1 /* 2 * Copyright 2010-2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * Generic driver for Freescale DDR/DDR2/DDR3 memory controller. 9 * Based on code from spd_sdram.c 10 * Author: James Yang [at freescale.com] 11 * York Sun [at freescale.com] 12 */ 13 14 #include <common.h> 15 #include <cli.h> 16 #include <linux/ctype.h> 17 #include <asm/types.h> 18 #include <asm/io.h> 19 20 #include <fsl_ddr_sdram.h> 21 #include <fsl_ddr.h> 22 23 /* Option parameter Structures */ 24 struct options_string { 25 const char *option_name; 26 size_t offset; 27 unsigned int size; 28 const char printhex; 29 }; 30 31 static unsigned int picos_to_mhz(unsigned int picos) 32 { 33 return 1000000 / picos; 34 } 35 36 static void print_option_table(const struct options_string *table, 37 int table_size, 38 const void *base) 39 { 40 unsigned int i; 41 unsigned int *ptr; 42 unsigned long long *ptr_l; 43 44 for (i = 0; i < table_size; i++) { 45 switch (table[i].size) { 46 case 4: 47 ptr = (unsigned int *) (base + table[i].offset); 48 if (table[i].printhex) { 49 printf("%s = 0x%08X\n", 50 table[i].option_name, *ptr); 51 } else { 52 printf("%s = %u\n", 53 table[i].option_name, *ptr); 54 } 55 break; 56 case 8: 57 ptr_l = (unsigned long long *) (base + table[i].offset); 58 printf("%s = %llu\n", 59 table[i].option_name, *ptr_l); 60 break; 61 default: 62 printf("Unrecognized size!\n"); 63 break; 64 } 65 } 66 } 67 68 static int handle_option_table(const struct options_string *table, 69 int table_size, 70 void *base, 71 const char *opt, 72 const char *val) 73 { 74 unsigned int i; 75 unsigned int value, *ptr; 76 unsigned long long value_l, *ptr_l; 77 78 for (i = 0; i < table_size; i++) { 79 if (strcmp(table[i].option_name, opt) != 0) 80 continue; 81 switch (table[i].size) { 82 case 4: 83 value = simple_strtoul(val, NULL, 0); 84 ptr = base + table[i].offset; 85 *ptr = value; 86 break; 87 case 8: 88 value_l = simple_strtoull(val, NULL, 0); 89 ptr_l = base + table[i].offset; 90 *ptr_l = value_l; 91 break; 92 default: 93 printf("Unrecognized size!\n"); 94 break; 95 } 96 return 1; 97 } 98 99 return 0; 100 } 101 102 static void fsl_ddr_generic_edit(void *pdata, 103 void *pend, 104 unsigned int element_size, 105 unsigned int element_num, 106 unsigned int value) 107 { 108 char *pcdata = (char *)pdata; /* BIG ENDIAN ONLY */ 109 110 pcdata += element_num * element_size; 111 if ((pcdata + element_size) > (char *) pend) { 112 printf("trying to write past end of data\n"); 113 return; 114 } 115 116 switch (element_size) { 117 case 1: 118 __raw_writeb(value, pcdata); 119 break; 120 case 2: 121 __raw_writew(value, pcdata); 122 break; 123 case 4: 124 __raw_writel(value, pcdata); 125 break; 126 default: 127 printf("unexpected element size %u\n", element_size); 128 break; 129 } 130 } 131 132 static void fsl_ddr_spd_edit(fsl_ddr_info_t *pinfo, 133 unsigned int ctrl_num, 134 unsigned int dimm_num, 135 unsigned int element_num, 136 unsigned int value) 137 { 138 generic_spd_eeprom_t *pspd; 139 140 pspd = &(pinfo->spd_installed_dimms[ctrl_num][dimm_num]); 141 fsl_ddr_generic_edit(pspd, pspd + 1, 1, element_num, value); 142 } 143 144 #define COMMON_TIMING(x) {#x, offsetof(common_timing_params_t, x), \ 145 sizeof((common_timing_params_t *)0)->x, 0} 146 147 static void lowest_common_dimm_parameters_edit(fsl_ddr_info_t *pinfo, 148 unsigned int ctrl_num, 149 const char *optname_str, 150 const char *value_str) 151 { 152 common_timing_params_t *p = &pinfo->common_timing_params[ctrl_num]; 153 154 static const struct options_string options[] = { 155 COMMON_TIMING(tckmin_x_ps), 156 COMMON_TIMING(tckmax_ps), 157 #if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4) 158 COMMON_TIMING(taamin_ps), 159 #endif 160 COMMON_TIMING(trcd_ps), 161 COMMON_TIMING(trp_ps), 162 COMMON_TIMING(tras_ps), 163 164 #ifdef CONFIG_SYS_FSL_DDR4 165 COMMON_TIMING(trfc1_ps), 166 COMMON_TIMING(trfc2_ps), 167 COMMON_TIMING(trfc4_ps), 168 COMMON_TIMING(trrds_ps), 169 COMMON_TIMING(trrdl_ps), 170 COMMON_TIMING(tccdl_ps), 171 #else 172 COMMON_TIMING(twtr_ps), 173 COMMON_TIMING(trfc_ps), 174 COMMON_TIMING(trrd_ps), 175 COMMON_TIMING(trtp_ps), 176 #endif 177 COMMON_TIMING(twr_ps), 178 COMMON_TIMING(trc_ps), 179 COMMON_TIMING(refresh_rate_ps), 180 COMMON_TIMING(extended_op_srt), 181 #if defined(CONFIG_SYS_FSL_DDR1) || defined(CONFIG_SYS_FSL_DDR2) 182 COMMON_TIMING(tis_ps), 183 COMMON_TIMING(tih_ps), 184 COMMON_TIMING(tds_ps), 185 COMMON_TIMING(tdh_ps), 186 COMMON_TIMING(tdqsq_max_ps), 187 COMMON_TIMING(tqhs_ps), 188 #endif 189 COMMON_TIMING(ndimms_present), 190 COMMON_TIMING(lowest_common_spd_caslat), 191 COMMON_TIMING(highest_common_derated_caslat), 192 COMMON_TIMING(additive_latency), 193 COMMON_TIMING(all_dimms_burst_lengths_bitmask), 194 COMMON_TIMING(all_dimms_registered), 195 COMMON_TIMING(all_dimms_unbuffered), 196 COMMON_TIMING(all_dimms_ecc_capable), 197 COMMON_TIMING(total_mem), 198 COMMON_TIMING(base_address), 199 }; 200 static const unsigned int n_opts = ARRAY_SIZE(options); 201 202 if (handle_option_table(options, n_opts, p, optname_str, value_str)) 203 return; 204 205 printf("Error: couldn't find option string %s\n", optname_str); 206 } 207 208 #define DIMM_PARM(x) {#x, offsetof(dimm_params_t, x), \ 209 sizeof((dimm_params_t *)0)->x, 0} 210 #define DIMM_PARM_HEX(x) {#x, offsetof(dimm_params_t, x), \ 211 sizeof((dimm_params_t *)0)->x, 1} 212 213 static void fsl_ddr_dimm_parameters_edit(fsl_ddr_info_t *pinfo, 214 unsigned int ctrl_num, 215 unsigned int dimm_num, 216 const char *optname_str, 217 const char *value_str) 218 { 219 dimm_params_t *p = &(pinfo->dimm_params[ctrl_num][dimm_num]); 220 221 static const struct options_string options[] = { 222 DIMM_PARM(n_ranks), 223 DIMM_PARM(data_width), 224 DIMM_PARM(primary_sdram_width), 225 DIMM_PARM(ec_sdram_width), 226 DIMM_PARM(registered_dimm), 227 DIMM_PARM(mirrored_dimm), 228 DIMM_PARM(device_width), 229 230 DIMM_PARM(n_row_addr), 231 DIMM_PARM(n_col_addr), 232 DIMM_PARM(edc_config), 233 #ifdef CONFIG_SYS_FSL_DDR4 234 DIMM_PARM(bank_addr_bits), 235 DIMM_PARM(bank_group_bits), 236 #else 237 DIMM_PARM(n_banks_per_sdram_device), 238 #endif 239 DIMM_PARM(burst_lengths_bitmask), 240 DIMM_PARM(row_density), 241 242 DIMM_PARM(tckmin_x_ps), 243 DIMM_PARM(tckmin_x_minus_1_ps), 244 DIMM_PARM(tckmin_x_minus_2_ps), 245 DIMM_PARM(tckmax_ps), 246 247 DIMM_PARM(caslat_x), 248 DIMM_PARM(caslat_x_minus_1), 249 DIMM_PARM(caslat_x_minus_2), 250 251 DIMM_PARM(caslat_lowest_derated), 252 253 DIMM_PARM(trcd_ps), 254 DIMM_PARM(trp_ps), 255 DIMM_PARM(tras_ps), 256 #ifdef CONFIG_SYS_FSL_DDR4 257 DIMM_PARM(trfc1_ps), 258 DIMM_PARM(trfc2_ps), 259 DIMM_PARM(trfc4_ps), 260 DIMM_PARM(trrds_ps), 261 DIMM_PARM(trrdl_ps), 262 DIMM_PARM(tccdl_ps), 263 #else 264 DIMM_PARM(twr_ps), 265 DIMM_PARM(twtr_ps), 266 DIMM_PARM(trfc_ps), 267 DIMM_PARM(trrd_ps), 268 DIMM_PARM(trtp_ps), 269 #endif 270 DIMM_PARM(trc_ps), 271 DIMM_PARM(refresh_rate_ps), 272 DIMM_PARM(extended_op_srt), 273 274 #if defined(CONFIG_SYS_FSL_DDR1) || defined(CONFIG_SYS_FSL_DDR2) 275 DIMM_PARM(tis_ps), 276 DIMM_PARM(tih_ps), 277 DIMM_PARM(tds_ps), 278 DIMM_PARM(tdh_ps), 279 DIMM_PARM(tdqsq_max_ps), 280 DIMM_PARM(tqhs_ps), 281 #endif 282 #ifdef CONFIG_SYS_FSL_DDR4 283 DIMM_PARM_HEX(dq_mapping[0]), 284 DIMM_PARM_HEX(dq_mapping[1]), 285 DIMM_PARM_HEX(dq_mapping[2]), 286 DIMM_PARM_HEX(dq_mapping[3]), 287 DIMM_PARM_HEX(dq_mapping[4]), 288 DIMM_PARM_HEX(dq_mapping[5]), 289 DIMM_PARM_HEX(dq_mapping[6]), 290 DIMM_PARM_HEX(dq_mapping[7]), 291 DIMM_PARM_HEX(dq_mapping[8]), 292 DIMM_PARM_HEX(dq_mapping[9]), 293 DIMM_PARM_HEX(dq_mapping[10]), 294 DIMM_PARM_HEX(dq_mapping[11]), 295 DIMM_PARM_HEX(dq_mapping[12]), 296 DIMM_PARM_HEX(dq_mapping[13]), 297 DIMM_PARM_HEX(dq_mapping[14]), 298 DIMM_PARM_HEX(dq_mapping[15]), 299 DIMM_PARM_HEX(dq_mapping[16]), 300 DIMM_PARM_HEX(dq_mapping[17]), 301 DIMM_PARM(dq_mapping_ors), 302 #endif 303 DIMM_PARM(rank_density), 304 DIMM_PARM(capacity), 305 DIMM_PARM(base_address), 306 }; 307 308 static const unsigned int n_opts = ARRAY_SIZE(options); 309 310 if (handle_option_table(options, n_opts, p, optname_str, value_str)) 311 return; 312 313 printf("couldn't find option string %s\n", optname_str); 314 } 315 316 static void print_dimm_parameters(const dimm_params_t *pdimm) 317 { 318 static const struct options_string options[] = { 319 DIMM_PARM(n_ranks), 320 DIMM_PARM(data_width), 321 DIMM_PARM(primary_sdram_width), 322 DIMM_PARM(ec_sdram_width), 323 DIMM_PARM(registered_dimm), 324 DIMM_PARM(mirrored_dimm), 325 DIMM_PARM(device_width), 326 327 DIMM_PARM(n_row_addr), 328 DIMM_PARM(n_col_addr), 329 DIMM_PARM(edc_config), 330 #ifdef CONFIG_SYS_FSL_DDR4 331 DIMM_PARM(bank_addr_bits), 332 DIMM_PARM(bank_group_bits), 333 #else 334 DIMM_PARM(n_banks_per_sdram_device), 335 #endif 336 337 DIMM_PARM(tckmin_x_ps), 338 DIMM_PARM(tckmin_x_minus_1_ps), 339 DIMM_PARM(tckmin_x_minus_2_ps), 340 DIMM_PARM(tckmax_ps), 341 342 DIMM_PARM(caslat_x), 343 DIMM_PARM_HEX(caslat_x), 344 DIMM_PARM(taa_ps), 345 DIMM_PARM(caslat_x_minus_1), 346 DIMM_PARM(caslat_x_minus_2), 347 DIMM_PARM(caslat_lowest_derated), 348 349 DIMM_PARM(trcd_ps), 350 DIMM_PARM(trp_ps), 351 DIMM_PARM(tras_ps), 352 #if defined(CONFIG_SYS_FSL_DDR4) || defined(CONFIG_SYS_FSL_DDR3) 353 DIMM_PARM(tfaw_ps), 354 #endif 355 #ifdef CONFIG_SYS_FSL_DDR4 356 DIMM_PARM(trfc1_ps), 357 DIMM_PARM(trfc2_ps), 358 DIMM_PARM(trfc4_ps), 359 DIMM_PARM(trrds_ps), 360 DIMM_PARM(trrdl_ps), 361 DIMM_PARM(tccdl_ps), 362 #else 363 DIMM_PARM(twr_ps), 364 DIMM_PARM(twtr_ps), 365 DIMM_PARM(trfc_ps), 366 DIMM_PARM(trrd_ps), 