1 /*
2  * (C) Copyright 2015 Google, Inc
3  * (C) 2017 Theobroma Systems Design und Consulting GmbH
4  *
5  * SPDX-License-Identifier:	GPL-2.0
6  */
7 
8 #include <common.h>
9 #include <clk-uclass.h>
10 #include <dm.h>
11 #include <dt-structs.h>
12 #include <errno.h>
13 #include <mapmem.h>
14 #include <syscon.h>
15 #include <asm/io.h>
16 #include <asm/arch/clock.h>
17 #include <asm/arch/cru_rk3399.h>
18 #include <asm/arch/hardware.h>
19 #include <dm/lists.h>
20 #include <dt-bindings/clock/rk3399-cru.h>
21 
22 DECLARE_GLOBAL_DATA_PTR;
23 
24 #if CONFIG_IS_ENABLED(OF_PLATDATA)
25 struct rk3399_clk_plat {
26 	struct dtd_rockchip_rk3399_cru dtd;
27 };
28 
29 struct rk3399_pmuclk_plat {
30 	struct dtd_rockchip_rk3399_pmucru dtd;
31 };
32 #endif
33 
34 struct pll_div {
35 	u32 refdiv;
36 	u32 fbdiv;
37 	u32 postdiv1;
38 	u32 postdiv2;
39 	u32 frac;
40 };
41 
42 #define RATE_TO_DIV(input_rate, output_rate) \
43 	((input_rate) / (output_rate) - 1);
44 #define DIV_TO_RATE(input_rate, div)    ((input_rate) / ((div) + 1))
45 
46 #define PLL_DIVISORS(hz, _refdiv, _postdiv1, _postdiv2) {\
47 	.refdiv = _refdiv,\
48 	.fbdiv = (u32)((u64)hz * _refdiv * _postdiv1 * _postdiv2 / OSC_HZ),\
49 	.postdiv1 = _postdiv1, .postdiv2 = _postdiv2};
50 
51 #if defined(CONFIG_SPL_BUILD)
52 static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2, 1);
53 static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2, 2);
54 #else
55 static const struct pll_div ppll_init_cfg = PLL_DIVISORS(PPLL_HZ, 2, 2, 1);
56 #endif
57 
58 static const struct pll_div apll_l_1600_cfg = PLL_DIVISORS(1600*MHz, 3, 1, 1);
59 static const struct pll_div apll_l_600_cfg = PLL_DIVISORS(600*MHz, 1, 2, 1);
60 
61 static const struct pll_div *apll_l_cfgs[] = {
62 	[APLL_L_1600_MHZ] = &apll_l_1600_cfg,
63 	[APLL_L_600_MHZ] = &apll_l_600_cfg,
64 };
65 
66 enum {
67 	/* PLL_CON0 */
68 	PLL_FBDIV_MASK			= 0xfff,
69 	PLL_FBDIV_SHIFT			= 0,
70 
71 	/* PLL_CON1 */
72 	PLL_POSTDIV2_SHIFT		= 12,
73 	PLL_POSTDIV2_MASK		= 0x7 << PLL_POSTDIV2_SHIFT,
74 	PLL_POSTDIV1_SHIFT		= 8,
75 	PLL_POSTDIV1_MASK		= 0x7 << PLL_POSTDIV1_SHIFT,
76 	PLL_REFDIV_MASK			= 0x3f,
77 	PLL_REFDIV_SHIFT		= 0,
78 
79 	/* PLL_CON2 */
80 	PLL_LOCK_STATUS_SHIFT		= 31,
81 	PLL_LOCK_STATUS_MASK		= 1 << PLL_LOCK_STATUS_SHIFT,
82 	PLL_FRACDIV_MASK		= 0xffffff,
83 	PLL_FRACDIV_SHIFT		= 0,
84 
85 	/* PLL_CON3 */
86 	PLL_MODE_SHIFT			= 8,
87 	PLL_MODE_MASK			= 3 << PLL_MODE_SHIFT,
88 	PLL_MODE_SLOW			= 0,
89 	PLL_MODE_NORM,
90 	PLL_MODE_DEEP,
91 	PLL_DSMPD_SHIFT			= 3,
92 	PLL_DSMPD_MASK			= 1 << PLL_DSMPD_SHIFT,
93 	PLL_INTEGER_MODE		= 1,
94 
95 	/* PMUCRU_CLKSEL_CON0 */
96 	PMU_PCLK_DIV_CON_MASK		= 0x1f,
97 	PMU_PCLK_DIV_CON_SHIFT		= 0,
98 
99 	/* PMUCRU_CLKSEL_CON1 */
100 	SPI3_PLL_SEL_SHIFT		= 7,
101 	SPI3_PLL_SEL_MASK		= 1 << SPI3_PLL_SEL_SHIFT,
102 	SPI3_PLL_SEL_24M		= 0,
103 	SPI3_PLL_SEL_PPLL		= 1,
104 	SPI3_DIV_CON_SHIFT		= 0x0,
105 	SPI3_DIV_CON_MASK		= 0x7f,
106 
107 	/* PMUCRU_CLKSEL_CON2 */
108 	I2C_DIV_CON_MASK		= 0x7f,
109 	CLK_I2C8_DIV_CON_SHIFT		= 8,
110 	CLK_I2C0_DIV_CON_SHIFT		= 0,
111 
112 	/* PMUCRU_CLKSEL_CON3 */
113 	CLK_I2C4_DIV_CON_SHIFT		= 0,
114 
115 	/* CLKSEL_CON0 */
116 	ACLKM_CORE_L_DIV_CON_SHIFT	= 8,
117 	ACLKM_CORE_L_DIV_CON_MASK	= 0x1f << ACLKM_CORE_L_DIV_CON_SHIFT,
118 	CLK_CORE_L_PLL_SEL_SHIFT	= 6,
119 	CLK_CORE_L_PLL_SEL_MASK		= 3 << CLK_CORE_L_PLL_SEL_SHIFT,
120 	CLK_CORE_L_PLL_SEL_ALPLL	= 0x0,
121 	CLK_CORE_L_PLL_SEL_ABPLL	= 0x1,
122 	CLK_CORE_L_PLL_SEL_DPLL		= 0x10,
123 	CLK_CORE_L_PLL_SEL_GPLL		= 0x11,
124 	CLK_CORE_L_DIV_MASK		= 0x1f,
125 	CLK_CORE_L_DIV_SHIFT		= 0,
126 
127 	/* CLKSEL_CON1 */
128 	PCLK_DBG_L_DIV_SHIFT		= 0x8,
129 	PCLK_DBG_L_DIV_MASK		= 0x1f << PCLK_DBG_L_DIV_SHIFT,
130 	ATCLK_CORE_L_DIV_SHIFT		= 0,
131 	ATCLK_CORE_L_DIV_MASK		= 0x1f << ATCLK_CORE_L_DIV_SHIFT,
132 
133 	/* CLKSEL_CON14 */
134 	PCLK_PERIHP_DIV_CON_SHIFT	= 12,
135 	PCLK_PERIHP_DIV_CON_MASK	= 0x7 << PCLK_PERIHP_DIV_CON_SHIFT,
136 	HCLK_PERIHP_DIV_CON_SHIFT	= 8,
137 	HCLK_PERIHP_DIV_CON_MASK	= 3 << HCLK_PERIHP_DIV_CON_SHIFT,
138 	ACLK_PERIHP_PLL_SEL_SHIFT	= 7,
139 	ACLK_PERIHP_PLL_SEL_MASK	= 1 << ACLK_PERIHP_PLL_SEL_SHIFT,
140 	ACLK_PERIHP_PLL_SEL_CPLL	= 0,
141 	ACLK_PERIHP_PLL_SEL_GPLL	= 1,
142 	ACLK_PERIHP_DIV_CON_SHIFT	= 0,
143 	ACLK_PERIHP_DIV_CON_MASK	= 0x1f,
144 
145 	/* CLKSEL_CON21 */
146 	ACLK_EMMC_PLL_SEL_SHIFT         = 7,
147 	ACLK_EMMC_PLL_SEL_MASK          = 0x1 << ACLK_EMMC_PLL_SEL_SHIFT,
148 	ACLK_EMMC_PLL_SEL_GPLL          = 0x1,
149 	ACLK_EMMC_DIV_CON_SHIFT         = 0,
