1 /* 2 * (C) Copyright 2015 Google, Inc 3 * (C) 2017 Theobroma Systems Design und Consulting GmbH 4 * 5 * SPDX-License-Identifier: GPL-2.0 6 */ 7 8 #include <common.h> 9 #include <clk-uclass.h> 10 #include <dm.h> 11 #include <dt-structs.h> 12 #include <errno.h> 13 #include <mapmem.h> 14 #include <syscon.h> 15 #include <bitfield.h> 16 #include <asm/io.h> 17 #include <asm/arch/clock.h> 18 #include <asm/arch/cru_rk3399.h> 19 #include <asm/arch/hardware.h> 20 #include <dm/lists.h> 21 #include <dt-bindings/clock/rk3399-cru.h> 22 23 DECLARE_GLOBAL_DATA_PTR; 24 25 #if CONFIG_IS_ENABLED(OF_PLATDATA) 26 struct rk3399_clk_plat { 27 struct dtd_rockchip_rk3399_cru dtd; 28 }; 29 30 struct rk3399_pmuclk_plat { 31 struct dtd_rockchip_rk3399_pmucru dtd; 32 }; 33 #endif 34 35 struct pll_div { 36 u32 refdiv; 37 u32 fbdiv; 38 u32 postdiv1; 39 u32 postdiv2; 40 u32 frac; 41 }; 42 43 #define RATE_TO_DIV(input_rate, output_rate) \ 44 ((input_rate) / (output_rate) - 1); 45 #define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1)) 46 47 #define PLL_DIVISORS(hz, _refdiv, _postdiv1, _postdiv2) {\ 48 .refdiv = _refdiv,\ 49 .fbdiv = (u32)((u64)hz * _refdiv * _postdiv1 * _postdiv2 / OSC_HZ),\ 50 .postdiv1 = _postdiv1, .postdiv2 = _postdiv2}; 51 52 #if defined(CONFIG_SPL_BUILD) 53 static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2, 1); 54 static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2, 2); 55 #else 56 static const struct pll_div ppll_init_cfg = PLL_DIVISORS(PPLL_HZ, 2, 2, 1); 57 #endif 58 59 static const struct pll_div apll_l_1600_cfg = PLL_DIVISORS(1600*MHz, 3, 1, 1); 60 static const struct pll_div apll_l_600_cfg = PLL_DIVISORS(600*MHz, 1, 2, 1); 61 62 static const struct pll_div *apll_l_cfgs[] = { 63 [APLL_L_1600_MHZ] = &apll_l_1600_cfg, 64 [APLL_L_600_MHZ] = &apll_l_600_cfg, 65 }; 66 67 enum { 68 /* PLL_CON0 */ 69 PLL_FBDIV_MASK = 0xfff, 70 PLL_FBDIV_SHIFT = 0, 71 72 /* PLL_CON1 */ 73 PLL_POSTDIV2_SHIFT = 12, 74 PLL_POSTDIV2_MASK = 0x7 << PLL_POSTDIV2_SHIFT, 75 PLL_POSTDIV1_SHIFT = 8, 76 PLL_POSTDIV1_MASK = 0x7 << PLL_POSTDIV1_SHIFT, 77 PLL_REFDIV_MASK = 0x3f, 78 PLL_REFDIV_SHIFT = 0, 79 80 /* PLL_CON2 */ 81 PLL_LOCK_STATUS_SHIFT = 31, 82 PLL_LOCK_STATUS_MASK = 1 << PLL_LOCK_STATUS_SHIFT, 83 PLL_FRACDIV_MASK = 0xffffff, 84 PLL_FRACDIV_SHIFT = 0, 85 86 /* PLL_CON3 */ 87 PLL_MODE_SHIFT = 8, 88 PLL_MODE_MASK = 3 << PLL_MODE_SHIFT, 89 PLL_MODE_SLOW = 0, 90 PLL_MODE_NORM, 91 PLL_MODE_DEEP, 92 PLL_DSMPD_SHIFT = 3, 93 PLL_DSMPD_MASK = 1 << PLL_DSMPD_SHIFT, 94 PLL_INTEGER_MODE = 1, 95 96 /* PMUCRU_CLKSEL_CON0 */ 97 PMU_PCLK_DIV_CON_MASK = 0x1f, 98 PMU_PCLK_DIV_CON_SHIFT = 0, 99 100 /* PMUCRU_CLKSEL_CON1 */ 101 SPI3_PLL_SEL_SHIFT = 7, 102 SPI3_PLL_SEL_MASK = 1 << SPI3_PLL_SEL_SHIFT, 103 SPI3_PLL_SEL_24M = 0, 104 SPI3_PLL_SEL_PPLL = 1, 105 SPI3_DIV_CON_SHIFT = 0x0, 106 SPI3_DIV_CON_MASK = 0x7f, 107 108 /* PMUCRU_CLKSEL_CON2 */ 109 I2C_DIV_CON_MASK = 0x7f, 110 CLK_I2C8_DIV_CON_SHIFT = 8, 111 CLK_I2C0_DIV_CON_SHIFT = 0, 112 113 /* PMUCRU_CLKSEL_CON3 */ 114 CLK_I2C4_DIV_CON_SHIFT = 0, 115 116 /* CLKSEL_CON0 */ 117 ACLKM_CORE_L_DIV_CON_SHIFT = 8, 118 ACLKM_CORE_L_DIV_CON_MASK = 0x1f << ACLKM_CORE_L_DIV_CON_SHIFT, 119 CLK_CORE_L_PLL_SEL_SHIFT = 6, 120 CLK_CORE_L_PLL_SEL_MASK = 3 << CLK_CORE_L_PLL_SEL_SHIFT, 121 CLK_CORE_L_PLL_SEL_ALPLL = 0x0, 122 CLK_CORE_L_PLL_SEL_ABPLL = 0x1, 123 CLK_CORE_L_PLL_SEL_DPLL = 0x10, 124 CLK_CORE_L_PLL_SEL_GPLL = 0x11, 125 CLK_CORE_L_DIV_MASK = 0x1f, 126 CLK_CORE_L_DIV_SHIFT = 0, 127 128 /* CLKSEL_CON1 */ 129 PCLK_DBG_L_DIV_SHIFT = 0x8, 130 PCLK_DBG_L_DIV_MASK = 0x1f << PCLK_DBG_L_DIV_SHIFT, 131 ATCLK_CORE_L_DIV_SHIFT = 0, 132 ATCLK_CORE_L_DIV_MASK = 0x1f << ATCLK_CORE_L_DIV_SHIFT, 133 134 /* CLKSEL_CON14 */ 135 PCLK_PERIHP_DIV_CON_SHIFT = 12, 136 PCLK_PERIHP_DIV_CON_MASK = 0x7 << PCLK_PERIHP_DIV_CON_SHIFT, 137 HCLK_PERIHP_DIV_CON_SHIFT = 8, 138 HCLK_PERIHP_DIV_CON_MASK = 3 << HCLK_PERIHP_DIV_CON_SHIFT, 139 ACLK_PERIHP_PLL_SEL_SHIFT = 7, 140 ACLK_PERIHP_PLL_SEL_MASK = 1 << ACLK_PERIHP_PLL_SEL_SHIFT, 141 ACLK_PERIHP_PLL_SEL_CPLL = 0, 142 ACLK_PERIHP_PLL_SEL_GPLL = 1, 143 ACLK_PERIHP_DIV_CON_SHIFT = 0, 144 ACLK_PERIHP_DIV_CON_MASK = 0x1f, 145 146 /* CLKSEL_CON21 */ 147 ACLK_EMMC_PLL_SEL_SHIFT = 7, 148 ACLK_EMMC_PLL_SEL_MASK = 0x1 << ACLK_EMMC_PLL_SEL_SHIFT, 149 ACLK_EMMC_PLL_SEL_GPLL = 0x1, 150 ACLK_EMMC_DIV_CON_SHIFT = 0, 151 ACLK_EMMC_DIV_CON_MASK = 0x1f, 152 153 /* CLKSEL_CON22 */ 154 CLK_EMMC_PLL_SHIFT = 8, 155 CLK_EMMC_PLL_MASK = 0x7 << CLK_EMMC_PLL_SHIFT, 156 CLK_EMMC_PLL_SEL_GPLL = 0x1, 157 CLK_EMMC_PLL_SEL_24M = 0x5, 158 CLK_EMMC_DIV_CON_SHIFT = 0, 159 CLK_EMMC_DIV_CON_MASK = 0x7f << CLK_EMMC_DIV_CON_SHIFT, 160 161 /* CLKSEL_CON23 */ 162 PCLK_PERILP0_DIV_CON_SHIFT = 12, 163 PCLK_PERILP0_DIV_CON_MASK = 0x7 << PCLK_PERILP0_DIV_CON_SHIFT, 164 HCLK_PERILP0_DIV_CON_SHIFT = 8, 165 HCLK_PERILP0_DIV_CON_MASK = 3 << HCLK_PERILP0_DIV_CON_SHIFT, 166 ACLK_PERILP0_PLL_SEL_SHIFT = 7, 167 ACLK_PERILP0_PLL_SEL_MASK = 1 << ACLK_PERILP0_PLL_SEL_SHIFT, 168 