xref: /openbmc/u-boot/drivers/crypto/fsl/jr.h (revision 2d1951fe)
1 /*
2  * Copyright 2008-2014 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  *
6  */
7 
8 #ifndef __JR_H
9 #define __JR_H
10 
11 #include <linux/compiler.h>
12 
13 #define JR_SIZE 4
14 /* Timeout currently defined as 90 sec */
15 #define CONFIG_SEC_DEQ_TIMEOUT	90000000U
16 
17 #define DEFAULT_JR_ID		0
18 #define DEFAULT_JR_LIODN	0
19 #define DEFAULT_IRQ		0	/* Interrupts not to be configured */
20 
21 #define MCFGR_SWRST       ((uint32_t)(1)<<31) /* Software Reset */
22 #define MCFGR_DMA_RST     ((uint32_t)(1)<<28) /* DMA Reset */
23 #define MCFGR_PS_SHIFT          16
24 #define MCFGR_AWCACHE_SHIFT	8
25 #define MCFGR_AWCACHE_MASK	(0xf << MCFGR_AWCACHE_SHIFT)
26 #define MCFGR_ARCACHE_SHIFT	12
27 #define MCFGR_ARCACHE_MASK	(0xf << MCFGR_ARCACHE_SHIFT)
28 
29 #define JR_INTMASK	  0x00000001
30 #define JRCR_RESET                  0x01
31 #define JRINT_ERR_HALT_INPROGRESS   0x4
32 #define JRINT_ERR_HALT_MASK         0xc
33 #define JRNSLIODN_SHIFT		16
34 #define JRNSLIODN_MASK		0x0fff0000
35 #define JRSLIODN_SHIFT		0
36 #define JRSLIODN_MASK		0x00000fff
37 
38 #define JQ_DEQ_ERR		-1
39 #define JQ_DEQ_TO_ERR		-2
40 #define JQ_ENQ_ERR		-3
41 
42 struct op_ring {
43 	phys_addr_t desc;
44 	uint32_t status;
45 } __packed;
46 
47 struct jr_info {
48 	void (*callback)(uint32_t status, void *arg);
49 	phys_addr_t desc_phys_addr;
50 	uint32_t desc_len;
51 	uint32_t op_done;
52 	void *arg;
53 };
54 
55 struct jobring {
56 	int jq_id;
57 	int irq;
58 	int liodn;
59 	/* Head is the index where software would enq the descriptor in
60 	 * the i/p ring
61 	 */
62 	int head;
63 	/* Tail index would be used by s/w ehile enqueuing to determine if
64 	 * there is any space left in the s/w maintained i/p rings
65 	 */
66 	/* Also in case of deq tail will be incremented only in case of
67 	 * in-order job completion
68 	 */
69 	int tail;
70 	/* Read index of the output ring. It may not match with tail in case
71 	 * of out of order completetion
72 	 */
73 	int read_idx;
74 	/* Write index to input ring. Would be always equal to head */
75 	int write_idx;
76 	/* Size of the rings. */
77 	int size;
78 	/* Op ring size aligned to cache line size */
79 	int op_size;
80 	/* The ip and output rings have to be accessed by SEC. So the
81 	 * pointers will ahve to point to the housekeeping region provided
82 	 * by SEC
83 	 */
84 	/*Circular  Ring of i/p descriptors */
85 	dma_addr_t *input_ring;
86 	/* Circular Ring of o/p descriptors */
87 	/* Circula Ring containing info regarding descriptors in i/p
88 	 * and o/p ring
89 	 */
90 	/* This ring can be on the stack */
91 	struct jr_info info[JR_SIZE];
92 	struct op_ring *output_ring;
93 	/* Offset in CCSR to the SEC engine to which this JR belongs */
94 	uint32_t sec_offset;
95 
96 };
97 
98 struct result {
99 	int done;
100 	uint32_t status;
101 };
102 
103 void caam_jr_strstatus(u32 status);
104 int run_descriptor_jr(uint32_t *desc);
105 
106 #endif
107