150 	ACLK_EMMC_DIV_CON_MASK          = 0x1f,
151 
152 	/* CLKSEL_CON22 */
153 	CLK_EMMC_PLL_SHIFT              = 8,
154 	CLK_EMMC_PLL_MASK               = 0x7 << CLK_EMMC_PLL_SHIFT,
155 	CLK_EMMC_PLL_SEL_GPLL           = 0x1,
156 	CLK_EMMC_PLL_SEL_24M            = 0x5,
157 	CLK_EMMC_DIV_CON_SHIFT          = 0,
158 	CLK_EMMC_DIV_CON_MASK           = 0x7f << CLK_EMMC_DIV_CON_SHIFT,
159 
160 	/* CLKSEL_CON23 */
161 	PCLK_PERILP0_DIV_CON_SHIFT	= 12,
162 	PCLK_PERILP0_DIV_CON_MASK	= 0x7 << PCLK_PERILP0_DIV_CON_SHIFT,
163 	HCLK_PERILP0_DIV_CON_SHIFT	= 8,
164 	HCLK_PERILP0_DIV_CON_MASK	= 3 << HCLK_PERILP0_DIV_CON_SHIFT,
165 	ACLK_PERILP0_PLL_SEL_SHIFT	= 7,
166 	ACLK_PERILP0_PLL_SEL_MASK	= 1 << ACLK_PERILP0_PLL_SEL_SHIFT,
167 	ACLK_PERILP0_PLL_SEL_CPLL	= 0,
168 	ACLK_PERILP0_PLL_SEL_GPLL	= 1,
169 	ACLK_PERILP0_DIV_CON_SHIFT	= 0,
170 	ACLK_PERILP0_DIV_CON_MASK	= 0x1f,
171 
172 	/* CLKSEL_CON25 */
173 	PCLK_PERILP1_DIV_CON_SHIFT	= 8,
174 	PCLK_PERILP1_DIV_CON_MASK	= 0x7 << PCLK_PERILP1_DIV_CON_SHIFT,
175 	HCLK_PERILP1_PLL_SEL_SHIFT	= 7,
176 	HCLK_PERILP1_PLL_SEL_MASK	= 1 << HCLK_PERILP1_PLL_SEL_SHIFT,
177 	HCLK_PERILP1_PLL_SEL_CPLL	= 0,
178 	HCLK_PERILP1_PLL_SEL_GPLL	= 1,
179 	HCLK_PERILP1_DIV_CON_SHIFT	= 0,
180 	HCLK_PERILP1_DIV_CON_MASK	= 0x1f,
181 
182 	/* CLKSEL_CON26 */
183 	CLK_SARADC_DIV_CON_SHIFT	= 8,
184 	CLK_SARADC_DIV_CON_MASK		= 0xff << CLK_SARADC_DIV_CON_SHIFT,
185 
186 	/* CLKSEL_CON27 */
187 	CLK_TSADC_SEL_X24M		= 0x0,
188 	CLK_TSADC_SEL_SHIFT		= 15,
189 	CLK_TSADC_SEL_MASK		= 1 << CLK_TSADC_SEL_SHIFT,
190 	CLK_TSADC_DIV_CON_SHIFT		= 0,
191 	CLK_TSADC_DIV_CON_MASK		= 0x3ff,
192 
193 	/* CLKSEL_CON47 & CLKSEL_CON48 */
194 	ACLK_VOP_PLL_SEL_SHIFT		= 6,
195 	ACLK_VOP_PLL_SEL_MASK		= 0x3 << ACLK_VOP_PLL_SEL_SHIFT,
196 	ACLK_VOP_PLL_SEL_CPLL		= 0x1,
197 	ACLK_VOP_DIV_CON_SHIFT		= 0,
198 	ACLK_VOP_DIV_CON_MASK		= 0x1f << ACLK_VOP_DIV_CON_SHIFT,
199 
200 	/* CLKSEL_CON49 & CLKSEL_CON50 */
201 	DCLK_VOP_DCLK_SEL_SHIFT         = 11,
202 	DCLK_VOP_DCLK_SEL_MASK          = 1 << DCLK_VOP_DCLK_SEL_SHIFT,
203 	DCLK_VOP_DCLK_SEL_DIVOUT        = 0,
204 	DCLK_VOP_PLL_SEL_SHIFT          = 8,
205 	DCLK_VOP_PLL_SEL_MASK           = 3 << DCLK_VOP_PLL_SEL_SHIFT,
206 	DCLK_VOP_PLL_SEL_VPLL           = 0,
207 	DCLK_VOP_DIV_CON_MASK           = 0xff,
208 	DCLK_VOP_DIV_CON_SHIFT          = 0,
209 
210 	/* CLKSEL_CON58 */
211 	CLK_SPI_PLL_SEL_WIDTH = 1,
212 	CLK_SPI_PLL_SEL_MASK = ((1 < CLK_SPI_PLL_SEL_WIDTH) - 1),
213 	CLK_SPI_PLL_SEL_CPLL = 0,
214 	CLK_SPI_PLL_SEL_GPLL = 1,
215 	CLK_SPI_PLL_DIV_CON_WIDTH = 7,
216 	CLK_SPI_PLL_DIV_CON_MASK = ((1 << CLK_SPI_PLL_DIV_CON_WIDTH) - 1),
217 
218 	CLK_SPI5_PLL_DIV_CON_SHIFT      = 8,
219 	CLK_SPI5_PLL_SEL_SHIFT	        = 15,
220 
221 	/* CLKSEL_CON59 */
222 	CLK_SPI1_PLL_SEL_SHIFT		= 15,
223 	CLK_SPI1_PLL_DIV_CON_SHIFT	= 8,
224 	CLK_SPI0_PLL_SEL_SHIFT		= 7,
225 	CLK_SPI0_PLL_DIV_CON_SHIFT	= 0,
226 
227 	/* CLKSEL_CON60 */
228 	CLK_SPI4_PLL_SEL_SHIFT		= 15,
229 	CLK_SPI4_PLL_DIV_CON_SHIFT	= 8,
230 	CLK_SPI2_PLL_SEL_SHIFT		= 7,
231 	CLK_SPI2_PLL_DIV_CON_SHIFT	= 0,
232 
233 	/* CLKSEL_CON61 */
234 	CLK_I2C_PLL_SEL_MASK		= 1,
235 	CLK_I2C_PLL_SEL_CPLL		= 0,
236 	CLK_I2C_PLL_SEL_GPLL		= 1,
237 	CLK_I2C5_PLL_SEL_SHIFT		= 15,
238 	CLK_I2C5_DIV_CON_SHIFT		= 8,
239 	CLK_I2C1_PLL_SEL_SHIFT		= 7,
240 	CLK_I2C1_DIV_CON_SHIFT		= 0,
241 
242 	/* CLKSEL_CON62 */
243 	CLK_I2C6_PLL_SEL_SHIFT		= 15,
244 	CLK_I2C6_DIV_CON_SHIFT		= 8,
245 	CLK_I2C2_PLL_SEL_SHIFT		= 7,
246 	CLK_I2C2_DIV_CON_SHIFT		= 0,
247 
248 	/* CLKSEL_CON63 */
249 	CLK_I2C7_PLL_SEL_SHIFT		= 15,
250 	CLK_I2C7_DIV_CON_SHIFT		= 8,
251 	CLK_I2C3_PLL_SEL_SHIFT		= 7,
252 	CLK_I2C3_DIV_CON_SHIFT		= 0,
253 
254 	/* CRU_SOFTRST_CON4 */
255 	RESETN_DDR0_REQ_SHIFT		= 8,
256 	RESETN_DDR0_REQ_MASK		= 1 << RESETN_DDR0_REQ_SHIFT,
257 	RESETN_DDRPHY0_REQ_SHIFT	= 9,
258 	RESETN_DDRPHY0_REQ_MASK		= 1 << RESETN_DDRPHY0_REQ_SHIFT,
259 	RESETN_DDR1_REQ_SHIFT		= 12,
260 	RESETN_DDR1_REQ_MASK		= 1 << RESETN_DDR1_REQ_SHIFT,
261 	RESETN_DDRPHY1_REQ_SHIFT	= 13,
262 	RESETN_DDRPHY1_REQ_MASK		= 1 << RESETN_DDRPHY1_REQ_SHIFT,
263 };
264 
265 #define VCO_MAX_KHZ	(3200 * (MHz / KHz))
266 #define VCO_MIN_KHZ	(800 * (MHz / KHz))
267 #define OUTPUT_MAX_KHZ	(3200 * (MHz / KHz))
268 #define OUTPUT_MIN_KHZ	(16 * (MHz / KHz))
269 
270 /*
271  *  the div restructions of pll in integer mode, these are defined in
272  *  * CRU_*PLL_CON0 or PMUCRU_*PLL_CON0
273  */
274 #define PLL_DIV_MIN	16
275 #define PLL_DIV_MAX	3200
276 
277 /*
278  * How to calculate the PLL(from TRM V0.3 Part 1 Page 63):
