1 /* 2 * Copyright 2008 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0 5 */ 6 7 #include <common.h> 8 #include <asm/io.h> 9 #include <fsl_ddr_sdram.h> 10 11 #if (CONFIG_CHIP_SELECTS_PER_CTRL > 4) 12 #error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL 13 #endif 14 15 void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, 16 unsigned int ctrl_num, int step) 17 { 18 unsigned int i; 19 struct ccsr_ddr __iomem *ddr = 20 (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; 21 22 if (ctrl_num != 0) { 23 printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); 24 return; 25 } 26 27 for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { 28 if (i == 0) { 29 out_be32(&ddr->cs0_bnds, regs->cs[i].bnds); 30 out_be32(&ddr->cs0_config, regs->cs[i].config); 31 32 } else if (i == 1) { 33 out_be32(&ddr->cs1_bnds, regs->cs[i].bnds); 34 out_be32(&ddr->cs1_config, regs->cs[i].config); 35 36 } else if (i == 2) { 37 out_be32(&ddr->cs2_bnds, regs->cs[i].bnds); 38 out_be32(&ddr->cs2_config, regs->cs[i].config); 39 40 } else if (i == 3) { 41 out_be32(&ddr->cs3_bnds, regs->cs[i].bnds); 42 out_be32(&ddr->cs3_config, regs->cs[i].config); 43 } 44 } 45 46 out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1); 47 out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2); 48 out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode); 49 out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval); 50 #if defined(CONFIG_MPC8555) || defined(CONFIG_MPC8541) 51 out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl); 52 #endif 53 54 /* 55 * 200 painful micro-seconds must elapse between 56 * the DDR clock setup and the DDR config enable. 57 */ 58 udelay(200); 59 asm volatile("sync;isync"); 60 61 out_be32(&ddr->sdram_cfg, regs->ddr_sdram_cfg); 62 63 asm("sync;isync;msync"); 64 udelay(500); 65 } 66 67 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) 68 /* 69 * Initialize all of memory for ECC, then enable errors. 70 */ 71 72 void 73 ddr_enable_ecc(unsigned int dram_size) 74 { 75 struct ccsr_ddr __iomem *ddr = 76 (struct ccsr_ddr __iomem *)(CONFIG_SYS_FSL_DDR_ADDR); 77 78 dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size); 79 80 /* 81 * Enable errors for ECC. 82 */ 83 debug("DMA DDR: err_disable = 0x%08x\n", ddr->err_disable); 84 ddr->err_disable = 0x00000000; 85 asm("sync;isync;msync"); 86 debug("DMA DDR: err_disable = 0x%08x\n", ddr->err_disable); 87 } 88 89 #endif /* CONFIG_DDR_ECC && ! CONFIG_ECC_INIT_VIA_DDRCONTROLLER */ 90