1 /* 2 * (C) Copyright 2017 Rockchip Electronics Co., Ltd 3 * 4 * SPDX-License-Identifier: GPL-2.0 5 */ 6 7 #include <common.h> 8 #include <clk-uclass.h> 9 #include <dm.h> 10 #include <errno.h> 11 #include <syscon.h> 12 #include <asm/io.h> 13 #include <asm/arch/clock.h> 14 #include <asm/arch/cru_rk322x.h> 15 #include <asm/arch/hardware.h> 16 #include <dm/lists.h> 17 #include <dt-bindings/clock/rk3228-cru.h> 18 #include <linux/log2.h> 19 20 DECLARE_GLOBAL_DATA_PTR; 21 22 enum { 23 VCO_MAX_HZ = 3200U * 1000000, 24 VCO_MIN_HZ = 800 * 1000000, 25 OUTPUT_MAX_HZ = 3200U * 1000000, 26 OUTPUT_MIN_HZ = 24 * 1000000, 27 }; 28 29 #define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1)) 30 31 #define PLL_DIVISORS(hz, _refdiv, _postdiv1, _postdiv2) {\ 32 .refdiv = _refdiv,\ 33 .fbdiv = (u32)((u64)hz * _refdiv * _postdiv1 * _postdiv2 / OSC_HZ), \ 34 .postdiv1 = _postdiv1, .postdiv2 = _postdiv2};\ 35 _Static_assert(((u64)hz * _refdiv * _postdiv1 * _postdiv2 / OSC_HZ) * \ 36 OSC_HZ / (_refdiv * _postdiv1 * _postdiv2) == hz, \ 37 #hz "Hz cannot be hit with PLL "\ 38 "divisors on line " __stringify(__LINE__)); 39 40 /* use integer mode*/ 41 static const struct pll_div apll_init_cfg = PLL_DIVISORS(APLL_HZ, 1, 3, 1); 42 static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2, 1); 43 44 static int rkclk_set_pll(struct rk322x_cru *cru, enum rk_clk_id clk_id, 45 const struct pll_div *div) 46 { 47 int pll_id = rk_pll_id(clk_id); 48 struct rk322x_pll *pll = &cru->pll[pll_id]; 49 50 /* All PLLs have same VCO and output frequency range restrictions. */ 51 uint vco_hz = OSC_HZ / 1000 * div->fbdiv / div->refdiv * 1000; 52 uint output_hz = vco_hz / div->postdiv1 / div->postdiv2; 53 54 debug("PLL at %p: fb=%d, ref=%d, pst1=%d, pst2=%d, vco=%u Hz, output=%u Hz\n", 55 pll, div->fbdiv, div->refdiv, div->postdiv1, 56 div->postdiv2, vco_hz, output_hz); 57 assert(vco_hz >= VCO_MIN_HZ && vco_hz <= VCO_MAX_HZ && 58 output_hz >= OUTPUT_MIN_HZ && output_hz <= OUTPUT_MAX_HZ); 59 60 /* use integer mode */ 61 rk_setreg(&pll->con1, 1 << PLL_DSMPD_SHIFT); 62 /* Power down */ 63 rk_setreg(&pll->con1, 1 << PLL_PD_SHIFT); 64 65 rk_clrsetreg(&pll->con0, 66 PLL_POSTDIV1_MASK | PLL_FBDIV_MASK, 67 (div->postdiv1 << PLL_POSTDIV1_SHIFT) | div->fbdiv); 68 rk_clrsetreg(&pll->con1, PLL_POSTDIV2_MASK | PLL_REFDIV_MASK, 69 (div->postdiv2 << PLL_POSTDIV2_SHIFT | 70 div->refdiv << PLL_REFDIV_SHIFT)); 71 72 /* Power Up */ 73 rk_clrreg(&pll->con1, 1 << PLL_PD_SHIFT); 74 75 /* waiting for pll lock */ 76 while (readl(&pll->con1) & (1 << PLL_LOCK_STATUS_SHIFT)) 77 udelay(1); 78 79 return 0; 80 } 81 82 static void rkclk_init(struct rk322x_cru *cru) 83 { 84 u32 aclk_div; 85 u32 hclk_div; 86 u32 pclk_div; 87 88 /* pll enter slow-mode */ 89 rk_clrsetreg(&cru->cru_mode_con, 90 GPLL_MODE_MASK | APLL_MODE_MASK, 91 GPLL_MODE_SLOW << GPLL_MODE_SHIFT | 92 APLL_MODE_SLOW << APLL_MODE_SHIFT); 93 94 /* init pll */ 95 rkclk_set_pll(cru, CLK_ARM, &apll_init_cfg); 96 rkclk_set_pll(cru, CLK_GENERAL, &gpll_init_cfg); 97 98 /* 99 * select apll as cpu/core clock pll source and 100 * set up dependent divisors for PERI and ACLK clocks. 101 * core hz : apll = 1:1 102 */ 103 aclk_div = APLL_HZ / CORE_ACLK_HZ - 1; 104 assert((aclk_div + 1) * CORE_ACLK_HZ == APLL_HZ && aclk_div < 0x7); 105 106 pclk_div = APLL_HZ / CORE_PERI_HZ - 1; 107 assert((pclk_div + 1) * CORE_PERI_HZ == APLL_HZ && pclk_div < 0xf); 108 109 rk_clrsetreg(&cru->cru_clksel_con[0], 110 CORE_CLK_PLL_SEL_MASK | CORE_DIV_CON_MASK, 111 CORE_CLK_PLL_SEL_APLL << CORE_CLK_PLL_SEL_SHIFT | 112 0 << CORE_DIV_CON_SHIFT); 113 114 rk_clrsetreg(&cru->cru_clksel_con[1], 115 CORE_ACLK_DIV_MASK | CORE_PERI_DIV_MASK, 116 aclk_div << CORE_ACLK_DIV_SHIFT | 117 pclk_div << CORE_PERI_DIV_SHIFT); 118 119 /* 120 * select gpll as pd_bus bus clock source and 121 * set up dependent divisors for PCLK/HCLK and ACLK clocks. 122 */ 123 aclk_div = GPLL_HZ / BUS_ACLK_HZ - 1; 124 assert((aclk_div + 1) * BUS_ACLK_HZ == GPLL_HZ && aclk_div <= 0x1f); 125 126 pclk_div = BUS_ACLK_HZ / BUS_PCLK_HZ - 1; 127 assert((pclk_div + 1) * BUS_PCLK_HZ == GPLL_HZ && pclk_div <= 0x7); 128 129 hclk_div = BUS_ACLK_HZ / BUS_HCLK_HZ - 1; 130 assert((hclk_div + 1) * BUS_HCLK_HZ == GPLL_HZ && hclk_div <= 0x3); 131 132 rk_clrsetreg(&cru->cru_clksel_con[0], 133 BUS_ACLK_PLL_SEL_MASK | BUS_ACLK_DIV_MASK, 134 BUS_ACLK_PLL_SEL_GPLL << BUS_ACLK_PLL_SEL_SHIFT | 135 aclk_div << BUS_ACLK_DIV_SHIFT); 136 137 rk_clrsetreg(&cru->cru_clksel_con[1], 138 BUS_PCLK_DIV_MASK | BUS_HCLK_DIV_MASK, 139 pclk_div << BUS_PCLK_DIV_SHIFT | 140 hclk_div << BUS_HCLK_DIV_SHIFT); 141 142 /* 143 * select gpll as pd_peri bus clock source and 144 * set up dependent divisors for PCLK/HCLK and ACLK clocks. 145 */ 146 aclk_div = GPLL_HZ / PERI_ACLK_HZ - 1; 147 assert((aclk_div + 1) * PERI_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f); 148 149 hclk_div = ilog2(PERI_ACLK_HZ / PERI_HCLK_HZ); 150 assert((1 << hclk_div) * PERI_HCLK_HZ == 151 PERI_ACLK_HZ && (hclk_div < 0x4)); 152 153 pclk_div = ilog2(PERI_ACLK_HZ / PERI_PCLK_HZ); 154 assert((1 << pclk_div) * PERI_PCLK_HZ == 155 PERI_ACLK_HZ && pclk_div < 0x8); 156 157 rk_clrsetreg(&cru->cru_clksel_con[10], 158 PERI_PLL_SEL_MASK | PERI_PCLK_DIV_MASK | 159 PERI_HCLK_DIV_MASK | PERI_ACLK_DIV_MASK, 160 PERI_PLL_GPLL << PERI_PLL_SEL_SHIFT | 161 pclk_div << PERI_PCLK_DIV_SHIFT | 162 hclk_div << PERI_HCLK_DIV_SHIFT | 163 aclk_div << PERI_ACLK_DIV_SHIFT); 164 165 /* PLL enter normal-mode */ 166 rk_clrsetreg(&cru->cru_mode_con, 167 GPLL_MODE_MASK | APLL_MODE_MASK, 168 GPLL_MODE_NORM << GPLL_MODE_SHIFT | 169 APLL_MODE_NORM << APLL_MODE_SHIFT); 170 } 171 172 /* Get pll rate by id */ 173 static uint32_t rkclk_pll_get_rate(struct rk322x_cru *cru, 174 enum rk_clk_id clk_id) 175 { 176 uint32_t refdiv, fbdiv, postdiv1, postdiv2; 177 uint32_t con; 178 int pll_id = rk_pll_id(clk_id); 179 struct rk322x_pll *pll = &cru->pll[pll_id]; 180 static u8 clk_shift[CLK_COUNT] = { 181 0xff, APLL_MODE_SHIFT, DPLL_MODE_SHIFT, 0xff, 182 GPLL_MODE_SHIFT, 0xff 183 }; 184 static u32 clk_mask[CLK_COUNT] = { 185 0xff, APLL_MODE_MASK, DPLL_MODE_MASK, 0xff, 186 GPLL_MODE_MASK, 0xff 187 }; 188 uint shift; 189 uint mask; 190 191 con = readl(&cru->cru_mode_con); 192 shift = clk_shift[clk_id]; 193 mask = clk_mask[clk_id]; 194 195 switch ((con & mask) >> shift) { 196 case GPLL_MODE_SLOW: 197 return OSC_HZ; 198 case GPLL_MODE_NORM: 199 200 /* normal mode */ 201 con = readl(&pll->con0); 202 postdiv1 = (con & PLL_POSTDIV1_MASK) >> PLL_POSTDIV1_SHIFT; 203 fbdiv = (con & PLL_FBDIV_MASK) >> PLL_FBDIV_SHIFT; 204 con = readl(&pll->con1); 205 postdiv2 = (con & PLL_POSTDIV2_MASK) >> PLL_POSTDIV2_SHIFT; 206 refdiv = (con & PLL_REFDIV_MASK) >> PLL_REFDIV_SHIFT; 207 return (24 * fbdiv / (refdiv * postdiv1 * postdiv2)) * 1000000; 208 default: 209 return 32768; 210 } 211 } 212 213 static ulong rockchip_mmc_get_clk(struct rk322x_cru *cru, uint clk_general_rate, 214 int periph) 215 { 216 uint src_rate; 217 uint div, mux; 218 u32 con; 219 220 switch (periph) { 221 case HCLK_EMMC: 222 case SCLK_EMMC: 223 con = readl(&cru->cru_clksel_con[11]); 224 mux = (con & EMMC_PLL_MASK) >> EMMC_PLL_SHIFT; 225 con = readl(&cru->cru_clksel_con[12]); 226 div = (con & EMMC_DIV_MASK) >> EMMC_DIV_SHIFT; 227 break; 228 case HCLK_SDMMC: 229 case SCLK_SDMMC: 230 con = readl(&cru->cru_clksel_con[11]); 231 mux = (con & MMC0_PLL_MASK) >> MMC0_PLL_SHIFT; 232 div = (con & MMC0_DIV_MASK) >> MMC0_DIV_SHIFT; 233 break; 234 default: 235 return -EINVAL; 236 } 237 238 src_rate = mux == EMMC_SEL_24M ? OSC_HZ : clk_general_rate; 239 return DIV_TO_RATE(src_rate, div) / 2; 240 } 241 242 static ulong rk322x_mac_set_clk(struct rk322x_cru *cru, uint freq) 243 { 244 ulong ret; 245 246 /* 247 * The gmac clock can be derived either from an external clock 248 * or can be generated from internally by a divider from SCLK_MAC. 249 */ 250 if (readl(&cru->cru_clksel_con[5]) & BIT(5)) { 251 /* An external clock will