	SRC_ADDR2,		/* Source Address #2 Control */
76 	SRC_ADDR3,		/* Source Address #3 Control */
77 	SRC_ADDR4,		/* Source Address #4 Control */
78 	SRC_ADDR5,		/* Source Address #5 Control */
79 	SRC_ADDR6,		/* Source Address #6 Control */
80 	SRC_ADDR7,		/* Source Address #7 Control */
81 	XOR_DST_ADDR,		/* Destination Address Control */
82 	XOR_NEXT_DESC		/* Next Descriptor Address Control */
83 };
84 
85 enum mv_state mv_xor_state_get(u32 chan);
86 void mv_xor_hal_init(u32 xor_chan_num);
87 int mv_xor_ctrl_set(u32 chan, u32 xor_ctrl);
88 int mv_xor_command_set(u32 chan, enum mv_command command);
89 int mv_xor_override_set(u32 chan, enum xor_override_target target, u32 win_num,
90 			int enable);
91 
92 #endif
93