ACLK_PERILP0_PLL_SEL_CPLL = 0, 169 ACLK_PERILP0_PLL_SEL_GPLL = 1, 170 ACLK_PERILP0_DIV_CON_SHIFT = 0, 171 ACLK_PERILP0_DIV_CON_MASK = 0x1f, 172 173 /* CLKSEL_CON25 */ 174 PCLK_PERILP1_DIV_CON_SHIFT = 8, 175 PCLK_PERILP1_DIV_CON_MASK = 0x7 << PCLK_PERILP1_DIV_CON_SHIFT, 176 HCLK_PERILP1_PLL_SEL_SHIFT = 7, 177 HCLK_PERILP1_PLL_SEL_MASK = 1 << HCLK_PERILP1_PLL_SEL_SHIFT, 178 HCLK_PERILP1_PLL_SEL_CPLL = 0, 179 HCLK_PERILP1_PLL_SEL_GPLL = 1, 180 HCLK_PERILP1_DIV_CON_SHIFT = 0, 181 HCLK_PERILP1_DIV_CON_MASK = 0x1f, 182 183 /* CLKSEL_CON26 */ 184 CLK_SARADC_DIV_CON_SHIFT = 8, 185 CLK_SARADC_DIV_CON_MASK = GENMASK(15, 8), 186 CLK_SARADC_DIV_CON_WIDTH = 8, 187 188 /* CLKSEL_CON27 */ 189 CLK_TSADC_SEL_X24M = 0x0, 190 CLK_TSADC_SEL_SHIFT = 15, 191 CLK_TSADC_SEL_MASK = 1 << CLK_TSADC_SEL_SHIFT, 192 CLK_TSADC_DIV_CON_SHIFT = 0, 193 CLK_TSADC_DIV_CON_MASK = 0x3ff, 194 195 /* CLKSEL_CON47 & CLKSEL_CON48 */ 196 ACLK_VOP_PLL_SEL_SHIFT = 6, 197 ACLK_VOP_PLL_SEL_MASK = 0x3 << ACLK_VOP_PLL_SEL_SHIFT, 198 ACLK_VOP_PLL_SEL_CPLL = 0x1, 199 ACLK_VOP_DIV_CON_SHIFT = 0, 200 ACLK_VOP_DIV_CON_MASK = 0x1f << ACLK_VOP_DIV_CON_SHIFT, 201 202 /* CLKSEL_CON49 & CLKSEL_CON50 */ 203 DCLK_VOP_DCLK_SEL_SHIFT = 11, 204 DCLK_VOP_DCLK_SEL_MASK = 1 << DCLK_VOP_DCLK_SEL_SHIFT, 205 DCLK_VOP_DCLK_SEL_DIVOUT = 0, 206 DCLK_VOP_PLL_SEL_SHIFT = 8, 207 DCLK_VOP_PLL_SEL_MASK = 3 << DCLK_VOP_PLL_SEL_SHIFT, 208 DCLK_VOP_PLL_SEL_VPLL = 0, 209 DCLK_VOP_DIV_CON_MASK = 0xff, 210 DCLK_VOP_DIV_CON_SHIFT = 0, 211 212 /* CLKSEL_CON58 */ 213 CLK_SPI_PLL_SEL_WIDTH = 1, 214 CLK_SPI_PLL_SEL_MASK = ((1 < CLK_SPI_PLL_SEL_WIDTH) - 1), 215 CLK_SPI_PLL_SEL_CPLL = 0, 216 CLK_SPI_PLL_SEL_GPLL = 1, 217 CLK_SPI_PLL_DIV_CON_WIDTH = 7, 218 CLK_SPI_PLL_DIV_CON_MASK = ((1 << CLK_SPI_PLL_DIV_CON_WIDTH) - 1), 219 220 CLK_SPI5_PLL_DIV_CON_SHIFT = 8, 221 CLK_SPI5_PLL_SEL_SHIFT = 15, 222 223 /* CLKSEL_CON59 */ 224 CLK_SPI1_PLL_SEL_SHIFT = 15, 225 CLK_SPI1_PLL_DIV_CON_SHIFT = 8, 226 CLK_SPI0_PLL_SEL_SHIFT = 7, 227 CLK_SPI0_PLL_DIV_CON_SHIFT = 0, 228 229 /* CLKSEL_CON60 */ 230 CLK_SPI4_PLL_SEL_SHIFT = 15, 231 CLK_SPI4_PLL_DIV_CON_SHIFT = 8, 232 CLK_SPI2_PLL_SEL_SHIFT = 7, 233 CLK_SPI2_PLL_DIV_CON_SHIFT = 0, 234 235 /* CLKSEL_CON61 */ 236 CLK_I2C_PLL_SEL_MASK = 1, 237 CLK_I2C_PLL_SEL_CPLL = 0, 238 CLK_I2C_PLL_SEL_GPLL = 1, 239 CLK_I2C5_PLL_SEL_SHIFT = 15, 240 CLK_I2C5_DIV_CON_SHIFT = 8, 241 CLK_I2C1_PLL_SEL_SHIFT = 7, 242 CLK_I2C1_DIV_CON_SHIFT = 0, 243 244 /* CLKSEL_CON62 */ 245 CLK_I2C6_PLL_SEL_SHIFT = 15, 246 CLK_I2C6_DIV_CON_SHIFT = 8, 247 CLK_I2C2_PLL_SEL_SHIFT = 7, 248 CLK_I2C2_DIV_CON_SHIFT = 0, 249 250 /* CLKSEL_CON63 */ 251 CLK_I2C7_PLL_SEL_SHIFT = 15, 252 CLK_I2C7_DIV_CON_SHIFT = 8, 253 CLK_I2C3_PLL_SEL_SHIFT = 7, 254 CLK_I2C3_DIV_CON_SHIFT = 0, 255 256 /* CRU_SOFTRST_CON4 */ 257 RESETN_DDR0_REQ_SHIFT = 8, 258 RESETN_DDR0_REQ_MASK = 1 << RESETN_DDR0_REQ_SHIFT, 259 RESETN_DDRPHY0_REQ_SHIFT = 9, 260 RESETN_DDRPHY0_REQ_MASK = 1 << RESETN_DDRPHY0_REQ_SHIFT, 261 RESETN_DDR1_REQ_SHIFT = 12, 262 RESETN_DDR1_REQ_MASK = 1 << RESETN_DDR1_REQ_SHIFT, 263 RESETN_DDRPHY1_REQ_SHIFT = 13, 264 RESETN_DDRPHY1_REQ_MASK = 1 << RESETN_DDRPHY1_REQ_SHIFT, 265 }; 266 267 #define VCO_MAX_KHZ (3200 * (MHz / KHz)) 268 #define VCO_MIN_KHZ (800 * (MHz / KHz)) 269 #define OUTPUT_MAX_KHZ (3200 * (MHz / KHz)) 270 #define OUTPUT_MIN_KHZ (16 * (MHz / KHz)) 271 272 /* 273 * the div restructions of pll in integer mode, these are defined in 274 * * CRU_*PLL_CON0 or PMUCRU_*PLL_CON0 275 */ 276 #define PLL_DIV_MIN 16 277 #define PLL_DIV_MAX 3200 278 279 /* 280 * How to calculate the PLL(from TRM V0.3 Part 1 Page 63): 281 * Formulas also embedded within the Fractional PLL Verilog model: 282 * If DSMPD = 1 (DSM is disabled, "integer mode") 283 * FOUTVCO = FREF / REFDIV * FBDIV 284 * FOUTPOSTDIV = FOUTVCO / POSTDIV1 / POSTDIV2 285 * Where: 286 * FOUTVCO = Fractional PLL non-divided output frequency 287 * FOUTPOSTDIV = Fractional PLL divided output frequency 288 * (output of second post divider) 289 * FREF = Fractional PLL input reference frequency, (the OSC_HZ 24MHz input) 290 * REFDIV = Fractional PLL input reference clock divider 291 * FBDIV = Integer value programmed into feedback divide 292 * 293 */ 294 static void rkclk_set_pll(u32 *pll_con, const struct pll_div *div) 295 { 296 /* All 8 PLLs have same VCO and output frequency range restrictions. */ 297 u32 vco_khz = OSC_HZ / 1000 * div->fbdiv / div->refdiv; 298 u32 output_khz = vco_khz / div->postdiv1 / div->postdiv2; 299 300 debug("PLL at %p: fbdiv=%d, refdiv=%d, postdiv1=%d, " 301 "postdiv2=%d, vco=%u khz, output=%u khz\n", 302 pll_con, div->fbdiv, div->refdiv, div->postdiv1, 303 div->postdiv2, vco_khz, output_khz); 304 assert(vco_khz >= VCO_MIN_KHZ && vco_khz <= VCO_MAX_KHZ && 305 output_khz >= OUTPUT_MIN_KHZ && output_khz <= OUTPUT_MAX_KHZ && 306 div->fbdiv >= PLL_DIV_MIN && div->fbdiv <= PLL_DIV_MAX); 307 308 /* 309 * When power on or changing PLL setting, 310 * we must force PLL into slow mode to ensure output stable clock. 