xref: /openbmc/u-boot/drivers/ddr/fsl/options.c (revision 8e0d51f8)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright 2008, 2010-2016 Freescale Semiconductor, Inc.
4  * Copyright 2017-2018 NXP Semiconductor
5  */
6 
7 #include <common.h>
8 #include <hwconfig.h>
9 #include <fsl_ddr_sdram.h>
10 
11 #include <fsl_ddr.h>
12 #if defined(CONFIG_FSL_LSCH2) || defined(CONFIG_FSL_LSCH3) || \
13 	defined(CONFIG_ARM)
14 #include <asm/arch/clock.h>
15 #endif
16 
17 /*
18  * Use our own stack based buffer before relocation to allow accessing longer
19  * hwconfig strings that might be in the environment before we've relocated.
20  * This is pretty fragile on both the use of stack and if the buffer is big
21  * enough. However we will get a warning from env_get_f() for the latter.
22  */
23 
24 /* Board-specific functions defined in each board's ddr.c */
25 extern void fsl_ddr_board_options(memctl_options_t *popts,
26 		dimm_params_t *pdimm,
27 		unsigned int ctrl_num);
28 
29 struct dynamic_odt {
30 	unsigned int odt_rd_cfg;
31 	unsigned int odt_wr_cfg;
32 	unsigned int odt_rtt_norm;
33 	unsigned int odt_rtt_wr;
34 };
35 
36 #ifdef CONFIG_SYS_FSL_DDR4
37 /* Quad rank is not verified yet due availability.
38  * Replacing 20 OHM with 34 OHM since DDR4 doesn't have 20 OHM option
39  */
40 static __maybe_unused const struct dynamic_odt single_Q[4] = {
41 	{	/* cs0 */
42 		FSL_DDR_ODT_NEVER,
43 		FSL_DDR_ODT_CS_AND_OTHER_DIMM,
44 		DDR4_RTT_34_OHM,	/* unverified */
45 		DDR4_RTT_120_OHM
46 	},
47 	{	/* cs1 */
48 		FSL_DDR_ODT_NEVER,
49 		FSL_DDR_ODT_NEVER,
50 		DDR4_RTT_OFF,
51 		DDR4_RTT_120_OHM
52 	},
53 	{	/* cs2 */
54 		FSL_DDR_ODT_NEVER,
55 		FSL_DDR_ODT_CS_AND_OTHER_DIMM,
56 		DDR4_RTT_34_OHM,
57 		DDR4_RTT_120_OHM
58 	},
59 	{	/* cs3 */
60 		FSL_DDR_ODT_NEVER,
61 		FSL_DDR_ODT_NEVER,	/* tied high */
62 		DDR4_RTT_OFF,
63 		DDR4_RTT_120_OHM
64 	}
65 };
66 
67 static __maybe_unused const struct dynamic_odt single_D[4] = {
68 	{	/* cs0 */
69 		FSL_DDR_ODT_NEVER,
70 		FSL_DDR_ODT_ALL,
71 		DDR4_RTT_40_OHM,
72 		DDR4_RTT_OFF
73 	},
74 	{	/* cs1 */
75 		FSL_DDR_ODT_NEVER,
76 		FSL_DDR_ODT_NEVER,
77 		DDR4_RTT_OFF,
78 		DDR4_RTT_OFF
79 	},
80 	{0, 0, 0, 0},
81 	{0, 0, 0, 0}
82 };
83 
84 static __maybe_unused const struct dynamic_odt single_S[4] = {
85 	{	/* cs0 */
86 		FSL_DDR_ODT_NEVER,
87 		FSL_DDR_ODT_ALL,
88 		DDR4_RTT_40_OHM,
89 		DDR4_RTT_OFF
90 	},
91 	{0, 0, 0, 0},
92 	{0, 0, 0, 0},
93 	{0, 0, 0, 0},
94 };
95 
96 static __maybe_unused const struct dynamic_odt dual_DD[4] = {
97 	{	/* cs0 */
98 		FSL_DDR_ODT_NEVER,
99 		FSL_DDR_ODT_SAME_DIMM,
100 		DDR4_RTT_120_OHM,
101 		DDR4_RTT_OFF
102 	},
103 	{	/* cs1 */
104 		FSL_DDR_ODT_OTHER_DIMM,
105 		FSL_DDR_ODT_OTHER_DIMM,
106 		DDR4_RTT_34_OHM,
107 		DDR4_RTT_OFF
108 	},
109 	{	/* cs2 */
110 		FSL_DDR_ODT_NEVER,
111 		FSL_DDR_ODT_SAME_DIMM,
112 		DDR4_RTT_120_OHM,
113 		DDR4_RTT_OFF
114 	},
115 	{	/* cs3 */
116 		FSL_DDR_ODT_OTHER_DIMM,
117 		FSL_DDR_ODT_OTHER_DIMM,
118 		DDR4_RTT_34_OHM,
119 		DDR4_RTT_OFF
120 	}
121 };
122 
123 static __maybe_unused const struct dynamic_odt dual_DS[4] = {
124 	{	/* cs0 */
125 		FSL_DDR_ODT_NEVER,
126 		FSL_DDR_ODT_SAME_DIMM,
127 		DDR4_RTT_120_OHM,
128 		DDR4_RTT_OFF
129 	},
130 	{	/* cs1 */
131 		FSL_DDR_ODT_OTHER_DIMM,
132 		FSL_DDR_ODT_OTHER_DIMM,
133 		DDR4_RTT_34_OHM,
134 		DDR4_RTT_OFF
135 	},
136 	{	/* cs2 */
137 		FSL_DDR_ODT_OTHER_DIMM,
138 		FSL_DDR_ODT_ALL,
139 		DDR4_RTT_34_OHM,
140 		DDR4_RTT_120_OHM
141 	},
142 	{0, 0, 0, 0}
143 };
144 static __maybe_unused const struct dynamic_odt dual_SD[4] = {
145 	{	/* cs0 */
146 		FSL_DDR_ODT_OTHER_DIMM,
147 		FSL_DDR_ODT_ALL,
148 		DDR4_RTT_34_OHM,
149 		DDR4_RTT_120_OHM
150 	},
151 	{0, 0, 0, 0},
152 	{	/* cs2 */
153 		FSL_DDR_ODT_NEVER,
154 		FSL_DDR_ODT_SAME_DIMM,
155 		DDR4_RTT_120_OHM,
156 		DDR4_RTT_OFF
157 	},
158 	{	/* cs3 */
159 		FSL_DDR_ODT_OTHER_DIMM,
