1menu "Generic Driver Options" 2 3config DM 4 bool "Enable Driver Model" 5 help 6 This config option enables Driver Model. This brings in the core 7 support, including scanning of platform data on start-up. If 8 CONFIG_OF_CONTROL is enabled, the device tree will be scanned also 9 when available. 10 11config SPL_DM 12 bool "Enable Driver Model for SPL" 13 depends on DM && SPL 14 help 15 Enable driver model in SPL. You will need to provide a 16 suitable malloc() implementation. If you are not using the 17 full malloc() enabled by CONFIG_SYS_SPL_MALLOC_START, 18 consider using CONFIG_SYS_MALLOC_SIMPLE. In that case you 19 must provide CONFIG_SPL_SYS_MALLOC_F_LEN to set the size. 20 In most cases driver model will only allocate a few uclasses 21 and devices in SPL, so 1KB should be enable. See 22 CONFIG_SPL_SYS_MALLOC_F_LEN for more details on how to enable it. 23 24config TPL_DM 25 bool "Enable Driver Model for TPL" 26 depends on DM && TPL 27 help 28 Enable driver model in TPL. You will need to provide a 29 suitable malloc() implementation. If you are not using the 30 full malloc() enabled by CONFIG_SYS_SPL_MALLOC_START, 31 consider using CONFIG_SYS_MALLOC_SIMPLE. In that case you 32 must provide CONFIG_SPL_SYS_MALLOC_F_LEN to set the size. 33 In most cases driver model will only allocate a few uclasses 34 and devices in SPL, so 1KB should be enough. See 35 CONFIG_SPL_SYS_MALLOC_F_LEN for more details on how to enable it. 36 Disable this for very small implementations. 37 38config DM_WARN 39 bool "Enable warnings in driver model" 40 depends on DM 41 default y 42 help 43 The dm_warn() function can use up quite a bit of space for its 44 strings. By default this is disabled for SPL builds to save space. 45 This will cause dm_warn() to be compiled out - it will do nothing 46 when called. 47 48config DM_DEBUG 49 bool "Enable debug messages in driver model core" 50 depends on DM 51 help 52 Say Y here if you want to compile in debug messages in DM core. 53 54config DM_DEVICE_REMOVE 55 bool "Support device removal" 56 depends on DM 57 default y 58 help 59 We can save some code space by dropping support for removing a 60 device. 61 62 Note that this may have undesirable results in the USB subsystem as 63 it causes unplugged devices to linger around in the dm-tree, and it 64 causes USB host controllers to not be stopped when booting the OS. 65 66config SPL_DM_DEVICE_REMOVE 67 bool "Support device removal in SPL" 68 depends on SPL_DM 69 default n 70 help 71 We can save some code space by dropping support for removing a 72 device. This is not normally required in SPL, so by default this 73 option is disabled for SPL. 74 75config DM_STDIO 76 bool "Support stdio registration" 77 depends on DM 78 default y 79 help 80 Normally serial drivers register with stdio so that they can be used 81 as normal output devices. In SPL we don't normally use stdio, so 82 we can omit this feature. 83 84config DM_SEQ_ALIAS 85 bool "Support numbered aliases in device tree" 86 depends on DM 87 default y 88 help 89 Most boards will have a '/aliases' node containing the path to 90 numbered devices (e.g. serial0 = &serial0). This feature can be 91 disabled if it is not required. 92 93config SPL_DM_SEQ_ALIAS 94 bool "Support numbered aliases in device tree in SPL" 95 depends on DM 96 default n 97 help 98 Most boards will have a '/aliases' node containing the path to 99 numbered devices (e.g. serial0 = &serial0). This feature can be 100 disabled if it is not required, to save code space in SPL. 101 102config REGMAP 103 bool "Support register maps" 104 depends on DM 105 help 106 Hardware peripherals tend to have one or more sets of registers 107 which can be accessed to control the hardware. A register map 108 models this with a simple read/write interface. It can in principle 109 support any bus type (I2C, SPI) but so far this only supports 110 direct memory access. 111 112config SPL_REGMAP 113 bool "Support register maps in SPL" 114 depends on SPL_DM 115 help 116 Hardware peripherals tend to have one or more sets of registers 117 which can be accessed to control the hardware. A register map 118 models this with a simple read/write interface. It can in principle 119 support any bus type (I2C, SPI) but so far this only supports 120 direct memory access. 121 122config TPL_REGMAP 123 bool "Support register maps in TPL" 124 depends on TPL_DM 125 help 126 Hardware peripherals tend to have one or more sets of registers 127 which can be accessed to control the hardware. A register map 128 models this with a simple read/write interface. It can in principle 129 support any bus type (I2C, SPI) but so far this only supports 130 direct memory access. 