279  * Formulas also embedded within the Fractional PLL Verilog model:
280  * If DSMPD = 1 (DSM is disabled, "integer mode")
281  * FOUTVCO = FREF / REFDIV * FBDIV
282  * FOUTPOSTDIV = FOUTVCO / POSTDIV1 / POSTDIV2
283  * Where:
284  * FOUTVCO = Fractional PLL non-divided output frequency
285  * FOUTPOSTDIV = Fractional PLL divided output frequency
286  *               (output of second post divider)
287  * FREF = Fractional PLL input reference frequency, (the OSC_HZ 24MHz input)
288  * REFDIV = Fractional PLL input reference clock divider
289  * FBDIV = Integer value programmed into feedback divide
290  *
291  */
292 static void rkclk_set_pll(u32 *pll_con, const struct pll_div *div)
293 {
294 	/* All 8 PLLs have same VCO and output frequency range restrictions. */
295 	u32 vco_khz = OSC_HZ / 1000 * div->fbdiv / div->refdiv;
296 	u32 output_khz = vco_khz / div->postdiv1 / div->postdiv2;
297 
298 	debug("PLL at %p: fbdiv=%d, refdiv=%d, postdiv1=%d, "
299 			   "postdiv2=%d, vco=%u khz, output=%u khz\n",
300 			   pll_con, div->fbdiv, div->refdiv, div->postdiv1,
301 			   div->postdiv2, vco_khz, output_khz);
302 	assert(vco_khz >= VCO_MIN_KHZ && vco_khz <= VCO_MAX_KHZ &&
303 	       output_khz >= OUTPUT_MIN_KHZ && output_khz <= OUTPUT_MAX_KHZ &&
304 	       div->fbdiv >= PLL_DIV_MIN && div->fbdiv <= PLL_DIV_MAX);
305 
306 	/*
307 	 * When power on or changing PLL setting,
308 	 * we must force PLL into slow mode to ensure output stable clock.
309 	 */
310 	rk_clrsetreg(&pll_con[3], PLL_MODE_MASK,
311 		     PLL_MODE_SLOW << PLL_MODE_SHIFT);
312 
313 	/* use integer mode */
314 	rk_clrsetreg(&pll_con[3], PLL_DSMPD_MASK,
315 		     PLL_INTEGER_MODE << PLL_DSMPD_SHIFT);
316 
317 	rk_clrsetreg(&pll_con[0], PLL_FBDIV_MASK,
318 		     div->fbdiv << PLL_FBDIV_SHIFT);
319 	rk_clrsetreg(&pll_con[1],
320 		     PLL_POSTDIV2_MASK | PLL_POSTDIV1_MASK |
321 		     PLL_REFDIV_MASK | PLL_REFDIV_SHIFT,
322 		     (div->postdiv2 << PLL_POSTDIV2_SHIFT) |
323 		     (div->postdiv1 << PLL_POSTDIV1_SHIFT) |
324 		     (div->refdiv << PLL_REFDIV_SHIFT));
325 
326 	/* waiting for pll lock */
327 	while (!(readl(&pll_con[2]) & (1 << PLL_LOCK_STATUS_SHIFT)))
328 		udelay(1);
329 
330 	/* pll enter normal mode */
331 	rk_clrsetreg(&pll_con[3], PLL_MODE_MASK,
332 		     PLL_MODE_NORM << PLL_MODE_SHIFT);
333 }
334 
335 static int pll_para_config(u32 freq_hz, struct pll_div *div)
336 {
337 	u32 ref_khz = OSC_HZ / KHz, refdiv, fbdiv = 0;
338 	u32 postdiv1, postdiv2 = 1;
339 	u32 fref_khz;
340 	u32 diff_khz, best_diff_khz;
341 	const u32 max_refdiv = 63, max_fbdiv = 3200, min_fbdiv = 16;
342 	const u32 max_postdiv1 = 7, max_postdiv2 = 7;
343 	u32 vco_khz;
344 	u32 freq_khz = freq_hz / KHz;
345 
346 	if (!freq_hz) {
347 		printf("%s: the frequency can't be 0 Hz\n", __func__);
348 		return -1;
349 	}
350 
351 	postdiv1 = DIV_ROUND_UP(VCO_MIN_KHZ, freq_khz);
352 	if (postdiv1 > max_postdiv1) {
353 		postdiv2 = DIV_ROUND_UP(postdiv1, max_postdiv1);
354 		postdiv1 = DIV_ROUND_UP(postdiv1, postdiv2);
355 	}
356 
357 	vco_khz = freq_khz * postdiv1 * postdiv2;
358 
359 	if (vco_khz < VCO_MIN_KHZ || vco_khz > VCO_MAX_KHZ ||
360 	    postdiv2 > max_postdiv2) {
361 		printf("%s: Cannot find out a supported VCO"
362 		       " for Frequency (%uHz).\n", __func__, freq_hz);
363 		return -1;
364 	}
365 
366 	div->postdiv1 = postdiv1;
367 	div->postdiv2 = postdiv2;
368 
369 	best_diff_khz = vco_khz;
370 	for (refdiv = 1; refdiv < max_refdiv && best_diff_khz; refdiv++) {
371 		fref_khz = ref_khz / refdiv;
372 
373 		fbdiv = vco_khz / fref_khz;
374 		if ((fbdiv >= max_fbdiv) || (fbdiv <= min_fbdiv))
375 			continue;
376 		diff_khz = vco_khz - fbdiv * fref_khz;
377 		if (fbdiv + 1 < max_fbdiv && diff_khz > fref_khz / 2) {
378 			fbdiv++;
379 			diff_khz = fref_khz - diff_khz;
380 		}
381 
382 		if (diff_khz >= best_diff_khz)
383 			continue;
384 
385 		best_diff_khz = diff_khz;
386 		div->refdiv = refdiv;
387 		div->fbdiv = fbdiv;
388 	}
389 
390 	if (best_diff_khz > 4 * (MHz/KHz)) {
391 		printf("%s: Failed to match output frequency %u, "
392 		       "difference is %u Hz,exceed 4MHZ\n", __func__, freq_hz,
393 		       best_diff_khz * KHz);
394 		return -1;
395 	}
396 	return 0;
397 }
398 
399 #ifdef CONFIG_SPL_BUILD
400 static void rkclk_init(struct rk3399_cru *cru)
401 {
402 	u32 aclk_div;
403 	u32 hclk_div;
404 	u32 pclk_div;
405 
406 	/*
407 	 * some cru registers changed by bootrom, we'd better reset them to
408 	 * reset/default values described in TRM to avoid confusion in kernel.
