xref: /openbmc/u-boot/drivers/crypto/fsl/error.c (revision 3ba98ed8)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * CAAM Error Reporting
4  *
5  * Copyright 2009-2014 Freescale Semiconductor, Inc.
6  *
7  * Derived from error.c file in linux drivers/crypto/caam
8  */
9 
10 #include <common.h>
11 #include <malloc.h>
12 #include "desc.h"
13 #include "jr.h"
14 
15 #define CAAM_ERROR_STR_MAX 302
16 
17 #define JRSTA_SSRC_SHIFT            28
18 #define JRSTA_CCBERR_CHAID_MASK     0x00f0
19 #define JRSTA_CCBERR_CHAID_SHIFT    4
20 #define JRSTA_CCBERR_ERRID_MASK     0x000
21 #define JRSTA_CCBERR_CHAID_RNG      (0x05 << JRSTA_CCBERR_CHAID_SHIFT)
22 
23 #define JRSTA_DECOERR_JUMP          0x08000000
24 #define JRSTA_DECOERR_INDEX_SHIFT   8
25 #define JRSTA_DECOERR_INDEX_MASK    0xff00
26 #define JRSTA_DECOERR_ERROR_MASK    0x00ff
27 
28 
29 static const struct {
30 	u8 value;
31 	const char *error_text;
32 } desc_error_list[] = {
33 	{ 0x00, "No error." },
34 	{ 0x01, "SGT Length Error. The descriptor is trying to read" \
35 		" more data than is contained in the SGT table." },
36 	{ 0x02, "SGT Null Entry Error." },
37 	{ 0x03, "Job Ring Control Error. Bad value in Job Ring Control reg." },
38 	{ 0x04, "Invalid Descriptor Command." },
39 	{ 0x05, "Reserved." },
40 	{ 0x06, "Invalid KEY Command" },
41 	{ 0x07, "Invalid LOAD Command" },
42 	{ 0x08, "Invalid STORE Command" },
43 	{ 0x09, "Invalid OPERATION Command" },
44 	{ 0x0A, "Invalid FIFO LOAD Command" },
45 	{ 0x0B, "Invalid FIFO STORE Command" },
46 	{ 0x0C, "Invalid MOVE/MOVE_LEN Command" },
47 	{ 0x0D, "Invalid JUMP Command" },
48 	{ 0x0E, "Invalid MATH Command" },
49 	{ 0x0F, "Invalid SIGNATURE Command" },
50 	{ 0x10, "Invalid Sequence Command" },
51 	{ 0x11, "Skip data type invalid. The type must be 0xE or 0xF."},
52 	{ 0x12, "Shared Descriptor Header Error" },
53 	{ 0x13, "Header Error. Invalid length or parity, or other problems." },
54 	{ 0x14, "Burster Error. Burster has gotten to an illegal state" },
55 	{ 0x15, "Context Register Length Error" },
56 	{ 0x16, "DMA Error" },
57 	{ 0x17, "Reserved." },
58 	{ 0x1A, "Job failed due to JR reset" },
59 	{ 0x1B, "Job failed due to Fail Mode" },
60 	{ 0x1C, "DECO Watchdog timer timeout error" },
61 	{ 0x1D, "DECO tried to copy a key from another DECO but" \
62 		" the other DECO's Key Registers were locked" },
63 	{ 0x1E, "DECO attempted to copy data from a DECO" \
64 		"that had an unmasked Descriptor error" },
65 	{ 0x1F, "LIODN error" },
66 	{ 0x20, "DECO has completed a reset initiated via the DRR register" },
67 	{ 0x21, "Nonce error" },
68 	{ 0x22, "Meta data is too large (> 511 bytes) for TLS decap" },
69 	{ 0x23, "Read Input Frame error" },
70 	{ 0x24, "JDKEK, TDKEK or TDSK not loaded error" },
71 	{ 0x80, "DNR (do not run) error" },
72 	{ 0x81, "undefined protocol command" },
73 	{ 0x82, "invalid setting in PDB" },
74 	{ 0x83, "Anti-replay LATE error" },
75 	{ 0x84, "Anti-replay REPLAY error" },
76 	{ 0x85, "Sequence number overflow" },
77 	{ 0x86, "Sigver invalid signature" },
78 	{ 0x87, "DSA Sign Illegal test descriptor" },
79 	{ 0x88, "Protocol Format Error" },
80 	{ 0x89, "Protocol Size Error" },
81 	{ 0xC1, "Blob Command error: Undefined mode" },
82 	{ 0xC2, "Blob Command error: Secure Memory Blob mode error" },
83 	{ 0xC4, "Blob Command error: Black Blob key or input size error" },
84 	{ 0xC5, "Blob Command error: Invalid key destination" },
85 	{ 0xC8, "Blob Command error: Trusted/Secure mode error" },
86 	{ 0xF0, "IPsec TTL or hop limit field is 0, or was decremented to 0" },
87 	{ 0xF1, "3GPP HFN matches or exceeds the Threshold" },
88 };
89 
90 static const char * const cha_id_list[] = {
91 	"",
92 	"AES",
93 	"DES",
94 	"ARC4",
95 	"MDHA",
96 	"RNG",
97 	"SNOW f8",
98 	"Kasumi f8/9",
99 	"PKHA",
100 	"CRCA",
101 	"SNOW f9",
102 	"ZUCE",
103 	"ZUCA",
104 };
105 
106 static const char * const err_id_list[] = {
107 	"No error.",
108 	"Mode error.",
109 	"Data size error.",
110 	"Key size error.",
111 	"PKHA A memory size error.",
112 	"PKHA B memory size error.",
113 	"Data arrived out of sequence error.",
114 	"PKHA divide-by-zero error.",
115 	"PKHA modulus even error.",
116 	"DES key parity error.",
117 	"ICV check failed.",
118 	"Hardware error.",