311 */ 312 rk_clrsetreg(&pll_con[3], PLL_MODE_MASK, 313 PLL_MODE_SLOW << PLL_MODE_SHIFT); 314 315 /* use integer mode */ 316 rk_clrsetreg(&pll_con[3], PLL_DSMPD_MASK, 317 PLL_INTEGER_MODE << PLL_DSMPD_SHIFT); 318 319 rk_clrsetreg(&pll_con[0], PLL_FBDIV_MASK, 320 div->fbdiv << PLL_FBDIV_SHIFT); 321 rk_clrsetreg(&pll_con[1], 322 PLL_POSTDIV2_MASK | PLL_POSTDIV1_MASK | 323 PLL_REFDIV_MASK | PLL_REFDIV_SHIFT, 324 (div->postdiv2 << PLL_POSTDIV2_SHIFT) | 325 (div->postdiv1 << PLL_POSTDIV1_SHIFT) | 326 (div->refdiv << PLL_REFDIV_SHIFT)); 327 328 /* waiting for pll lock */ 329 while (!(readl(&pll_con[2]) & (1 << PLL_LOCK_STATUS_SHIFT))) 330 udelay(1); 331 332 /* pll enter normal mode */ 333 rk_clrsetreg(&pll_con[3], PLL_MODE_MASK, 334 PLL_MODE_NORM << PLL_MODE_SHIFT); 335 } 336 337 static int pll_para_config(u32 freq_hz, struct pll_div *div) 338 { 339 u32 ref_khz = OSC_HZ / KHz, refdiv, fbdiv = 0; 340 u32 postdiv1, postdiv2 = 1; 341 u32 fref_khz; 342 u32 diff_khz, best_diff_khz; 343 const u32 max_refdiv = 63, max_fbdiv = 3200, min_fbdiv = 16; 344 const u32 max_postdiv1 = 7, max_postdiv2 = 7; 345 u32 vco_khz; 346 u32 freq_khz = freq_hz / KHz; 347 348 if (!freq_hz) { 349 printf("%s: the frequency can't be 0 Hz\n", __func__); 350 return -1; 351 } 352 353 postdiv1 = DIV_ROUND_UP(VCO_MIN_KHZ, freq_khz); 354 if (postdiv1 > max_postdiv1) { 355 postdiv2 = DIV_ROUND_UP(postdiv1, max_postdiv1); 356 postdiv1 = DIV_ROUND_UP(postdiv1, postdiv2); 357 } 358 359 vco_khz = freq_khz * postdiv1 * postdiv2; 360 361 if (vco_khz < VCO_MIN_KHZ || vco_khz > VCO_MAX_KHZ || 362 postdiv2 > max_postdiv2) { 363 printf("%s: Cannot find out a supported VCO" 364 " for Frequency (%uHz).\n", __func__, freq_hz); 365 return -1; 366 } 367 368 div->postdiv1 = postdiv1; 369 div->postdiv2 = postdiv2; 370 371 best_diff_khz = vco_khz; 372 for (refdiv = 1; refdiv < max_refdiv && best_diff_khz; refdiv++) { 373 fref_khz = ref_khz / refdiv; 374 375 fbdiv = vco_khz / fref_khz; 376 if ((fbdiv >= max_fbdiv) || (fbdiv <= min_fbdiv)) 377 continue; 378 diff_khz = vco_khz - fbdiv * fref_khz; 379 if (fbdiv + 1 < max_fbdiv && diff_khz > fref_khz / 2) { 380 fbdiv++; 381 diff_khz = fref_khz - diff_khz; 382 } 383 384 if (diff_khz >= best_diff_khz) 385 continue; 386 387 best_diff_khz = diff_khz; 388 div->refdiv = refdiv; 389 div->fbdiv = fbdiv; 390 } 391 392 if (best_diff_khz > 4 * (MHz/KHz)) { 393 printf("%s: Failed to match output frequency %u, " 394 "difference is %u Hz,exceed 4MHZ\n", __func__, freq_hz, 395 best_diff_khz * KHz); 396 return -1; 397 } 398 return 0; 399 } 400 401 void rk3399_configure_cpu(struct rk3399_cru *cru, 402 enum apll_l_frequencies apll_l_freq) 403 { 404 u32 aclkm_div; 405 u32 pclk_dbg_div; 406 u32 atclk_div; 407 408 rkclk_set_pll(&cru->apll_l_con[0], apll_l_cfgs[apll_l_freq]); 409 410 aclkm_div = APLL_HZ / ACLKM_CORE_HZ - 1; 411 assert((aclkm_div + 1) * ACLKM_CORE_HZ == APLL_HZ && 412 aclkm_div < 0x1f); 413 414 pclk_dbg_div = APLL_HZ / PCLK_DBG_HZ - 1; 415 assert((pclk_dbg_div + 1) * PCLK_DBG_HZ == APLL_HZ && 416 pclk_dbg_div < 0x1f); 417 418 atclk_div = APLL_HZ / ATCLK_CORE_HZ - 1; 419 assert((atclk_div + 1) * ATCLK_CORE_HZ == APLL_HZ && 420 atclk_div < 0x1f); 421 422 rk_clrsetreg(&cru->clksel_con[0], 423 ACLKM_CORE_L_DIV_CON_MASK | CLK_CORE_L_PLL_SEL_MASK | 424 CLK_CORE_L_DIV_MASK, 425 aclkm_div << ACLKM_CORE_L_DIV_CON_SHIFT | 426 CLK_CORE_L_PLL_SEL_ALPLL << CLK_CORE_L_PLL_SEL_SHIFT | 427 0 << CLK_CORE_L_DIV_SHIFT); 428 429 rk_clrsetreg(&cru->clksel_con[1], 430 PCLK_DBG_L_DIV_MASK | ATCLK_CORE_L_DIV_MASK, 431 pclk_dbg_div << PCLK_DBG_L_DIV_SHIFT | 432 atclk_div << ATCLK_CORE_L_DIV_SHIFT); 433 } 434 #define I2C_CLK_REG_MASK(bus) \ 435 (I2C_DIV_CON_MASK << \ 436 CLK_I2C ##bus## _DIV_CON_SHIFT | \ 437 CLK_I2C_PLL_SEL_MASK << \ 438 CLK_I2C ##bus## _PLL_SEL_SHIFT) 439 440 #define I2C_CLK_REG_VALUE(bus, clk_div) \ 441 ((clk_div - 1) << \ 442 CLK_I2C ##bus## _DIV_CON_SHIFT | \ 443 CLK_I2C_PLL_SEL_GPLL << \ 444 CLK_I2C ##bus## _PLL_SEL_SHIFT) 445 446 #define I2C_CLK_DIV_VALUE(con, bus) \ 447 (con >> CLK_I2C ##bus## _DIV_CON_SHIFT) & \ 448 I2C_DIV_CON_MASK; 449 450 #define I2C_PMUCLK_REG_MASK(bus) \ 451 (I2C_DIV_CON_MASK << \ 452 CLK_I2C ##bus## _DIV_CON_SHIFT) 453 454 #define I2C_PMUCLK_REG_VALUE(bus, clk_div) \ 455 ((clk_div - 1) << \ 456 CLK_I2C ##bus## _DIV_CON_SHIFT) 457 458 static ulong rk3399_i2c_get_clk(struct rk3399_cru *cru, ulong clk_id) 459 { 460 u32 div, con; 461 462 switch (clk_id) { 463 case SCLK_I2C1: 464 con = readl(&cru->clksel_con[61]); 465 div = I2C_CLK_DIV_VALUE(con, 1); 466 break; 467 case SCLK_I2C2: 468 con = readl(&cru->clksel_con[62]); 469 div = I2C_CLK_DIV_VALUE(con, 2); 470 break; 471 case SCLK_I2C3: 472 con = readl(&cru->clksel_con[63]); 473 div = I2C_CLK_DIV_VALUE(con, 3); 474 break; 475 case SCLK_I2C5: 476 con = readl(&cru->clksel_con[61]); 477 div = I2C_CLK_DIV_VALUE(con, 5); 478 break; 479 case SCLK_I2C6: 480 con = readl(&cru->clksel_con[62]); 481 div = I2C_CLK_DIV_VALUE(con, 6); 482 break; 483 case