always generate the right rate... */ 252 ret = freq; 253 } else { 254 u32 con = readl(&cru->cru_clksel_con[5]); 255 ulong pll_rate; 256 u8 div; 257 258 if ((con >> MAC_PLL_SEL_SHIFT) & MAC_PLL_SEL_MASK) 259 pll_rate = GPLL_HZ; 260 else 261 /* CPLL is not set */ 262 return -EPERM; 263 264 div = DIV_ROUND_UP(pll_rate, freq) - 1; 265 if (div <= 0x1f) 266 rk_clrsetreg(&cru->cru_clksel_con[5], CLK_MAC_DIV_MASK, 267 div << CLK_MAC_DIV_SHIFT); 268 else 269 debug("Unsupported div for gmac:%d\n", div); 270 271 return DIV_TO_RATE(pll_rate, div); 272 } 273 274 return ret; 275 } 276 277 static ulong rockchip_mmc_set_clk(struct rk322x_cru *cru, uint clk_general_rate, 278 int periph, uint freq) 279 { 280 int src_clk_div; 281 int mux; 282 283 debug("%s: clk_general_rate=%u\n", __func__, clk_general_rate); 284 285 /* mmc clock defaulg div 2 internal, need provide double in cru */ 286 src_clk_div = DIV_ROUND_UP(clk_general_rate / 2, freq); 287 288 if (src_clk_div > 128) { 289 src_clk_div = DIV_ROUND_UP(OSC_HZ / 2, freq); 290 assert(src_clk_div - 1 < 128); 291 mux = EMMC_SEL_24M; 292 } else { 293 mux = EMMC_SEL_GPLL; 294 } 295 296 switch (periph) { 297 case HCLK_EMMC: 298 case SCLK_EMMC: 299 rk_clrsetreg(&cru->cru_clksel_con[11], 300 EMMC_PLL_MASK, 301 mux << EMMC_PLL_SHIFT); 302 rk_clrsetreg(&cru->cru_clksel_con[12], 303 EMMC_DIV_MASK, 304 (src_clk_div - 1) << EMMC_DIV_SHIFT); 305 break; 306 case HCLK_SDMMC: 307 case SCLK_SDMMC: 308 rk_clrsetreg(&cru->cru_clksel_con[11], 309 MMC0_PLL_MASK | MMC0_DIV_MASK, 310 mux << MMC0_PLL_SHIFT | 311 (src_clk_div - 1) << MMC0_DIV_SHIFT); 312 break; 313 default: 314 return -EINVAL; 315 } 316 317 return rockchip_mmc_get_clk(cru, clk_general_rate, periph); 318 } 319 320 static int rk322x_ddr_set_clk(struct rk322x_cru *cru, unsigned int set_rate) 321 { 322 struct pll_div dpll_cfg; 323 324 /* clk_ddrc == DPLL = 24MHz / refdiv * fbdiv / postdiv1 / postdiv2 */ 325 switch (set_rate) { 326 case 400*MHz: 327 dpll_cfg = (struct pll_div) 328 {.refdiv = 1, .fbdiv = 50, .postdiv1 = 3, .postdiv2 = 1}; 329 break; 330 case 600*MHz: 331 dpll_cfg = (struct pll_div) 332 {.refdiv = 1, .fbdiv = 75, .postdiv1 = 3, .postdiv2 = 1}; 333 break; 334 case 800*MHz: 335 dpll_cfg = (struct pll_div) 336 {.refdiv = 1, .fbdiv = 100, .postdiv1 = 3, .postdiv2 = 1}; 337 break; 338 } 339 340 /* pll enter slow-mode */ 341 rk_clrsetreg(&cru->cru_mode_con, DPLL_MODE_MASK, 342 DPLL_MODE_SLOW << DPLL_MODE_SHIFT); 343 rkclk_set_pll(cru, CLK_DDR, &dpll_cfg); 344 /* PLL enter normal-mode */ 345 rk_clrsetreg(&cru->cru_mode_con, DPLL_MODE_MASK, 346 DPLL_MODE_NORM << DPLL_MODE_SHIFT); 347 348 return set_rate; 349 } 350 static ulong rk322x_clk_get_rate(struct clk *clk) 351 { 352 struct rk322x_clk_priv *priv = dev_get_priv(clk->dev); 353 ulong rate, gclk_rate; 354 355 gclk_rate = rkclk_pll_get_rate(priv->cru, CLK_GENERAL); 356 switch (clk->id) { 357 case 0 ... 