160 		FSL_DDR_ODT_OTHER_DIMM,
161 		DDR4_RTT_34_OHM,
162 		DDR4_RTT_OFF
163 	}
164 };
165 
166 static __maybe_unused const struct dynamic_odt dual_SS[4] = {
167 	{	/* cs0 */
168 		FSL_DDR_ODT_OTHER_DIMM,
169 		FSL_DDR_ODT_ALL,
170 		DDR4_RTT_34_OHM,
171 		DDR4_RTT_120_OHM
172 	},
173 	{0, 0, 0, 0},
174 	{	/* cs2 */
175 		FSL_DDR_ODT_OTHER_DIMM,
176 		FSL_DDR_ODT_ALL,
177 		DDR4_RTT_34_OHM,
178 		DDR4_RTT_120_OHM
179 	},
180 	{0, 0, 0, 0}
181 };
182 
183 static __maybe_unused const struct dynamic_odt dual_D0[4] = {
184 	{	/* cs0 */
185 		FSL_DDR_ODT_NEVER,
186 		FSL_DDR_ODT_SAME_DIMM,
187 		DDR4_RTT_40_OHM,
188 		DDR4_RTT_OFF
189 	},
190 	{	/* cs1 */
191 		FSL_DDR_ODT_NEVER,
192 		FSL_DDR_ODT_NEVER,
193 		DDR4_RTT_OFF,
194 		DDR4_RTT_OFF
195 	},
196 	{0, 0, 0, 0},
197 	{0, 0, 0, 0}
198 };
199 
200 static __maybe_unused const struct dynamic_odt dual_0D[4] = {
201 	{0, 0, 0, 0},
202 	{0, 0, 0, 0},
203 	{	/* cs2 */
204 		FSL_DDR_ODT_NEVER,
205 		FSL_DDR_ODT_SAME_DIMM,
206 		DDR4_RTT_40_OHM,
207 		DDR4_RTT_OFF
208 	},
209 	{	/* cs3 */
210 		FSL_DDR_ODT_NEVER,
211 		FSL_DDR_ODT_NEVER,
212 		DDR4_RTT_OFF,
213 		DDR4_RTT_OFF
214 	}
215 };
216 
217 static __maybe_unused const struct dynamic_odt dual_S0[4] = {
218 	{	/* cs0 */
219 		FSL_DDR_ODT_NEVER,
220 		FSL_DDR_ODT_CS,
221 		DDR4_RTT_40_OHM,
222 		DDR4_RTT_OFF
223 	},
224 	{0, 0, 0, 0},
225 	{0, 0, 0, 0},
226 	{0, 0, 0, 0}
227 
228 };
229 
230 static __maybe_unused const struct dynamic_odt dual_0S[4] = {
231 	{0, 0, 0, 0},
232 	{0, 0, 0, 0},
233 	{	/* cs2 */
234 		FSL_DDR_ODT_NEVER,
235 		FSL_DDR_ODT_CS,
236 		DDR4_RTT_40_OHM,
237 		DDR4_RTT_OFF
238 	},
239 	{0, 0, 0, 0}
240 
241 };
242 
243 static __maybe_unused const struct dynamic_odt odt_unknown[4] = {
244 	{	/* cs0 */
245 		FSL_DDR_ODT_NEVER,
246 		FSL_DDR_ODT_CS,
247 		DDR4_RTT_120_OHM,
248 		DDR4_RTT_OFF
249 	},
250 	{	/* cs1 */
251 		FSL_DDR_ODT_NEVER,
252 		FSL_DDR_ODT_CS,
253 		DDR4_RTT_120_OHM,
254 		DDR4_RTT_OFF
255 	},
256 	{	/* cs2 */
257 		FSL_DDR_ODT_NEVER,
258 		FSL_DDR_ODT_CS,
259 		DDR4_RTT_120_OHM,
260 		DDR4_RTT_OFF
261 	},
262 	{	/* cs3 */
263 		FSL_DDR_ODT_NEVER,
264 		FSL_DDR_ODT_CS,
265 		DDR4_RTT_120_OHM,
266 		DDR4_RTT_OFF
267 	}
268 };
269 #elif defined(CONFIG_SYS_FSL_DDR3)
270 static __maybe_unused const struct dynamic_odt single_Q[4] = {
271 	{	/* cs0 */
272 		FSL_DDR_ODT_NEVER,
273 		FSL_DDR_ODT_CS_AND_OTHER_DIMM,
274 		DDR3_RTT_20_OHM,
275 		DDR3_RTT_120_OHM
276 	},
277 	{	/* cs1 */
278 		FSL_DDR_ODT_NEVER,
279 		FSL_DDR_ODT_NEVER,	/* tied high */
280 		DDR3_RTT_OFF,
281 		DDR3_RTT_120_OHM
282 	},
283 	{	/* cs2 */
284 		FSL_DDR_ODT_NEVER,
285 		FSL_DDR_ODT_CS_AND_OTHER_DIMM,
286 		DDR3_RTT_20_OHM,
287 		DDR3_RTT_120_OHM
288 	},
289 	{	/* cs3 */
290 		FSL_DDR_ODT_NEVER,
291 		FSL_DDR_ODT_NEVER,	/* tied high */
292 		DDR3_RTT_OFF,
293 		DDR3_RTT_120_OHM
294 	}
295 };
296 
297 static __maybe_unused const struct dynamic_odt single_D[4] = {
298 	{	/* cs0 */
299 		FSL_DDR_ODT_NEVER,
300 		FSL_DDR_ODT_ALL,
301 		DDR3_RTT_40_OHM,
302 		DDR3_RTT_OFF
303 	},
304 	{	/* cs1 */
305 		FSL_DDR_ODT_NEVER,
306 		FSL_DDR_ODT_NEVER,
307 		DDR3_RTT_OFF,
308 		DDR3_RTT_OFF
309 	},
310 	{0, 0, 0, 0},
311 	{0, 0, 0, 0}
312 };
313 
314 static __maybe_unused const struct dynamic_odt single_S[4] = {
315 	{	/* cs0 */
316 		FSL_DDR_ODT_NEVER,
317 		FSL_DDR_ODT_ALL,
318 		DDR3_RTT_40_OHM,
319 		DDR3_RTT_OFF
320 	},
321 	{0, 0, 0, 0},
322 	{0, 0, 0, 0},
323 	{0, 0, 0, 0},
324 };
325 
326 static __maybe_unused const struct dynamic_odt dual_DD[4] = {
327 	{	/* cs0 */
328 		FSL_DDR_ODT_NEVER,
329 		FSL_DDR_ODT_SAME_DIMM,
330 		DDR3_RTT_120_OHM,
331 		DDR3_RTT_OFF
332 	},
333 	{	/* cs1 */
334 		FSL_DDR_ODT_OTHER_DIMM,
335 		FSL_DDR_ODT_OTHER_DIMM,
336 		DDR3_RTT_30_OHM,
337 		DDR3_RTT_OFF
338 	},
339 	{	/* cs2 */
340 		FSL_DDR_ODT_NEVER,
341 		FSL_DDR_ODT_SAME_DIMM,
342 		DDR3_RTT_120_OHM,
343 		DDR3_RTT_OFF
344 	},
345 	{	/* cs3 */