SCLK_I2C7: 484 con = readl(&cru->clksel_con[63]); 485 div = I2C_CLK_DIV_VALUE(con, 7); 486 break; 487 default: 488 printf("do not support this i2c bus\n"); 489 return -EINVAL; 490 } 491 492 return DIV_TO_RATE(GPLL_HZ, div); 493 } 494 495 static ulong rk3399_i2c_set_clk(struct rk3399_cru *cru, ulong clk_id, uint hz) 496 { 497 int src_clk_div; 498 499 /* i2c0,4,8 src clock from ppll, i2c1,2,3,5,6,7 src clock from gpll*/ 500 src_clk_div = GPLL_HZ / hz; 501 assert(src_clk_div - 1 < 127); 502 503 switch (clk_id) { 504 case SCLK_I2C1: 505 rk_clrsetreg(&cru->clksel_con[61], I2C_CLK_REG_MASK(1), 506 I2C_CLK_REG_VALUE(1, src_clk_div)); 507 break; 508 case SCLK_I2C2: 509 rk_clrsetreg(&cru->clksel_con[62], I2C_CLK_REG_MASK(2), 510 I2C_CLK_REG_VALUE(2, src_clk_div)); 511 break; 512 case SCLK_I2C3: 513 rk_clrsetreg(&cru->clksel_con[63], I2C_CLK_REG_MASK(3), 514 I2C_CLK_REG_VALUE(3, src_clk_div)); 515 break; 516 case SCLK_I2C5: 517 rk_clrsetreg(&cru->clksel_con[61], I2C_CLK_REG_MASK(5), 518 I2C_CLK_REG_VALUE(5, src_clk_div)); 519 break; 520 case SCLK_I2C6: 521 rk_clrsetreg(&cru->clksel_con[62], I2C_CLK_REG_MASK(6), 522 I2C_CLK_REG_VALUE(6, src_clk_div)); 523 break; 524 case SCLK_I2C7: 525 rk_clrsetreg(&cru->clksel_con[63], I2C_CLK_REG_MASK(7), 526 I2C_CLK_REG_VALUE(7, src_clk_div)); 527 break; 528 default: 529 printf("do not support this i2c bus\n"); 530 return -EINVAL; 531 } 532 533 return rk3399_i2c_get_clk(cru, clk_id); 534 } 535 536 /* 537 * RK3399 SPI clocks have a common divider-width (7 bits) and a single bit 538 * to select either CPLL or GPLL as the clock-parent. The location within 539 * the enclosing CLKSEL_CON (i.e. div_shift and sel_shift) are variable. 540 */ 541 542 struct spi_clkreg { 543 uint8_t reg; /* CLKSEL_CON[reg] register in CRU */ 544 uint8_t div_shift; 545 uint8_t sel_shift; 546 }; 547 548 /* 549 * The entries are numbered relative to their offset from SCLK_SPI0. 550 * 551 * Note that SCLK_SPI3 (which is configured via PMUCRU and requires different 552 * logic is not supported). 553 */ 554 static const struct spi_clkreg spi_clkregs[] = { 555 [0] = { .reg = 59, 556 .div_shift = CLK_SPI0_PLL_DIV_CON_SHIFT, 557 .sel_shift = CLK_SPI0_PLL_SEL_SHIFT, }, 558 [1] = { .reg = 59, 559 .div_shift = CLK_SPI1_PLL_DIV_CON_SHIFT, 560 .sel_shift = CLK_SPI1_PLL_SEL_SHIFT, }, 561 [2] = { .reg = 60, 562 .div_shift = CLK_SPI2_PLL_DIV_CON_SHIFT, 563 .sel_shift = CLK_SPI2_PLL_SEL_SHIFT, }, 564 [3] = { .reg = 60, 565 .div_shift = CLK_SPI4_PLL_DIV_CON_SHIFT, 566 .sel_shift = CLK_SPI4_PLL_SEL_SHIFT, }, 567 [4] = { .reg = 58, 568 .div_shift = CLK_SPI5_PLL_DIV_CON_SHIFT, 569 .sel_shift = CLK_SPI5_PLL_SEL_SHIFT, }, 570 }; 571 572 static ulong rk3399_spi_get_clk(struct rk3399_cru *cru, ulong clk_id) 573 { 574 const struct spi_clkreg *spiclk = NULL; 575 u32 div, val; 576 577 switch (clk_id) { 578 case SCLK_SPI0 ... SCLK_SPI5: 579 spiclk = &spi_clkregs[clk_id - SCLK_SPI0]; 580 break; 581 582 default: 583 pr_err("%s: SPI clk-id %ld not supported\n", __func__, clk_id); 584 return -EINVAL; 585 } 586 587 val = readl(&cru->clksel_con[spiclk->reg]); 588 div = bitfield_extract(val, spiclk->div_shift, 589 CLK_SPI_PLL_DIV_CON_WIDTH); 590 591 return DIV_TO_RATE(GPLL_HZ, div); 592 } 593 594 static ulong rk3399_spi_set_clk(struct rk3399_cru *cru, ulong clk_id, uint hz) 595 { 596 const struct spi_clkreg *spiclk = NULL; 597 int src_clk_div; 598 599 src_clk_div = DIV_ROUND_UP(GPLL_HZ, hz) - 1; 600 assert(src_clk_div < 128); 601 602 switch (clk_id) { 603 case SCLK_SPI1 ... SCLK_SPI5: 604 spiclk = &spi_clkregs[clk_id - SCLK_SPI0]; 605 break; 606 607 default: 608 pr_err("%s: SPI clk-id %ld not supported\n", __func__, clk_id); 609 return -EINVAL; 610 } 611 612 rk_clrsetreg(&cru->clksel_con[spiclk->reg], 613 ((CLK_SPI_PLL_DIV_CON_MASK << spiclk->div_shift) | 614 (CLK_SPI_PLL_SEL_GPLL << spiclk->sel_shift)), 615 ((src_clk_div << spiclk->div_shift) | 616 (CLK_SPI_PLL_SEL_GPLL << spiclk->sel_shift))); 617 618 return rk3399_spi_get_clk(cru, clk_id); 619 } 620 621 static ulong rk3399_vop_set_clk(struct rk3399_cru *cru, ulong clk_id, u32 hz) 622 { 623 struct pll_div vpll_config = {0}; 624 int aclk_vop = 198*MHz; 625 void *aclkreg_addr, *dclkreg_addr; 626 u32 div; 627 628 switch (clk_id) { 629 case DCLK_VOP0: 630 aclkreg_addr = &cru->clksel_con[47]; 631 dclkreg_addr = &cru->clksel_con[49]; 632 break; 633 case DCLK_VOP1: 634 aclkreg_addr = &cru->clksel_con[48]; 635 dclkreg_addr = &cru->clksel_con[50]; 636 break; 637 default: 638 return -EINVAL; 639 } 640 /* vop aclk source clk: cpll */ 641 div = CPLL_HZ / aclk_vop; 642 assert(div - 1 < 32); 643 644 rk_clrsetreg(aclkreg_addr, 645 ACLK_VOP_PLL_SEL_MASK | ACLK_VOP_DIV_CON_MASK, 646 ACLK_VOP_PLL_SEL_CPLL << ACLK_VOP_PLL_SEL_SHIFT | 647 (div - 1) << ACLK_VOP_DIV_CON_SHIFT); 648 649 /* vop dclk source from vpll, and equals to vpll(means div == 1) */ 650 if (pll_para_config(hz, &vpll_config)) 651 return -1; 652 653 rkclk_set_pll(&cru->vpll_con[0], &vpll_config); 654 655 