63: 358 rate = rkclk_pll_get_rate(priv->cru, clk->id); 359 break; 360 case HCLK_EMMC: 361 case SCLK_EMMC: 362 case HCLK_SDMMC: 363 case SCLK_SDMMC: 364 rate = rockchip_mmc_get_clk(priv->cru, gclk_rate, clk->id); 365 break; 366 default: 367 return -ENOENT; 368 } 369 370 return rate; 371 } 372 373 static ulong rk322x_clk_set_rate(struct clk *clk, ulong rate) 374 { 375 struct rk322x_clk_priv *priv = dev_get_priv(clk->dev); 376 ulong new_rate, gclk_rate; 377 378 gclk_rate = rkclk_pll_get_rate(priv->cru, CLK_GENERAL); 379 switch (clk->id) { 380 case HCLK_EMMC: 381 case SCLK_EMMC: 382 case HCLK_SDMMC: 383 case SCLK_SDMMC: 384 new_rate = rockchip_mmc_set_clk(priv->cru, gclk_rate, 385 clk->id, rate); 386 break; 387 case CLK_DDR: 388 new_rate = rk322x_ddr_set_clk(priv->cru, rate); 389 break; 390 case SCLK_MAC: 391 new_rate = rk322x_mac_set_clk(priv->cru, rate); 392 break; 393 case PLL_GPLL: 394 return 0; 395 default: 396 return -ENOENT; 397 } 398 399 return new_rate; 400 } 401 402 static int rk322x_gmac_set_parent(struct clk *clk, struct clk *parent) 403 { 404 struct rk322x_clk_priv *priv = dev_get_priv(clk->dev); 405 struct rk322x_cru *cru = priv->cru; 406 407 /* 408 * If the requested parent is in the same clock-controller and the id 409 * is SCLK_MAC_SRC ("sclk_gmac_src"), switch to the internal clock. 410 */ 411 if ((parent->dev == clk->dev) && (parent->id == SCLK_MAC_SRC)) { 412 debug("%s: switching RGMII to SCLK_MAC_SRC\n", __func__); 413 rk_clrsetreg(&cru->cru_clksel_con[5], BIT(5), 0); 414 return 0; 415 } 416 417 /* 418 * If the requested parent is in the same clock-controller and the id 419 * is SCLK_MAC_EXTCLK (sclk_mac_extclk), switch to the external clock. 420 */ 421 if ((parent->dev == clk->dev) && (parent->id == SCLK_MAC_EXTCLK)) { 422 debug("%s: switching RGMII to SCLK_MAC_EXTCLK\n", __func__); 423 rk_clrsetreg(&cru->cru_clksel_con[5], BIT(5), BIT(5)); 424 return 0; 425 } 426 427 return -EINVAL; 428 } 429 430 static int rk322x_gmac_extclk_set_parent(struct clk *clk, struct clk *parent) 431 { 432 struct rk322x_clk_priv *priv = dev_get_priv(clk->dev); 433 const char *clock_output_name; 434 struct rk322x_cru *cru = priv->cru; 435 int ret; 436 437 ret = dev_read_string_index(parent->dev, "clock-output-names", 438 parent->id, &clock_output_name); 439 if (ret < 0) 440 return -ENODATA; 441 442 if (!strcmp(clock_output_name, "ext_gmac")) { 443 debug("%s: switching gmac extclk to ext_gmac\n", __func__); 444 rk_clrsetreg(&cru->cru_clksel_con[29], BIT(10), 0); 445 return 0; 446 } else if (!strcmp(clock_output_name, "phy_50m_out")) { 447 debug("%s: switching gmac extclk to phy_50m_out\n", __func__); 448 rk_clrsetreg(&cru->cru_clksel_con[29], BIT(10), BIT(10)); 449 return 0; 450 } 451 452 return -EINVAL; 453 } 454 455 static int rk322x_clk_set_parent(struct clk *clk, struct clk *parent) 456 { 457 switch (clk->id) { 458 case SCLK_MAC: 459 return rk322x_gmac_set_parent(clk, parent); 460 case SCLK_MAC_EXTCLK: 461 return rk322x_gmac_extclk_set_parent(clk, parent); 462 } 463 464 debug("%s: unsupported clk %ld\n", __func__, clk->id); 465 return -ENOENT; 466 } 467 468 static struct clk_ops rk322x_clk_ops = { 469 .get_rate = rk322x_clk_get_rate, 470 .set_rate = rk322x_clk_set_rate, 471 .set_parent = rk322x_clk_set_parent, 472 }; 473 474 static int rk322x_clk_ofdata_to_platdata(struct udevice *dev) 475 { 476 struct rk322x_clk_priv *priv = dev_get_priv(dev); 477 478 priv->cru = (struct rk322x_cru *)devfdt_get_addr(dev); 479 480 return 0; 481 } 482 483 static int rk322x_clk_probe(struct udevice *dev) 484 { 485 struct rk322x_clk_priv *priv = dev_get_priv(dev); 486 487 rkclk_init(priv->cru); 488 489 return 0; 490 } 491 492 static int rk322x_clk_bind(struct udevice *dev) 493 { 494 int ret; 495 struct udevice *sys_child; 496 struct sysreset_reg *priv; 497 498 /* The reset driver does not have a device node, so bind it here */ 499 ret = device_bind_driver(dev, "rockchip_sysreset", "sysreset", 500 &sys_child); 501 if (ret) { 502 debug("Warning: No sysreset driver: ret=%d\n", ret); 503 } else { 504 priv = malloc(sizeof(struct sysreset_reg)); 505 priv->glb_srst_fst_value = offsetof(struct rk322x_cru, 506 cru_glb_srst_fst_value); 507 priv->glb_srst_snd_value = offsetof(struct rk322x_cru, 508 cru_glb_srst_snd_value); 509 sys_child->priv = priv; 510 } 511 512 #if CONFIG_IS_ENABLED(CONFIG_RESET_ROCKCHIP) 513 ret = offsetof(struct rk322x_cru, cru_softrst_con[0]); 514 ret = rockchip_reset_bind(dev, ret, 9); 515 if (ret) 516 debug("Warning: software reset driver bind faile\n"); 517 #endif 518 519 return 0; 520 } 521 522 static const struct udevice_id rk322x_clk_ids[] = { 523 { .compatible = "rockchip,rk3228-cru" }, 524 { } 525 }; 526 527 U_BOOT_DRIVER(rockchip_rk322x_cru) = { 528 .name = "clk_rk322x", 529 .id = UCLASS_CLK, 530 .of_match = rk322x_clk_ids, 531 .priv_auto_alloc_size = sizeof(struct rk322x_clk_priv), 532 .ofdata_to_platdata = rk322x_clk_ofdata_to_platdata, 533 .ops = &rk322x_clk_ops, 534 .bind = rk322x_clk_bind, 535 .probe = rk322x_clk_probe, 536 }; 537