346 		FSL_DDR_ODT_OTHER_DIMM,
347 		FSL_DDR_ODT_OTHER_DIMM,
348 		DDR3_RTT_30_OHM,
349 		DDR3_RTT_OFF
350 	}
351 };
352 
353 static __maybe_unused const struct dynamic_odt dual_DS[4] = {
354 	{	/* cs0 */
355 		FSL_DDR_ODT_NEVER,
356 		FSL_DDR_ODT_SAME_DIMM,
357 		DDR3_RTT_120_OHM,
358 		DDR3_RTT_OFF
359 	},
360 	{	/* cs1 */
361 		FSL_DDR_ODT_OTHER_DIMM,
362 		FSL_DDR_ODT_OTHER_DIMM,
363 		DDR3_RTT_30_OHM,
364 		DDR3_RTT_OFF
365 	},
366 	{	/* cs2 */
367 		FSL_DDR_ODT_OTHER_DIMM,
368 		FSL_DDR_ODT_ALL,
369 		DDR3_RTT_20_OHM,
370 		DDR3_RTT_120_OHM
371 	},
372 	{0, 0, 0, 0}
373 };
374 static __maybe_unused const struct dynamic_odt dual_SD[4] = {
375 	{	/* cs0 */
376 		FSL_DDR_ODT_OTHER_DIMM,
377 		FSL_DDR_ODT_ALL,
378 		DDR3_RTT_20_OHM,
379 		DDR3_RTT_120_OHM
380 	},
381 	{0, 0, 0, 0},
382 	{	/* cs2 */
383 		FSL_DDR_ODT_NEVER,
384 		FSL_DDR_ODT_SAME_DIMM,
385 		DDR3_RTT_120_OHM,
386 		DDR3_RTT_OFF
387 	},
388 	{	/* cs3 */
389 		FSL_DDR_ODT_OTHER_DIMM,
390 		FSL_DDR_ODT_OTHER_DIMM,
391 		DDR3_RTT_20_OHM,
392 		DDR3_RTT_OFF
393 	}
394 };
395 
396 static __maybe_unused const struct dynamic_odt dual_SS[4] = {
397 	{	/* cs0 */
398 		FSL_DDR_ODT_OTHER_DIMM,
399 		FSL_DDR_ODT_ALL,
400 		DDR3_RTT_30_OHM,
401 		DDR3_RTT_120_OHM
402 	},
403 	{0, 0, 0, 0},
404 	{	/* cs2 */
405 		FSL_DDR_ODT_OTHER_DIMM,
406 		FSL_DDR_ODT_ALL,
407 		DDR3_RTT_30_OHM,
408 		DDR3_RTT_120_OHM
409 	},
410 	{0, 0, 0, 0}
411 };
412 
413 static __maybe_unused const struct dynamic_odt dual_D0[4] = {
414 	{	/* cs0 */
415 		FSL_DDR_ODT_NEVER,
416 		FSL_DDR_ODT_SAME_DIMM,
417 		DDR3_RTT_40_OHM,
418 		DDR3_RTT_OFF
419 	},
420 	{	/* cs1 */
421 		FSL_DDR_ODT_NEVER,
422 		FSL_DDR_ODT_NEVER,
423 		DDR3_RTT_OFF,
424 		DDR3_RTT_OFF
425 	},
426 	{0, 0, 0, 0},
427 	{0, 0, 0, 0}
428 };
429 
430 static __maybe_unused const struct dynamic_odt dual_0D[4] = {
431 	{0, 0, 0, 0},
432 	{0, 0, 0, 0},
433 	{	/* cs2 */
434 		FSL_DDR_ODT_NEVER,
435 		FSL_DDR_ODT_SAME_DIMM,
436 		DDR3_RTT_40_OHM,
437 		DDR3_RTT_OFF
438 	},
439 	{	/* cs3 */
440 		FSL_DDR_ODT_NEVER,
441 		FSL_DDR_ODT_NEVER,
442 		DDR3_RTT_OFF,
443 		DDR3_RTT_OFF
444 	}
445 };
446 
447 static __maybe_unused const struct dynamic_odt dual_S0[4] = {
448 	{	/* cs0 */
449 		FSL_DDR_ODT_NEVER,
450 		FSL_DDR_ODT_CS,
451 		DDR3_RTT_40_OHM,
452 		DDR3_RTT_OFF
453 	},
454 	{0, 0, 0, 0},
455 	{0, 0, 0, 0},
456 	{0, 0, 0, 0}
457 
458 };
459 
460 static __maybe_unused const struct dynamic_odt dual_0S[4] = {
461 	{0, 0, 0, 0},
462 	{0, 0, 0, 0},
463 	{	/* cs2 */
464 		FSL_DDR_ODT_NEVER,
465 		FSL_DDR_ODT_CS,
466 		DDR3_RTT_40_OHM,
467 		DDR3_RTT_OFF
468 	},
469 	{0, 0, 0, 0}
470 
471 };
472 
473 static __maybe_unused const struct dynamic_odt odt_unknown[4] = {
474 	{	/* cs0 */
475 		FSL_DDR_ODT_NEVER,
476 		FSL_DDR_ODT_CS,
477 		DDR3_RTT_120_OHM,
478 		DDR3_RTT_OFF
479 	},
480 	{	/* cs1 */
481 		FSL_DDR_ODT_NEVER,
482 		FSL_DDR_ODT_CS,
483 		DDR3_RTT_120_OHM,
484 		DDR3_RTT_OFF
485 	},
486 	{	/* cs2 */
487 		FSL_DDR_ODT_NEVER,
488 		FSL_DDR_ODT_CS,
489 		DDR3_RTT_120_OHM,
490 		DDR3_RTT_OFF
491 	},
492 	{	/* cs3 */
493 		FSL_DDR_ODT_NEVER,
494 		FSL_DDR_ODT_CS,
495 		DDR3_RTT_120_OHM,
496 		DDR3_RTT_OFF
497 	}
498 };
499 #else	/* CONFIG_SYS_FSL_DDR3 */
500 static __maybe_unused const struct dynamic_odt single_Q[4] = {
501 	{0, 0, 0, 0},
502 	{0, 0, 0, 0},
503 	{0, 0, 0, 0},
504 	{0, 0, 0, 0}
505 };
506 
507 static __maybe_unused const struct dynamic_odt single_D[4] = {
508 	{	/* cs0 */
509 		FSL_DDR_ODT_NEVER,
510 		FSL_DDR_ODT_ALL,
511 		DDR2_RTT_150_OHM,
512 		DDR2_RTT_OFF
513 	},
514 	{	/* cs1 */
515 		FSL_DDR_ODT_NEVER,
516 		FSL_DDR_ODT_NEVER,
517 		DDR2_RTT_OFF,
518 		DDR2_RTT_OFF
519 	},
520 	{0, 0, 0, 0},
521 	{0, 0, 0, 0}
522 };
523 
524 static __maybe_unused const struct dynamic_odt single_S[4] = {
525 	{	/* cs0 */
526 		FSL_DDR_ODT_NEVER,
527 		FSL_DDR_ODT_ALL,
528 		DDR2_RTT_150_OHM,
529 		DDR2_RTT_OFF