rk_clrsetreg(dclkreg_addr, 656 DCLK_VOP_DCLK_SEL_MASK | DCLK_VOP_PLL_SEL_MASK| 657 DCLK_VOP_DIV_CON_MASK, 658 DCLK_VOP_DCLK_SEL_DIVOUT << DCLK_VOP_DCLK_SEL_SHIFT | 659 DCLK_VOP_PLL_SEL_VPLL << DCLK_VOP_PLL_SEL_SHIFT | 660 (1 - 1) << DCLK_VOP_DIV_CON_SHIFT); 661 662 return hz; 663 } 664 665 static ulong rk3399_mmc_get_clk(struct rk3399_cru *cru, uint clk_id) 666 { 667 u32 div, con; 668 669 switch (clk_id) { 670 case HCLK_SDMMC: 671 case SCLK_SDMMC: 672 con = readl(&cru->clksel_con[16]); 673 /* dwmmc controller have internal div 2 */ 674 div = 2; 675 break; 676 case SCLK_EMMC: 677 con = readl(&cru->clksel_con[21]); 678 div = 1; 679 break; 680 default: 681 return -EINVAL; 682 } 683 684 div *= (con & CLK_EMMC_DIV_CON_MASK) >> CLK_EMMC_DIV_CON_SHIFT; 685 if ((con & CLK_EMMC_PLL_MASK) >> CLK_EMMC_PLL_SHIFT 686 == CLK_EMMC_PLL_SEL_24M) 687 return DIV_TO_RATE(OSC_HZ, div); 688 else 689 return DIV_TO_RATE(GPLL_HZ, div); 690 } 691 692 static ulong rk3399_mmc_set_clk(struct rk3399_cru *cru, 693 ulong clk_id, ulong set_rate) 694 { 695 int src_clk_div; 696 int aclk_emmc = 198*MHz; 697 698 switch (clk_id) { 699 case HCLK_SDMMC: 700 case SCLK_SDMMC: 701 /* Select clk_sdmmc source from GPLL by default */ 702 /* mmc clock defaulg div 2 internal, provide double in cru */ 703 src_clk_div = DIV_ROUND_UP(GPLL_HZ / 2, set_rate); 704 705 if (src_clk_div > 128) { 706 /* use 24MHz source for 400KHz clock */ 707 src_clk_div = DIV_ROUND_UP(OSC_HZ / 2, set_rate); 708 assert(src_clk_div - 1 < 128); 709 rk_clrsetreg(&cru->clksel_con[16], 710 CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK, 711 CLK_EMMC_PLL_SEL_24M << CLK_EMMC_PLL_SHIFT | 712 (src_clk_div - 1) << CLK_EMMC_DIV_CON_SHIFT); 713 } else { 714 rk_clrsetreg(&cru->clksel_con[16], 715 CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK, 716 CLK_EMMC_PLL_SEL_GPLL << CLK_EMMC_PLL_SHIFT | 717 (src_clk_div - 1) << CLK_EMMC_DIV_CON_SHIFT); 718 } 719 break; 720 case SCLK_EMMC: 721 /* Select aclk_emmc source from GPLL */ 722 src_clk_div = DIV_ROUND_UP(GPLL_HZ , aclk_emmc); 723 assert(src_clk_div - 1 < 32); 724 725 rk_clrsetreg(&cru->clksel_con[21], 726 ACLK_EMMC_PLL_SEL_MASK | ACLK_EMMC_DIV_CON_MASK, 727 ACLK_EMMC_PLL_SEL_GPLL << ACLK_EMMC_PLL_SEL_SHIFT | 728 (src_clk_div - 1) << ACLK_EMMC_DIV_CON_SHIFT); 729 730 /* Select clk_emmc source from GPLL too */ 731 src_clk_div = DIV_ROUND_UP(GPLL_HZ, set_rate); 732 assert(src_clk_div - 1 < 128); 733 734 rk_clrsetreg(&cru->clksel_con[22], 735 CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK, 736 CLK_EMMC_PLL_SEL_GPLL << CLK_EMMC_PLL_SHIFT | 737 (src_clk_div - 1) << CLK_EMMC_DIV_CON_SHIFT); 738 break; 739 default: 740 return -EINVAL; 741 } 742 return rk3399_mmc_get_clk(cru, clk_id); 743 } 744 745 static ulong rk3399_gmac_set_clk(struct rk3399_cru *cru, ulong rate) 746 { 747 ulong ret; 748 749 /* 750 * The RGMII CLK can be derived either from an external "clkin" 751 * or can be generated from internally by a divider from SCLK_MAC. 752 */ 753 if (readl(&cru->clksel_con[19]) & BIT(4)) { 754 /* An external clock will always generate the right rate... */ 755 ret = rate; 756 } else { 757 /* 758 * No platform uses an internal clock to date. 759 * Implement this once it becomes necessary and print an error 760 * if someone tries to use it (while it remains unimplemented). 761 */ 762 pr_err("%s: internal clock is UNIMPLEMENTED\n", __func__); 763 ret = 0; 764 } 765 766 return ret; 767 } 768 769 #define PMUSGRF_DDR_RGN_CON16 0xff330040 770 static ulong rk3399_ddr_set_clk(struct rk3399_cru *cru, 771 ulong set_rate) 772 { 773 struct pll_div dpll_cfg; 774 775 /* IC ECO bug, need to set this register */ 776 writel(0xc000c000, PMUSGRF_DDR_RGN_CON16); 777 778 /* clk_ddrc == DPLL = 24MHz / refdiv * fbdiv / postdiv1 / postdiv2 */ 779 switch (set_rate) { 780 case 200*MHz: 781 dpll_cfg = (struct pll_div) 782 {.refdiv = 1, .fbdiv = 50, .postdiv1 = 6, .postdiv2 = 1}; 783 break; 784 case 300*MHz: 785 dpll_cfg = (struct pll_div) 786 {.refdiv = 2, .fbdiv = 100, .postdiv1 = 4, .postdiv2 = 1}; 787 break; 788 case 666*MHz: 789 dpll_cfg = (struct pll_div) 790 {.refdiv = 2, .fbdiv = 111, .postdiv1 = 2, .postdiv2 = 1}; 791 break; 792 case 800*MHz: 793 dpll_cfg = (struct pll_div) 794 {.refdiv = 1, .fbdiv = 100, .postdiv1 = 3, .postdiv2 = 1}; 795 break; 796 case 933*MHz: 797 dpll_cfg = (struct pll_div) 798 {.refdiv = 1, .fbdiv = 116, .postdiv1 = 3, .postdiv2 = 1}; 799 break; 800 default: 801 pr_err("Unsupported SDRAM frequency!,%ld\n", set_rate); 802 } 803 rkclk_set_pll(&cru->dpll_con[0], &dpll_cfg); 804 805 return set_rate; 806 } 807 808 static ulong rk3399_saradc_get_clk(struct rk3399_cru *cru) 809 { 810 u32 div, val; 811 812 val = readl(&cru->clksel_con[26]); 813 div = bitfield_extract(val, CLK_SARADC_DIV_CON_SHIFT, 814 CLK_SARADC_DIV_CON_WIDTH); 815 816 return DIV_TO_RATE(OSC_HZ, div); 817 } 818 819 static ulong rk3399_saradc_set_clk(struct rk3399_cru *cru, uint hz) 820 { 821 int src_clk_div; 822 823 src_clk_div = DIV_ROUND_UP(OSC_HZ, hz) - 1; 824 assert(src_clk_div < 128); 825 826 rk_clrsetreg(&cru->clksel_con[26], 827 CLK_SARADC_DIV_CON_MASK, 828 src_clk_div << CLK_SARADC_DIV_CON_SHIFT); 829 830 return rk3399_saradc_get_clk(cru); 831 } 832 833 static ulong rk3399_clk_get_rate(struct clk *clk) 834 { 835 struct rk3399_clk_priv *priv = dev_get_priv(clk->dev); 836 ulong rate = 0; 837 838 switch (clk->id) { 839 case 0 ... 