xref: /openbmc/u-boot/drivers/ddr/marvell/a38x/ddr_ml_wrapper.h (revision 2b4ffbf6)

/* SPDX-License-Identifier: GPL-2.0 */
/*
 * Copyright (C) Marvell International Ltd. and its affiliates
 */

#ifndef _DDR_ML_WRAPPER_H
#define _DDR_ML_WRAPPER_H

#include <common.h>
#include <i2c.h>
#include <spl.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>

#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X)
#define INTER_REGS_BASE	SOC_REGS_PHY_BASE
#endif

/*
 * MV_DEBUG_INIT need to be defines, otherwise the output of the
 * DDR2 training code is not complete and misleading
 */
#define MV_DEBUG_INIT

#ifdef MV_DEBUG_INIT
#define DEBUG_INIT_S(s)			puts(s)
#define DEBUG_INIT_D(d, l)		printf("%x", d)
#define DEBUG_INIT_D_10(d, l)		printf("%d", d)
#else
#define DEBUG_INIT_S(s)
#define DEBUG_INIT_D(d, l)
#define DEBUG_INIT_D_10(d, l)
#endif

#ifdef MV_DEBUG_INIT_FULL
#define DEBUG_INIT_FULL_S(s)		puts(s)
#define DEBUG_INIT_FULL_D(d, l)		printf("%x", d)
#define DEBUG_INIT_FULL_D_10(d, l)	printf("%d", d)
#define DEBUG_WR_REG(reg, val) \
	{ DEBUG_INIT_S("Write Reg: 0x"); DEBUG_INIT_D((reg), 8); \
	  DEBUG_INIT_S("= "); DEBUG_INIT_D((val), 8); DEBUG_INIT_S("\n"); }
#define DEBUG_RD_REG(reg, val) \
	{ DEBUG_INIT_S("Read  Reg: 0x"); DEBUG_INIT_D((reg), 8); \
	  DEBUG_INIT_S("= "); DEBUG_INIT_D((val), 8); DEBUG_INIT_S("\n"); }
#else
#define DEBUG_INIT_FULL_S(s)
#define DEBUG_INIT_FULL_D(d, l)
#define DEBUG_INIT_FULL_D_10(d, l)
#define DEBUG_WR_REG(reg, val)
#define DEBUG_RD_REG(reg, val)
#endif

#define DEBUG_INIT_FULL_C(s, d, l)			\
	{ DEBUG_INIT_FULL_S(s);				\
	  DEBUG_INIT_FULL_D(d, l);			\
	  DEBUG_INIT_FULL_S("\n"); }
#define DEBUG_INIT_C(s, d, l) \
	{ DEBUG_INIT_S(s); DEBUG_INIT_D(d, l); DEBUG_INIT_S("\n"); }

/*
 * Debug (Enable/Disable modules) and Error report
 */

#ifdef BASIC_DEBUG
#define MV_DEBUG_WL
#define MV_DEBUG_RL
#define MV_DEBUG_DQS_RESULTS
#endif

#ifdef FULL_DEBUG
#define MV_DEBUG_WL
#define MV_DEBUG_RL
#define MV_DEBUG_DQS

#define MV_DEBUG_PBS
#define MV_DEBUG_DFS
#define MV_DEBUG_MAIN_FULL
#define MV_DEBUG_DFS_FULL
#define MV_DEBUG_DQS_FULL
#define MV_DEBUG_RL_FULL
#define MV_DEBUG_WL_FULL
#endif


/* The following is a list of Marvell status */
#define MV_ERROR	(-1)
#define MV_OK		(0x00)	/* Operation succeeded                   */
#define MV_FAIL		(0x01)	/* Operation failed                      */
#define MV_BAD_VALUE	(0x02)	/* Illegal value (general)               */
#define MV_OUT_OF_RANGE	(0x03)	/* The value is out of range             */
#define MV_BAD_PARAM	(0x04)	/* Illegal parameter in function called  */
#define MV_BAD_PTR	(0x05)	/* Illegal pointer value                 */
#define MV_BAD_SIZE	(0x06)	/* Illegal size                          */
#define MV_BAD_STATE	(0x07)	/* Illegal state of state machine        */
#define MV_SET_ERROR	(0x08)	/* Set operation failed                  */
#define MV_GET_ERROR	(0x09)	/* Get operation failed                  */
#define MV_CREATE_ERROR	(0x0a)	/* Fail while creating an item           */
#define MV_NOT_FOUND	(0x0b)	/* Item not found                        */
#define MV_NO_MORE	(0x0c)	/* No more items found                   */
#define MV_NO_SUCH	(0x0d)	/* No such item                          */
#define MV_TIMEOUT	(0x0e)	/* Time Out                              */
#define MV_NO_CHANGE	(0x0f)	/* Parameter(s) is already in this value */
#define MV_NOT_SUPPORTED (0x10)	/* This request is not support           */
#define MV_NOT_IMPLEMENTED (0x11) /* Request supported but not implemented*/
#define MV_NOT_INITIALIZED (0x12) /* The item is not initialized          */
#define MV_NO_RESOURCE	(0x13)	/* Resource not available (memory ...)   */
#define MV_FULL		(0x14)	/* Item is full (Queue or table etc...)  */
#define MV_EMPTY	(0x15)	/* Item is empty (Queue or table etc...) */
#define MV_INIT_ERROR	(0x16)	/* Error occured while INIT process      */
#define MV_HW_ERROR	(0x17)	/* Hardware error                        */
#define MV_TX_ERROR	(0x18)	/* Transmit operation not succeeded      */
#define MV_RX_ERROR	(0x19)	/* Recieve operation not succeeded       */
#define MV_NOT_READY	(0x1a)	/* The other side is not ready yet       */
#define MV_ALREADY_EXIST (0x1b)	/* Tried to create existing item         */
#define MV_OUT_OF_CPU_MEM   (0x1c) /* Cpu memory allocation failed.      */
#define MV_NOT_STARTED	(0x1d)	/* Not started yet                       */
#define MV_BUSY		(0x1e)	/* Item is busy.                         */
#define MV_TERMINATE	(0x1f)	/* Item terminates it's work.            */
#define MV_NOT_ALIGNED	(0x20)	/* Wrong alignment                       */
#define MV_NOT_ALLOWED	(0x21)	/* Operation NOT allowed                 */
#define MV_WRITE_PROTECT (0x22)	/* Write protected                       */
#define MV_INVALID	(int)(-1)

/*
 * Accessor functions for the registers
 */
static inline void reg_write(u32 addr, u32 val)
{
	writel(val, INTER_REGS_BASE + addr);
}

static inline u32 reg_read(u32 addr)
{
	return readl(INTER_REGS_BASE + addr);
}

static inline void reg_bit_set(u32 addr, u32 mask)
{
	setbits_le32(INTER_REGS_BASE + addr, mask);
}

static inline void reg_bit_clr(u32 addr, u32 mask)
{
	clrbits_le32(INTER_REGS_BASE + addr, mask);
}

#endif /* _DDR_ML_WRAPPER_H */