409 	 * Please consider these three lines as a fix of bootrom bug.
410 	 */
411 	rk_clrsetreg(&cru->clksel_con[12], 0xffff, 0x4101);
412 	rk_clrsetreg(&cru->clksel_con[19], 0xffff, 0x033f);
413 	rk_clrsetreg(&cru->clksel_con[56], 0x0003, 0x0003);
414 
415 	/* configure gpll cpll */
416 	rkclk_set_pll(&cru->gpll_con[0], &gpll_init_cfg);
417 	rkclk_set_pll(&cru->cpll_con[0], &cpll_init_cfg);
418 
419 	/* configure perihp aclk, hclk, pclk */
420 	aclk_div = GPLL_HZ / PERIHP_ACLK_HZ - 1;
421 	assert((aclk_div + 1) * PERIHP_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
422 
423 	hclk_div = PERIHP_ACLK_HZ / PERIHP_HCLK_HZ - 1;
424 	assert((hclk_div + 1) * PERIHP_HCLK_HZ ==
425 	       PERIHP_ACLK_HZ && (hclk_div < 0x4));
426 
427 	pclk_div = PERIHP_ACLK_HZ / PERIHP_PCLK_HZ - 1;
428 	assert((pclk_div + 1) * PERIHP_PCLK_HZ ==
429 	       PERIHP_ACLK_HZ && (pclk_div < 0x7));
430 
431 	rk_clrsetreg(&cru->clksel_con[14],
432 		     PCLK_PERIHP_DIV_CON_MASK | HCLK_PERIHP_DIV_CON_MASK |
433 		     ACLK_PERIHP_PLL_SEL_MASK | ACLK_PERIHP_DIV_CON_MASK,
434 		     pclk_div << PCLK_PERIHP_DIV_CON_SHIFT |
435 		     hclk_div << HCLK_PERIHP_DIV_CON_SHIFT |
436 		     ACLK_PERIHP_PLL_SEL_GPLL << ACLK_PERIHP_PLL_SEL_SHIFT |
437 		     aclk_div << ACLK_PERIHP_DIV_CON_SHIFT);
438 
439 	/* configure perilp0 aclk, hclk, pclk */
440 	aclk_div = GPLL_HZ / PERILP0_ACLK_HZ - 1;
441 	assert((aclk_div + 1) * PERILP0_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
442 
443 	hclk_div = PERILP0_ACLK_HZ / PERILP0_HCLK_HZ - 1;
444 	assert((hclk_div + 1) * PERILP0_HCLK_HZ ==
445 	       PERILP0_ACLK_HZ && (hclk_div < 0x4));
446 
447 	pclk_div = PERILP0_ACLK_HZ / PERILP0_PCLK_HZ - 1;
448 	assert((pclk_div + 1) * PERILP0_PCLK_HZ ==
449 	       PERILP0_ACLK_HZ && (pclk_div < 0x7));
450 
451 	rk_clrsetreg(&cru->clksel_con[23],
452 		     PCLK_PERILP0_DIV_CON_MASK | HCLK_PERILP0_DIV_CON_MASK |
453 		     ACLK_PERILP0_PLL_SEL_MASK | ACLK_PERILP0_DIV_CON_MASK,
454 		     pclk_div << PCLK_PERILP0_DIV_CON_SHIFT |
455 		     hclk_div << HCLK_PERILP0_DIV_CON_SHIFT |
456 		     ACLK_PERILP0_PLL_SEL_GPLL << ACLK_PERILP0_PLL_SEL_SHIFT |
457 		     aclk_div << ACLK_PERILP0_DIV_CON_SHIFT);
458 
459 	/* perilp1 hclk select gpll as source */
460 	hclk_div = GPLL_HZ / PERILP1_HCLK_HZ - 1;
461 	assert((hclk_div + 1) * PERILP1_HCLK_HZ ==
462 	       GPLL_HZ && (hclk_div < 0x1f));
463 
464 	pclk_div = PERILP1_HCLK_HZ / PERILP1_HCLK_HZ - 1;
465 	assert((pclk_div + 1) * PERILP1_HCLK_HZ ==
466 	       PERILP1_HCLK_HZ && (hclk_div < 0x7));
467 
468 	rk_clrsetreg(&cru->clksel_con[25],
469 		     PCLK_PERILP1_DIV_CON_MASK | HCLK_PERILP1_DIV_CON_MASK |
470 		     HCLK_PERILP1_PLL_SEL_MASK,
471 		     pclk_div << PCLK_PERILP1_DIV_CON_SHIFT |
472 		     hclk_div << HCLK_PERILP1_DIV_CON_SHIFT |
473 		     HCLK_PERILP1_PLL_SEL_GPLL << HCLK_PERILP1_PLL_SEL_SHIFT);
474 }
475 #endif
476 
477 void rk3399_configure_cpu(struct rk3399_cru *cru,
478 			  enum apll_l_frequencies apll_l_freq)
479 {
480 	u32 aclkm_div;
481 	u32 pclk_dbg_div;
482 	u32 atclk_div;
483 
484 	rkclk_set_pll(&cru->apll_l_con[0], apll_l_cfgs[apll_l_freq]);
485 
486 	aclkm_div = APLL_HZ / ACLKM_CORE_HZ - 1;
487 	assert((aclkm_div + 1) * ACLKM_CORE_HZ == APLL_HZ &&
488 	       aclkm_div < 0x1f);
489 
490 	pclk_dbg_div = APLL_HZ / PCLK_DBG_HZ - 1;
491 	assert((pclk_dbg_div + 1) * PCLK_DBG_HZ == APLL_HZ &&
492 	       pclk_dbg_div < 0x1f);
493 
494 	atclk_div = APLL_HZ / ATCLK_CORE_HZ - 1;
495 	assert((atclk_div + 1) * ATCLK_CORE_HZ == APLL_HZ &&
496 	       atclk_div < 0x1f);
497 
498 	rk_clrsetreg(&cru->clksel_con[0],
499 		     ACLKM_CORE_L_DIV_CON_MASK | CLK_CORE_L_PLL_SEL_MASK |
500 		     CLK_CORE_L_DIV_MASK,
501 		     aclkm_div << ACLKM_CORE_L_DIV_CON_SHIFT |
502 		     CLK_CORE_L_PLL_SEL_ALPLL << CLK_CORE_L_PLL_SEL_SHIFT |
503 		     0 << CLK_CORE_L_DIV_SHIFT);