63: 840 return 0; 841 case HCLK_SDMMC: 842 case SCLK_SDMMC: 843 case SCLK_EMMC: 844 rate = rk3399_mmc_get_clk(priv->cru, clk->id); 845 break; 846 case SCLK_I2C1: 847 case SCLK_I2C2: 848 case SCLK_I2C3: 849 case SCLK_I2C5: 850 case SCLK_I2C6: 851 case SCLK_I2C7: 852 rate = rk3399_i2c_get_clk(priv->cru, clk->id); 853 break; 854 case SCLK_SPI0...SCLK_SPI5: 855 rate = rk3399_spi_get_clk(priv->cru, clk->id); 856 break; 857 case SCLK_UART0: 858 case SCLK_UART2: 859 return 24000000; 860 break; 861 case PCLK_HDMI_CTRL: 862 break; 863 case DCLK_VOP0: 864 case DCLK_VOP1: 865 break; 866 case PCLK_EFUSE1024NS: 867 break; 868 case SCLK_SARADC: 869 rate = rk3399_saradc_get_clk(priv->cru); 870 break; 871 default: 872 return -ENOENT; 873 } 874 875 return rate; 876 } 877 878 static ulong rk3399_clk_set_rate(struct clk *clk, ulong rate) 879 { 880 struct rk3399_clk_priv *priv = dev_get_priv(clk->dev); 881 ulong ret = 0; 882 883 switch (clk->id) { 884 case 0 ... 63: 885 return 0; 886 887 case ACLK_PERIHP: 888 case HCLK_PERIHP: 889 case PCLK_PERIHP: 890 return 0; 891 892 case ACLK_PERILP0: 893 case HCLK_PERILP0: 894 case PCLK_PERILP0: 895 return 0; 896 897 case ACLK_CCI: 898 return 0; 899 900 case HCLK_PERILP1: 901 case PCLK_PERILP1: 902 return 0; 903 904 case HCLK_SDMMC: 905 case SCLK_SDMMC: 906 case SCLK_EMMC: 907 ret = rk3399_mmc_set_clk(priv->cru, clk->id, rate); 908 break; 909 case SCLK_MAC: 910 ret = rk3399_gmac_set_clk(priv->cru, rate); 911 break; 912 case SCLK_I2C1: 913 case SCLK_I2C2: 914 case SCLK_I2C3: 915 case SCLK_I2C5: 916 case SCLK_I2C6: 917 case SCLK_I2C7: 918 ret = rk3399_i2c_set_clk(priv->cru, clk->id, rate); 919 break; 920 case SCLK_SPI0...SCLK_SPI5: 921 ret = rk3399_spi_set_clk(priv->cru, clk->id, rate); 922 break; 923 case PCLK_HDMI_CTRL: 924 case PCLK_VIO_GRF: 925 /* the PCLK gates for video are enabled by default */ 926 break; 927 case DCLK_VOP0: 928 case DCLK_VOP1: 929 ret = rk3399_vop_set_clk(priv->cru, clk->id, rate); 930 break; 931 case SCLK_DDRCLK: 932 ret = rk3399_ddr_set_clk(priv->cru, rate); 933 break; 934 case PCLK_EFUSE1024NS: 935 break; 936 case SCLK_SARADC: 937 ret = rk3399_saradc_set_clk(priv->cru, rate); 938 break; 939 default: 940 return -ENOENT; 941 } 942 943 return ret; 944 } 945 946 static int __maybe_unused rk3399_gmac_set_parent(struct clk *clk, struct clk *parent) 947 { 948 struct rk3399_clk_priv *priv = dev_get_priv(clk->dev); 949 const char *clock_output_name; 950 int ret; 951 952 /* 953 * If the requested parent is in the same clock-controller and 954 * the id is SCLK_MAC ("clk_gmac"), switch to the internal clock. 955 */ 956 if ((parent->dev == clk->dev) && (parent->id == SCLK_MAC)) { 957 debug("%s: switching RGMII to SCLK_MAC\n", __func__); 958 rk_clrreg(&priv->cru->clksel_con[19], BIT(4)); 959 return 0; 960 } 961 962 /* 963 * Otherwise, we need to check the clock-output-names of the 964 * requested parent to see if the requested id is "clkin_gmac". 965 */ 966 ret = dev_read_string_index(parent->dev, "clock-output-names", 967 parent->id, &clock_output_name); 968 if (ret < 0) 969 return -ENODATA; 970 971 /* If this is "clkin_gmac", switch to the external clock input */ 972 if (!strcmp(clock_output_name, "clkin_gmac")) { 973 debug("%s: switching RGMII to CLKIN\n", __func__); 974 rk_setreg(&priv->cru->clksel_con[19], BIT(4)); 975 return 0; 976 } 977 978 return -EINVAL; 979 } 980 981 static int __maybe_unused rk3399_clk_set_parent(struct clk *clk, struct clk *parent) 982 { 983 switch (clk->id) { 984 case SCLK_RMII_SRC: 985 return rk3399_gmac_set_parent(clk, parent); 986 } 987 988 debug("%s: unsupported clk %ld\n", __func__, clk->id); 989 return -ENOENT; 990 } 991 992 static int rk3399_clk_enable(struct clk *clk) 993 { 994 switch (clk->id) { 995 case HCLK_HOST0: 996 case HCLK_HOST0_ARB: 997 case HCLK_HOST1: 998 case HCLK_HOST1_ARB: 999 return 0; 1000 } 1001 1002 debug("%s: unsupported clk %ld\n", __func__, clk->id); 1003 return -ENOENT; 1004 } 1005 1006 static struct clk_ops rk3399_clk_ops = { 1007 .get_rate = rk3399_clk_get_rate, 1008 .set_rate = rk3399_clk_set_rate, 1009 #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) 1010 .set_parent = rk3399_clk_set_parent, 1011 #endif 1012 .enable = rk3399_clk_enable, 1013 }; 1014 1015 #ifdef CONFIG_SPL_BUILD 1016 static void rkclk_init(struct rk3399_cru *cru) 1017 { 1018 u32 aclk_div; 1019 u32 hclk_div; 1020 u32 pclk_div; 1021 1022 rk3399_configure_cpu(cru, APLL_L_600_MHZ); 1023 /* 1024 * some cru registers changed by bootrom, we'd better reset them to 1025 * reset/default values described in TRM to avoid confusion in kernel. 