367 DIMM_PARM(trtp_ps), 368 #endif 369 DIMM_PARM(trc_ps), 370 DIMM_PARM(refresh_rate_ps), 371 372 #if defined(CONFIG_SYS_FSL_DDR1) || defined(CONFIG_SYS_FSL_DDR2) 373 DIMM_PARM(tis_ps), 374 DIMM_PARM(tih_ps), 375 DIMM_PARM(tds_ps), 376 DIMM_PARM(tdh_ps), 377 DIMM_PARM(tdqsq_max_ps), 378 DIMM_PARM(tqhs_ps), 379 #endif 380 #ifdef CONFIG_SYS_FSL_DDR4 381 DIMM_PARM_HEX(dq_mapping[0]), 382 DIMM_PARM_HEX(dq_mapping[1]), 383 DIMM_PARM_HEX(dq_mapping[2]), 384 DIMM_PARM_HEX(dq_mapping[3]), 385 DIMM_PARM_HEX(dq_mapping[4]), 386 DIMM_PARM_HEX(dq_mapping[5]), 387 DIMM_PARM_HEX(dq_mapping[6]), 388 DIMM_PARM_HEX(dq_mapping[7]), 389 DIMM_PARM_HEX(dq_mapping[8]), 390 DIMM_PARM_HEX(dq_mapping[9]), 391 DIMM_PARM_HEX(dq_mapping[10]), 392 DIMM_PARM_HEX(dq_mapping[11]), 393 DIMM_PARM_HEX(dq_mapping[12]), 394 DIMM_PARM_HEX(dq_mapping[13]), 395 DIMM_PARM_HEX(dq_mapping[14]), 396 DIMM_PARM_HEX(dq_mapping[15]), 397 DIMM_PARM_HEX(dq_mapping[16]), 398 DIMM_PARM_HEX(dq_mapping[17]), 399 DIMM_PARM(dq_mapping_ors), 400 #endif 401 }; 402 static const unsigned int n_opts = ARRAY_SIZE(options); 403 404 if (pdimm->n_ranks == 0) { 405 printf("DIMM not present\n"); 406 return; 407 } 408 printf("DIMM organization parameters:\n"); 409 printf("module part name = %s\n", pdimm->mpart); 410 printf("rank_density = %llu bytes (%llu megabytes)\n", 411 pdimm->rank_density, pdimm->rank_density / 0x100000); 412 printf("capacity = %llu bytes (%llu megabytes)\n", 413 pdimm->capacity, pdimm->capacity / 0x100000); 414 printf("burst_lengths_bitmask = %02X\n", 415 pdimm->burst_lengths_bitmask); 416 printf("base_addresss = %llu (%08llX %08llX)\n", 417 pdimm->base_address, 418 (pdimm->base_address >> 32), 419 pdimm->base_address & 0xFFFFFFFF); 420 print_option_table(options, n_opts, pdimm); 421 } 422 423 static void print_lowest_common_dimm_parameters( 424 const common_timing_params_t *plcd_dimm_params) 425 { 426 static const struct options_string options[] = { 427 #if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4) 428 COMMON_TIMING(taamin_ps), 429 #endif 430 COMMON_TIMING(trcd_ps), 431 COMMON_TIMING(trp_ps), 432 COMMON_TIMING(tras_ps), 433 #ifdef CONFIG_SYS_FSL_DDR4 434 COMMON_TIMING(trfc1_ps), 435 COMMON_TIMING(trfc2_ps), 436 COMMON_TIMING(trfc4_ps), 437 COMMON_TIMING(trrds_ps), 438 COMMON_TIMING(trrdl_ps), 439 COMMON_TIMING(tccdl_ps), 440 #else 441 COMMON_TIMING(twtr_ps), 442 COMMON_TIMING(trfc_ps), 443 COMMON_TIMING(trrd_ps), 444 COMMON_TIMING(trtp_ps), 445 #endif 446 COMMON_TIMING(twr_ps), 447 COMMON_TIMING(trc_ps), 448 COMMON_TIMING(refresh_rate_ps), 449 COMMON_TIMING(extended_op_srt), 450 #if defined(CONFIG_SYS_FSL_DDR1) || defined(CONFIG_SYS_FSL_DDR2) 451 COMMON_TIMING(tis_ps), 452 COMMON_TIMING(tih_ps), 453 COMMON_TIMING(tds_ps), 454 COMMON_TIMING(tdh_ps), 455 COMMON_TIMING(tdqsq_max_ps), 456 COMMON_TIMING(tqhs_ps), 457 #endif 458 COMMON_TIMING(lowest_common_spd_caslat), 459 COMMON_TIMING(highest_common_derated_caslat), 460 COMMON_TIMING(additive_latency), 461 COMMON_TIMING(ndimms_present), 462 COMMON_TIMING(all_dimms_registered), 463 COMMON_TIMING(all_dimms_unbuffered), 464 COMMON_TIMING(all_dimms_ecc_capable), 465 }; 466 static const unsigned int n_opts = ARRAY_SIZE(options); 467 468 /* Clock frequencies */ 469 printf("tckmin_x_ps = %u (%u MHz)\n", 470 plcd_dimm_params->tckmin_x_ps, 471 picos_to_mhz(plcd_dimm_params->tckmin_x_ps)); 472 printf("tckmax_ps = %u (%u MHz)\n", 473 plcd_dimm_params->tckmax_ps, 474 picos_to_mhz(plcd_dimm_params->tckmax_ps)); 475 printf("all_dimms_burst_lengths_bitmask = %02X\n", 476 plcd_dimm_params->all_dimms_burst_lengths_bitmask); 477 478 print_option_table(options, n_opts, plcd_dimm_params); 479 480 printf("total_mem = %llu (%llu megabytes)\n", 481 plcd_dimm_params->total_mem, 482 plcd_dimm_params->total_mem / 0x100000); 483 printf("base_address = %llu (%llu megabytes)\n", 484 plcd_dimm_params->base_address, 485 plcd_dimm_params->base_address / 0x100000); 486 } 487 488 #define CTRL_OPTIONS(x) {#x, offsetof(memctl_options_t, x), \ 489 sizeof((memctl_options_t *)0)->x, 0} 490 #define CTRL_OPTIONS_CS(x, y) {"cs" #x "_" #y, \ 491 offsetof(memctl_options_t, cs_local_opts[x].y), \ 492 sizeof((memctl_options_t *)0)->cs_local_opts[x].y, 0} 493 494 static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo, 495 unsigned int ctl_num, 496 const char *optname_str, 497 const char *value_str) 498 { 499 memctl_options_t *p = &(pinfo->memctl_opts[ctl_num]); 500 /* 501 * This array all on the stack and *computed* each time this 502 * function is rung. 503 */ 504 static const struct options_string options[] = { 505 CTRL_OPTIONS_CS(0, odt_rd_cfg), 506 CTRL_OPTIONS_CS(0, odt_wr_cfg), 507 #if (CONFIG_CHIP_SELECTS_PER_CTRL > 1) 508 CTRL_OPTIONS_CS(1, odt_rd_cfg), 509 CTRL_OPTIONS_CS(1, odt_wr_cfg), 510 #endif 511 #if (CONFIG_CHIP_SELECTS_PER_CTRL > 2) 512 CTRL_OPTIONS_CS(2, odt_rd_cfg), 513 CTRL_OPTIONS_CS(2, odt_wr_cfg), 514 #endif 515 #if (CONFIG_CHIP_SELECTS_PER_CTRL > 2) 516 CTRL_OPTIONS_CS(3, odt_rd_cfg), 517 CTRL_OPTIONS_CS(3, odt_wr_cfg), 518 #endif 519 #if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4) 520 CTRL_OPTIONS_CS(0, odt_rtt_norm), 521 CTRL_OPTIONS_CS(0, odt_rtt_wr), 522 #if (CONFIG_CHIP_SELECTS_PER_CTRL > 1) 523 CTRL_OPTIONS_CS(1, odt_rtt_norm), 524 CTRL_OPTIONS_CS(1, odt_rtt_wr), 525 #endif 526 #if (CONFIG_CHIP_SELECTS_PER_CTRL > 2) 527 CTRL_OPTIONS_CS(2, odt_rtt_norm), 528 CTRL_OPTIONS_CS(2, odt_rtt_wr), 529 #endif 530 #if (CONFIG_CHIP_SELECTS_PER_CTRL > 2) 531 CTRL_OPTIONS_CS(3, odt_rtt_norm), 532 CTRL_OPTIONS_CS(3, odt_rtt_wr), 533 #endif 534 #endif 535 CTRL_OPTIONS(memctl_interleaving), 536 CTRL_OPTIONS(memctl_interleaving_mode), 537 CTRL_OPTIONS(ba_intlv_ctl), 538 CTRL_OPTIONS(ecc_mode), 539 CTRL_OPTIONS(ecc_init_using_memctl), 540 CTRL_OPTIONS(dqs_config), 541 CTRL_OPTIONS(self_refresh_in_sleep), 542 CTRL_OPTIONS(dynamic_power), 543 CTRL_OPTIONS(data_bus_width), 544 CTRL_OPTIONS(burst_length), 545 CTRL_OPTIONS(cas_latency_override), 546 CTRL_OPTIONS(cas_latency_override_value), 547 CTRL_OPTIONS(use_derated_caslat), 548 CTRL_OPTIONS(additive_latency_override), 549 CTRL_OPTIONS(additive_latency_override_value), 550 CTRL_OPTIONS(clk_adjust), 551 CTRL_OPTIONS(cpo_override), 552 CTRL_OPTIONS(write_data_delay), 553 CTRL_OPTIONS(half_strength_driver_enable), 554 555 /* 556 * These can probably be changed to 2T_EN and 3T_EN 557 * (using a leading numerical character) without problem 558 */ 559 CTRL_OPTIONS(twot_en), 560 CTRL_OPTIONS(threet_en), 561 CTRL_OPTIONS(ap_en), 562 CTRL_OPTIONS(x4_en), 563 CTRL_OPTIONS(bstopre), 564 CTRL_OPTIONS(wrlvl_override), 565 CTRL_OPTIONS(wrlvl_sample), 566 CTRL_OPTIONS(wrlvl_start), 567 CTRL_OPTIONS(cswl_override), 568 CTRL_OPTIONS(rcw_override), 569 CTRL_OPTIONS(rcw_1), 570 CTRL_OPTIONS(rcw_2), 571 CTRL_OPTIONS(ddr_cdr1), 572 CTRL_OPTIONS(ddr_cdr2), 573 CTRL_OPTIONS(tfaw_window_four_activates_ps), 574 CTRL_OPTIONS(trwt_override), 575 CTRL_OPTIONS(trwt), 576 CTRL_OPTIONS(rtt_override), 577 CTRL_OPTIONS(rtt_override_value), 578 CTRL_OPTIONS(rtt_wr_override_value), 579 }; 580 581 static const unsigned int n_opts = ARRAY_SIZE(options); 582 583 if (handle_option_table(options, n_opts, p, 584 optname_str, value_str)) 585 return; 586 587 printf("couldn't find option string %s\n", optname_str); 588 } 589 590 #define CFG_REGS(x) {#x, offsetof(fsl_ddr_cfg_regs_t, x), \ 591 sizeof((fsl_ddr_cfg_regs_t *)0)->x, 1} 592 #define CFG_REGS_CS(x, y) {"cs" #x "_" #y, \ 593 offsetof(fsl_ddr_cfg_regs_t, cs[x].y), \ 594 sizeof((fsl_ddr_cfg_regs_t *)0)->cs[x].y, 1} 595 596 static void print_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr) 597 { 598 unsigned int i; 599 static const struct options_string options[] = { 600 CFG_REGS_CS(0, bnds), 601 CFG_REGS_CS(0, config), 602 CFG_REGS_CS(0, config_2), 603 #if (CONFIG_CHIP_SELECTS_PER_CTRL > 1) 604 CFG_REGS_CS(1, bnds), 605 CFG_REGS_CS(1, config), 606 CFG_REGS_CS(1, config_2), 607 #endif 608 #if (CONFIG_CHIP_SELECTS_PER_CTRL > 2) 609 CFG_REGS_CS(2, bnds), 610 CFG_REGS_CS(2, config), 611 CFG_REGS_CS(2, config_2), 612 #endif 613 #if (CONFIG_CHIP_SELECTS_PER_CTRL > 2) 614 CFG_REGS_CS(3, bnds), 615 CFG_REGS_CS(3, config), 616 CFG_REGS_CS(3, config_2), 617 #endif 618 CFG_REGS(timing_cfg_3), 619 CFG_REGS(timing_cfg_0), 620 CFG_REGS(timing_cfg_1), 621 CFG_REGS(timing_cfg_2), 622 CFG_REGS(ddr_sdram_cfg), 623 CFG_REGS(ddr_sdram_cfg_2), 624 CFG_REGS(ddr_sdram_cfg_3), 625 CFG_REGS(ddr_sdram_mode), 626 CFG_REGS(ddr_sdram_mode_2), 627 CFG_REGS(ddr_sdram_mode_3), 628 CFG_REGS(ddr_sdram_mode_4), 629 CFG_REGS(ddr_sdram_mode_5), 630 CFG_REGS(ddr_sdram_mode_6), 631 CFG_REGS(ddr_sdram_mode_7), 632 CFG_REGS(ddr_sdram_mode_8), 633 #ifdef CONFIG_SYS_FSL_DDR4 634 CFG_REGS(ddr_sdram_mode_9), 635 CFG_REGS(ddr_sdram_mode_10), 636 CFG_REGS(ddr_sdram_mode_11), 637 CFG_REGS(ddr_sdram_mode_12), 638 CFG_REGS(ddr_sdram_mode_13), 639 CFG_REGS(ddr_sdram_mode_14), 640 CFG_REGS(ddr_sdram_mode_15), 641 CFG_REGS(ddr_sdram_mode_16), 642 #endif 643 CFG_REGS(ddr_sdram_interval), 644 CFG_REGS(ddr_data_init), 645 CFG_REGS(ddr_sdram_clk_cntl), 646 CFG_REGS(ddr_init_addr), 647 CFG_REGS(ddr_init_ext_addr), 648 CFG_REGS(timing_cfg_4), 649 CFG_REGS(timing_cfg_5), 650 #ifdef CONFIG_SYS_FSL_DDR4 651 CFG_REGS(timing_cfg_6), 652 CFG_REGS(timing_cfg_7), 653 CFG_REGS(timing_cfg_8), 654 CFG_REGS(timing_cfg_9), 655 #endif 656 CFG_REGS(ddr_zq_cntl), 657 CFG_REGS(ddr_wrlvl_cntl), 658 CFG_REGS(ddr_wrlvl_cntl_2), 659 CFG_REGS(ddr_wrlvl_cntl_3), 660 CFG_REGS(ddr_sr_cntr), 661 CFG_REGS(ddr_sdram_rcw_1), 662 CFG_REGS(ddr_sdram_rcw_2), 