504 
505 	rk_clrsetreg(&cru->clksel_con[1],
506 		     PCLK_DBG_L_DIV_MASK | ATCLK_CORE_L_DIV_MASK,
507 		     pclk_dbg_div << PCLK_DBG_L_DIV_SHIFT |
508 		     atclk_div << ATCLK_CORE_L_DIV_SHIFT);
509 }
510 #define I2C_CLK_REG_MASK(bus) \
511 			(I2C_DIV_CON_MASK << \
512 			CLK_I2C ##bus## _DIV_CON_SHIFT | \
513 			CLK_I2C_PLL_SEL_MASK << \
514 			CLK_I2C ##bus## _PLL_SEL_SHIFT)
515 
516 #define I2C_CLK_REG_VALUE(bus, clk_div) \
517 			      ((clk_div - 1) << \
518 					CLK_I2C ##bus## _DIV_CON_SHIFT | \
519 			      CLK_I2C_PLL_SEL_GPLL << \
520 					CLK_I2C ##bus## _PLL_SEL_SHIFT)
521 
522 #define I2C_CLK_DIV_VALUE(con, bus) \
523 			(con >> CLK_I2C ##bus## _DIV_CON_SHIFT) & \
524 				I2C_DIV_CON_MASK;
525 
526 #define I2C_PMUCLK_REG_MASK(bus) \
527 			(I2C_DIV_CON_MASK << \
528 			 CLK_I2C ##bus## _DIV_CON_SHIFT)
529 
530 #define I2C_PMUCLK_REG_VALUE(bus, clk_div) \
531 				((clk_div - 1) << \
532 				CLK_I2C ##bus## _DIV_CON_SHIFT)
533 
534 static ulong rk3399_i2c_get_clk(struct rk3399_cru *cru, ulong clk_id)
535 {
536 	u32 div, con;
537 
538 	switch (clk_id) {
539 	case SCLK_I2C1:
540 		con = readl(&cru->clksel_con[61]);
541 		div = I2C_CLK_DIV_VALUE(con, 1);
542 		break;
543 	case SCLK_I2C2:
544 		con = readl(&cru->clksel_con[62]);
545 		div = I2C_CLK_DIV_VALUE(con, 2);
546 		break;
547 	case SCLK_I2C3:
548 		con = readl(&cru->clksel_con[63]);
549 		div = I2C_CLK_DIV_VALUE(con, 3);
550 		break;
551 	case SCLK_I2C5:
552 		con = readl(&cru->clksel_con[61]);
553 		div = I2C_CLK_DIV_VALUE(con, 5);
554 		break;
555 	case SCLK_I2C6:
556 		con = readl(&cru->clksel_con[62]);
557 		div = I2C_CLK_DIV_VALUE(con, 6);
558 		break;
559 	case SCLK_I2C7:
560 		con = readl(&cru->clksel_con[63]);
561 		div = I2C_CLK_DIV_VALUE(con, 7);
562 		break;
563 	default:
564 		printf("do not support this i2c bus\n");
565 		return -EINVAL;
566 	}
567 
568 	return DIV_TO_RATE(GPLL_HZ, div);
569 }
570 
571 static ulong rk3399_i2c_set_clk(struct rk3399_cru *cru, ulong clk_id, uint hz)
572 {
573 	int src_clk_div;
574 
575 	/* i2c0,4,8 src clock from ppll, i2c1,2,3,5,6,7 src clock from gpll*/
576 	src_clk_div = GPLL_HZ / hz;
577 	assert(src_clk_div - 1 < 127);
578 
579 	switch (clk_id) {
580 	case SCLK_I2C1:
581 		rk_clrsetreg(&cru->clksel_con[61], I2C_CLK_REG_MASK(1),
582 			     I2C_CLK_REG_VALUE(1, src_clk_div));
583 		break;
584 	case SCLK_I2C2:
585 		rk_clrsetreg(&cru->clksel_con[62], I2C_CLK_REG_MASK(2),
586 			     I2C_CLK_REG_VALUE(2, src_clk_div));
587 		break;
588 	case SCLK_I2C3:
589 		rk_clrsetreg(&cru->clksel_con[63], I2C_CLK_REG_MASK(3),
590 			     I2C_CLK_REG_VALUE(3, src_clk_div));
591 		break;
592 	case SCLK_I2C5:
593 		rk_clrsetreg(&cru->clksel_con[61], I2C_CLK_REG_MASK(5),
594 			     I2C_CLK_REG_VALUE(5, src_clk_div));
595 		break;
596 	case SCLK_I2C6:
597 		rk_clrsetreg(&cru->clksel_con[62], I2C_CLK_REG_MASK(6),
598 			     I2C_CLK_REG_VALUE(6, src_clk_div));
599 		break;
600 	case SCLK_I2C7:
601 		rk_clrsetreg(&cru->clksel_con[63], I2C_CLK_REG_MASK(7),
602 			     I2C_CLK_REG_VALUE(7, src_clk_div));
603 		break;
604 	default:
605 		printf("do not support this i2c bus\n");
606 		return -EINVAL;
607 	}
608 
609 	return rk3399_i2c_get_clk(cru, clk_id);
610 }
611 
612 /*
613  * RK3399 SPI clocks have a common divider-width (7 bits) and a single bit
614  * to select either CPLL or GPLL as the clock-parent. The location within
615  * the enclosing CLKSEL_CON (i.e. div_shift and sel_shift) are variable.
616  */
617 
618 struct spi_clkreg {
619 	uint8_t reg;  /* CLKSEL_CON[reg] register in CRU */
620 	uint8_t div_shift;
621 	uint8_t sel_shift;
622 };
623 
624 /*
625  * The entries are numbered relative to their offset from SCLK_SPI0.
626  *
627  * Note that SCLK_SPI3 (which is configured via PMUCRU and requires different
628  * logic is not supported).