119 	"Unsupported CCM AAD size.",
120 	"Class 1 CHA is not reset",
121 	"Invalid CHA combination was selected",
122 	"Invalid CHA selected.",
123 };
124 
125 static const char * const rng_err_id_list[] = {
126 	"",
127 	"",
128 	"",
129 	"Instantiate",
130 	"Not instantiated",
131 	"Test instantiate",
132 	"Prediction resistance",
133 	"Prediction resistance and test request",
134 	"Uninstantiate",
135 	"Secure key generation",
136 };
137 
138 static void report_ccb_status(const u32 status,
139 			      const char *error)
140 {
141 	u8 cha_id = (status & JRSTA_CCBERR_CHAID_MASK) >>
142 		    JRSTA_CCBERR_CHAID_SHIFT;
143 	u8 err_id = status & JRSTA_CCBERR_ERRID_MASK;
144 	u8 idx = (status & JRSTA_DECOERR_INDEX_MASK) >>
145 		  JRSTA_DECOERR_INDEX_SHIFT;
146 	char *idx_str;
147 	const char *cha_str = "unidentified cha_id value 0x";
148 	char cha_err_code[3] = { 0 };
149 	const char *err_str = "unidentified err_id value 0x";
150 	char err_err_code[3] = { 0 };
151 
152 	if (status & JRSTA_DECOERR_JUMP)
153 		idx_str = "jump tgt desc idx";
154 	else
155 		idx_str = "desc idx";
156 
157 	if (cha_id < ARRAY_SIZE(cha_id_list))
158 		cha_str = cha_id_list[cha_id];
159 	else
160 		snprintf(cha_err_code, sizeof(cha_err_code), "%02x", cha_id);
161 
162 	if ((cha_id << JRSTA_CCBERR_CHAID_SHIFT) == JRSTA_CCBERR_CHAID_RNG &&
163 	    err_id < ARRAY_SIZE(rng_err_id_list) &&
164 	    strlen(rng_err_id_list[err_id])) {
165 		/* RNG-only error */
166 		err_str = rng_err_id_list[err_id];
167 	} else if (err_id < ARRAY_SIZE(err_id_list)) {
168 		err_str = err_id_list[err_id];
169 	} else {
170 		snprintf(err_err_code, sizeof(err_err_code), "%02x", err_id);
171 	}
172 
173 	debug("%08x: %s: %s %d: %s%s: %s%s\n",
174 	       status, error, idx_str, idx,
175 		cha_str, cha_err_code,
176 		err_str, err_err_code);
177 }
178 
179 static void report_jump_status(const u32 status,
180 			       const char *error)
181 {
182 	debug("%08x: %s: %s() not implemented\n",
183 	       status, error, __func__);
184 }
185 
186 static void report_deco_status(const u32 status,
187 			       const char *error)
188 {
189 	u8 err_id = status & JRSTA_DECOERR_ERROR_MASK;
190 	u8 idx = (status & JRSTA_DECOERR_INDEX_MASK) >>
191 		  JRSTA_DECOERR_INDEX_SHIFT;
192 	char *idx_str;
193 	const char *err_str = "unidentified error value 0x";
194 	char err_err_code[3] = { 0 };
195 	int i;
196 
197 	if (status & JRSTA_DECOERR_JUMP)
198 		idx_str = "jump tgt desc idx";
199 	else
200 		idx_str = "desc idx";
201 
202 	for (i = 0; i < ARRAY_SIZE(desc_error_list); i++)
203 		if (desc_error_list[i].value == err_id)
204 			break;
205 
206 	if (i != ARRAY_SIZE(desc_error_list) && desc_error_list[i].error_text)
207 		err_str = desc_error_list[i].error_text;
208 	else
209 		snprintf(err_err_code, sizeof(err_err_code), "%02x", err_id);
210 
211 	debug("%08x: %s: %s %d: %s%s\n",
212 	       status, error, idx_str, idx, err_str, err_err_code);
213 }
214 
215 static void report_jr_status(const u32 status,
216 			     const char *error)
217 {
218 	debug("%08x: %s: %s() not implemented\n",
219 	       status, error, __func__);
220 }
221 
222 static void report_cond_code_status(const u32 status,
223 				    const char *error)
224 {
225 	debug("%08x: %s: %s() not implemented\n",
226 	       status, error, __func__);
227 }
228 
229 void caam_jr_strstatus(u32 status)
230 {
231 	static const struct stat_src {
232 		void (*report_ssed)(const u32 status,
233 				    const char *error);
234 		const char *error;
235 	} status_src[] = {
236 		{ NULL, "No error" },
237 		{ NULL, NULL },
238 		{ report_ccb_status, "CCB" },
239 		{ report_jump_status, "Jump" },
240 		{ report_deco_status, "DECO" },
241 		{ NULL, NULL },
242 		{ report_jr_status, "Job Ring" },
243 		{ report_cond_code_status, "Condition Code" },
244 	};
245 	u32 ssrc = status >> JRSTA_SSRC_SHIFT;
246 	const char *error = status_src[ssrc].error;
247 
248 	/*
249 	 * If there is no further error handling function, just
250 	 * print the error code, error string and exit. Otherwise
251 	 * call the handler function.
252 	 */
253 	if (!status_src[ssrc].report_ssed)
254 		debug("%08x: %s:\n", status, status_src[ssrc].error);
255 	else
256 		status_src[ssrc].report_ssed(status, error);
257 }
258