663 CFG_REGS(ddr_cdr1), 664 CFG_REGS(ddr_cdr2), 665 CFG_REGS(dq_map_0), 666 CFG_REGS(dq_map_1), 667 CFG_REGS(dq_map_2), 668 CFG_REGS(dq_map_3), 669 CFG_REGS(err_disable), 670 CFG_REGS(err_int_en), 671 CFG_REGS(ddr_eor), 672 }; 673 static const unsigned int n_opts = ARRAY_SIZE(options); 674 675 print_option_table(options, n_opts, ddr); 676 677 for (i = 0; i < 64; i++) 678 printf("debug_%02d = 0x%08X\n", i+1, ddr->debug[i]); 679 } 680 681 static void fsl_ddr_regs_edit(fsl_ddr_info_t *pinfo, 682 unsigned int ctrl_num, 683 const char *regname, 684 const char *value_str) 685 { 686 unsigned int i; 687 fsl_ddr_cfg_regs_t *ddr; 688 char buf[20]; 689 static const struct options_string options[] = { 690 CFG_REGS_CS(0, bnds), 691 CFG_REGS_CS(0, config), 692 CFG_REGS_CS(0, config_2), 693 #if (CONFIG_CHIP_SELECTS_PER_CTRL > 1) 694 CFG_REGS_CS(1, bnds), 695 CFG_REGS_CS(1, config), 696 CFG_REGS_CS(1, config_2), 697 #endif 698 #if (CONFIG_CHIP_SELECTS_PER_CTRL > 2) 699 CFG_REGS_CS(2, bnds), 700 CFG_REGS_CS(2, config), 701 CFG_REGS_CS(2, config_2), 702 #endif 703 #if (CONFIG_CHIP_SELECTS_PER_CTRL > 3) 704 CFG_REGS_CS(3, bnds), 705 CFG_REGS_CS(3, config), 706 CFG_REGS_CS(3, config_2), 707 #endif 708 CFG_REGS(timing_cfg_3), 709 CFG_REGS(timing_cfg_0), 710 CFG_REGS(timing_cfg_1), 711 CFG_REGS(timing_cfg_2), 712 CFG_REGS(ddr_sdram_cfg), 713 CFG_REGS(ddr_sdram_cfg_2), 714 CFG_REGS(ddr_sdram_cfg_3), 715 CFG_REGS(ddr_sdram_mode), 716 CFG_REGS(ddr_sdram_mode_2), 717 CFG_REGS(ddr_sdram_mode_3), 718 CFG_REGS(ddr_sdram_mode_4), 719 CFG_REGS(ddr_sdram_mode_5), 720 CFG_REGS(ddr_sdram_mode_6), 721 CFG_REGS(ddr_sdram_mode_7), 722 CFG_REGS(ddr_sdram_mode_8), 723 #ifdef CONFIG_SYS_FSL_DDR4 724 CFG_REGS(ddr_sdram_mode_9), 725 CFG_REGS(ddr_sdram_mode_10), 726 CFG_REGS(ddr_sdram_mode_11), 727 CFG_REGS(ddr_sdram_mode_12), 728 CFG_REGS(ddr_sdram_mode_13), 729 CFG_REGS(ddr_sdram_mode_14), 730 CFG_REGS(ddr_sdram_mode_15), 731 CFG_REGS(ddr_sdram_mode_16), 732 #endif 733 CFG_REGS(ddr_sdram_interval), 734 CFG_REGS(ddr_data_init), 735 CFG_REGS(ddr_sdram_clk_cntl), 736 CFG_REGS(ddr_init_addr), 737 CFG_REGS(ddr_init_ext_addr), 738 CFG_REGS(timing_cfg_4), 739 CFG_REGS(timing_cfg_5), 740 #ifdef CONFIG_SYS_FSL_DDR4 741 CFG_REGS(timing_cfg_6), 742 CFG_REGS(timing_cfg_7), 743 CFG_REGS(timing_cfg_8), 744 CFG_REGS(timing_cfg_9), 745 #endif 746 CFG_REGS(ddr_zq_cntl), 747 CFG_REGS(ddr_wrlvl_cntl), 748 CFG_REGS(ddr_wrlvl_cntl_2), 749 CFG_REGS(ddr_wrlvl_cntl_3), 750 CFG_REGS(ddr_sr_cntr), 751 CFG_REGS(ddr_sdram_rcw_1), 752 CFG_REGS(ddr_sdram_rcw_2), 753 CFG_REGS(ddr_cdr1), 754 CFG_REGS(ddr_cdr2), 755 CFG_REGS(dq_map_0), 756 CFG_REGS(dq_map_1), 757 CFG_REGS(dq_map_2), 758 CFG_REGS(dq_map_3), 759 CFG_REGS(err_disable), 760 CFG_REGS(err_int_en), 761 CFG_REGS(ddr_sdram_rcw_2), 762 CFG_REGS(ddr_sdram_rcw_2), 763 CFG_REGS(ddr_eor), 764 }; 765 static const unsigned int n_opts = ARRAY_SIZE(options); 766 767 debug("fsl_ddr_regs_edit: ctrl_num = %u, " 768 "regname = %s, value = %s\n", 769 ctrl_num, regname, value_str); 770 if (ctrl_num > CONFIG_SYS_NUM_DDR_CTLRS) 771 return; 772 773 ddr = &(pinfo->fsl_ddr_config_reg[ctrl_num]); 774 775 if (handle_option_table(options, n_opts, ddr, regname, value_str)) 776 return; 777 778 for (i = 0; i < 64; i++) { 779 unsigned int value = simple_strtoul(value_str, NULL, 0); 780 sprintf(buf, "debug_%u", i + 1); 781 if (strcmp(buf, regname) == 0) { 782 ddr->debug[i] = value; 783 return; 784 } 785 } 786 printf("Error: couldn't find register string %s\n", regname); 787 } 788 789 #define CTRL_OPTIONS_HEX(x) {#x, offsetof(memctl_options_t, x), \ 790 sizeof((memctl_options_t *)0)->x, 1} 791 792 static void print_memctl_options(const memctl_options_t *popts) 793 { 794 static const struct options_string options[] = { 795 CTRL_OPTIONS_CS(0, odt_rd_cfg), 796 CTRL_OPTIONS_CS(0, odt_wr_cfg), 797 #if (CONFIG_CHIP_SELECTS_PER_CTRL > 1) 798 CTRL_OPTIONS_CS(1, odt_rd_cfg), 799 CTRL_OPTIONS_CS(1, odt_wr_cfg), 800 #endif 801 #if (CONFIG_CHIP_SELECTS_PER_CTRL > 2) 802 CTRL_OPTIONS_CS(2, odt_rd_cfg), 803 CTRL_OPTIONS_CS(2, odt_wr_cfg), 804 #endif 805 #if (CONFIG_CHIP_SELECTS_PER_CTRL > 3) 806 CTRL_OPTIONS_CS(3, odt_rd_cfg), 807 CTRL_OPTIONS_CS(3, odt_wr_cfg), 808 #endif 809 #if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4) 810 CTRL_OPTIONS_CS(0, odt_rtt_norm), 811 CTRL_OPTIONS_CS(0, odt_rtt_wr), 812 #if (CONFIG_CHIP_SELECTS_PER_CTRL > 1) 813 CTRL_OPTIONS_CS(1, odt_rtt_norm), 814 CTRL_OPTIONS_CS(1, odt_rtt_wr), 815 #endif 816 #if (CONFIG_CHIP_SELECTS_PER_CTRL > 2) 817 CTRL_OPTIONS_CS(2, odt_rtt_norm), 818 CTRL_OPTIONS_CS(2, odt_rtt_wr), 819 #endif 820 #if (CONFIG_CHIP_SELECTS_PER_CTRL > 3) 821 CTRL_OPTIONS_CS(3, odt_rtt_norm), 822 CTRL_OPTIONS_CS(3, odt_rtt_wr), 823 #endif 824 #endif 825 CTRL_OPTIONS(memctl_interleaving), 826 CTRL_OPTIONS(memctl_interleaving_mode), 827 CTRL_OPTIONS_HEX(ba_intlv_ctl), 828 CTRL_OPTIONS(ecc_mode), 829 CTRL_OPTIONS(ecc_init_using_memctl), 830 CTRL_OPTIONS(dqs_config), 831 CTRL_OPTIONS(self_refresh_in_sleep), 832 CTRL_OPTIONS(dynamic_power), 833 CTRL_OPTIONS(data_bus_width), 834 CTRL_OPTIONS(burst_length), 835 CTRL_OPTIONS(cas_latency_override), 836 CTRL_OPTIONS(cas_latency_override_value), 837 CTRL_OPTIONS(use_derated_caslat), 838 CTRL_OPTIONS(additive_latency_override), 839 CTRL_OPTIONS(additive_latency_override_value), 840 CTRL_OPTIONS(clk_adjust), 841 CTRL_OPTIONS(cpo_override), 842 CTRL_OPTIONS(write_data_delay), 843 CTRL_OPTIONS(half_strength_driver_enable), 844 /* 845 * These can probably be changed to 2T_EN and 3T_EN 846 * (using a leading numerical character) without problem 847 */ 848 CTRL_OPTIONS(twot_en), 849 CTRL_OPTIONS(threet_en), 850 CTRL_OPTIONS(registered_dimm_en), 851 CTRL_OPTIONS(mirrored_dimm), 852 CTRL_OPTIONS(ap_en), 853 CTRL_OPTIONS(x4_en), 854 CTRL_OPTIONS(bstopre), 855 CTRL_OPTIONS(wrlvl_override), 856 CTRL_OPTIONS(wrlvl_sample), 857 CTRL_OPTIONS(wrlvl_start), 858 CTRL_OPTIONS_HEX(cswl_override), 859 CTRL_OPTIONS(rcw_override), 860 CTRL_OPTIONS(rcw_1), 861 CTRL_OPTIONS(rcw_2), 862 CTRL_OPTIONS_HEX(ddr_cdr1), 863 CTRL_OPTIONS_HEX(ddr_cdr2), 864 CTRL_OPTIONS(tfaw_window_four_activates_ps), 865 CTRL_OPTIONS(trwt_override), 866 CTRL_OPTIONS(trwt), 867 CTRL_OPTIONS(rtt_override), 868 CTRL_OPTIONS(rtt_override_value), 869 CTRL_OPTIONS(rtt_wr_override_value), 870 }; 871 static const unsigned int n_opts = ARRAY_SIZE(options); 872 873 print_option_table(options, n_opts, popts); 874 } 875 876 #ifdef CONFIG_SYS_FSL_DDR1 877 void ddr1_spd_dump(const ddr1_spd_eeprom_t *spd) 878 { 879 unsigned int i; 880 881 printf("%-3d : %02x %s\n", 0, spd->info_size, 882 " spd->info_size, * 0 # bytes written into serial memory *"); 883 printf("%-3d : %02x %s\n", 1, spd->chip_size, 884 " spd->chip_size, * 1 Total # bytes of SPD memory device *"); 885 printf("%-3d : %02x %s\n", 2, spd->mem_type, 886 " spd->mem_type, * 2 Fundamental memory type *"); 887 printf("%-3d : %02x %s\n", 3, spd->nrow_addr, 888 " spd->nrow_addr, * 3 # of Row Addresses on this assembly *"); 889 printf("%-3d : %02x %s\n", 4, spd->ncol_addr, 890 " spd->ncol_addr, * 4 # of Column Addrs on this assembly *"); 891 printf("%-3d : %02x %s\n", 5, spd->nrows, 892 " spd->nrows * 5 # of DIMM Banks *"); 893 printf("%-3d : %02x %s\n", 6, spd->dataw_lsb, 894 " spd->dataw_lsb, * 6 Data Width lsb of this assembly *"); 895 printf("%-3d : %02x %s\n", 7, spd->dataw_msb, 896 " spd->dataw_msb, * 7 Data Width msb of this assembly *"); 897 printf("%-3d : %02x %s\n", 8, spd->voltage, 898 " spd->voltage, * 8 Voltage intf std of this assembly *"); 899 printf("%-3d : %02x %s\n", 9, spd->clk_cycle, 900 " spd->clk_cycle, * 9 SDRAM Cycle time at CL=X *"); 901 printf("%-3d : %02x %s\n", 10, spd->clk_access, 902 " spd->clk_access, * 10 SDRAM Access from Clock at CL=X *"); 903 printf("%-3d : %02x %s\n", 11, spd->config, 904 " spd->config, * 11 DIMM Configuration type *"); 905 printf("%-3d : %02x %s\n", 12, spd->refresh, 906 " spd->refresh, * 12 Refresh Rate/Type *"); 907 printf("%-3d : %02x %s\n", 13, spd->primw, 908 " spd->primw, * 13 Primary SDRAM Width *"); 909 printf("%-3d : %02x %s\n", 14, spd->ecw, 910 " spd->ecw, * 14 Error Checking SDRAM width *"); 911 printf("%-3d : %02x %s\n", 15, spd->min_delay, 912 " spd->min_delay, * 15 Back to Back Random Access *"); 913 printf("%-3d : %02x %s\n", 16, spd->burstl, 914 " spd->burstl, * 16 Burst Lengths Supported *"); 915 printf("%-3d : %02x %s\n", 17, spd->nbanks, 916 " spd->nbanks, * 17 # of Banks on Each SDRAM Device *"); 917 printf("%-3d : %02x %s\n", 18, spd->cas_lat, 918 " spd->cas_lat, * 18 CAS# Latencies Supported *"); 919 printf("%-3d : %02x %s\n", 19, spd->cs_lat, 920 " spd->cs_lat, * 19 Chip Select Latency *"); 921 printf("%-3d : %02x %s\n", 20, spd->write_lat, 922 " spd->write_lat, * 20 Write Latency/Recovery *"); 923 printf("%-3d : %02x %s\n", 21, spd->mod_attr, 924 " spd->mod_attr, * 21 SDRAM Module Attributes *"); 925 printf("%-3d : %02x %s\n", 22, spd->dev_attr, 926 " spd->dev_attr, * 22 SDRAM Device Attributes *"); 927 printf("%-3d : %02x %s\n", 23, spd->clk_cycle2, 928 " spd->clk_cycle2, * 23 Min SDRAM Cycle time at CL=X-1 *"); 929 printf("%-3d : %02x %s\n", 24, spd->clk_access2, 930 " spd->clk_access2, * 24 SDRAM Access from Clock at CL=X-1 *"); 931 printf("%-3d : %02x %s\n", 25, spd->clk_cycle3, 932 " spd->clk_cycle3, * 25 Min SDRAM Cycle time at CL=X-2 *"); 933 printf("%-3d : %02x %s\n", 26, spd->clk_access3, 934 " spd->clk_access3, * 26 Max Access from Clock at CL=X-2 *"); 935 printf("%-3d : %02x %s\n", 27, spd->trp, 936 " spd->trp, * 27 Min Row