629  */
630 static const struct spi_clkreg spi_clkregs[] = {
631 	[0] = { .reg = 59,
632 		.div_shift = CLK_SPI0_PLL_DIV_CON_SHIFT,
633 		.sel_shift = CLK_SPI0_PLL_SEL_SHIFT, },
634 	[1] = { .reg = 59,
635 		.div_shift = CLK_SPI1_PLL_DIV_CON_SHIFT,
636 		.sel_shift = CLK_SPI1_PLL_SEL_SHIFT, },
637 	[2] = { .reg = 60,
638 		.div_shift = CLK_SPI2_PLL_DIV_CON_SHIFT,
639 		.sel_shift = CLK_SPI2_PLL_SEL_SHIFT, },
640 	[3] = { .reg = 60,
641 		.div_shift = CLK_SPI4_PLL_DIV_CON_SHIFT,
642 		.sel_shift = CLK_SPI4_PLL_SEL_SHIFT, },
643 	[4] = { .reg = 58,
644 		.div_shift = CLK_SPI5_PLL_DIV_CON_SHIFT,
645 		.sel_shift = CLK_SPI5_PLL_SEL_SHIFT, },
646 };
647 
648 static inline u32 extract_bits(u32 val, unsigned width, unsigned shift)
649 {
650 	return (val >> shift) & ((1 << width) - 1);
651 }
652 
653 static ulong rk3399_spi_get_clk(struct rk3399_cru *cru, ulong clk_id)
654 {
655 	const struct spi_clkreg *spiclk = NULL;
656 	u32 div, val;
657 
658 	switch (clk_id) {
659 	case SCLK_SPI0 ... SCLK_SPI5:
660 		spiclk = &spi_clkregs[clk_id - SCLK_SPI0];
661 		break;
662 
663 	default:
664 		error("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
665 		return -EINVAL;
666 	}
667 
668 	val = readl(&cru->clksel_con[spiclk->reg]);
669 	div = extract_bits(val, CLK_SPI_PLL_DIV_CON_WIDTH, spiclk->div_shift);
670 
671 	return DIV_TO_RATE(GPLL_HZ, div);
672 }
673 
674 static ulong rk3399_spi_set_clk(struct rk3399_cru *cru, ulong clk_id, uint hz)
675 {
676 	const struct spi_clkreg *spiclk = NULL;
677 	int src_clk_div;
678 
679 	src_clk_div = DIV_ROUND_UP(GPLL_HZ, hz) - 1;
680 	assert(src_clk_div < 128);
681 
682 	switch (clk_id) {
683 	case SCLK_SPI1 ... SCLK_SPI5:
684 		spiclk = &spi_clkregs[clk_id - SCLK_SPI0];
685 		break;
686 
687 	default:
688 		error("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
689 		return -EINVAL;
690 	}
691 
692 	rk_clrsetreg(&cru->clksel_con[spiclk->reg],
693 		     ((CLK_SPI_PLL_DIV_CON_MASK << spiclk->div_shift) |
694 		       (CLK_SPI_PLL_SEL_GPLL << spiclk->sel_shift)),
695 		     ((src_clk_div << spiclk->div_shift) |
696 		      (CLK_SPI_PLL_SEL_GPLL << spiclk->sel_shift)));
697 
698 	return rk3399_spi_get_clk(cru, clk_id);
699 }
700 
701 static ulong rk3399_vop_set_clk(struct rk3399_cru *cru, ulong clk_id, u32 hz)
702 {
703 	struct pll_div vpll_config = {0};
704 	int aclk_vop = 198*MHz;
705 	void *aclkreg_addr, *dclkreg_addr;
706 	u32 div;
707 
708 	switch (clk_id) {
709 	case DCLK_VOP0:
710 		aclkreg_addr = &cru->clksel_con[47];
711 		dclkreg_addr = &cru->clksel_con[49];
712 		break;
713 	case DCLK_VOP1:
714 		aclkreg_addr = &cru->clksel_con[48];
715 		dclkreg_addr = &cru->clksel_con[50];
716 		break;
717 	default:
718 		return -EINVAL;
719 	}
720 	/* vop aclk source clk: cpll */
721 	div = CPLL_HZ / aclk_vop;
722 	assert(div - 1 < 32);
723 
724 	rk_clrsetreg(aclkreg_addr,
725 		     ACLK_VOP_PLL_SEL_MASK | ACLK_VOP_DIV_CON_MASK,
726 		     ACLK_VOP_PLL_SEL_CPLL << ACLK_VOP_PLL_SEL_SHIFT |
727 		     (div - 1) << ACLK_VOP_DIV_CON_SHIFT);
728 
729 	/* vop dclk source from vpll, and equals to vpll(means div == 1) */
730 	if (pll_para_config(hz, &vpll_config))
731 		return -1;
732 
733 	rkclk_set_pll(&cru->vpll_con[0], &vpll_config);
734 
735 	rk_clrsetreg(dclkreg_addr,
736 		     DCLK_VOP_DCLK_SEL_MASK | DCLK_VOP_PLL_SEL_MASK|
737 		     DCLK_VOP_DIV_CON_MASK,
738 		     DCLK_VOP_DCLK_SEL_DIVOUT << DCLK_VOP_DCLK_SEL_SHIFT |
739 		     DCLK_VOP_PLL_SEL_VPLL << DCLK_VOP_PLL_SEL_SHIFT |
740 		     (1 - 1) << DCLK_VOP_DIV_CON_SHIFT);
741 
742 	return hz;
743 }
744 
745 static ulong rk3399_mmc_get_clk(struct rk3399_cru *cru, uint clk_id)
746 {
747 	u32 div, con;
748 
749 	switch (clk_id) {
750 	case HCLK_SDMMC:
751 	case SCLK_SDMMC:
752 		con = readl(&cru->clksel_con[16]);
753 		/* dwmmc controller have internal div 2 */
754 		div = 2;
755 		break;
756 	case SCLK_EMMC:
757 		con = readl(&cru->clksel_con[21]);
758 		div = 1;
759 		break;
760 	default:
761 		return -EINVAL;
762 	}
763 
764 	div *= (con & CLK_EMMC_DIV_CON_MASK) >> CLK_EMMC_DIV_CON_SHIFT;
765 	if ((con & CLK_EMMC_PLL_MASK) >> CLK_EMMC_PLL_SHIFT
766 			== CLK_EMMC_PLL_SEL_24M)
767 		return DIV_TO_RATE(OSC_HZ, div);
768 	else
769 		return DIV_TO_RATE(GPLL_HZ, div);
770 }
771 
772 static ulong rk3399_mmc_set_clk(struct rk3399_cru *cru,
773 				ulong clk_id, ulong set_rate)
774 {
775 	int src_clk_div;
776 	int aclk_emmc = 198*MHz;
777 
778 	switch (clk_id) {
779 	case HCLK_SDMMC:
780 	case SCLK_SDMMC:
781 		/* Select clk_sdmmc source from GPLL by default */
782 		/* mmc clock defaulg div 2 internal, provide double in cru */
783 		src_clk_div = DIV_ROUND_UP(GPLL_HZ / 2, set_rate);
784 
785 		if (src_clk_div > 128) {
786 			/* use 24MHz source for 400KHz clock */
787 			src_clk_div = DIV_ROUND_UP(OSC_HZ / 2, set_rate);
788 			assert(src_clk_div - 1 < 128);
789 			rk_clrsetreg(&cru->clksel_con[16],
790 				     CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK,
791 				     CLK_EMMC_PLL_SEL_24M << CLK_EMMC_PLL_SHIFT |
792 				     (src_clk_div - 1) << CLK_EMMC_DIV_CON_SHIFT);
793 		} else {
794 			rk_clrsetreg(&cru->clksel_con[16],
795 				     CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK,
796 				     CLK_EMMC_PLL_SEL_GPLL << CLK_EMMC_PLL_SHIFT |
797 				     (src_clk_div - 1) << CLK_EMMC_DIV_CON_SHIFT);
798 		}
799 		break;
800 	case SCLK_EMMC:
801 		/* Select aclk_emmc source from GPLL */
802 		src_clk_div = DIV_ROUND_UP(GPLL_HZ , aclk_emmc);
803 		assert(src_clk_div - 1 < 32);
804 
805 		rk_clrsetreg(&cru->clksel_con[21],
806 			     ACLK_EMMC_PLL_SEL_MASK | ACLK_EMMC_DIV_CON_MASK,
807 			     ACLK_EMMC_PLL_SEL_GPLL << ACLK_EMMC_PLL_SEL_SHIFT |
808 			     (src_clk_div - 1) << ACLK_EMMC_DIV_CON_SHIFT);
809 
810 		/* Select clk_emmc source from GPLL too */
811 		src_clk_div = DIV_ROUND_UP(GPLL_HZ, set_rate);
812 		assert(src_clk_div - 1 < 128);
813 
814 		rk_clrsetreg(&cru->clksel_con[22],
815 			     CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK,
816 			     CLK_EMMC_PLL_SEL_GPLL << CLK_EMMC_PLL_SHIFT |
817 			     (src_clk_div - 1) << CLK_EMMC_DIV_CON_SHIFT);
818 		break;
819 	default:
820 		return -EINVAL;
821 	}
822 	return rk3399_mmc_get_clk(cru, clk_id);
823 }
824 
825 #define PMUSGRF_DDR_RGN_CON16 0xff330040
826 static ulong rk3399_ddr_set_clk(struct rk3399_cru *cru,
827 				ulong set_rate)
828 {
829 	struct pll_div dpll_cfg;
830 
831 	/*  IC ECO bug, need to set this register */
832 	writel(0xc000c000, PMUSGRF_DDR_RGN_CON16);
833 
834 	/*  clk_ddrc == DPLL = 24MHz / refdiv * fbdiv / postdiv1 / postdiv2 */
835 	switch (set_rate) {
836 	case 200*MHz:
837 		dpll_cfg = (struct pll_div)
838 		{.refdiv = 1, .fbdiv = 50, .postdiv1 = 6, .postdiv2 = 1};
839 		break;
840 	case 300*MHz:
841 		dpll_cfg = (struct pll_div)
842 		{.refdiv = 2, .fbdiv = 100, .postdiv1 = 4, .postdiv2 = 1};
843 		break;
844 	case 666*MHz:
845 		dpll_cfg = (struct pll_div)
846 		{.refdiv = 2, .fbdiv = 111, .postdiv1 = 2, .postdiv2 = 1};
847 		break;
848 	case 800*MHz:
849 		dpll_cfg = (struct pll_div)
850 		{.refdiv = 1, .fbdiv = 100, .postdiv1 = 3, .postdiv2 = 1};
851 		break;
852 	case 933*MHz:
853 		dpll_cfg = (struct pll_div)
854 		{.refdiv = 1, .fbdiv = 116, .postdiv1 = 3, .postdiv2 = 1};
855 		break;
856 	default:
857 		error("Unsupported SDRAM frequency!,%ld\n", set_rate);
858 	}
859 	rkclk_set_pll(&cru->dpll_con[0], &dpll_cfg);
860 
861 	return set_rate;
862 }
863 static ulong rk3399_clk_get_rate(struct clk *clk)
864 {
865 	struct rk3399_clk_priv *priv = dev_get_priv(clk->dev);
866 	ulong rate = 0;
867 
868 	switch (clk->id) {
869 	case 0 ... 63:
870 		return 0;
871 	case HCLK_SDMMC:
872 	case SCLK_SDMMC:
873 	case SCLK_EMMC:
874 		rate = rk3399_mmc_get_clk(priv->cru, clk->id);
875 		break;
876 	case SCLK_I2C1:
877 	case SCLK_I2C2:
878 	case SCLK_I2C3:
879 	case SCLK_I2C5:
880 	case SCLK_I2C6:
881 	case SCLK_I2C7:
882 		rate = rk3399_i2c_get_clk(priv->cru, clk->id);
883 		break;
884 	case SCLK_SPI0...SCLK_SPI5:
885 		rate = rk3399_spi_get_clk(priv->cru, clk->id);
886 		break;
887 	case SCLK_UART0:
888 	case SCLK_UART2:
889 		return 24000000;
890 		break;
891 	case PCLK_HDMI_CTRL:
892 		break;
893 	case DCLK_VOP0:
894 	case DCLK_VOP1:
895 		break;
896 	case PCLK_EFUSE1024NS:
897 		break;
898 	default:
899 		return -ENOENT;
900 	}
901 
902 	return rate;
903 }
904 
905 static ulong rk3399_clk_set_rate(struct clk *clk, ulong rate)
906 {
907 	struct rk3399_clk_priv *priv = dev_get_priv(clk->dev);
908 	ulong ret = 0;
909 
910 	switch (clk->id) {
911 	case 0 ... 63:
912 		return 0;
913 	case HCLK_SDMMC:
914 	case SCLK_SDMMC:
915 	case SCLK_EMMC:
916 		ret = rk3399_mmc_set_clk(priv->cru, clk->id, rate);
917 		break;
918 	case SCLK_MAC:
919 		/* nothing to do, as this is an external clock */
920 		ret = rate;
921 		break;
922 	case SCLK_I2C1:
923 	case SCLK_I2C2:
924 	case SCLK_I2C3:
925 	case SCLK_I2C5:
926 	case SCLK_I2C6:
927 	case SCLK_I2C7:
928 		ret = rk3399_i2c_set_clk(priv->cru, clk->id, rate);
929 		break;
930 	case SCLK_SPI0...SCLK_SPI5:
931 		ret = rk3399_spi_set_clk(priv->cru, clk->id, rate);
932 		break;
933 	case PCLK_HDMI_CTRL:
934 	case PCLK_VIO_GRF:
935 		/* the PCLK gates for video are enabled by default */
936 		break;
937 	case DCLK_VOP0:
938 	case DCLK_VOP1:
939 		ret = rk3399_vop_set_clk(priv->cru, clk->id, rate);
940 		break;
941 	case SCLK_DDRCLK:
942 		ret = rk3399_ddr_set_clk(priv->cru, rate);
943 		break;
944 	case PCLK_EFUSE1024NS:
945 		break;
946 	default:
947 		return -ENOENT;
948 	}
949 
950 	return ret;
951 }
952 
953 static struct clk_ops rk3399_clk_ops = {
954 	.get_rate = rk3399_clk_get_rate,
955 	.set_rate = rk3399_clk_set_rate,
956 };
957 
958 static int rk3399_clk_probe(struct udevice *dev)
959 {
960 #ifdef CONFIG_SPL_BUILD
961 	struct rk3399_clk_priv *priv = dev_get_priv(dev);
962 
963 #if CONFIG_IS_ENABLED(OF_PLATDATA)
964 	struct rk3399_clk_plat *plat = dev_get_platdata(dev);
965 
966 	priv->cru = map_sysmem(plat->dtd.reg[1], plat->dtd.reg[3]);
967 #endif
968 	rkclk_init(priv->cru);
969 #endif
970 	return 0;
971 }
972 
973 static int rk3399_clk_ofdata_to_platdata(struct udevice *dev)
974 {
975 #if !CONFIG_IS_ENABLED(OF_PLATDATA)
976 	struct rk3399_clk_priv *priv = dev_get_priv(dev);
977 
978 	priv->cru = (struct rk3399_cru *)devfdt_get_addr(dev);
979 #endif
980 	return 0;
981 }
982 
983 static int rk3399_clk_bind(struct udevice *dev)
984 {
985 	int ret;
986 
987 	/* The reset driver does not have a device node, so bind it here */
988 	ret = device_bind_driver(gd->dm_root, "rk3399_sysreset", "reset", &dev);
989 	if (ret)
990 		printf("Warning: No RK3399 reset driver: ret=%d\n", ret);
991 
992 	return 0;
993 }
994 
995 static const struct udevice_id rk3399_clk_ids[] = {