1026 * Please consider these three lines as a fix of bootrom bug. 1027 */ 1028 rk_clrsetreg(&cru->clksel_con[12], 0xffff, 0x4101); 1029 rk_clrsetreg(&cru->clksel_con[19], 0xffff, 0x033f); 1030 rk_clrsetreg(&cru->clksel_con[56], 0x0003, 0x0003); 1031 1032 /* configure gpll cpll */ 1033 rkclk_set_pll(&cru->gpll_con[0], &gpll_init_cfg); 1034 rkclk_set_pll(&cru->cpll_con[0], &cpll_init_cfg); 1035 1036 /* configure perihp aclk, hclk, pclk */ 1037 aclk_div = GPLL_HZ / PERIHP_ACLK_HZ - 1; 1038 assert((aclk_div + 1) * PERIHP_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f); 1039 1040 hclk_div = PERIHP_ACLK_HZ / PERIHP_HCLK_HZ - 1; 1041 assert((hclk_div + 1) * PERIHP_HCLK_HZ == 1042 PERIHP_ACLK_HZ && (hclk_div < 0x4)); 1043 1044 pclk_div = PERIHP_ACLK_HZ / PERIHP_PCLK_HZ - 1; 1045 assert((pclk_div + 1) * PERIHP_PCLK_HZ == 1046 PERIHP_ACLK_HZ && (pclk_div < 0x7)); 1047 1048 rk_clrsetreg(&cru->clksel_con[14], 1049 PCLK_PERIHP_DIV_CON_MASK | HCLK_PERIHP_DIV_CON_MASK | 1050 ACLK_PERIHP_PLL_SEL_MASK | ACLK_PERIHP_DIV_CON_MASK, 1051 pclk_div << PCLK_PERIHP_DIV_CON_SHIFT | 1052 hclk_div << HCLK_PERIHP_DIV_CON_SHIFT | 1053 ACLK_PERIHP_PLL_SEL_GPLL << ACLK_PERIHP_PLL_SEL_SHIFT | 1054 aclk_div << ACLK_PERIHP_DIV_CON_SHIFT); 1055 1056 /* configure perilp0 aclk, hclk, pclk */ 1057 aclk_div = GPLL_HZ / PERILP0_ACLK_HZ - 1; 1058 assert((aclk_div + 1) * PERILP0_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f); 1059 1060 hclk_div = PERILP0_ACLK_HZ / PERILP0_HCLK_HZ - 1; 1061 assert((hclk_div + 1) * PERILP0_HCLK_HZ == 1062 PERILP0_ACLK_HZ && (hclk_div < 0x4)); 1063 1064 pclk_div = PERILP0_ACLK_HZ / PERILP0_PCLK_HZ - 1; 1065 assert((pclk_div + 1) * PERILP0_PCLK_HZ == 1066 PERILP0_ACLK_HZ && (pclk_div < 0x7)); 1067 1068 rk_clrsetreg(&cru->clksel_con[23], 1069 PCLK_PERILP0_DIV_CON_MASK | HCLK_PERILP0_DIV_CON_MASK | 1070 ACLK_PERILP0_PLL_SEL_MASK | ACLK_PERILP0_DIV_CON_MASK, 1071 pclk_div << PCLK_PERILP0_DIV_CON_SHIFT | 1072 hclk_div << HCLK_PERILP0_DIV_CON_SHIFT | 1073 ACLK_PERILP0_PLL_SEL_GPLL << ACLK_PERILP0_PLL_SEL_SHIFT | 1074 aclk_div << ACLK_PERILP0_DIV_CON_SHIFT); 1075 1076 /* perilp1 hclk select gpll as source */ 1077 hclk_div = GPLL_HZ / PERILP1_HCLK_HZ - 1; 1078 assert((hclk_div + 1) * PERILP1_HCLK_HZ == 1079 GPLL_HZ && (hclk_div < 0x1f)); 1080 1081 pclk_div = PERILP1_HCLK_HZ / PERILP1_HCLK_HZ - 1; 1082 assert((pclk_div + 1) * PERILP1_HCLK_HZ == 1083 PERILP1_HCLK_HZ && (hclk_div < 0x7)); 1084 1085 rk_clrsetreg(&cru->clksel_con[25], 1086 PCLK_PERILP1_DIV_CON_MASK | HCLK_PERILP1_DIV_CON_MASK | 1087 HCLK_PERILP1_PLL_SEL_MASK, 1088 pclk_div << PCLK_PERILP1_DIV_CON_SHIFT | 1089 hclk_div << HCLK_PERILP1_DIV_CON_SHIFT | 1090 HCLK_PERILP1_PLL_SEL_GPLL << HCLK_PERILP1_PLL_SEL_SHIFT); 1091 } 1092 #endif 1093 1094 static int rk3399_clk_probe(struct udevice *dev) 1095 { 1096 #ifdef CONFIG_SPL_BUILD 1097 struct rk3399_clk_priv *priv = dev_get_priv(dev); 1098 1099 #if CONFIG_IS_ENABLED(OF_PLATDATA) 1100 struct rk3399_clk_plat *plat = dev_get_platdata(dev); 1101 1102 priv->cru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]); 1103 #endif 1104 rkclk_init(priv->cru); 1105 #endif 1106 return 0; 1107 } 1108 1109 static int rk3399_clk_ofdata_to_platdata(struct udevice *dev) 1110 { 1111 #if !CONFIG_IS_ENABLED(OF_PLATDATA) 1112 struct rk3399_clk_priv *priv = dev_get_priv(dev); 1113 1114 priv->cru = dev_read_addr_ptr(dev); 1115 #endif 1116 return 0; 1117 } 1118 1119 static int rk3399_clk_bind(struct udevice *dev) 1120 { 1121 int ret; 1122 struct udevice *sys_child; 1123 struct sysreset_reg *priv; 1124 1125 /* The reset driver does not have a device node, so bind it here */ 1126 ret = device_bind_driver(dev, "rockchip_sysreset", "sysreset", 1127 &sys_child); 1128 if (ret) { 1129 debug("Warning: No sysreset driver: ret=%d\n", ret); 1130 } else { 1131 priv = malloc(sizeof(struct sysreset_reg)); 1132 priv->glb_srst_fst_value = offsetof(struct rk3399_cru, 1133 glb_srst_fst_value); 1134 priv->glb_srst_snd_value = offsetof(struct rk3399_cru, 1135 glb_srst_snd_value); 1136 sys_child->priv = priv; 1137 } 1138 1139 #if CONFIG_IS_ENABLED(CONFIG_RESET_ROCKCHIP) 1140 ret = offsetof(struct rk3399_cru, softrst_con[0]); 1141 ret = rockchip_reset_bind(dev, ret, 21); 1142 if (ret) 1143 debug("Warning: software reset driver bind faile\n"); 1144 #endif 1145 1146 return 0; 1147 } 1148 1149 static const struct udevice_id rk3399_clk_ids[] = { 1150 { .compatible = "rockchip,rk3399-cru" }, 1151 { } 1152 }; 1153 1154 U_BOOT_DRIVER(clk_rk3399) = { 1155 .name = "rockchip_rk3399_cru", 1156 .id = UCLASS_CLK, 1157 .of_match = rk3399_clk_ids, 1158 .priv_auto_alloc_size = sizeof(struct rk3399_clk_priv), 1159 .ofdata_to_platdata = rk3399_clk_ofdata_to_platdata, 1160 .ops = &rk3399_clk_ops, 1161 .bind = rk3399_clk_bind, 1162 .probe = rk3399_clk_probe, 1163 #if CONFIG_IS_ENABLED(OF_PLATDATA) 1164 .platdata_auto_alloc_size = sizeof(struct rk3399_clk_plat), 1165 #endif 1166 }; 1167 1168 static ulong