1 /* 2 * Copyright 2008-2012 Freescale Semiconductor, Inc. 3 * Dave Liu <daveliu@freescale.com> 4 * 5 * calculate the organization and timing parameter 6 * from ddr3 spd, please refer to the spec 7 * JEDEC standard No.21-C 4_01_02_11R18.pdf 8 * 9 * SPDX-License-Identifier: GPL-2.0 10 */ 11 12 #include <common.h> 13 #include <fsl_ddr_sdram.h> 14 15 #include <fsl_ddr.h> 16 17 /* 18 * Calculate the Density of each Physical Rank. 19 * Returned size is in bytes. 20 * 21 * each rank size = 22 * sdram capacity(bit) / 8 * primary bus width / sdram width 23 * 24 * where: sdram capacity = spd byte4[3:0] 25 * primary bus width = spd byte8[2:0] 26 * sdram width = spd byte7[2:0] 27 * 28 * SPD byte4 - sdram density and banks 29 * bit[3:0] size(bit) size(byte) 30 * 0000 256Mb 32MB 31 * 0001 512Mb 64MB 32 * 0010 1Gb 128MB 33 * 0011 2Gb 256MB 34 * 0100 4Gb 512MB 35 * 0101 8Gb 1GB 36 * 0110 16Gb 2GB 37 * 38 * SPD byte8 - module memory bus width 39 * bit[2:0] primary bus width 40 * 000 8bits 41 * 001 16bits 42 * 010 32bits 43 * 011 64bits 44 * 45 * SPD byte7 - module organiztion 46 * bit[2:0] sdram device width 47 * 000 4bits 48 * 001 8bits 49 * 010 16bits 50 * 011 32bits 51 * 52 */ 53 static unsigned long long 54 compute_ranksize(const ddr3_spd_eeprom_t *spd) 55 { 56 unsigned long long bsize; 57 58 int nbit_sdram_cap_bsize = 0; 59 int nbit_primary_bus_width = 0; 60 int nbit_sdram_width = 0; 61 62 if ((spd->density_banks & 0xf) < 7) 63 nbit_sdram_cap_bsize = (spd->density_banks & 0xf) + 28; 64 if ((spd->bus_width & 0x7) < 4) 65 nbit_primary_bus_width = (spd->bus_width & 0x7) + 3; 66 if ((spd->organization & 0x7) < 4) 67 nbit_sdram_width = (spd->organization & 0x7) + 2; 68 69 bsize = 1ULL << (nbit_sdram_cap_bsize - 3 70 + nbit_primary_bus_width - nbit_sdram_width); 71 72 debug("DDR: DDR III rank density = 0x%16llx\n", bsize); 73 74 return bsize; 75 } 76 77 /* 78 * ddr_compute_dimm_parameters for DDR3 SPD 79 * 80 * Compute DIMM parameters based upon the SPD information in spd. 81 * Writes the results to the dimm_params_t structure pointed by pdimm. 82 * 83 */ 84 unsigned int ddr_compute_dimm_parameters(const unsigned int ctrl_num, 85 const ddr3_spd_eeprom_t *spd, 86 dimm_params_t *pdimm, 87 unsigned int dimm_number) 88 { 89 unsigned int retval; 90 unsigned int mtb_ps; 91 int ftb_10th_ps; 92 int i; 93 94 if (spd->mem_type) { 95 if (spd->mem_type != SPD_MEMTYPE_DDR3) { 96 printf("DIMM %u: is not a DDR3 SPD.\n", dimm_number); 97 return 1; 98 } 99 } else { 100 memset(pdimm, 0, sizeof(dimm_params_t)); 101 return 1; 102 } 103 104 retval = ddr3_spd_check(spd); 105 if (retval) { 106 printf("DIMM %u: failed checksum\n", dimm_number); 107 return 2; 108 } 109 110 /* 111 * The part name in ASCII in the SPD EEPROM is not null terminated. 