Precharge Time (tRP)*"); 937 printf("%-3d : %02x %s\n", 28, spd->trrd, 938 " spd->trrd, * 28 Min Row Active to Row Active (tRRD) *"); 939 printf("%-3d : %02x %s\n", 29, spd->trcd, 940 " spd->trcd, * 29 Min RAS to CAS Delay (tRCD) *"); 941 printf("%-3d : %02x %s\n", 30, spd->tras, 942 " spd->tras, * 30 Minimum RAS Pulse Width (tRAS) *"); 943 printf("%-3d : %02x %s\n", 31, spd->bank_dens, 944 " spd->bank_dens, * 31 Density of each bank on module *"); 945 printf("%-3d : %02x %s\n", 32, spd->ca_setup, 946 " spd->ca_setup, * 32 Cmd + Addr signal input setup time *"); 947 printf("%-3d : %02x %s\n", 33, spd->ca_hold, 948 " spd->ca_hold, * 33 Cmd and Addr signal input hold time *"); 949 printf("%-3d : %02x %s\n", 34, spd->data_setup, 950 " spd->data_setup, * 34 Data signal input setup time *"); 951 printf("%-3d : %02x %s\n", 35, spd->data_hold, 952 " spd->data_hold, * 35 Data signal input hold time *"); 953 printf("%-3d : %02x %s\n", 36, spd->res_36_40[0], 954 " spd->res_36_40[0], * 36 Reserved / tWR *"); 955 printf("%-3d : %02x %s\n", 37, spd->res_36_40[1], 956 " spd->res_36_40[1], * 37 Reserved / tWTR *"); 957 printf("%-3d : %02x %s\n", 38, spd->res_36_40[2], 958 " spd->res_36_40[2], * 38 Reserved / tRTP *"); 959 printf("%-3d : %02x %s\n", 39, spd->res_36_40[3], 960 " spd->res_36_40[3], * 39 Reserved / mem_probe *"); 961 printf("%-3d : %02x %s\n", 40, spd->res_36_40[4], 962 " spd->res_36_40[4], * 40 Reserved / trc,trfc extensions *"); 963 printf("%-3d : %02x %s\n", 41, spd->trc, 964 " spd->trc, * 41 Min Active to Auto refresh time tRC *"); 965 printf("%-3d : %02x %s\n", 42, spd->trfc, 966 " spd->trfc, * 42 Min Auto to Active period tRFC *"); 967 printf("%-3d : %02x %s\n", 43, spd->tckmax, 968 " spd->tckmax, * 43 Max device cycle time tCKmax *"); 969 printf("%-3d : %02x %s\n", 44, spd->tdqsq, 970 " spd->tdqsq, * 44 Max DQS to DQ skew *"); 971 printf("%-3d : %02x %s\n", 45, spd->tqhs, 972 " spd->tqhs, * 45 Max Read DataHold skew tQHS *"); 973 printf("%-3d : %02x %s\n", 46, spd->res_46, 974 " spd->res_46, * 46 Reserved/ PLL Relock time *"); 975 printf("%-3d : %02x %s\n", 47, spd->dimm_height, 976 " spd->dimm_height * 47 SDRAM DIMM Height *"); 977 978 printf("%-3d-%3d: ", 48, 61); 979 980 for (i = 0; i < 14; i++) 981 printf("%02x", spd->res_48_61[i]); 982 983 printf(" * 48-61 IDD in SPD and Reserved space *\n"); 984 985 printf("%-3d : %02x %s\n", 62, spd->spd_rev, 986 " spd->spd_rev, * 62 SPD Data Revision Code *"); 987 printf("%-3d : %02x %s\n", 63, spd->cksum, 988 " spd->cksum, * 63 Checksum for bytes 0-62 *"); 989 printf("%-3d-%3d: ", 64, 71); 990 991 for (i = 0; i < 8; i++) 992 printf("%02x", spd->mid[i]); 993 994 printf("* 64 Mfr's JEDEC ID code per JEP-108E *\n"); 995 printf("%-3d : %02x %s\n", 72, spd->mloc, 996 " spd->mloc, * 72 Manufacturing Location *"); 997 998 printf("%-3d-%3d: >>", 73, 90); 999 1000 for (i = 0; i < 18; i++) 1001 printf("%c", spd->mpart[i]); 1002 1003 printf("<<* 73 Manufacturer's Part Number *\n"); 1004 1005 printf("%-3d-%3d: %02x %02x %s\n", 91, 92, spd->rev[0], spd->rev[1], 1006 "* 91 Revision Code *"); 1007 printf("%-3d-%3d: %02x %02x %s\n", 93, 94, spd->mdate[0], spd->mdate[1], 1008 "* 93 Manufacturing Date *"); 1009 printf("%-3d-%3d: ", 95, 98); 1010 1011 for (i = 0; i < 4; i++) 1012 printf("%02x", spd->sernum[i]); 1013 1014 printf("* 95 Assembly Serial Number *\n"); 1015 1016 printf("%-3d-%3d: ", 99, 127); 1017 1018 for (i = 0; i < 27; i++) 1019 printf("%02x", spd->mspec[i]); 1020 1021 printf("* 99 Manufacturer Specific Data *\n"); 1022 } 1023 #endif 1024 1025 #ifdef CONFIG_SYS_FSL_DDR2 1026 void ddr2_spd_dump(const ddr2_spd_eeprom_t *spd) 1027 { 1028 unsigned int i; 1029 1030 printf("%-3d : %02x %s\n", 0, spd->info_size, 1031 " spd->info_size, * 0 # bytes written into serial memory *"); 1032 printf("%-3d : %02x %s\n", 1, spd->chip_size, 1033 " spd->chip_size, * 1 Total # bytes of SPD memory device *"); 1034 printf("%-3d : %02x %s\n", 2, spd->mem_type, 1035 " spd->mem_type, * 2 Fundamental memory type *"); 1036 printf("%-3d : %02x %s\n", 3, spd->nrow_addr, 1037 " spd->nrow_addr, * 3 # of Row Addresses on this assembly *"); 1038 printf("%-3d : %02x %s\n", 4, spd->ncol_addr, 1039 " spd->ncol_addr, * 4 # of Column Addrs on this assembly *"); 1040 printf("%-3d : %02x %s\n", 5, spd->mod_ranks, 1041 " spd->mod_ranks * 5 # of Module Rows on this assembly *"); 1042 printf("%-3d : %02x %s\n", 6, spd->dataw, 1043 " spd->dataw, * 6 Data Width of this assembly *"); 1044 printf("%-3d : %02x %s\n", 7, spd->res_7, 1045 " spd->res_7, * 7 Reserved *"); 1046 printf("%-3d : %02x %s\n", 8, spd->voltage, 1047 " spd->voltage, * 8 Voltage intf std of this assembly *"); 1048 printf("%-3d : %02x %s\n", 9, spd->clk_cycle, 1049 " spd->clk_cycle, * 9 SDRAM Cycle time at CL=X *"); 1050 printf("%-3d : %02x %s\n", 10, spd->clk_access, 1051 " spd->clk_access, * 10 SDRAM Access from Clock at CL=X *"); 1052 printf("%-3d : %02x %s\n", 11, spd->config, 1053 " spd->config, * 11 DIMM Configuration type *"); 1054 printf("%-3d : %02x %s\n", 12, spd->refresh, 1055 " spd->refresh, * 12 Refresh Rate/Type *"); 1056 printf("%-3d : %02x %s\n", 13, spd->primw, 1057 " spd->primw, * 13 Primary SDRAM Width *"); 1058 printf("%-3d : %02x %s\n", 14, spd->ecw, 1059 " spd->ecw, * 14 Error Checking SDRAM width *"); 1060 printf("%-3d : %02x %s\n", 15, spd->res_15, 1061 " spd->res_15, * 15 Reserved *"); 1062 printf("%-3d : %02x %s\n", 16, spd->burstl, 1063 " spd->burstl, * 16 Burst Lengths Supported *"); 1064 printf("%-3d : %02x %s\n", 17, spd->nbanks, 1065 " spd->nbanks, * 17 # of Banks on Each SDRAM Device *"); 1066 printf("%-3d : %02x %s\n", 18, spd->cas_lat, 1067 " spd->cas_lat, * 18 CAS# Latencies Supported *"); 1068 printf("%-3d : %02x %s\n", 19, spd->mech_char, 1069 " spd->mech_char, * 19 Mechanical Characteristics *"); 1070 printf("%-3d : %02x %s\n", 20, spd->dimm_type, 1071 " spd->dimm_type, * 20 DIMM type *"); 1072 printf("%-3d : %02x %s\n", 21, spd->mod_attr, 1073 " spd->mod_attr, * 21 SDRAM Module Attributes *"); 1074 printf("%-3d : %02x %s\n", 22, spd->dev_attr, 1075 " spd->dev_attr, * 22 SDRAM Device Attributes *"); 1076 printf("%-3d : %02x %s\n", 23, spd->clk_cycle2, 1077 " spd->clk_cycle2, * 23 Min SDRAM Cycle time at CL=X-1 *"); 1078 printf("%-3d : %02x %s\n", 24, spd->clk_access2, 1079 " spd->clk_access2, * 24 SDRAM Access from Clock at CL=X-1 *"); 1080 printf("%-3d : %02x %s\n", 25, spd->clk_cycle3, 1081 " spd->clk_cycle3, * 25 Min SDRAM Cycle time at CL=X-2 *"); 1082 printf("%-3d : %02x %s\n", 26, spd->clk_access3, 1083 " spd->clk_access3, * 26 Max Access from Clock at CL=X-2 *"); 1084 printf("%-3d : %02x %s\n", 27, spd->trp, 1085 " spd->trp, * 27 Min Row Precharge Time (tRP)*"); 1086 printf("%-3d : %02x %s\n", 28, spd->trrd, 1087 " spd->trrd, * 28 Min Row Active to Row Active (tRRD) *"); 1088 printf("%-3d : %02x %s\n", 29, spd->trcd, 1089 " spd->trcd, * 29 Min RAS to CAS Delay (tRCD) *"); 1090 printf("%-3d : %02x %s\n", 30, spd->tras, 1091 " spd->tras, * 30 Minimum RAS Pulse Width (tRAS) *"); 1092 printf("%-3d : %02x %s\n", 31, spd->rank_dens, 1093 " spd->rank_dens, * 31 Density of each rank on module *"); 1094 printf("%-3d : %02x %s\n", 32, spd->ca_setup, 1095 " spd->ca_setup, * 32 Cmd + Addr signal input setup time *"); 1096 printf("%-3d : %02x %s\n", 33, spd->ca_hold, 1097 " spd->ca_hold, * 33 Cmd and Addr signal input hold time *"); 1098 printf("%-3d : %02x %s\n", 34, spd->data_setup, 1099 " spd->data_setup, * 34 Data signal input setup time *"); 1100 printf("%-3d : %02x %s\n", 35, spd->data_hold, 1101 " spd->data_hold, * 35 Data signal input hold time *"); 1102 printf("%-3d : %02x %s\n", 36, spd->twr, 1103 " spd->twr, * 36 Write Recovery time tWR *"); 1104 printf("%-3d : %02x %s\n", 37, spd->twtr, 1105 " spd->twtr, * 37 Int write to read delay tWTR *"); 1106 printf("%-3d : %02x %s\n", 38, spd->trtp, 1107 " spd->trtp, * 38 Int read to precharge delay tRTP *"); 1108 printf("%-3d : %02x %s\n", 39, spd->mem_probe, 1109 " spd->mem_probe, * 39 Mem analysis probe characteristics *"); 1110 printf("%-3d : %02x %s\n", 40, spd->trctrfc_ext, 1111 " spd->trctrfc_ext, * 40 Extensions to trc and trfc *"); 1112 printf("%-3d : %02x %s\n", 41, spd->trc, 1113 " spd->trc, * 41 Min Active to Auto refresh time tRC *"); 1114 printf("%-3d : %02x %s\n", 42, spd->trfc, 1115 " spd->trfc, * 42 Min Auto to Active period tRFC *"); 1116 printf("%-3d : %02x %s\n", 43, spd->tckmax, 1117 " spd->tckmax, * 43 Max device cycle time tCKmax *"); 1118 printf("%-3d : %02x %s\n", 44, spd->tdqsq, 1119 " spd->tdqsq, * 44 Max DQS to DQ skew *"); 1120 printf("%-3d : %02x %s\n", 45, spd->tqhs, 1121 " spd->tqhs, * 45 Max Read DataHold skew tQHS *"); 1122 printf("%-3d : %02x %s\n", 46, spd->pll_relock, 1123 " spd->pll_relock, * 46 PLL Relock time *"); 1124 printf("%-3d : %02x %s\n", 47, spd->t_casemax, 1125 " spd->t_casemax, * 47 t_casemax *"); 1126 printf("%-3d : %02x %s\n", 48, spd->psi_ta_dram, 1127 " spd->psi_ta_dram, * 48 Thermal Resistance of DRAM Package " 1128 "from Top (Case) to Ambient (Psi T-A DRAM) *"); 1129 printf("%-3d : %02x %s\n", 49, spd->dt0_mode, 1130 " spd->dt0_mode, * 49 DRAM Case Temperature Rise from " 1131 "Ambient due to Activate-Precharge/Mode Bits " 1132 "(DT0/Mode Bits) *)"); 1133 printf("%-3d : %02x %s\n", 50, spd->dt2n_dt2q, 1134 " spd->dt2n_dt2q, * 50 DRAM Case Temperature Rise from " 1135 "Ambient due to Precharge/Quiet Standby " 1136 "(DT2N/DT2Q) *"); 1137 printf("%-3d : %02x %s\n", 51, spd->dt2p, 1138 " spd->dt2p, * 51 DRAM Case Temperature Rise from " 1139 "Ambient due to Precharge Power-Down (DT2P) *"); 1140 printf("%-3d : %02x %s\n", 52, spd->dt3n, 1141 " spd->dt3n, * 52 DRAM Case Temperature Rise from " 1142 "Ambient due to Active Standby (DT3N) *"); 1143 printf("%-3d : %02x %s\n", 53, spd->dt3pfast, 1144 " spd->dt3pfast, * 53 DRAM Case Temperature Rise from " 1145 "Ambient due to Active Power-Down with Fast PDN Exit " 1146 "(DT3Pfast) *"); 1147 printf("%-3d : %02x %s\n", 54, spd->dt3pslow, 1148 " spd->dt3pslow, * 54 DRAM Case Temperature Rise from " 1149 "Ambient due to Active Power-Down with Slow PDN Exit " 1150 "(DT3Pslow) *"); 1151 printf("%-3d : %02x %s\n", 55, spd->dt4r_dt4r4w, 1152 " spd->dt4r_dt4r4w, * 55 DRAM Case Temperature Rise from " 1153 "Ambient due to Page Open Burst Read/DT4R4W Mode Bit " 1154 "(DT4R/DT4R4W Mode Bit) *"); 1155 printf("%-3d : %02x %s\n", 56, spd->dt5b, 1156 " spd->dt5b, * 56 DRAM Case Temperature Rise from " 1157 "Ambient due to Burst Refresh (DT5B) *"); 1158 printf("%-3d : %02x %s\n", 57, spd->dt7, 1159 " spd->dt7, * 57 DRAM Case Temperature Rise from " 1160 "Ambient due to Bank Interleave Reads with " 1161 "Auto-Precharge (DT7) *"); 1162 printf("%-3d : %02x %s\n", 58, spd->psi_ta_pll, 1163 " spd->psi_ta_pll, * 58 Thermal Resistance of PLL Package form" 1164 " Top (Case) to Ambient (Psi T-A PLL) *"); 1165 printf("%-3d : %02x %s\n", 59, spd->psi_ta_reg, 1166 " spd->psi_ta_reg, * 59 Thermal Reisitance of Register Package" 1167 " from Top (Case) to Ambient (Psi T-A Register) *"); 1168 printf("%-3d : %02x %s\n", 60, spd->dtpllactive, 1169 " spd->dtpllactive, * 60 PLL Case Temperature Rise from " 1170 "Ambient due to PLL Active (DT PLL Active) *"); 1171 printf("%-3d : %02x %s\n", 61, spd->dtregact, 1172 " spd->dtregact, " 1173 "* 61 Register Case Temperature Rise from Ambient due to " 1174 "Register Active/Mode Bit (DT Register Active/Mode Bit) *"); 1175 printf("%-3d : %02x %s\n", 62, spd->spd_rev, 1176 " spd->spd_rev, * 62 SPD Data Revision Code *"); 1177 printf("%-3d : %02x %s\n", 63, spd->cksum, 1178 " spd->cksum, * 63 Checksum for bytes 0-62 *"); 1179 1180 printf("%-3d-%3d: ", 64, 71); 1181 1182 for (i = 0; i < 8; i++) 1183 printf("%02x", spd->mid[i]); 1184 1185 printf("* 64 Mfr's JEDEC ID code per JEP-108E *\n"); 1186 1187 printf("%-3d : %02x %s\n", 72, spd->mloc, 1188 " spd->mloc, * 72 Manufacturing Location *"); 1189 1190 printf("%-3d-%3d: >>", 73, 90); 1191 for (i = 0; i < 18; i++) 1192 printf("%c", spd->mpart[i]); 1193 1194 1195 printf("<<* 73 Manufacturer's Part Number *\n"); 1196 1197 printf("%-3d-%3d: %02x %02x %s\n", 91, 92, spd->rev[0], spd->rev[1], 1198 "* 91 Revision Code *"); 1199 printf("%-3d-%3d: %02x %02x %s\n", 93, 94, spd->mdate[0], spd->mdate[1], 1200 "* 93 Manufacturing Date *"); 1201 printf("%-3d-%3d: ", 95, 98); 1202 1203 for (i = 0; i < 4; i++) 1204 printf("%02x", spd->sernum[i]); 1205 1206 printf("* 95 Assembly Serial Number *\n"); 1207 1208 printf("%-3d-%3d: ", 99, 127); 1209 for (i = 0; i < 27; i++) 1210 printf("%02x", spd->mspec[i]); 1211 1212 1213 printf("* 99 Manufacturer Specific Data *\n"); 1214 } 1215 #endif 1216 1217 #ifdef CONFIG_SYS_FSL_DDR3 1218 void ddr3_spd_dump(const ddr3_spd_eeprom_t *spd) 1219 { 1220 unsigned int i; 1221 1222 /* General Section: Bytes 0-59 */ 1223 1224 #define PRINT_NXS(x, y, z...) printf("%-3d : %02x " z "\n", x, (u8)y); 1225 #define PRINT_NNXXS(n0, n1, x0, x1, s) \ 1226 printf("%-3d-%3d: %02x %02x " s "\n", n0, n1, x0, x1); 1227 1228 PRINT_NXS(0, spd->info_size_crc, 1229 "info_size_crc bytes written into serial memory, " 1230 "CRC coverage"); 1231 PRINT_NXS(1, spd->spd_rev, 1232 "spd_rev SPD Revision"); 1233 PRINT_NXS(2, spd->mem_type, 1234 "mem_type Key Byte / DRAM Device Type"); 1235 PRINT_NXS(3, spd->module_type, 1236 "module_type Key Byte / Module Type"); 1237 PRINT_NXS(4, spd->density_banks, 1238 "density_banks SDRAM Density and Banks"); 1239 PRINT_NXS(5, spd->addressing, 1240 "addressing SDRAM Addressing"); 1241 PRINT_NXS(6, spd->module_vdd, 1242 "module_vdd Module Nominal Voltage, VDD"); 1243 PRINT_NXS(7, spd->organization, 1244 "organization Module Organization"); 1245 PRINT_NXS(8, spd->bus_width, 1246 "bus_width Module Memory Bus Width"); 1247 PRINT_NXS(9, spd->ftb_div, 1248 "ftb_div Fine Timebase (FTB) Dividend / Divisor"); 1249 PRINT_NXS(10, spd->mtb_dividend, 1250 "mtb_dividend Medium Timebase (MTB) Dividend"); 1251 PRINT_NXS(11, spd->mtb_divisor, 1252 "mtb_divisor Medium Timebase (MTB) Divisor"); 1253 PRINT_NXS(12, spd->tck_min, 1254 "tck_min SDRAM Minimum Cycle Time"); 1255 PRINT_NXS(13, spd->res_13, 1256 "res_13 Reserved"); 1257 PRINT_NXS(14, spd->caslat_lsb, 1258 "caslat_lsb CAS Latencies Supported, LSB"); 1259 PRINT_NXS(15, spd->caslat_msb, 1260 "caslat_msb CAS Latencies Supported, MSB"); 1261 PRINT_NXS(16, spd->taa_min, 1262 "taa_min Min CAS Latency Time"); 1263 PRINT_NXS(17, spd->twr_min, 1264 "twr_min Min Write REcovery Time"); 1265 PRINT_NXS(18, spd->trcd_min, 1266 "trcd_min Min RAS# to CAS# Delay Time"); 1267 PRINT_NXS(19, spd->trrd_min, 1268 "trrd_min Min Row Active to Row Active Delay Time"); 1269 PRINT_NXS(20, spd->trp_min, 1270 "trp_min Min Row Precharge Delay Time"); 1271 PRINT_NXS(21, spd->tras_trc_ext, 1272 "tras_trc_ext Upper Nibbles for tRAS and tRC"); 1273 PRINT_NXS(22, spd->tras_min_lsb, 1274 "tras_min_lsb Min Active to Precharge Delay Time, LSB"); 1275 PRINT_NXS(23, spd->trc_min_lsb, 1276 "trc_min_lsb Min Active to Active/Refresh Delay Time, LSB"); 1277 PRINT_NXS(24, spd->trfc_min_lsb, 1278 "trfc_min_lsb Min Refresh Recovery Delay Time LSB"); 1279 PRINT_NXS(25, spd->trfc_min_msb, 1280 "trfc_min_msb Min Refresh Recovery Delay Time MSB"); 1281 PRINT_NXS(26, spd->twtr_min, 1282 "twtr_min Min Internal Write to Read Command Delay Time"); 1283 PRINT_NXS(27, spd->trtp_min, 1284 "trtp_min " 1285 "Min Internal Read to Precharge Command Delay Time"); 1286 PRINT_NXS(28, spd->tfaw_msb, 1287 "tfaw_msb Upper Nibble for tFAW"); 1288 PRINT_NXS(29, spd->tfaw_min, 1289 "tfaw_min Min Four Activate Window Delay Time"); 1290 PRINT_NXS(30, spd->opt_features, 1291 "opt_features SDRAM Optional Features"); 1292 PRINT_NXS(31, spd->therm_ref_opt, 1293 "therm_ref_opt SDRAM Thermal and Refresh Opts"); 1294 PRINT_NXS(32, spd->therm_sensor, 1295 "therm_sensor SDRAM Thermal Sensor"); 1296 PRINT_NXS(33, spd->device_type, 1297 "device_type SDRAM Device Type"); 1298 PRINT_NXS(34, spd->fine_tck_min, 1299 "fine_tck_min Fine offset for tCKmin"); 1300 PRINT_NXS(35, spd->fine_taa_min, 1301 "fine_taa_min Fine offset for tAAmin"); 1302 PRINT_NXS(36, spd->fine_trcd_min, 1303 "fine_trcd_min Fine offset for tRCDmin"); 1304 PRINT_NXS(37, spd->fine_trp_min, 1305 "fine_trp_min Fine offset for tRPmin"); 1306 PRINT_NXS(38, spd->fine_trc_min, 1307 "fine_trc_min Fine offset for tRCmin"); 1308 1309 printf("%-3d-%3d: ", 39, 59); /* Reserved, General Section */ 1310 1311 for (i = 39; i <= 59; i++) 1312 printf("%02x ", spd->res_39_59[i - 39]); 1313 1314 puts("\n"); 1315 1316 switch (spd->module_type) { 1317 case 0x02: /* UDIMM */ 1318 case 0x03: /* SO-DIMM */ 1319 case 0x04: /* Micro-DIMM */ 1320 case 0x06: /* Mini-UDIMM */ 1321 PRINT_NXS(60, spd->mod_section.unbuffered.mod_height, 1322 "mod_height (Unbuffered) Module Nominal Height"); 1323 PRINT_NXS(61, spd->mod_section.unbuffered.mod_thickness, 1324 "mod_thickness (Unbuffered) Module Maximum Thickness"); 1325 PRINT_NXS(62, spd->mod_section.unbuffered.ref_raw_card, 1326 "ref_raw_card (Unbuffered) Reference Raw Card Used"); 1327 PRINT_NXS(63, spd->mod_section.unbuffered.addr_mapping, 1328 "addr_mapping (Unbuffered) Address mapping from " 1329 "Edge Connector to DRAM"); 1330 break; 1331 case 0x01: /* RDIMM */ 1332 case 0x05: /* Mini-RDIMM */ 1333 PRINT_NXS(60, spd->mod_section.registered.mod_height, 1334 "mod_height (Registered) Module Nominal Height"); 1335 PRINT_NXS(61, spd->mod_section.registered.mod_thickness, 1336 "mod_thickness (Registered) Module Maximum Thickness"); 1337 PRINT_NXS(62, spd->mod_section.registered.ref_raw_card, 1338 "ref_raw_card (Registered) Reference Raw Card Used"); 1339 PRINT_NXS(63, spd->mod_section.registered.modu_attr, 1340 "modu_attr (Registered) DIMM Module Attributes"); 1341 PRINT_NXS(64, spd->mod_section.registered.thermal, 1342 "thermal (Registered) Thermal Heat " 1343 "Spreader Solution"); 1344 PRINT_NXS(65, spd->mod_section.registered.reg_id_lo, 1345 "reg_id_lo (Registered) Register Manufacturer ID " 1346 "Code, LSB"); 1347 PRINT_NXS(66, spd->mod_section.registered.reg_id_hi, 1348 "reg_id_hi (Registered) Register Manufacturer ID " 1349 "Code, MSB"); 1350 PRINT_NXS(67, spd->mod_section.registered.reg_rev, 1351 "reg_rev (Registered) Register " 1352 "Revision Number"); 1353 PRINT_NXS(68, spd->mod_section.registered.reg_type, 1354 "reg_type (Registered) Register Type"); 1355 for (i = 69; i <= 76; i++) { 1356 printf("%-3d : %02x rcw[%d]\n", i, 1357 spd->mod_section.registered.rcw[i-69], i-69); 1358 } 1359 break; 1360 default: 1361 /* Module-specific Section, Unsupported Module Type */ 1362 printf("%-3d-%3d: ", 60, 116); 1363 1364 for (i = 60; i <= 116; i++) 1365 printf("%02x", spd->mod_section.uc[i - 60]); 1366 1367 break; 1368 } 1369 1370 /* Unique Module ID: Bytes 117-125 */ 1371 PRINT_NXS(117, spd->mmid_lsb, "Module MfgID Code LSB - JEP-106"); 1372 PRINT_NXS(118, spd->mmid_msb, "Module MfgID Code MSB - JEP-106"); 1373 PRINT_NXS(119, spd->mloc, "Mfg Location"); 1374 PRINT_NNXXS(120, 121, spd->mdate[0], spd->mdate[1], "Mfg Date"); 1375 1376 printf("%-3d-%3d: ", 122, 125); 1377 1378 for (i = 122; i <= 125; i++) 1379 printf("%02x ", spd->sernum[i - 122]); 1380 printf(" Module Serial Number\n"); 1381 1382 /* CRC: Bytes 126-127 */ 1383 PRINT_NNXXS(126, 127, spd->crc[0], spd->crc[1], " SPD CRC"); 1384 1385 /* Other Manufacturer Fields and User Space: Bytes 128-255 */ 1386 printf("%-3d-%3d: ", 128, 145); 1387 for (i = 128; i <= 145; i++) 1388 printf("%02x ", spd->mpart[i - 128]); 1389 printf(" Mfg's Module Part Number\n"); 1390 1391 PRINT_NNXXS(146, 147, spd->mrev[0], spd->mrev[1], 1392 "Module Revision code"); 1393 1394 PRINT_NXS(148, spd->dmid_lsb, "DRAM MfgID Code LSB - JEP-106"); 1395 PRINT_NXS(149, spd->dmid_msb, "DRAM MfgID Code MSB - JEP-106"); 1396 1397 printf("%-3d-%3d: ", 150, 175); 1398 for (i = 150; i <= 175; i++) 1399 printf("%02x ", spd->msd[i - 150]); 1400 printf(" Mfg's Specific Data\n"); 1401 1402 printf("%-3d-%3d: ", 176, 255); 1403 for (i = 176; i <= 255; i++) 1404 printf("%02x", spd->cust[i - 176]); 1405 printf(" Mfg's Specific Data\n"); 1406 1407 } 1408 #endif 1409 1410 #ifdef CONFIG_SYS_FSL_DDR4 1411 void ddr4_spd_dump(const struct ddr4_spd_eeprom_s *spd) 1412 { 1413 unsigned int i; 1414 1415 /* General Section: Bytes 0-127 */ 1416 1417 #define PRINT_NXS(x, y, z...) printf("%-3d : %02x " z "\n", x, (u8)y); 1418 #define PRINT_NNXXS(n0, n1, x0, x1, s) \ 1419 printf("%-3d-%3d: %02x %02x " s "\n", n0, n1, x0, x1); 1420 1421 PRINT_NXS(0, spd->info_size_crc, 1422 "info_size_crc bytes written into serial memory, CRC coverage"); 1423 PRINT_NXS(1, spd->spd_rev, 1424 "spd_rev SPD Revision"); 1425 PRINT_NXS(2, spd->mem_type, 1426 "mem_type Key Byte / DRAM Device Type"); 1427 PRINT_NXS(3, spd->module_type, 1428 "module_type Key Byte / Module Type"); 1429 PRINT_NXS(4, spd->density_banks, 1430 "density_banks SDRAM Density and Banks"); 1431 PRINT_NXS(5, spd->addressing, 1432 "addressing SDRAM Addressing"); 1433 PRINT_NXS(6, spd->package_type, 1434 "package_type Package type"); 1435 PRINT_NXS(7, spd->opt_feature, 1436 "opt_feature Optional features"); 1437 PRINT_NXS(8, spd->thermal_ref, 1438 "thermal_ref Thermal and Refresh options"); 1439 PRINT_NXS(9, spd->oth_opt_features, 1440 "oth_opt_features Other SDRAM optional features"); 1441 PRINT_NXS(10, spd->res_10, 1442 "res_10 Reserved"); 1443 PRINT_NXS(11, spd->module_vdd, 1444 "module_vdd Module Nominal Voltage, VDD"); 1445 PRINT_NXS(12, spd->organization, 1446 "organization Module Organization"); 1447 PRINT_NXS(13, spd->bus_width, 1448 "bus_width Module Memory Bus Width"); 1449 PRINT_NXS(14, spd->therm_sensor, 1450 "therm_sensor Module Thermal Sensor"); 1451 PRINT_NXS(15, spd->ext_type, 1452 "ext_type Extended module type"); 1453 PRINT_NXS(16, spd->res_16, 1454 "res_16 Reserved"); 1455 PRINT_NXS(17, spd->timebases, 1456 "timebases MTb and FTB"); 1457 PRINT_NXS(18, spd->tck_min, 1458 "tck_min tCKAVGmin"); 1459 PRINT_NXS(19, spd->tck_max, 1460 "tck_max TCKAVGmax"); 1461 PRINT_NXS(20, spd->caslat_b1, 1462 "caslat_b1 CAS latencies, 1st byte"); 1463 PRINT_NXS(21, spd->caslat_b2, 1464 "caslat_b2 CAS latencies, 2nd byte"); 1465 PRINT_NXS(22, spd->caslat_b3, 1466 "caslat_b3 CAS latencies, 3rd byte "); 1467 PRINT_NXS(23, spd->caslat_b4, 1468 "caslat_b4 CAS latencies, 4th byte"); 1469 PRINT_NXS(24, spd->taa_min, 1470 "taa_min Min CAS Latency Time"); 1471 PRINT_NXS(25, spd->trcd_min, 1472 "trcd_min Min RAS# to CAS# Delay Time"); 1473 PRINT_NXS(26, spd->trp_min, 1474 "trp_min Min Row Precharge Delay Time"); 1475 PRINT_NXS(27, spd->tras_trc_ext, 1476 "tras_trc_ext Upper Nibbles for tRAS and tRC"); 1477 PRINT_NXS(28, spd->tras_min_lsb, 1478 "tras_min_lsb tRASmin, lsb"); 1479 PRINT_NXS(29, spd->trc_min_lsb, 1480 "trc_min_lsb tRCmin, lsb"); 1481 PRINT_NXS(30, spd->trfc1_min_lsb, 1482 "trfc1_min_lsb Min Refresh Recovery Delay Time, LSB"); 1483 PRINT_NXS(31, spd->trfc1_min_msb, 1484 "trfc1_min_msb Min Refresh Recovery Delay Time, MSB "); 1485 PRINT_NXS(32, spd->trfc2_min_lsb, 1486 "trfc2_min_lsb Min Refresh Recovery Delay Time, LSB"); 1487 PRINT_NXS(33, spd->trfc2_min_msb, 1488 "trfc2_min_msb Min Refresh Recovery Delay Time, MSB"); 1489 PRINT_NXS(34, spd->trfc4_min_lsb, 1490 "trfc4_min_lsb Min Refresh Recovery Delay Time, LSB"); 1491 PRINT_NXS(35, spd->trfc4_min_msb, 1492 "trfc4_min_msb Min Refresh Recovery Delay Time, MSB"); 1493 PRINT_NXS(36, spd->tfaw_msb, 1494 "tfaw_msb Upper Nibble for tFAW"); 1495 PRINT_NXS(37, spd->tfaw_min, 1496 "tfaw_min tFAW, lsb"); 1497 PRINT_NXS(38, spd->trrds_min, 1498 "trrds_min tRRD_Smin, MTB"); 1499 PRINT_NXS(39, spd->trrdl_min, 1500 "trrdl_min tRRD_Lmin, MTB"); 1501 PRINT_NXS(40, spd->tccdl_min, 1502 "tccdl_min tCCS_Lmin, MTB"); 1503 1504 printf("%-3d-%3d: ", 41, 59); /* Reserved, General Section */ 1505 for (i = 41; i <= 59; i++) 1506 printf("%02x ", spd->res_41[i - 41]); 1507 1508 puts("\n"); 1509 printf("%-3d-%3d: ", 60, 77); 1510 for (i = 60; i <= 77; i++) 1511 printf("%02x ", spd->mapping[i - 60]); 1512 puts(" mapping[] Connector to SDRAM bit map\n"); 1513 1514 PRINT_NXS(117, spd->fine_tccdl_min, 1515 "fine_tccdl_min Fine offset for tCCD_Lmin"); 1516 PRINT_NXS(118, spd->fine_trrdl_min, 1517 "fine_trrdl_min Fine offset for tRRD_Lmin"); 1518 PRINT_NXS(119, spd->fine_trrds_min, 1519 "fine_trrds_min Fine offset for tRRD_Smin"); 1520 PRINT_NXS(120, spd->fine_trc_min, 1521 "fine_trc_min Fine offset for tRCmin"); 1522 PRINT_NXS(121, spd->fine_trp_min, 1523 "fine_trp_min Fine offset for tRPmin"); 1524 PRINT_NXS(122, spd->fine_trcd_min, 1525 "fine_trcd_min Fine offset for tRCDmin"); 1526 PRINT_NXS(123, spd->fine_taa_min, 1527 "fine_taa_min Fine offset for tAAmin"); 1528 PRINT_NXS(124, spd->fine_tck_max, 1529 "fine_tck_max Fine offset for tCKAVGmax"); 1530 PRINT_NXS(125, spd->fine_tck_min, 1531 "fine_tck_min Fine offset for tCKAVGmin"); 1532 1533 /* CRC: Bytes 126-127 */ 1534 PRINT_NNXXS(126, 127, spd->crc[0], spd->crc[1], " SPD CRC"); 1535 1536 switch (spd->module_type) { 1537 case 0x02: /* UDIMM */ 1538 case 0x03: /* SO-DIMM */ 1539 PRINT_NXS(128, spd->mod_section.unbuffered.mod_height, 1540 "mod_height (Unbuffered) Module Nominal Height"); 1541 PRINT_NXS(129, spd->mod_section.unbuffered.mod_thickness, 1542 "mod_thickness (Unbuffered) Module Maximum Thickness"); 1543 PRINT_NXS(130, spd->mod_section.unbuffered.ref_raw_card, 1544 "ref_raw_card (Unbuffered) Reference Raw Card Used"); 1545 PRINT_NXS(131, spd->mod_section.unbuffered.addr_mapping, 1546 "addr_mapping (Unbuffered) Address mapping from Edge Connector to DRAM"); 1547 PRINT_NNXXS(254, 255, spd->mod_section.unbuffered.crc[0], 1548 spd->mod_section.unbuffered.crc[1], " Module CRC"); 1549 break; 1550 case 0x01: /* RDIMM */ 1551 PRINT_NXS(128, spd->mod_section.registered.mod_height, 1552 "mod_height (Registered) Module Nominal Height"); 1553 PRINT_NXS(129, spd->mod_section.registered.mod_thickness, 1554 "mod_thickness (Registered) Module Maximum Thickness"); 1555 PRINT_NXS(130, spd->mod_section.registered.ref_raw_card, 1556 "ref_raw_card (Registered) Reference Raw Card Used"); 1557 PRINT_NXS(131, spd->mod_section.registered.modu_attr, 1558 "modu_attr (Registered) DIMM Module Attributes"); 1559 PRINT_NXS(132, spd->mod_section.registered.thermal, 1560 "thermal (Registered) Thermal Heat Spreader Solution"); 1561 PRINT_NXS(133, spd->mod_section.registered.reg_id_lo, 1562 "reg_id_lo (Registered) Register Manufacturer ID Code, LSB"); 1563 PRINT_NXS(134, spd->mod_section.registered.reg_id_hi, 1564 "reg_id_hi (Registered) Register Manufacturer ID Code, MSB"); 1565 PRINT_NXS(135, spd->mod_section.registered.reg_rev, 1566 "reg_rev (Registered) Register Revision Number"); 1567 PRINT_NXS(136, spd->mod_section.registered.reg_map, 1568 "reg_map (Registered) Address mapping"); 1569 PRINT_NNXXS(254, 255, spd->mod_section.registered.crc[0], 1570 spd->mod_section.registered.crc[1], " Module CRC"); 1571 break; 1572 case 0x04: /* LRDIMM */ 1573 PRINT_NXS(128, spd->mod_section.loadreduced.mod_height, 1574 "mod_height (Loadreduced) Module Nominal Height"); 1575 PRINT_NXS(129, spd->mod_section.loadreduced.mod_thickness, 1576 "mod_thickness (Loadreduced) Module Maximum Thickness"); 1577 PRINT_NXS(130, spd->mod_section.loadreduced.ref_raw_card, 1578 "ref_raw_card (Loadreduced) Reference Raw Card Used"); 1579 PRINT_NXS(131, spd->mod_section.loadreduced.modu_attr, 1580 "modu_attr (Loadreduced) DIMM Module Attributes"); 1581 PRINT_NXS(132, spd->mod_section.loadreduced.thermal, 1582 "thermal (Loadreduced) Thermal Heat Spreader Solution"); 1583 PRINT_NXS(133, spd->mod_section.loadreduced.reg_id_lo, 1584 "reg_id_lo (Loadreduced) Register Manufacturer ID Code, LSB"); 1585 PRINT_NXS(134, spd->mod_section.loadreduced.reg_id_hi, 1586 "reg_id_hi (Loadreduced) Register Manufacturer ID Code, MSB"); 1587 PRINT_NXS(135, spd->mod_section.loadreduced.reg_rev, 1588 "reg_rev (Loadreduced) Register Revision Number"); 1589 PRINT_NXS(136, spd->mod_section.loadreduced.reg_map, 1590 "reg_map (Loadreduced) Address mapping"); 1591 PRINT_NXS(137, spd->mod_section.loadreduced.reg_drv, 1592 "reg_drv (Loadreduced) Reg output drive strength"); 1593 PRINT_NXS(138, spd->mod_section.loadreduced.reg_drv_ck, 1594 "reg_drv_ck (Loadreduced) Reg output drive strength for CK"); 1595 PRINT_NXS(139, spd->mod_section.loadreduced.data_buf_rev, 1596 "data_buf_rev (Loadreduced) Data Buffer Revision Numbe"); 1597 PRINT_NXS(140, spd->mod_section.loadreduced.vrefqe_r0, 1598 "vrefqe_r0 (Loadreduced) DRAM VrefDQ for Package Rank 0"); 1599 PRINT_NXS(141, spd->mod_section.loadreduced.vrefqe_r1, 1600 "vrefqe_r1 (Loadreduced) DRAM VrefDQ for Package Rank 1"); 1601 PRINT_NXS(142, spd->mod_section.loadreduced.vrefqe_r2, 1602 "vrefqe_r2 (Loadreduced) DRAM VrefDQ for Package Rank 2"); 1603 PRINT_NXS(143, spd->mod_section.loadreduced.vrefqe_r3, 1604 "vrefqe_r3 (Loadreduced) DRAM VrefDQ for Package Rank 3"); 1605 PRINT_NXS(144, spd->mod_section.loadreduced.data_intf, 1606 "data_intf (Loadreduced) Data Buffer VrefDQ for DRAM Interface"); 1607 PRINT_NXS(145, spd->mod_section.loadreduced.data_drv_1866, 1608 "data_drv_1866 (Loadreduced) Data Buffer MDQ Drive Strength and RTT"); 1609 PRINT_NXS(146, spd->mod_section.loadreduced.data_drv_2400, 1610 "data_drv_2400 (Loadreduced) Data Buffer MDQ Drive Strength and RTT"); 1611 PRINT_NXS(147, spd->mod_section.loadreduced.data_drv_3200, 1612 "data_drv_3200 (Loadreduced) Data Buffer MDQ Drive Strength and RTT"); 1613 PRINT_NXS(148, spd->mod_section.loadreduced.dram_drv, 1614 "dram_drv (Loadreduced) DRAM Drive Strength"); 1615 PRINT_NXS(149, spd->mod_section.loadreduced.dram_odt_1866, 1616 "dram_odt_1866 (Loadreduced) DRAM ODT (RTT_WR, RTT_NOM)"); 1617 PRINT_NXS(150, spd->mod_section.loadreduced.dram_odt_2400, 1618 "dram_odt_2400 (Loadreduced) DRAM ODT (RTT_WR, RTT_NOM)"); 1619 PRINT_NXS(151, spd->mod_section.loadreduced.dram_odt_3200, 1620 "dram_odt_3200 (Loadreduced) DRAM ODT (RTT_WR, RTT_NOM)"); 1621 PRINT_NXS(152, spd->mod_section.loadreduced.dram_odt_park_1866, 1622 "dram_odt_park_1866 (Loadreduced) DRAM ODT (RTT_PARK)"); 1623 PRINT_NXS(153, spd->mod_section.loadreduced.dram_odt_park_2400, 1624 "dram_odt_park_2400 (Loadreduced) DRAM ODT (RTT_PARK)"); 1625 PRINT_NXS(154, spd->mod_section.loadreduced.dram_odt_park_3200, 1626 "dram_odt_park_3200 (Loadreduced) DRAM ODT (RTT_PARK)"); 1627 PRINT_NNXXS(254, 255, spd->mod_section.loadreduced.crc[0], 1628 spd->mod_section.loadreduced.crc[1], 1629 " Module CRC"); 1630 break; 1631 default: 1632 /* Module-specific Section, Unsupported Module Type */ 1633 printf("%-3d-%3d: ", 128, 255); 1634 1635 for (i = 128; i <= 255; i++) 1636 printf("%02x", spd->mod_section.uc[i - 128]); 1637 1638 break; 1639 } 1640 1641 /* Unique Module ID: Bytes 320-383 */ 1642 PRINT_NXS(320, spd->mmid_lsb, "Module MfgID Code LSB - JEP-106"); 1643 PRINT_NXS(321, spd->mmid_msb, "Module MfgID Code MSB - JEP-106"); 1644 PRINT_NXS(322, spd->mloc, "Mfg Location"); 1645 PRINT_NNXXS(323, 324, spd->mdate[0], spd->mdate[1], "Mfg Date"); 1646 1647 printf("%-3d-%3d: ", 325, 328); 1648 1649 for (i = 325; i <= 328; i++) 1650 printf("%02x ", spd->sernum[i - 325]); 1651 printf(" Module Serial Number\n"); 1652 1653 printf("%-3d-%3d: ", 329, 348); 1654 for (i = 329; i <= 348; i++) 1655 printf("%02x ", spd->mpart[i - 329]); 1656 printf(" Mfg's Module Part Number\n"); 1657 1658 PRINT_NXS(349, spd->mrev, "Module Revision code"); 1659 PRINT_NXS(350, spd->dmid_lsb, "DRAM MfgID Code LSB - JEP-106"); 1660 PRINT_NXS(351, spd->dmid_msb, "DRAM MfgID Code MSB - JEP-106"); 1661 PRINT_NXS(352, spd->stepping, "DRAM stepping"); 1662 1663 printf("%-3d-%3d: ", 353, 381); 1664 for (i = 353; i <= 381; i++) 1665 printf("%02x ", spd->msd[i - 353]); 1666 printf(" Mfg's Specific Data\n"); 1667 } 1668 #endif 1669 1670 static inline void generic_spd_dump(const generic_spd_eeprom_t *spd) 1671 { 1672 #if defined(CONFIG_SYS_FSL_DDR1) 1673 ddr1_spd_dump(spd); 1674 #elif defined(CONFIG_SYS_FSL_DDR2) 1675 ddr2_spd_dump(spd); 1676 #elif defined(CONFIG_SYS_FSL_DDR3) 1677 ddr3_spd_dump(spd); 1678 #elif defined(CONFIG_SYS_FSL_DDR4) 1679 ddr4_spd_dump(spd); 1680 #endif 1681 } 1682 1683 static void fsl_ddr_printinfo(const fsl_ddr_info_t *pinfo, 1684 unsigned int ctrl_mask, 1685 unsigned int dimm_mask, 1686 unsigned int do_mask) 1687 { 1688 unsigned int i, j, retval; 1689 1690 /* STEP 1: DIMM SPD data */ 1691 if (do_mask & STEP_GET_SPD) { 1692 for (i = 0; i < CONFIG_SYS_NUM_DDR_CTLRS; i++) { 1693 if (!(ctrl_mask & (1 << i))) 1694 continue; 1695 1696 for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) { 1697 if (!(dimm_mask & (1 << j))) 1698 continue; 1699 1700 printf("SPD info: Controller=%u " 1701 "DIMM=%u\n", i, j); 1702 generic_spd_dump( 1703 &(pinfo->spd_installed_dimms[i][j])); 1704 printf("\n"); 1705 } 1706 printf("\n"); 1707 } 1708 printf("\n"); 1709 } 1710 1711 /* STEP 2: DIMM Parameters */ 1712 if (do_mask & STEP_COMPUTE_DIMM_PARMS) { 1713 for (i = 0; i < CONFIG_SYS_NUM_DDR_CTLRS; i++) { 1714 if (!(ctrl_mask & (1 << i))) 1715 continue; 1716 for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) { 1717 if (!(dimm_mask & (1 << j))) 1718 continue; 1719 printf("DIMM parameters: Controller=%u " 1720 "DIMM=%u\n", i, j); 1721 print_dimm_parameters( 1722 &(pinfo->dimm_params[i][j])); 1723 printf("\n"); 1724 } 1725 printf("\n"); 1726 } 1727 printf("\n"); 1728 } 1729 1730 /* STEP 3: Common Parameters */ 1731 if (do_mask & STEP_COMPUTE_COMMON_PARMS) { 1732 for (i = 0; i < CONFIG_SYS_NUM_DDR_CTLRS; i++) { 1733 if (!(ctrl_mask & (1 << i))) 1734 continue; 1735 printf("\"lowest common\" DIMM parameters: " 1736 "Controller=%u\n", i); 1737 print_lowest_common_dimm_parameters( 1738 &pinfo->common_timing_params[i]); 1739 printf("\n"); 1740 } 1741 printf("\n"); 1742 } 1743 1744 /* STEP 4: User Configuration Options */ 1745 if (do_mask & STEP_GATHER_OPTS) { 1746 for (i = 0; i < CONFIG_SYS_NUM_DDR_CTLRS; i++) { 1747 if (!(ctrl_mask & (1 << i))) 1748 continue; 1749 printf("User Config Options: Controller=%u\n", i); 1750 print_memctl_options(&pinfo->memctl_opts[i]); 1751 printf("\n"); 1752 } 1753 printf("\n"); 1754 } 1755 1756 /* STEP 5: Address assignment */ 1757 if (do_mask & STEP_ASSIGN_ADDRESSES) { 1758 for (i = 0; i < CONFIG_SYS_NUM_DDR_CTLRS; i++) { 1759 if (!(ctrl_mask & (1 << i))) 1760 continue; 1761 for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) { 1762 printf("Address Assignment: Controller=%u " 1763 "DIMM=%u\n", i, j); 1764 printf("Don't have this functionality yet\n"); 1765 } 1766 printf("\n"); 1767 } 1768 printf("\n"); 1769 } 1770 1771 /* STEP 6: computed controller register values */ 1772 if (do_mask & STEP_COMPUTE_REGS) { 1773 for (i = 0; i < CONFIG_SYS_NUM_DDR_CTLRS; i++) { 1774 if (!(ctrl_mask & (1 << i))) 1775 continue; 1776 printf("Computed Register Values: Controller=%u\n", i); 1777 print_fsl_memctl_config_regs( 1778 &pinfo->fsl_ddr_config_reg[i]); 1779 retval = check_fsl_memctl_config_regs( 1780 &pinfo->fsl_ddr_config_reg[i]); 1781 if (retval) { 1782 printf("check_fsl_memctl_config_regs " 1783 "result = %u\n", retval); 1784 } 1785 printf("\n"); 1786 } 1787 printf("\n"); 1788 } 1789 } 1790 1791 struct data_strings { 1792 const char *data_name; 1793 unsigned int step_mask; 1794 unsigned int dimm_number_required; 1795 }; 1796 1797 #define DATA_OPTIONS(name, step, dimm) {#name, step, dimm} 1798 1799 static unsigned int fsl_ddr_parse_interactive_cmd( 1800 char **argv, 1801 int argc, 1802 unsigned int *pstep_mask, 1803 unsigned int *pctlr_mask, 1804 unsigned int *pdimm_mask, 1805 unsigned int *pdimm_number_required 1806 ) { 1807 1808 static const struct data_strings options[] = { 1809 DATA_OPTIONS(spd, STEP_GET_SPD, 1), 1810 DATA_OPTIONS(dimmparms, STEP_COMPUTE_DIMM_PARMS, 1), 1811 DATA_OPTIONS(commonparms, STEP_COMPUTE_COMMON_PARMS, 0), 1812 DATA_OPTIONS(opts, STEP_GATHER_OPTS, 0), 1813 DATA_OPTIONS(addresses, STEP_ASSIGN_ADDRESSES, 0), 1814 DATA_OPTIONS(regs, STEP_COMPUTE_REGS, 0), 1815 }; 1816 static const unsigned int n_opts = ARRAY_SIZE(options); 1817 1818 unsigned int i, j; 1819 unsigned int error = 0; 1820 1821 for (i = 1; i < argc; i++) { 1822 unsigned int matched = 0; 1823 1824 for (j = 0; j < n_opts; j++) { 1825 if (strcmp(options[j].data_name, argv[i]) != 0) 1826 continue; 1827 *pstep_mask |= options[j].step_mask; 1828 *pdimm_number_required = 1829 options[j].dimm_number_required; 1830 matched = 1; 1831 break; 1832 } 1833 1834 if (matched) 1835 continue; 1836 1837 if (argv[i][0] == 'c') { 1838 char c = argv[i][1]; 1839 if (isdigit(c)) 1840 *pctlr_mask |= 1 << (c - '0'); 1841 continue; 1842 } 1843 1844 if (argv[i][0] == 'd') { 1845 char c = argv[i][1]; 1846 if (isdigit(c)) 1847 *pdimm_mask |= 1 << (c - '0'); 1848 continue; 1849 } 1850 1851 printf("unknown arg %s\n", argv[i]); 1852 *pstep_mask = 0; 1853 error = 1; 1854 break; 1855 } 1856 1857 return error; 1858 } 1859 1860 int fsl_ddr_interactive_env_var_exists(void) 1861 { 1862 char buffer[CONFIG_SYS_CBSIZE]; 1863 1864 if (env_get_f("ddr_interactive", buffer, CONFIG_SYS_CBSIZE) >= 0) 1865 return 1; 1866 1867 return 0; 1868 } 1869 1870 unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo, int var_is_set) 1871 { 1872 unsigned long long ddrsize; 1873 const char *prompt = "FSL DDR>"; 1874 char buffer[CONFIG_SYS_CBSIZE]; 1875 char buffer2[CONFIG_SYS_CBSIZE]; 1876 char *p = NULL; 1877 char *argv[CONFIG_SYS_MAXARGS + 1]; /* NULL terminated */ 1878 int argc; 1879 unsigned int next_step = STEP_GET_SPD; 1880 const char *usage = { 1881 "commands:\n" 1882 "print print SPD and intermediate computed data\n" 1883 "reset reboot machine\n" 1884 "recompute reload SPD and options to default and recompute regs\n" 1885 "edit modify spd, parameter, or option\n" 1886 "compute recompute registers from current next_step to end\n" 1887 "copy copy parameters\n" 1888 "next_step shows current next_step\n" 1889 "help this message\n" 1890 "go program the memory controller and continue with u-boot\n" 1891 }; 1892 1893 if (var_is_set) { 1894 if (env_get_f("ddr_interactive", buffer2, 1895 CONFIG_SYS_CBSIZE) > 0) 1896 p = buffer2; 1897 else 1898 var_is_set = 0; 1899 } 1900 1901 /* 1902 * The strategy for next_step is that it points to the next 1903 * step in the computation process that needs to be done. 1904 */ 1905 while (1) { 