530 	},
531 	{0, 0, 0, 0},
532 	{0, 0, 0, 0},
533 	{0, 0, 0, 0},
534 };
535 
536 static __maybe_unused const struct dynamic_odt dual_DD[4] = {
537 	{	/* cs0 */
538 		FSL_DDR_ODT_OTHER_DIMM,
539 		FSL_DDR_ODT_OTHER_DIMM,
540 		DDR2_RTT_75_OHM,
541 		DDR2_RTT_OFF
542 	},
543 	{	/* cs1 */
544 		FSL_DDR_ODT_NEVER,
545 		FSL_DDR_ODT_NEVER,
546 		DDR2_RTT_OFF,
547 		DDR2_RTT_OFF
548 	},
549 	{	/* cs2 */
550 		FSL_DDR_ODT_OTHER_DIMM,
551 		FSL_DDR_ODT_OTHER_DIMM,
552 		DDR2_RTT_75_OHM,
553 		DDR2_RTT_OFF
554 	},
555 	{	/* cs3 */
556 		FSL_DDR_ODT_NEVER,
557 		FSL_DDR_ODT_NEVER,
558 		DDR2_RTT_OFF,
559 		DDR2_RTT_OFF
560 	}
561 };
562 
563 static __maybe_unused const struct dynamic_odt dual_DS[4] = {
564 	{	/* cs0 */
565 		FSL_DDR_ODT_OTHER_DIMM,
566 		FSL_DDR_ODT_OTHER_DIMM,
567 		DDR2_RTT_75_OHM,
568 		DDR2_RTT_OFF
569 	},
570 	{	/* cs1 */
571 		FSL_DDR_ODT_NEVER,
572 		FSL_DDR_ODT_NEVER,
573 		DDR2_RTT_OFF,
574 		DDR2_RTT_OFF
575 	},
576 	{	/* cs2 */
577 		FSL_DDR_ODT_OTHER_DIMM,
578 		FSL_DDR_ODT_OTHER_DIMM,
579 		DDR2_RTT_75_OHM,
580 		DDR2_RTT_OFF
581 	},
582 	{0, 0, 0, 0}
583 };
584 
585 static __maybe_unused const struct dynamic_odt dual_SD[4] = {
586 	{	/* cs0 */
587 		FSL_DDR_ODT_OTHER_DIMM,
588 		FSL_DDR_ODT_OTHER_DIMM,
589 		DDR2_RTT_75_OHM,
590 		DDR2_RTT_OFF
591 	},
592 	{0, 0, 0, 0},
593 	{	/* cs2 */
594 		FSL_DDR_ODT_OTHER_DIMM,
595 		FSL_DDR_ODT_OTHER_DIMM,
596 		DDR2_RTT_75_OHM,
597 		DDR2_RTT_OFF
598 	},
599 	{	/* cs3 */
600 		FSL_DDR_ODT_NEVER,
601 		FSL_DDR_ODT_NEVER,
602 		DDR2_RTT_OFF,
603 		DDR2_RTT_OFF
604 	}
605 };
606 
607 static __maybe_unused const struct dynamic_odt dual_SS[4] = {
608 	{	/* cs0 */
609 		FSL_DDR_ODT_OTHER_DIMM,
610 		FSL_DDR_ODT_OTHER_DIMM,
611 		DDR2_RTT_75_OHM,
612 		DDR2_RTT_OFF
613 	},
614 	{0, 0, 0, 0},
615 	{	/* cs2 */
616 		FSL_DDR_ODT_OTHER_DIMM,
617 		FSL_DDR_ODT_OTHER_DIMM,
618 		DDR2_RTT_75_OHM,
619 		DDR2_RTT_OFF
620 	},
621 	{0, 0, 0, 0}
622 };
623 
624 static __maybe_unused const struct dynamic_odt dual_D0[4] = {
625 	{	/* cs0 */
626 		FSL_DDR_ODT_NEVER,
627 		FSL_DDR_ODT_ALL,
628 		DDR2_RTT_150_OHM,
629 		DDR2_RTT_OFF
630 	},
631 	{	/* cs1 */
632 		FSL_DDR_ODT_NEVER,
633 		FSL_DDR_ODT_NEVER,
634 		DDR2_RTT_OFF,
635 		DDR2_RTT_OFF
636 	},
637 	{0, 0, 0, 0},
638 	{0, 0, 0, 0}
639 };
640 
641 static __maybe_unused const struct dynamic_odt dual_0D[4] = {
642 	{0, 0, 0, 0},
643 	{0, 0, 0, 0},
644 	{	/* cs2 */
645 		FSL_DDR_ODT_NEVER,
646 		FSL_DDR_ODT_ALL,
647 		DDR2_RTT_150_OHM,
648 		DDR2_RTT_OFF
649 	},
650 	{	/* cs3 */
651 		FSL_DDR_ODT_NEVER,
652 		FSL_DDR_ODT_NEVER,
653 		DDR2_RTT_OFF,
654 		DDR2_RTT_OFF
655 	}
656 };
657 
658 static __maybe_unused const struct dynamic_odt dual_S0[4] = {
659 	{	/* cs0 */
660 		FSL_DDR_ODT_NEVER,
661 		FSL_DDR_ODT_CS,
662 		DDR2_RTT_150_OHM,
663 		DDR2_RTT_OFF
664 	},
665 	{0, 0, 0, 0},
666 	{0, 0, 0, 0},
667 	{0, 0, 0, 0}
668 
669 };
670 
671 static __maybe_unused const struct dynamic_odt dual_0S[4] = {
672 	{0, 0, 0, 0},
673 	{0, 0, 0, 0},
674 	{	/* cs2 */
675 		FSL_DDR_ODT_NEVER,
676 		FSL_DDR_ODT_CS,
677 		DDR2_RTT_150_OHM,
678 		DDR2_RTT_OFF
679 	},
680 	{0, 0, 0, 0}
681 
682 };
683 
684 static __maybe_unused const struct dynamic_odt odt_unknown[4] = {
685 	{	/* cs0 */
686 		FSL_DDR_ODT_NEVER,
687 		FSL_DDR_ODT_CS,
688 		DDR2_RTT_75_OHM,
689 		DDR2_RTT_OFF
690 	},
691 	{	/* cs1 */
692 		FSL_DDR_ODT_NEVER,
693 		FSL_DDR_ODT_NEVER,
694 		DDR2_RTT_OFF,
695 		DDR2_RTT_OFF
696 	},
697 	{	/* cs2 */
698 		FSL_DDR_ODT_NEVER,
699 		FSL_DDR_ODT_CS,
700 		DDR2_RTT_75_OHM,
701 		DDR2_RTT_OFF
702 	},
703 	{	/* cs3 */
704 		FSL_DDR_ODT_NEVER,
705 		FSL_DDR_ODT_NEVER,
706 		DDR2_RTT_OFF,
707 		DDR2_RTT_OFF
708 	}
709 };
710 #endif
711 
712 /*
713  * Automatically seleect bank interleaving mode based on DIMMs
714  * in this order: cs0_cs1_cs2_cs3, cs0_cs1, null.
715  * This function only deal with one or two slots per controller.