112 * Guarantee null termination here by presetting all bytes to 0 113 * and copying the part name in ASCII from the SPD onto it 114 */ 115 memset(pdimm->mpart, 0, sizeof(pdimm->mpart)); 116 if ((spd->info_size_crc & 0xF) > 1) 117 memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1); 118 119 /* DIMM organization parameters */ 120 pdimm->n_ranks = ((spd->organization >> 3) & 0x7) + 1; 121 pdimm->rank_density = compute_ranksize(spd); 122 pdimm->capacity = pdimm->n_ranks * pdimm->rank_density; 123 pdimm->primary_sdram_width = 1 << (3 + (spd->bus_width & 0x7)); 124 if ((spd->bus_width >> 3) & 0x3) 125 pdimm->ec_sdram_width = 8; 126 else 127 pdimm->ec_sdram_width = 0; 128 pdimm->data_width = pdimm->primary_sdram_width 129 + pdimm->ec_sdram_width; 130 pdimm->device_width = 1 << ((spd->organization & 0x7) + 2); 131 132 /* These are the types defined by the JEDEC DDR3 SPD spec */ 133 pdimm->mirrored_dimm = 0; 134 pdimm->registered_dimm = 0; 135 switch (spd->module_type & DDR3_SPD_MODULETYPE_MASK) { 136 case DDR3_SPD_MODULETYPE_RDIMM: 137 case DDR3_SPD_MODULETYPE_MINI_RDIMM: 138 case DDR3_SPD_MODULETYPE_72B_SO_RDIMM: 139 /* Registered/buffered DIMMs */ 140 pdimm->registered_dimm = 1; 141 for (i = 0; i < 16; i += 2) { 142 u8 rcw = spd->mod_section.registered.rcw[i/2]; 143 pdimm->rcw[i] = (rcw >> 0) & 0x0F; 144 pdimm->rcw[i+1] = (rcw >> 4) & 0x0F; 145 } 146 break; 147 148 case DDR3_SPD_MODULETYPE_UDIMM: 149 case DDR3_SPD_MODULETYPE_SO_DIMM: 150 case DDR3_SPD_MODULETYPE_MICRO_DIMM: 151 case DDR3_SPD_MODULETYPE_MINI_UDIMM: 152 case DDR3_SPD_MODULETYPE_MINI_CDIMM: 153 case DDR3_SPD_MODULETYPE_72B_SO_UDIMM: 154 case DDR3_SPD_MODULETYPE_72B_SO_CDIMM: 155 case DDR3_SPD_MODULETYPE_LRDIMM: 156 case DDR3_SPD_MODULETYPE_16B_SO_DIMM: 157 case DDR3_SPD_MODULETYPE_32B_SO_DIMM: 158 /* Unbuffered DIMMs */ 159 if (spd->mod_section.unbuffered.addr_mapping & 0x1) 160 pdimm->mirrored_dimm = 1; 161 break; 162 163 default: 164 printf("unknown module_type 0x%02X\n", spd->module_type); 165 return 1; 166 } 167 168 /* SDRAM device parameters */ 169 pdimm->n_row_addr = ((spd->addressing >> 3) & 0x7) + 12; 170 pdimm->n_col_addr = (spd->addressing & 0x7) + 9; 171 pdimm->n_banks_per_sdram_device = 8 << ((spd->density_banks >> 4) & 0x7); 172 173 /* 174 * The SPD spec has not the ECC bit, 175 * We consider the DIMM as ECC capability 176 * when the extension bus exist 177 */ 178 if (pdimm->ec_sdram_width) 179 pdimm->edc_config = 0x02; 180 else 181 pdimm->edc_config = 0x00; 182 183 /* 184 * The SPD spec has not the burst length byte 185 * but DDR3 spec has nature BL8 and BC4, 186 * BL8 -bit3, BC4 -bit2 187 */ 188 pdimm->burst_lengths_bitmask = 0x0c; 189 pdimm->row_density = __ilog2(pdimm->rank_density); 190 191 /* MTB - medium timebase 192 * The unit in the SPD spec is ns, 193 * We convert it to ps. 194 * eg: MTB = 0.125ns (125ps) 195 */ 196 mtb_ps = (spd->mtb_dividend * 1000) /spd->mtb_divisor; 197 pdimm->mtb_ps = mtb_ps; 198 199 /* 200 * FTB - fine timebase 201 * use 1/10th of ps as our unit to avoid floating point 202 * eg, 10 for 1ps, 25 for 2.5ps, 50 for 5ps 203 */ 204 ftb_10th_ps = 205 ((spd->ftb_div & 0xf0) >> 4) * 10 / (spd->ftb_div & 0x0f); 206 pdimm->ftb_10th_ps = ftb_10th_ps; 207 /* 208 * sdram minimum cycle time 209 * we assume the MTB is 0.125ns 210 * eg: 211 * tck_min=15 MTB (1.875ns) ->DDR3-1066 212 * =12 MTB (1.5ns) ->DDR3-1333 213 * =10 MTB (1.25ns) ->DDR3-1600 214 */ 215 pdimm->tckmin_x_ps = spd->tck_min * mtb_ps + 216 (spd->fine_tck_min * ftb_10th_ps) / 10; 217 218 /* 219 * CAS latency supported 220 * bit4 - CL4 221 * bit5 - CL5 222 * bit18 - CL18 223 */ 224 pdimm->caslat_x = ((spd->caslat_msb << 8) | spd->caslat_lsb) << 4; 225 226 /* 227 * min CAS latency time 228 * eg: taa_min = 229 * DDR3-800D 100 MTB (12.5ns) 230 * DDR3-1066F 105 MTB (13.125ns) 231 * DDR3-1333H 108 MTB (13.5ns) 232 * DDR3-1600H 90 MTB (11.25ns) 233 */ 234 pdimm->taa_ps = spd->taa_min * mtb_ps + 235 (spd->fine_taa_min * ftb_10th_ps) / 10; 236 237 /* 238 * min write recovery time 239 * eg: 240 * twr_min = 120 MTB (15ns) -> all speed grades. 