rk3399_i2c_get_pmuclk(struct rk3399_pmucru *pmucru, ulong clk_id) 1169 { 1170 u32 div, con; 1171 1172 switch (clk_id) { 1173 case SCLK_I2C0_PMU: 1174 con = readl(&pmucru->pmucru_clksel[2]); 1175 div = I2C_CLK_DIV_VALUE(con, 0); 1176 break; 1177 case SCLK_I2C4_PMU: 1178 con = readl(&pmucru->pmucru_clksel[3]); 1179 div = I2C_CLK_DIV_VALUE(con, 4); 1180 break; 1181 case SCLK_I2C8_PMU: 1182 con = readl(&pmucru->pmucru_clksel[2]); 1183 div = I2C_CLK_DIV_VALUE(con, 8); 1184 break; 1185 default: 1186 printf("do not support this i2c bus\n"); 1187 return -EINVAL; 1188 } 1189 1190 return DIV_TO_RATE(PPLL_HZ, div); 1191 } 1192 1193 static ulong rk3399_i2c_set_pmuclk(struct rk3399_pmucru *pmucru, ulong clk_id, 1194 uint hz) 1195 { 1196 int src_clk_div; 1197 1198 src_clk_div = PPLL_HZ / hz; 1199 assert(src_clk_div - 1 < 127); 1200 1201 switch (clk_id) { 1202 case SCLK_I2C0_PMU: 1203 rk_clrsetreg(&pmucru->pmucru_clksel[2], I2C_PMUCLK_REG_MASK(0), 1204 I2C_PMUCLK_REG_VALUE(0, src_clk_div)); 1205 break; 1206 case SCLK_I2C4_PMU: 1207 rk_clrsetreg(&pmucru->pmucru_clksel[3], I2C_PMUCLK_REG_MASK(4), 1208 I2C_PMUCLK_REG_VALUE(4, src_clk_div)); 1209 break; 1210 case SCLK_I2C8_PMU: 1211 rk_clrsetreg(&pmucru->pmucru_clksel[2], I2C_PMUCLK_REG_MASK(8), 1212 I2C_PMUCLK_REG_VALUE(8, src_clk_div)); 1213 break; 1214 default: 1215 printf("do not support this i2c bus\n"); 1216 return -EINVAL; 1217 } 1218 1219 return DIV_TO_RATE(PPLL_HZ, src_clk_div); 1220 } 1221 1222 static ulong rk3399_pwm_get_clk(struct rk3399_pmucru *pmucru) 1223 { 1224 u32 div, con; 1225 1226 /* PWM closk rate is same as pclk_pmu */ 1227 con = readl(&pmucru->pmucru_clksel[0]); 1228 div = con & PMU_PCLK_DIV_CON_MASK; 1229 1230 return DIV_TO_RATE(PPLL_HZ, div); 1231 } 1232 1233 static ulong rk3399_pmuclk_get_rate(struct clk *clk) 1234 { 1235 struct rk3399_pmuclk_priv *priv = dev_get_priv(clk->dev); 1236 ulong rate = 0; 1237 1238 switch (clk->id) { 1239 case PCLK_RKPWM_PMU: 1240 rate = rk3399_pwm_get_clk(priv->pmucru); 1241 break; 1242 case SCLK_I2C0_PMU: 1243 case SCLK_I2C4_PMU: 1244 case SCLK_I2C8_PMU: 1245 rate = rk3399_i2c_get_pmuclk(priv->pmucru, clk->id); 1246 break; 1247 default: 1248 return -ENOENT; 1249 } 1250 1251 return rate; 1252 } 1253 1254 static ulong rk3399_pmuclk_set_rate(struct clk *clk, ulong rate) 1255 { 1256 struct rk3399_pmuclk_priv *priv = dev_get_priv(clk->dev); 1257 ulong ret = 0; 1258 1259 switch (clk->id) { 1260 case SCLK_I2C0_PMU: 1261 case SCLK_I2C4_PMU: 1262 case SCLK_I2C8_PMU: 1263 ret = rk3399_i2c_set_pmuclk(priv->pmucru, clk->id, rate); 1264 break; 1265 default: 1266 return -ENOENT; 1267 } 1268 1269 return ret; 1270 } 1271 1272 static struct clk_ops rk3399_pmuclk_ops = { 1273 .get_rate = rk3399_pmuclk_get_rate, 1274 .set_rate = rk3399_pmuclk_set_rate, 1275 }; 1276 1277 #ifndef CONFIG_SPL_BUILD 1278 static void pmuclk_init(struct rk3399_pmucru *pmucru) 1279 { 1280 u32 pclk_div; 1281 1282 /* configure pmu pll(ppll) */ 1283 rkclk_set_pll(&pmucru->ppll_con[0], &ppll_init_cfg); 1284 1285 /* configure pmu pclk */ 1286 pclk_div = PPLL_HZ / PMU_PCLK_HZ - 1; 1287 rk_clrsetreg(&pmucru->pmucru_clksel[0], 1288 PMU_PCLK_DIV_CON_MASK, 1289 pclk_div << PMU_PCLK_DIV_CON_SHIFT); 1290 } 1291 #endif 1292 1293 static int rk3399_pmuclk_probe(struct udevice *dev) 1294 { 1295 #if CONFIG_IS_ENABLED(OF_PLATDATA) || !defined(CONFIG_SPL_BUILD) 1296 struct rk3399_pmuclk_priv *priv = dev_get_priv(dev); 1297 #endif 1298 1299 #if CONFIG_IS_ENABLED(OF_PLATDATA) 1300 struct rk3399_pmuclk_plat *plat = dev_get_platdata(dev); 1301 1302 priv->pmucru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]); 1303 #endif 1304 1305 #ifndef CONFIG_SPL_BUILD 1306 pmuclk_init(priv->pmucru); 1307 #endif 1308 return 0; 1309 } 1310 1311 static int rk3399_pmuclk_ofdata_to_platdata(struct udevice *dev) 1312 { 1313 #if !CONFIG_IS_ENABLED(OF_PLATDATA) 1314 struct rk3399_pmuclk_priv *priv = dev_get_priv(dev); 1315 1316 priv->pmucru = dev_read_addr_ptr(dev); 1317 #endif 1318 return 0; 1319 } 1320 1321 static int rk3399_pmuclk_bind(struct udevice *dev) 1322 { 1323 #if CONFIG_IS_ENABLED(CONFIG_RESET_ROCKCHIP) 1324 int ret; 1325 1326 ret = offsetof(struct rk3399_pmucru, pmucru_softrst_con[0]); 1327 ret = rockchip_reset_bind(dev, ret, 2); 1328 if (ret) 1329 debug("Warning: software reset driver bind faile\n"); 1330 #endif 1331 return 0; 1332 } 1333 1334 static const struct udevice_id rk3399_pmuclk_ids[] = { 1335 { .compatible = "rockchip,rk3399-pmucru" }, 1336 { } 1337 }; 1338 1339 U_BOOT_DRIVER(rockchip_rk3399_pmuclk) = { 1340 .name = "rockchip_rk3399_pmucru", 1341 .id = UCLASS_CLK, 1342 .of_match = rk3399_pmuclk_ids, 1343 .priv_auto_alloc_size = sizeof(struct rk3399_pmuclk_priv), 1344 .ofdata_to_platdata = rk3399_pmuclk_ofdata_to_platdata, 1345 .ops = &rk3399_pmuclk_ops, 1346 .probe = rk3399_pmuclk_probe, 1347 .bind = rk3399_pmuclk_bind, 1348 #if CONFIG_IS_ENABLED(OF_PLATDATA) 1349 .platdata_auto_alloc_size = sizeof(struct rk3399_pmuclk_plat), 1350 #endif 1351 }; 1352