716  */
717 static inline unsigned int auto_bank_intlv(dimm_params_t *pdimm)
718 {
719 #if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
720 	if (pdimm[0].n_ranks == 4)
721 		return FSL_DDR_CS0_CS1_CS2_CS3;
722 	else if (pdimm[0].n_ranks == 2)
723 		return FSL_DDR_CS0_CS1;
724 #elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
725 #ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
726 	if (pdimm[0].n_ranks == 4)
727 		return FSL_DDR_CS0_CS1_CS2_CS3;
728 #endif
729 	if (pdimm[0].n_ranks == 2) {
730 		if (pdimm[1].n_ranks == 2)
731 			return FSL_DDR_CS0_CS1_CS2_CS3;
732 		else
733 			return FSL_DDR_CS0_CS1;
734 	}
735 #endif
736 	return 0;
737 }
738 
739 unsigned int populate_memctl_options(const common_timing_params_t *common_dimm,
740 			memctl_options_t *popts,
741 			dimm_params_t *pdimm,
742 			unsigned int ctrl_num)
743 {
744 	unsigned int i;
745 	char buf[HWCONFIG_BUFFER_SIZE];
746 #if defined(CONFIG_SYS_FSL_DDR3) || \
747 	defined(CONFIG_SYS_FSL_DDR2) || \
748 	defined(CONFIG_SYS_FSL_DDR4)
749 	const struct dynamic_odt *pdodt = odt_unknown;
750 #endif
751 #if (CONFIG_FSL_SDRAM_TYPE != SDRAM_TYPE_DDR4)
752 	ulong ddr_freq;
753 #endif
754 
755 	/*
756 	 * Extract hwconfig from environment since we have not properly setup
757 	 * the environment but need it for ddr config params
758 	 */
759 	if (env_get_f("hwconfig", buf, sizeof(buf)) < 0)
760 		buf[0] = '\0';
761 
762 #if defined(CONFIG_SYS_FSL_DDR3) || \
763 	defined(CONFIG_SYS_FSL_DDR2) || \
764 	defined(CONFIG_SYS_FSL_DDR4)
765 	/* Chip select options. */
766 #if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
767 	switch (pdimm[0].n_ranks) {
768 	case 1:
769 		pdodt = single_S;
770 		break;
771 	case 2:
772 		pdodt = single_D;
773 		break;
774 	case 4:
775 		pdodt = single_Q;
776 		break;
777 	}
778 #elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
779 	switch (pdimm[0].n_ranks) {
780 #ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
781 	case 4:
782 		pdodt = single_Q;
783 		if (pdimm[1].n_ranks)
784 			printf("Error: Quad- and Dual-rank DIMMs cannot be used together\n");
785 		break;
786 #endif
787 	case 2:
788 		switch (pdimm[1].n_ranks) {
789 		case 2:
790 			pdodt = dual_DD;
791 			break;
792 		case 1:
793 			pdodt = dual_DS;
794 			break;
795 		case 0:
796 			pdodt = dual_D0;
797 			break;
798 		}
799 		break;
800 	case 1:
801 		switch (pdimm[1].n_ranks) {
802 		case 2:
803 			pdodt = dual_SD;
804 			break;
805 		case 1:
806 			pdodt = dual_SS;
807 			break;
808 		case 0:
809 			pdodt = dual_S0;
810 			break;
811 		}
812 		break;
813 	case 0:
814 		switch (pdimm[1].n_ranks) {
815 		case 2:
816 			pdodt = dual_0D;
817 			break;
818 		case 1:
819 			pdodt = dual_0S;
820 			break;
821 		}
822 		break;
823 	}
824 #endif	/* CONFIG_DIMM_SLOTS_PER_CTLR */
825 #endif	/* CONFIG_SYS_FSL_DDR2, 3, 4 */
826 
827 	/* Pick chip-select local options. */
828 	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
829 #if defined(CONFIG_SYS_FSL_DDR3) || \
830 	defined(CONFIG_SYS_FSL_DDR2) || \
831 	defined(CONFIG_SYS_FSL_DDR4)
832 		popts->cs_local_opts[i].odt_rd_cfg = pdodt[i].odt_rd_cfg;
833 		popts->cs_local_opts[i].odt_wr_cfg = pdodt[i].odt_wr_cfg;
834 		popts->cs_local_opts[i].odt_rtt_norm = pdodt[i].odt_rtt_norm;
835 		popts->cs_local_opts[i].odt_rtt_wr = pdodt[i].odt_rtt_wr;
836 #else
837 		popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
838 		popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
839 #endif
840 		popts->cs_local_opts[i].auto_precharge = 0;
841 	}
842 
843 	/* Pick interleaving mode. */
844 
845 	/*
846 	 * 0 = no interleaving
847 	 * 1 = interleaving between 2 controllers
848 	 */
849 	popts->memctl_interleaving = 0;
850 
851 	/*
852 	 * 0 = cacheline
853 	 * 1 = page
854 	 * 2 = (logical) bank
855 	 * 3 = superbank (only if CS interleaving is enabled)
856 	 */
857 	popts->memctl_interleaving_mode = 0;
858 
859 	/*
860 	 * 0: cacheline: bit 30 of the 36-bit physical addr selects the memctl
861 	 * 1: page:      bit to the left of the column bits selects the memctl
862 	 * 2: bank:      bit to the left of the bank bits selects the memctl
863 	 * 3: superbank: bit to the left of the chip select selects the memctl
864 	 *
865 	 * NOTE: ba_intlv (rank interleaving) is independent of memory
866 	 * controller interleaving; it is only within a memory controller.
867 	 * Must use superbank interleaving if rank interleaving is used and
868 	 * memory controller interleaving is enabled.
869 	 */
870 
871 	/*
872 	 * 0 = no
873 	 * 0x40 = CS0,CS1
874 	 * 0x20 = CS2,CS3
875 	 * 0x60 = CS0,CS1 + CS2,CS3
876 	 * 0x04 = CS0,CS1,CS2,CS3
877 	 */
878 	popts->ba_intlv_ctl = 0;
879 
880 	/* Memory Organization Parameters */
881 	popts->registered_dimm_en = common_dimm->all_dimms_registered;
882 
883 	/* Operational Mode Paramters */
884 
885 	/* Pick ECC modes */
886 	popts->ecc_mode = 0;		  /* 0 = disabled, 1 = enabled */
887 #ifdef CONFIG_DDR_ECC
888 	if (hwconfig_sub_f("fsl_ddr", "ecc", buf)) {
889 		if (hwconfig_subarg_cmp_f("fsl_ddr", "ecc", "on", buf))
890 			popts->ecc_mode = 1;
891 	} else
892 		popts->ecc_mode = 1;
893 #endif
894 	/* 1 = use memory controler to init data */
895 	popts->ecc_init_using_memctl = popts->ecc_mode ? 1 : 0;
896 
897 	/*
898 	 * Choose DQS config
899 	 * 0 for DDR1
900 	 * 1 for DDR2
901 	 */
902 #if defined(CONFIG_SYS_FSL_DDR1)
903 	popts->dqs_config = 0;
904 #elif defined(CONFIG_SYS_FSL_DDR2) || defined(CONFIG_SYS_FSL_DDR3)
905 	popts->dqs_config = 1;
906 #endif
907 
908 	/* Choose self-refresh during sleep. */
909 	popts->self_refresh_in_sleep = 1;
910 
911 	/* Choose dynamic power management mode. */
912 	popts->dynamic_power = 0;
913 
914 	/*
915 	 * check first dimm for primary sdram width
916 	 * presuming all dimms are similar
917 	 * 0 = 64-bit, 1 = 32-bit, 2 = 16-bit
918 	 */
919 #if defined(CONFIG_SYS_FSL_DDR1) || defined(CONFIG_SYS_FSL_DDR2)
920 	if (pdimm[0].n_ranks != 0) {
921 		if ((pdimm[0].data_width >= 64) && \
922 			(pdimm[0].data_width <= 72))
923 			popts->data_bus_width = 0;
924 		else if ((pdimm[0].data_width >= 32) && \
925 			(pdimm[0].data_width <= 40))
926 			popts->data_bus_width = 1;
927 		else {
928 			panic("Error: data width %u is invalid!\n",
929 				pdimm[0].data_width);
930 		}
931 	}
932 #else
933 	if (pdimm[0].n_ranks != 0) {
934 		if (pdimm[0].primary_sdram_width == 64)