996 	{ .compatible = "rockchip,rk3399-cru" },
997 	{ }
998 };
999 
1000 U_BOOT_DRIVER(clk_rk3399) = {
1001 	.name		= "rockchip_rk3399_cru",
1002 	.id		= UCLASS_CLK,
1003 	.of_match	= rk3399_clk_ids,
1004 	.priv_auto_alloc_size = sizeof(struct rk3399_clk_priv),
1005 	.ofdata_to_platdata = rk3399_clk_ofdata_to_platdata,
1006 	.ops		= &rk3399_clk_ops,
1007 	.bind		= rk3399_clk_bind,
1008 	.probe		= rk3399_clk_probe,
1009 #if CONFIG_IS_ENABLED(OF_PLATDATA)
1010 	.platdata_auto_alloc_size = sizeof(struct rk3399_clk_plat),
1011 #endif
1012 };
1013 
1014 static ulong rk3399_i2c_get_pmuclk(struct rk3399_pmucru *pmucru, ulong clk_id)
1015 {
1016 	u32 div, con;
1017 
1018 	switch (clk_id) {
1019 	case SCLK_I2C0_PMU:
1020 		con = readl(&pmucru->pmucru_clksel[2]);
1021 		div = I2C_CLK_DIV_VALUE(con, 0);
1022 		break;
1023 	case SCLK_I2C4_PMU:
1024 		con = readl(&pmucru->pmucru_clksel[3]);
1025 		div = I2C_CLK_DIV_VALUE(con, 4);
1026 		break;
1027 	case SCLK_I2C8_PMU:
1028 		con = readl(&pmucru->pmucru_clksel[2]);
1029 		div = I2C_CLK_DIV_VALUE(con, 8);
1030 		break;
1031 	default:
1032 		printf("do not support this i2c bus\n");
1033 		return -EINVAL;
1034 	}
1035 
1036 	return DIV_TO_RATE(PPLL_HZ, div);
1037 }
1038 
1039 static ulong rk3399_i2c_set_pmuclk(struct rk3399_pmucru *pmucru, ulong clk_id,
1040 				   uint hz)
1041 {
1042 	int src_clk_div;
1043 
1044 	src_clk_div = PPLL_HZ / hz;
1045 	assert(src_clk_div - 1 < 127);
1046 
1047 	switch (clk_id) {
1048 	case SCLK_I2C0_PMU:
1049 		rk_clrsetreg(&pmucru->pmucru_clksel[2], I2C_PMUCLK_REG_MASK(0),
1050 			     I2C_PMUCLK_REG_VALUE(0, src_clk_div));
1051 		break;
1052 	case SCLK_I2C4_PMU:
1053 		rk_clrsetreg(&pmucru->pmucru_clksel[3], I2C_PMUCLK_REG_MASK(4),
1054 			     I2C_PMUCLK_REG_VALUE(4, src_clk_div));
1055 		break;
1056 	case SCLK_I2C8_PMU:
1057 		rk_clrsetreg(&pmucru->pmucru_clksel[2], I2C_PMUCLK_REG_MASK(8),
1058 			     I2C_PMUCLK_REG_VALUE(8, src_clk_div));
1059 		break;
1060 	default:
1061 		printf("do not support this i2c bus\n");
1062 		return -EINVAL;
1063 	}
1064 
1065 	return DIV_TO_RATE(PPLL_HZ, src_clk_div);
1066 }
1067 
1068 static ulong rk3399_pwm_get_clk(struct rk3399_pmucru *pmucru)
1069 {
1070 	u32 div, con;
1071 
1072 	/* PWM closk rate is same as pclk_pmu */
1073 	con = readl(&pmucru->pmucru_clksel[0]);
1074 	div = con & PMU_PCLK_DIV_CON_MASK;
1075 
1076 	return DIV_TO_RATE(PPLL_HZ, div);
1077 }
1078 
1079 static ulong rk3399_pmuclk_get_rate(struct clk *clk)
1080 {
1081 	struct rk3399_pmuclk_priv *priv = dev_get_priv(clk->dev);
1082 	ulong rate = 0;
1083 
1084 	switch (clk->id) {
1085 	case PCLK_RKPWM_PMU:
1086 		rate = rk3399_pwm_get_clk(priv->pmucru);
1087 		break;
1088 	case SCLK_I2C0_PMU:
1089 	case SCLK_I2C4_PMU:
1090 	case SCLK_I2C8_PMU:
1091 		rate = rk3399_i2c_get_pmuclk(priv->pmucru, clk->id);
1092 		break;
1093 	default:
1094 		return -ENOENT;
1095 	}
1096 
1097 	return rate;
1098 }
1099 
1100 static ulong rk3399_pmuclk_set_rate(struct clk *clk, ulong rate)
1101 {
1102 	struct rk3399_pmuclk_priv *priv = dev_get_priv(clk->dev);
1103 	ulong ret = 0;
1104 
1105 	switch (clk->id) {
1106 	case SCLK_I2C0_PMU:
1107 	case SCLK_I2C4_PMU:
1108 	case SCLK_I2C8_PMU:
1109 		ret = rk3399_i2c_set_pmuclk(priv->pmucru, clk->id, rate);
1110 		break;
1111 	default:
1112 		return -ENOENT;
1113 	}
1114 
1115 	return ret;
1116 }
1117 
1118 static struct clk_ops rk3399_pmuclk_ops = {
1119 	.get_rate = rk3399_pmuclk_get_rate,
1120 	.set_rate = rk3399_pmuclk_set_rate,
1121 };
1122 
1123 #ifndef CONFIG_SPL_BUILD
1124 static void pmuclk_init(struct rk3399_pmucru *pmucru)
1125 {
1126 	u32 pclk_div;
1127 
1128 	/*  configure pmu pll(ppll) */
1129 	rkclk_set_pll(&pmucru->ppll_con[0], &ppll_init_cfg);
1130 
1131 	/*  configure pmu pclk */
1132 	pclk_div = PPLL_HZ / PMU_PCLK_HZ - 1;
1133 	rk_clrsetreg(&pmucru->pmucru_clksel[0],
1134 		     PMU_PCLK_DIV_CON_MASK,
1135 		     pclk_div << PMU_PCLK_DIV_CON_SHIFT);
1136 }
1137 #endif
1138 
1139 static int rk3399_pmuclk_probe(struct udevice *dev)
1140 {
1141 #if CONFIG_IS_ENABLED(OF_PLATDATA) || !defined(CONFIG_SPL_BUILD)
1142 	struct rk3399_pmuclk_priv *priv = dev_get_priv(dev);
1143 #endif
1144 
1145 #if CONFIG_IS_ENABLED(OF_PLATDATA)
1146 	struct rk3399_pmuclk_plat *plat = dev_get_platdata(dev);
1147 
1148 	priv->pmucru = map_sysmem(plat->dtd.reg[1], plat->dtd.reg[3]);
1149 #endif
1150 
1151 #ifndef CONFIG_SPL_BUILD
1152 	pmuclk_init(priv->pmucru);
1153 #endif
1154 	return 0;
1155 }
1156 
1157 static int rk3399_pmuclk_ofdata_to_platdata(struct udevice *dev)
1158 {
1159 #if !CONFIG_IS_ENABLED(OF_PLATDATA)
1160 	struct rk3399_pmuclk_priv *priv = dev_get_priv(dev);
1161 
1162 	priv->pmucru = (struct rk3399_pmucru *)devfdt_get_addr(dev);
1163 #endif
1164 	return 0;
1165 }
1166 
1167 static const struct udevice_id rk3399_pmuclk_ids[] = {
1168 	{ .compatible = "rockchip,rk3399-pmucru" },
1169 	{ }
1170 };
1171 
1172 U_BOOT_DRIVER(rockchip_rk3399_pmuclk) = {
1173 	.name		= "rockchip_rk3399_pmucru",
1174 	.id		= UCLASS_CLK,
1175 	.of_match	= rk3399_pmuclk_ids,
1176 	.priv_auto_alloc_size = sizeof(struct rk3399_pmuclk_priv),
1177 	.ofdata_to_platdata = rk3399_pmuclk_ofdata_to_platdata,
1178 	.ops		= &rk3399_pmuclk_ops,
1179 	.probe		= rk3399_pmuclk_probe,
1180 #if CONFIG_IS_ENABLED(OF_PLATDATA)
1181 	.platdata_auto_alloc_size = sizeof(struct rk3399_pmuclk_plat),
1182 #endif
1183 };
1184