1906 if (var_is_set) { 1907 char *pend = strchr(p, ';'); 1908 if (pend) { 1909 /* found command separator, copy sub-command */ 1910 *pend = '\0'; 1911 strcpy(buffer, p); 1912 p = pend + 1; 1913 } else { 1914 /* separator not found, copy whole string */ 1915 strcpy(buffer, p); 1916 p = NULL; 1917 var_is_set = 0; 1918 } 1919 } else { 1920 /* 1921 * No need to worry for buffer overflow here in 1922 * this function; cli_readline() maxes out at 1923 * CFG_CBSIZE 1924 */ 1925 cli_readline_into_buffer(prompt, buffer, 0); 1926 } 1927 argc = cli_simple_parse_line(buffer, argv); 1928 if (argc == 0) 1929 continue; 1930 1931 1932 if (strcmp(argv[0], "help") == 0) { 1933 puts(usage); 1934 continue; 1935 } 1936 1937 if (strcmp(argv[0], "next_step") == 0) { 1938 printf("next_step = 0x%02X (%s)\n", 1939 next_step, 1940 step_to_string(next_step)); 1941 continue; 1942 } 1943 1944 if (strcmp(argv[0], "copy") == 0) { 1945 unsigned int error = 0; 1946 unsigned int step_mask = 0; 1947 unsigned int src_ctlr_mask = 0; 1948 unsigned int src_dimm_mask = 0; 1949 unsigned int dimm_number_required = 0; 1950 unsigned int src_ctlr_num = 0; 1951 unsigned int src_dimm_num = 0; 1952 unsigned int dst_ctlr_num = -1; 1953 unsigned int dst_dimm_num = -1; 1954 unsigned int i, num_dest_parms; 1955 1956 if (argc == 1) { 1957 printf("copy <src c#> <src d#> <spd|dimmparms|commonparms|opts|addresses|regs> <dst c#> <dst d#>\n"); 1958 continue; 1959 } 1960 1961 error = fsl_ddr_parse_interactive_cmd( 1962 argv, argc, 1963 &step_mask, 1964 &src_ctlr_mask, 1965 &src_dimm_mask, 1966 &dimm_number_required 1967 ); 1968 1969 /* XXX: only dimm_number_required and step_mask will 1970 be used by this function. Parse the controller and 1971 DIMM number separately because it is easier. */ 1972 1973 if (error) 1974 continue; 1975 1976 /* parse source destination controller / DIMM */ 1977 1978 num_dest_parms = dimm_number_required ? 2 : 1; 1979 1980 for (i = 0; i < argc; i++) { 1981 if (argv[i][0] == 'c') { 1982 char c = argv[i][1]; 1983 if (isdigit(c)) { 1984 src_ctlr_num = (c - '0'); 1985 break; 1986 } 1987 } 1988 } 1989 1990 for (i = 0; i < argc; i++) { 1991 if (argv[i][0] == 'd') { 1992 char c = argv[i][1]; 1993 if (isdigit(c)) { 1994 src_dimm_num = (c - '0'); 1995 break; 1996 } 1997 } 1998 } 1999 2000 /* parse destination controller / DIMM */ 2001 2002 for (i = argc - 1; i >= argc - num_dest_parms; i--) { 2003 if (argv[i][0] == 'c') { 2004 char c = argv[i][1]; 2005 if (isdigit(c)) { 2006 dst_ctlr_num = (c - '0'); 2007 break; 2008 } 2009 } 2010 } 2011 2012 for (i = argc - 1; i >= argc - num_dest_parms; i--) { 2013 if (argv[i][0] == 'd') { 2014 char c = argv[i][1]; 2015 if (isdigit(c)) { 2016 dst_dimm_num = (c - '0'); 2017 break; 2018 } 2019 } 2020 } 2021 2022 /* TODO: validate inputs */ 2023 2024 debug("src_ctlr_num = %u, src_dimm_num = %u, dst_ctlr_num = %u, dst_dimm_num = %u, step_mask = %x\n", 2025 src_ctlr_num, src_dimm_num, dst_ctlr_num, dst_dimm_num, step_mask); 2026 2027 2028 switch (step_mask) { 2029 2030 case STEP_GET_SPD: 2031 memcpy(&(pinfo->spd_installed_dimms[dst_ctlr_num][dst_dimm_num]), 2032 &(pinfo->spd_installed_dimms[src_ctlr_num][src_dimm_num]), 2033 sizeof(pinfo->spd_installed_dimms[0][0])); 2034 break; 2035 2036 case STEP_COMPUTE_DIMM_PARMS: 2037 memcpy(&(pinfo->dimm_params[dst_ctlr_num][dst_dimm_num]), 2038 &(pinfo->dimm_params[src_ctlr_num][src_dimm_num]), 2039 sizeof(pinfo->dimm_params[0][0])); 2040 break; 2041 2042 case STEP_COMPUTE_COMMON_PARMS: 2043 memcpy(&(pinfo->common_timing_params[dst_ctlr_num]), 2044 &(pinfo->common_timing_params[src_ctlr_num]), 2045 sizeof(pinfo->common_timing_params[0])); 2046 break; 2047 2048 case STEP_GATHER_OPTS: 2049 memcpy(&(pinfo->memctl_opts[dst_ctlr_num]), 2050 &(pinfo->memctl_opts[src_ctlr_num]), 2051 sizeof(pinfo->memctl_opts[0])); 2052 break; 2053 2054 /* someday be able to have addresses to copy addresses... */ 2055 2056 case STEP_COMPUTE_REGS: 2057 memcpy(&(pinfo->fsl_ddr_config_reg[dst_ctlr_num]), 2058 &(pinfo->fsl_ddr_config_reg[src_ctlr_num]), 2059 sizeof(pinfo->memctl_opts[0])); 2060 break; 2061 2062 default: 2063 printf("unexpected step_mask value\n"); 2064 } 2065 2066 continue; 2067 2068 } 2069 2070 if (strcmp(argv[0], "edit") == 0) { 2071 unsigned int error = 0; 2072 unsigned int step_mask = 0; 2073 unsigned int ctlr_mask = 0; 2074 unsigned int dimm_mask = 0; 2075 char *p_element = NULL; 2076 char *p_value = NULL; 2077 unsigned int dimm_number_required = 0; 2078 unsigned int ctrl_num; 2079 unsigned int dimm_num; 2080 2081 if (argc == 1) { 2082 /* Only the element and value must be last */ 2083 printf("edit <c#> <d#> " 2084 "<spd|dimmparms|commonparms|opts|" 2085 "addresses|regs> <element> <value>\n"); 2086 printf("for spd, specify byte number for " 2087 "element\n"); 2088 continue; 2089 } 2090 2091 error = fsl_ddr_parse_interactive_cmd( 2092 argv, argc - 2, 2093 &step_mask, 2094 &ctlr_mask, 2095 &dimm_mask, 2096 &dimm_number_required 2097 ); 2098 2099 if (error) 2100 continue; 2101 2102 2103 /* Check arguments */ 2104 2105 /* ERROR: If no steps were found */ 2106 if (step_mask == 0) { 2107 printf("Error: No valid steps were specified " 2108 "in argument.\n"); 2109 continue; 2110 } 2111 2112 /* ERROR: If multiple steps were found */ 2113 if (step_mask & (step_mask - 1)) { 2114 printf("Error: Multiple steps specified in " 2115 "argument.\n"); 2116 continue; 2117 } 2118 2119 /* ERROR: Controller not specified */ 2120 if (ctlr_mask == 0) { 2121 printf("Error: controller number not " 2122 "specified or no element and " 2123 "value specified\n"); 2124 continue; 2125 } 2126 2127 if (ctlr_mask & (ctlr_mask - 1)) { 2128 printf("Error: multiple controllers " 2129 "specified, %X\n", ctlr_mask); 2130 continue; 2131 } 2132 2133 /* ERROR: DIMM number not specified */ 2134 if (dimm_number_required && dimm_mask == 0) { 2135 printf("Error: DIMM number number not " 2136 "specified or no element and " 2137 "value specified\n"); 2138 continue; 2139 } 2140 2141 if (dimm_mask & (dimm_mask - 1)) { 2142 printf("Error: multipled DIMMs specified\n"); 2143 continue; 2144 } 2145 2146 p_element = argv[argc - 2]; 2147 p_value = argv[argc - 1]; 2148 2149 ctrl_num = __ilog2(ctlr_mask); 2150 dimm_num = __ilog2(dimm_mask); 2151 2152 switch (step_mask) { 2153 case STEP_GET_SPD: 2154 { 2155 unsigned int element_num; 2156 unsigned int value; 2157 2158 element_num = simple_strtoul(p_element, 2159 NULL, 0); 2160 value = simple_strtoul(p_value, 2161 NULL, 0); 2162 fsl_ddr_spd_edit(pinfo, 2163 ctrl_num, 2164 dimm_num, 2165 element_num, 2166 value); 2167 next_step = STEP_COMPUTE_DIMM_PARMS; 2168 } 2169 break; 2170 2171 case STEP_COMPUTE_DIMM_PARMS: 2172 fsl_ddr_dimm_parameters_edit( 2173 pinfo, ctrl_num, dimm_num, 2174 p_element, p_value); 2175 next_step = STEP_COMPUTE_COMMON_PARMS; 2176 break; 2177 2178 case STEP_COMPUTE_COMMON_PARMS: 2179 lowest_common_dimm_parameters_edit(pinfo, 2180 ctrl_num, p_element, p_value); 2181 next_step = STEP_GATHER_OPTS; 2182 break; 2183 2184 case STEP_GATHER_OPTS: 2185 fsl_ddr_options_edit(pinfo, ctrl_num, 2186 p_element, p_value); 2187 next_step = STEP_ASSIGN_ADDRESSES; 2188 break; 2189 2190 case STEP_ASSIGN_ADDRESSES: 2191 printf("editing of address assignment " 2192 "not yet implemented\n"); 2193 break; 2194 2195 case STEP_COMPUTE_REGS: 2196 { 2197 fsl_ddr_regs_edit(pinfo, 2198 ctrl_num, 2199 p_element, 2200 p_value); 2201 next_step = STEP_PROGRAM_REGS; 2202 } 2203 break; 2204 2205 default: 2206 printf("programming error\n"); 2207 while (1) 2208 ; 2209 break; 2210 } 2211 continue; 2212 } 2213 2214 if (strcmp(argv[0], "reset") == 0) { 2215 /* 2216 * Reboot machine. 2217 * Args don't seem to matter because this 2218 * doesn't return 2219 */ 2220 do_reset(NULL, 0, 0, NULL); 2221 printf("Reset didn't work\n"); 2222 } 2223 2224 if (strcmp(argv[0], "recompute") == 0) { 2225 /* 2226 * Recalculate everything, starting with 2227 * loading SPD EEPROM from DIMMs 2228 */ 2229 next_step = STEP_GET_SPD; 2230 ddrsize = fsl_ddr_compute(pinfo, next_step, 0); 2231 continue; 2232 } 2233 2234 if (strcmp(argv[0], "compute") == 0) { 2235 /* 2236 * Compute rest of steps starting at 2237 * the current next_step/ 2238 */ 2239 ddrsize = fsl_ddr_compute(pinfo, next_step, 0); 2240 continue; 2241 } 2242 2243 if (strcmp(argv[0], "print") == 0) { 2244 unsigned int error = 0; 2245 unsigned int step_mask = 0; 2246 unsigned int ctlr_mask = 0; 2247 unsigned int dimm_mask = 0; 2248 unsigned int dimm_number_required = 0; 2249 2250 if (argc == 1) { 2251 printf("print [c<n>] [d<n>] [spd] [dimmparms] " 2252 "[commonparms] [opts] [addresses] [regs]\n"); 2253 continue; 2254 } 2255 2256 error = fsl_ddr_parse_interactive_cmd( 2257 argv, argc, 2258 &step_mask, 2259 &ctlr_mask, 2260 &dimm_mask, 2261 &dimm_number_required 2262 ); 2263 2264 if (error) 2265 continue; 2266 2267 /* If no particular controller was found, print all */ 2268 if (ctlr_mask == 0) 2269 ctlr_mask = 0xFF; 2270 2271 /* If no particular dimm was found, print all dimms. */ 2272 if (dimm_mask == 0) 2273 dimm_mask = 0xFF; 2274 2275 /* If no steps were found, print all steps. */ 2276 if (step_mask == 0) 2277 step_mask = STEP_ALL; 2278 2279 fsl_ddr_printinfo(pinfo, ctlr_mask, 2280 dimm_mask, step_mask); 2281 continue; 2282 } 2283 2284 if (strcmp(argv[0], "go") == 0) { 2285 if (next_step) 2286 ddrsize = fsl_ddr_compute(pinfo, next_step, 0); 2287 break; 2288 } 2289 2290 printf("unknown command %s\n", argv[0]); 2291 } 2292 2293 debug("end of memory = %llu\n", (u64)ddrsize); 2294 2295 return ddrsize; 2296 } 2297