935 			popts->data_bus_width = 0;
936 		else if (pdimm[0].primary_sdram_width == 32)
937 			popts->data_bus_width = 1;
938 		else if (pdimm[0].primary_sdram_width == 16)
939 			popts->data_bus_width = 2;
940 		else {
941 			panic("Error: primary sdram width %u is invalid!\n",
942 				pdimm[0].primary_sdram_width);
943 		}
944 	}
945 #endif
946 
947 	popts->x4_en = (pdimm[0].device_width == 4) ? 1 : 0;
948 
949 	/* Choose burst length. */
950 #if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4)
951 #if defined(CONFIG_E500MC)
952 	popts->otf_burst_chop_en = 0;	/* on-the-fly burst chop disable */
953 	popts->burst_length = DDR_BL8;	/* Fixed 8-beat burst len */
954 #else
955 	if ((popts->data_bus_width == 1) || (popts->data_bus_width == 2)) {
956 		/* 32-bit or 16-bit bus */
957 		popts->otf_burst_chop_en = 0;
958 		popts->burst_length = DDR_BL8;
959 	} else {
960 		popts->otf_burst_chop_en = 1;	/* on-the-fly burst chop */
961 		popts->burst_length = DDR_OTF;	/* on-the-fly BC4 and BL8 */
962 	}
963 #endif
964 #else
965 	popts->burst_length = DDR_BL4;	/* has to be 4 for DDR2 */
966 #endif
967 
968 	/* Choose ddr controller address mirror mode */
969 #if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4)
970 	for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
971 		if (pdimm[i].n_ranks) {
972 			popts->mirrored_dimm = pdimm[i].mirrored_dimm;
973 			break;
974 		}
975 	}
976 #endif
977 
978 	/* Global Timing Parameters. */
979 	debug("mclk_ps = %u ps\n", get_memory_clk_period_ps(ctrl_num));
980 
981 	/* Pick a caslat override. */
982 	popts->cas_latency_override = 0;
983 	popts->cas_latency_override_value = 3;
984 	if (popts->cas_latency_override) {
985 		debug("using caslat override value = %u\n",
986 		       popts->cas_latency_override_value);
987 	}
988 
989 	/* Decide whether to use the computed derated latency */
990 	popts->use_derated_caslat = 0;
991 
992 	/* Choose an additive latency. */
993 	popts->additive_latency_override = 0;
994 	popts->additive_latency_override_value = 3;
995 	if (popts->additive_latency_override) {
996 		debug("using additive latency override value = %u\n",
997 		       popts->additive_latency_override_value);
998 	}
999 
1000 	/*
1001 	 * 2T_EN setting
1002 	 *
1003 	 * Factors to consider for 2T_EN:
1004 	 *	- number of DIMMs installed
1005 	 *	- number of components, number of active ranks
1006 	 *	- how much time you want to spend playing around
1007 	 */
1008 	popts->twot_en = 0;
1009 	popts->threet_en = 0;
1010 
1011 	/* for RDIMM and DDR4 UDIMM/discrete memory, address parity enable */
1012 	if (popts->registered_dimm_en)
1013 		popts->ap_en = 1; /* 0 = disable,  1 = enable */
1014 	else
1015 		popts->ap_en = 0; /* disabled for DDR4 UDIMM/discrete default */
1016 
1017 	if (hwconfig_sub_f("fsl_ddr", "parity", buf)) {
1018 		if (hwconfig_subarg_cmp_f("fsl_ddr", "parity", "on", buf)) {
1019 			if (popts->registered_dimm_en ||
1020 			    (CONFIG_FSL_SDRAM_TYPE == SDRAM_TYPE_DDR4))
1021 				popts->ap_en = 1;
1022 		}
1023 	}
1024 
1025 	/*
1026 	 * BSTTOPRE precharge interval
1027 	 *
1028 	 * Set this to 0 for global auto precharge
1029 	 * The value of 0x100 has been used for DDR1, DDR2, DDR3.
1030 	 * It is not wrong. Any value should be OK. The performance depends on
1031 	 * applications. There is no one good value for all. One way to set
1032 	 * is to use 1/4 of refint value.
1033 	 */
1034 	popts->bstopre = picos_to_mclk(ctrl_num, common_dimm->refresh_rate_ps)
1035 			 >> 2;
1036 
1037 	/*
1038 	 * Window for four activates -- tFAW
1039 	 *
1040 	 * FIXME: UM: applies only to DDR2/DDR3 with eight logical banks only
1041 	 * FIXME: varies depending upon number of column addresses or data
1042 	 * FIXME: width, was considering looking at pdimm->primary_sdram_width
1043 	 */
1044 #if defined(CONFIG_SYS_FSL_DDR1)
1045 	popts->tfaw_window_four_activates_ps = mclk_to_picos(ctrl_num, 1);
1046 
1047 #elif defined(CONFIG_SYS_FSL_DDR2)
1048 	/*
1049 	 * x4/x8;  some datasheets have 35000
1050 	 * x16 wide columns only?  Use 50000?
1051 	 */
1052 	popts->tfaw_window_four_activates_ps = 37500;
1053 
1054 #else
1055 	popts->tfaw_window_four_activates_ps = pdimm[0].tfaw_ps;
1056 #endif
1057 	popts->zq_en = 0;
1058 	popts->wrlvl_en = 0;
1059 #if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4)
1060 	/*
1061 	 * due to ddr3 dimm is fly-by topology
1062 	 * we suggest to enable write leveling to
1063 	 * meet the tQDSS under different loading.
1064 	 */
1065 	popts->wrlvl_en = 1;
1066 	popts->zq_en = 1;
1067 	popts->wrlvl_override = 0;
1068 #endif
1069 
1070 	/*
1071 	 * Check interleaving configuration from environment.
1072 	 * Please refer to doc/README.fsl-ddr for the detail.
1073 	 *
1074 	 * If memory controller interleaving is enabled, then the data
1075 	 * bus widths must be programmed identically for all memory controllers.
1076 	 *
1077 	 * Attempt to set all controllers to the same chip select
1078 	 * interleaving mode. It will do a best effort to get the
1079 	 * requested ranks interleaved together such that the result
1080 	 * should be a subset of the requested configuration.
1081 	 *
1082 	 * if CONFIG_SYS_FSL_DDR_INTLV_256B is defined, mandatory interleaving
1083 	 * with 256 Byte is enabled.
1084 	 */
1085 #if (CONFIG_SYS_NUM_DDR_CTLRS > 1)
1086 	if (!hwconfig_sub_f("fsl_ddr", "ctlr_intlv", buf))
1087 #ifdef CONFIG_SYS_FSL_DDR_INTLV_256B
1088 		;
1089 #else
1090 		goto done;
1091 #endif
1092 	if (pdimm[0].n_ranks == 0) {
1093 		printf("There is no rank on CS0 for controller %d.\n", ctrl_num);
1094 		popts->memctl_interleaving = 0;
1095 		goto done;
1096 	}
1097 	popts->memctl_interleaving = 1;
1098 #ifdef CONFIG_SYS_FSL_DDR_INTLV_256B
1099 	popts->memctl_interleaving_mode = FSL_DDR_256B_INTERLEAVING;
1100 	popts->memctl_interleaving = 1;
1101 	debug("256 Byte interleaving\n");
1102 #else
1103 	/*
1104 	 * test null first. if CONFIG_HWCONFIG is not defined
1105 	 * hwconfig_arg_cmp returns non-zero
1106 	 */
1107 	if (hwconfig_subarg_cmp_f("fsl_ddr", "ctlr_intlv",
1108 				    "null", buf)) {
1109 		popts->memctl_interleaving = 0;
1110 		debug("memory controller interleaving disabled.\n");
1111 	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
1112 					"ctlr_intlv",
1113 					"cacheline", buf)) {
1114 		popts->memctl_interleaving_mode =
1115 			((CONFIG_SYS_NUM_DDR_CTLRS == 3) && ctrl_num == 2) ?