131 132config SYSCON 133 bool "Support system controllers" 134 depends on REGMAP 135 help 136 Many SoCs have a number of system controllers which are dealt with 137 as a group by a single driver. Some common functionality is provided 138 by this uclass, including accessing registers via regmap and 139 assigning a unique number to each. 140 141config SPL_SYSCON 142 bool "Support system controllers in SPL" 143 depends on SPL_REGMAP 144 help 145 Many SoCs have a number of system controllers which are dealt with 146 as a group by a single driver. Some common functionality is provided 147 by this uclass, including accessing registers via regmap and 148 assigning a unique number to each. 149 150config TPL_SYSCON 151 bool "Support system controllers in TPL" 152 depends on TPL_REGMAP 153 help 154 Many SoCs have a number of system controllers which are dealt with 155 as a group by a single driver. Some common functionality is provided 156 by this uclass, including accessing registers via regmap and 157 assigning a unique number to each. 158 159config DEVRES 160 bool "Managed device resources" 161 depends on DM 162 help 163 This option enables the Managed device resources core support. 164 Device resources managed by the devres framework are automatically 165 released whether initialization fails half-way or the device gets 166 detached. 167 168 If this option is disabled, devres functions fall back to 169 non-managed variants. For example, devres_alloc() to kzalloc(), 170 devm_kmalloc() to kmalloc(), etc. 171 172config DEBUG_DEVRES 173 bool "Managed device resources debugging functions" 174 depends on DEVRES 175 help 176 If this option is enabled, devres debug messages are printed. 177 Also, a function is available to dump a list of device resources. 178 Select this if you are having a problem with devres or want to 179 debug resource management for a managed device. 180 181 If you are unsure about this, Say N here. 182 183config SIMPLE_BUS 184 bool "Support simple-bus driver" 185 depends on DM && OF_CONTROL 186 default y 187 help 188 Supports the 'simple-bus' driver, which is used on some systems. 189 190config SPL_SIMPLE_BUS 191 bool "Support simple-bus driver in SPL" 192 depends on SPL_DM && SPL_OF_CONTROL 193 default y 194 help 195 Supports the 'simple-bus' driver, which is used on some systems 196 in SPL. 197 198config OF_TRANSLATE 199 bool "Translate addresses using fdt_translate_address" 200 depends on DM && OF_CONTROL 201 default y 202 help 203 If this option is enabled, the reg property will be translated 204 using the fdt_translate_address() function. This is necessary 205 on some platforms (e.g. MVEBU) using complex "ranges" 206 properties in many nodes. As this translation is not handled 207 correctly in the default simple_bus_translate() function. 208 209 If this option is not enabled, simple_bus_translate() will be 210 used for the address translation. This function is faster and 211 smaller in size than fdt_translate_address(). 212 213config SPL_OF_TRANSLATE 214 bool "Translate addresses using fdt_translate_address in SPL" 215 depends on SPL_DM && SPL_OF_CONTROL 216 default n 217 help 218 If this option is enabled, the reg property will be translated 219 using the fdt_translate_address() function. This is necessary 220 on some platforms (e.g. MVEBU) using complex "ranges" 221 properties in many nodes. As this translation is not handled 222 correctly in the default simple_bus_translate() function. 223 224 If this option is not enabled, simple_bus_translate() will be 225 used for the address translation. This function is faster and 226 smaller in size than fdt_translate_address(). 227 228config OF_ISA_BUS 229 bool 230 depends on OF_TRANSLATE 231 help 232 Is this option is enabled then support for the ISA bus will 233 be included for addresses read from DT. This is something that 234 should be known to be required or not based upon the board 235 being targetted, and whether or not it makes use of an ISA bus. 236 237 The bus is matched based upon its node name equalling "isa". The 238 busses #address-cells should equal 2, with the first cell being 239 used to hold flags & flag 0x1 indicating that the address range 240 should be accessed using I/O port in/out accessors. The second 241 cell holds the offset into ISA bus address space. The #size-cells 242 property should equal 1, and of course holds the size of the 243 address range used by a device. 244 245 If this option is not enabled then support for the ISA bus is 246 not included and any such busses used in DT will be treated as 247 typical simple-bus compatible busses. This will lead to 248 mistranslation of device addresses, so ensure that this is 249 enabled if your board does include an ISA bus. 250 251config DM_DEV_READ_INLINE 252 bool 253 default y if !OF_LIVE 254 255endmenu 256