241 */ 242 pdimm->twr_ps = spd->twr_min * mtb_ps; 243 244 /* 245 * min RAS to CAS delay time 246 * eg: trcd_min = 247 * DDR3-800 100 MTB (12.5ns) 248 * DDR3-1066F 105 MTB (13.125ns) 249 * DDR3-1333H 108 MTB (13.5ns) 250 * DDR3-1600H 90 MTB (11.25) 251 */ 252 pdimm->trcd_ps = spd->trcd_min * mtb_ps + 253 (spd->fine_trcd_min * ftb_10th_ps) / 10; 254 255 /* 256 * min row active to row active delay time 257 * eg: trrd_min = 258 * DDR3-800(1KB page) 80 MTB (10ns) 259 * DDR3-1333(1KB page) 48 MTB (6ns) 260 */ 261 pdimm->trrd_ps = spd->trrd_min * mtb_ps; 262 263 /* 264 * min row precharge delay time 265 * eg: trp_min = 266 * DDR3-800D 100 MTB (12.5ns) 267 * DDR3-1066F 105 MTB (13.125ns) 268 * DDR3-1333H 108 MTB (13.5ns) 269 * DDR3-1600H 90 MTB (11.25ns) 270 */ 271 pdimm->trp_ps = spd->trp_min * mtb_ps + 272 (spd->fine_trp_min * ftb_10th_ps) / 10; 273 274 /* min active to precharge delay time 275 * eg: tRAS_min = 276 * DDR3-800D 300 MTB (37.5ns) 277 * DDR3-1066F 300 MTB (37.5ns) 278 * DDR3-1333H 288 MTB (36ns) 279 * DDR3-1600H 280 MTB (35ns) 280 */ 281 pdimm->tras_ps = (((spd->tras_trc_ext & 0xf) << 8) | spd->tras_min_lsb) 282 * mtb_ps; 283 /* 284 * min active to actice/refresh delay time 285 * eg: tRC_min = 286 * DDR3-800D 400 MTB (50ns) 287 * DDR3-1066F 405 MTB (50.625ns) 288 * DDR3-1333H 396 MTB (49.5ns) 289 * DDR3-1600H 370 MTB (46.25ns) 290 */ 291 pdimm->trc_ps = (((spd->tras_trc_ext & 0xf0) << 4) | spd->trc_min_lsb) 292 * mtb_ps + (spd->fine_trc_min * ftb_10th_ps) / 10; 293 /* 294 * min refresh recovery delay time 295 * eg: tRFC_min = 296 * 512Mb 720 MTB (90ns) 297 * 1Gb 880 MTB (110ns) 298 * 2Gb 1280 MTB (160ns) 299 */ 300 pdimm->trfc_ps = ((spd->trfc_min_msb << 8) | spd->trfc_min_lsb) 301 * mtb_ps; 302 /* 303 * min internal write to read command delay time 304 * eg: twtr_min = 40 MTB (7.5ns) - all speed bins. 305 * tWRT is at least 4 mclk independent of operating freq. 306 */ 307 pdimm->twtr_ps = spd->twtr_min * mtb_ps; 308 309 /* 310 * min internal read to precharge command delay time 311 * eg: trtp_min = 40 MTB (7.5ns) - all speed bins. 312 * tRTP is at least 4 mclk independent of operating freq. 313 */ 314 pdimm->trtp_ps = spd->trtp_min * mtb_ps; 315 316 /* 317 * Average periodic refresh interval 318 * tREFI = 7.8 us at normal temperature range 319 * = 3.9 us at ext temperature range 320 */ 321 pdimm->refresh_rate_ps = 7800000; 322 if ((spd->therm_ref_opt & 0x1) && !(spd->therm_ref_opt & 0x2)) { 323 pdimm->refresh_rate_ps = 3900000; 324 pdimm->extended_op_srt = 1; 325 } 326 327 /* 328 * min four active window delay time 329 * eg: tfaw_min = 330 * DDR3-800(1KB page) 320 MTB (40ns) 331 * DDR3-1066(1KB page) 300 MTB (37.5ns) 332 * DDR3-1333(1KB page) 240 MTB (30ns) 333 * DDR3-1600(1KB page) 240 MTB (30ns) 334 */ 335 pdimm->tfaw_ps = (((spd->tfaw_msb & 0xf) << 8) | spd->tfaw_min) 336 * mtb_ps; 337 338 return 0; 339 } 340