1116 			0 : FSL_DDR_CACHE_LINE_INTERLEAVING;
1117 		popts->memctl_interleaving =
1118 			((CONFIG_SYS_NUM_DDR_CTLRS == 3) && ctrl_num == 2) ?
1119 			0 : 1;
1120 	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
1121 					"ctlr_intlv",
1122 					"page", buf)) {
1123 		popts->memctl_interleaving_mode =
1124 			((CONFIG_SYS_NUM_DDR_CTLRS == 3) && ctrl_num == 2) ?
1125 			0 : FSL_DDR_PAGE_INTERLEAVING;
1126 		popts->memctl_interleaving =
1127 			((CONFIG_SYS_NUM_DDR_CTLRS == 3) && ctrl_num == 2) ?
1128 			0 : 1;
1129 	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
1130 					"ctlr_intlv",
1131 					"bank", buf)) {
1132 		popts->memctl_interleaving_mode =
1133 			((CONFIG_SYS_NUM_DDR_CTLRS == 3) && ctrl_num == 2) ?
1134 			0 : FSL_DDR_BANK_INTERLEAVING;
1135 		popts->memctl_interleaving =
1136 			((CONFIG_SYS_NUM_DDR_CTLRS == 3) && ctrl_num == 2) ?
1137 			0 : 1;
1138 	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
1139 					"ctlr_intlv",
1140 					"superbank", buf)) {
1141 		popts->memctl_interleaving_mode =
1142 			((CONFIG_SYS_NUM_DDR_CTLRS == 3) && ctrl_num == 2) ?
1143 			0 : FSL_DDR_SUPERBANK_INTERLEAVING;
1144 		popts->memctl_interleaving =
1145 			((CONFIG_SYS_NUM_DDR_CTLRS == 3) && ctrl_num == 2) ?
1146 			0 : 1;
1147 #if (CONFIG_SYS_NUM_DDR_CTLRS == 3)
1148 	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
1149 					"ctlr_intlv",
1150 					"3way_1KB", buf)) {
1151 		popts->memctl_interleaving_mode =
1152 			FSL_DDR_3WAY_1KB_INTERLEAVING;
1153 	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
1154 					"ctlr_intlv",
1155 					"3way_4KB", buf)) {
1156 		popts->memctl_interleaving_mode =
1157 			FSL_DDR_3WAY_4KB_INTERLEAVING;
1158 	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
1159 					"ctlr_intlv",
1160 					"3way_8KB", buf)) {
1161 		popts->memctl_interleaving_mode =
1162 			FSL_DDR_3WAY_8KB_INTERLEAVING;
1163 #elif (CONFIG_SYS_NUM_DDR_CTLRS == 4)
1164 	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
1165 					"ctlr_intlv",
1166 					"4way_1KB", buf)) {
1167 		popts->memctl_interleaving_mode =
1168 			FSL_DDR_4WAY_1KB_INTERLEAVING;
1169 	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
1170 					"ctlr_intlv",
1171 					"4way_4KB", buf)) {
1172 		popts->memctl_interleaving_mode =
1173 			FSL_DDR_4WAY_4KB_INTERLEAVING;
1174 	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
1175 					"ctlr_intlv",
1176 					"4way_8KB", buf)) {
1177 		popts->memctl_interleaving_mode =
1178 			FSL_DDR_4WAY_8KB_INTERLEAVING;
1179 #endif
1180 	} else {
1181 		popts->memctl_interleaving = 0;
1182 		printf("hwconfig has unrecognized parameter for ctlr_intlv.\n");
1183 	}
1184 #endif	/* CONFIG_SYS_FSL_DDR_INTLV_256B */
1185 done:
1186 #endif /* CONFIG_SYS_NUM_DDR_CTLRS > 1 */
1187 	if ((hwconfig_sub_f("fsl_ddr", "bank_intlv", buf)) &&
1188 		(CONFIG_CHIP_SELECTS_PER_CTRL > 1)) {
1189 		/* test null first. if CONFIG_HWCONFIG is not defined,
1190 		 * hwconfig_subarg_cmp_f returns non-zero */
1191 		if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
1192 					    "null", buf))
1193 			debug("bank interleaving disabled.\n");
1194 		else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
1195 						 "cs0_cs1", buf))
1196 			popts->ba_intlv_ctl = FSL_DDR_CS0_CS1;
1197 		else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
1198 						 "cs2_cs3", buf))
1199 			popts->ba_intlv_ctl = FSL_DDR_CS2_CS3;
1200 		else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
1201 						 "cs0_cs1_and_cs2_cs3", buf))
1202 			popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_AND_CS2_CS3;
1203 		else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
1204 						 "cs0_cs1_cs2_cs3", buf))
1205 			popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_CS2_CS3;
1206 		else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
1207 						"auto", buf))
1208 			popts->ba_intlv_ctl = auto_bank_intlv(pdimm);
1209 		else
1210 			printf("hwconfig has unrecognized parameter for bank_intlv.\n");
1211 		switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
1212 		case FSL_DDR_CS0_CS1_CS2_CS3:
1213 #if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
1214 			if (pdimm[0].n_ranks < 4) {
1215 				popts->ba_intlv_ctl = 0;
1216 				printf("Not enough bank(chip-select) for "
1217 					"CS0+CS1+CS2+CS3 on controller %d, "
1218 					"interleaving disabled!\n", ctrl_num);
1219 			}
1220 #elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
1221 #ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
1222 			if (pdimm[0].n_ranks == 4)
1223 				break;
1224 #endif
1225 			if ((pdimm[0].n_ranks < 2) && (pdimm[1].n_ranks < 2)) {
1226 				popts->ba_intlv_ctl = 0;
1227 				printf("Not enough bank(chip-select) for "
1228 					"CS0+CS1+CS2+CS3 on controller %d, "
1229 					"interleaving disabled!\n", ctrl_num);
1230 			}
1231 			if (pdimm[0].capacity != pdimm[1].capacity) {
1232 				popts->ba_intlv_ctl = 0;
1233 				printf("Not identical DIMM size for "
1234 					"CS0+CS1+CS2+CS3 on controller %d, "
1235 					"interleaving disabled!\n", ctrl_num);
1236 			}
1237 #endif
1238 			break;
1239 		case FSL_DDR_CS0_CS1:
1240 			if (pdimm[0].n_ranks < 2) {
1241 				popts->ba_intlv_ctl = 0;
1242 				printf("Not enough bank(chip-select) for "
1243 					"CS0+CS1 on controller %d, "
1244 					"interleaving disabled!\n", ctrl_num);
1245 			}
1246 			break;
1247 		case FSL_DDR_CS2_CS3:
1248 #if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
1249 			if (pdimm[0].n_ranks < 4) {
1250 				popts->ba_intlv_ctl = 0;
1251 				printf("Not enough bank(chip-select) for CS2+CS3 "
1252 					"on controller %d, interleaving disabled!\n", ctrl_num);
1253 			}
1254 #elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
1255 			if (pdimm[1].n_ranks < 2) {
1256 				popts->ba_intlv_ctl = 0;
1257 				printf("Not enough bank(chip-select) for CS2+CS3 "
1258 					"on controller %d, interleaving disabled!\n", ctrl_num);
1259 			}
1260 #endif
1261 			break;
1262 		case FSL_DDR_CS0_CS1_AND_CS2_CS3:
1263 #if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
1264 			if (pdimm[0].n_ranks < 4) {
1265 				popts->ba_intlv_ctl = 0;
1266 				printf("Not enough bank(CS) for CS0+CS1 and "
1267 					"CS2+CS3 on controller %d, "
1268 					"interleaving disabled!\n", ctrl_num);
1269 			}
1270 #elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
1271 			if ((pdimm[0].n_ranks < 2) || (pdimm[1].n_ranks < 2)) {
1272 				popts->ba_intlv_ctl = 0;
1273 				printf("Not enough bank(CS) for CS0+CS1 and "
1274 					"CS2+CS3 on controller %d, "
1275 					"interleaving disabled!\n", ctrl_num);
1276 			}
1277 #endif
1278 			break;
1279 		default:
1280 			popts->ba_intlv_ctl = 0;
1281 			break;
1282 		}
1283 	}
1284 
1285 	if (hwconfig_sub_f("fsl_ddr", "addr_hash", buf)) {
1286 		if (hwconfig_subarg_cmp_f("fsl_ddr", "addr_hash", "null", buf))
1287 			popts->addr_hash = 0;
1288 		else if (hwconfig_subarg_cmp_f("fsl_ddr", "addr_hash",
1289 					       "true", buf))
1290 			popts->addr_hash = 1;
1291 	}
1292 
1293 	if (pdimm[0].n_ranks == 4)
1294 		popts->quad_rank_present = 1;
1295 
1296 	popts->package_3ds = pdimm->package_3ds;
1297 
1298 #if (CONFIG_FSL_SDRAM_TYPE != SDRAM_TYPE_DDR4)
1299 	ddr_freq = get_ddr_freq(ctrl_num) / 1000000;
1300 	if (popts->registered_dimm_en) {
1301 		popts->rcw_override = 1;
1302 		popts->rcw_1 = 0x000a5a00;
1303 		if (ddr_freq <= 800)
1304 			popts->rcw_2 = 0x00000000;
1305 		else if (ddr_freq <= 1066)
1306 			popts->rcw_2 = 0x00100000;
1307 		else if (ddr_freq <= 1333)
1308 			popts->rcw_2 = 0x00200000;
1309 		else
1310 			popts->rcw_2 = 0x00300000;
1311 	}
1312 #endif
1313 
1314 	fsl_ddr_board_options(popts, pdimm, ctrl_num);
1315 
1316 	return 0;
1317 }
1318 
1319 void check_interleaving_options(fsl_ddr_info_t *pinfo)
1320 {
1321 	int i, j, k, check_n_ranks, intlv_invalid = 0;
1322 	unsigned int check_intlv, check_n_row_addr, check_n_col_addr;
1323 	unsigned long long check_rank_density;
1324 	struct dimm_params_s *dimm;
1325 	int first_ctrl = pinfo->first_ctrl;
1326 	int last_ctrl = first_ctrl + pinfo->num_ctrls - 1;
1327 
1328 	/*
1329 	 * Check if all controllers are configured for memory
1330 	 * controller interleaving. Identical dimms are recommended. At least
1331 	 * the size, row and col address should be checked.
1332 	 */
1333 	j = 0;
1334 	check_n_ranks = pinfo->dimm_params[first_ctrl][0].n_ranks;
1335 	check_rank_density = pinfo->dimm_params[first_ctrl][0].rank_density;
1336 	check_n_row_addr =  pinfo->dimm_params[first_ctrl][0].n_row_addr;
1337 	check_n_col_addr = pinfo->dimm_params[first_ctrl][0].n_col_addr;
1338 	check_intlv = pinfo->memctl_opts[first_ctrl].memctl_interleaving_mode;
1339 	for (i = first_ctrl; i <= last_ctrl; i++) {
1340 		dimm = &pinfo->dimm_params[i][0];
1341 		if (!pinfo->memctl_opts[i].memctl_interleaving) {
1342 			continue;
1343 		} else if (((check_rank_density != dimm->rank_density) ||
1344 		     (check_n_ranks != dimm->n_ranks) ||
1345 		     (check_n_row_addr != dimm->n_row_addr) ||
1346 		     (check_n_col_addr != dimm->n_col_addr) ||
1347 		     (check_intlv !=
1348 			pinfo->memctl_opts[i].memctl_interleaving_mode))){
1349 			intlv_invalid = 1;
1350 			break;
1351 		} else {
1352 			j++;
1353 		}
1354 
1355 	}
1356 	if (intlv_invalid) {
1357 		for (i = first_ctrl; i <= last_ctrl; i++)
1358 			pinfo->memctl_opts[i].memctl_interleaving = 0;
1359 		printf("Not all DIMMs are identical. "
1360 			"Memory controller interleaving disabled.\n");
1361 	} else {
1362 		switch (check_intlv) {
1363 		case FSL_DDR_256B_INTERLEAVING:
1364 		case FSL_DDR_CACHE_LINE_INTERLEAVING:
1365 		case FSL_DDR_PAGE_INTERLEAVING:
1366 		case FSL_DDR_BANK_INTERLEAVING:
1367 		case FSL_DDR_SUPERBANK_INTERLEAVING:
1368 #if (3 == CONFIG_SYS_NUM_DDR_CTLRS)
1369 				k = 2;
1370 #else
1371 				k = CONFIG_SYS_NUM_DDR_CTLRS;
1372 #endif
1373 			break;
1374 		case FSL_DDR_3WAY_1KB_INTERLEAVING:
1375 		case FSL_DDR_3WAY_4KB_INTERLEAVING:
1376 		case FSL_DDR_3WAY_8KB_INTERLEAVING:
1377 		case FSL_DDR_4WAY_1KB_INTERLEAVING:
1378 		case FSL_DDR_4WAY_4KB_INTERLEAVING:
1379 		case FSL_DDR_4WAY_8KB_INTERLEAVING:
1380 		default:
1381 			k = CONFIG_SYS_NUM_DDR_CTLRS;
1382 			break;
1383 		}
1384 		debug("%d of %d controllers are interleaving.\n", j, k);
1385 		if (j && (j != k)) {
1386 			for (i = first_ctrl; i <= last_ctrl; i++)
1387 				pinfo->memctl_opts[i].memctl_interleaving = 0;
1388 			if ((last_ctrl - first_ctrl) > 1)
1389 				puts("Not all controllers have compatible interleaving mode. All disabled.\n");
1390 		}
1391 	}
1392 	debug("Checking interleaving options completed\n");
1393 }
1394 
1395 int fsl_use_spd(void)
1396 {
1397 	int use_spd = 0;
1398 
1399 #ifdef CONFIG_DDR_SPD
1400 	char buf[HWCONFIG_BUFFER_SIZE];
1401 
1402 	/*
1403 	 * Extract hwconfig from environment since we have not properly setup
1404 	 * the environment but need it for ddr config params
1405 	 */
1406 	if (env_get_f("hwconfig", buf, sizeof(buf)) < 0)
1407 		buf[0] = '\0';
1408 
1409 	/* if hwconfig is not enabled, or "sdram" is not defined, use spd */
1410 	if (hwconfig_sub_f("fsl_ddr", "sdram", buf)) {
1411 		if (hwconfig_subarg_cmp_f("fsl_ddr", "sdram", "spd", buf))
1412 			use_spd = 1;
1413 		else if (hwconfig_subarg_cmp_f("fsl_ddr", "sdram",
1414 					       "fixed", buf))
1415 			use_spd = 0;
1416 		else
1417 			use_spd = 1;
1418 	} else
1419 		use_spd = 1;
1420 #endif
1421 
1422 	return use_spd;
1423 }
1424