1 /*
2  * (C) Copyright 2015 Google, Inc
3  * (C) Copyright 2016 Heiko Stuebner <heiko@sntech.de>
4  *
5  * SPDX-License-Identifier:	GPL-2.0
6  */
7 
8 #include <common.h>
9 #include <clk-uclass.h>
10 #include <dm.h>
11 #include <dt-structs.h>
12 #include <errno.h>
13 #include <mapmem.h>
14 #include <syscon.h>
15 #include <asm/io.h>
16 #include <asm/arch/clock.h>
17 #include <asm/arch/cru_rk3188.h>
18 #include <asm/arch/grf_rk3188.h>
19 #include <asm/arch/hardware.h>
20 #include <dt-bindings/clock/rk3188-cru.h>
21 #include <dm/device-internal.h>
22 #include <dm/lists.h>
23 #include <dm/uclass-internal.h>
24 #include <linux/log2.h>
25 
26 DECLARE_GLOBAL_DATA_PTR;
27 
28 enum rk3188_clk_type {
29 	RK3188_CRU,
30 	RK3188A_CRU,
31 };
32 
33 struct rk3188_clk_plat {
34 #if CONFIG_IS_ENABLED(OF_PLATDATA)
35 	struct dtd_rockchip_rk3188_cru dtd;
36 #endif
37 };
38 
39 struct pll_div {
40 	u32 nr;
41 	u32 nf;
42 	u32 no;
43 };
44 
45 enum {
46 	VCO_MAX_HZ	= 2200U * 1000000,
47 	VCO_MIN_HZ	= 440 * 1000000,
48 	OUTPUT_MAX_HZ	= 2200U * 1000000,
49 	OUTPUT_MIN_HZ	= 30 * 1000000,
50 	FREF_MAX_HZ	= 2200U * 1000000,
51 	FREF_MIN_HZ	= 30 * 1000,
52 };
53 
54 enum {
55 	/* PLL CON0 */
56 	PLL_OD_MASK		= 0x0f,
57 
58 	/* PLL CON1 */
59 	PLL_NF_MASK		= 0x1fff,
60 
61 	/* PLL CON2 */
62 	PLL_BWADJ_MASK		= 0x0fff,
63 
64 	/* PLL CON3 */
65 	PLL_RESET_SHIFT		= 5,
66 
67 	/* GRF_SOC_STATUS0 */
68 	SOCSTS_DPLL_LOCK	= 1 << 5,
69 	SOCSTS_APLL_LOCK	= 1 << 6,
70 	SOCSTS_CPLL_LOCK	= 1 << 7,
71 	SOCSTS_GPLL_LOCK	= 1 << 8,
72 };
73 
74 #define DIV_TO_RATE(input_rate, div)	((input_rate) / ((div) + 1))
75 
76 #define PLL_DIVISORS(hz, _nr, _no) {\
77 	.nr = _nr, .nf = (u32)((u64)hz * _nr * _no / OSC_HZ), .no = _no};\
78 	_Static_assert(((u64)hz * _nr * _no / OSC_HZ) * OSC_HZ /\
79 		       (_nr * _no) == hz, #hz "Hz cannot be hit with PLL "\
80 		       "divisors on line " __stringify(__LINE__));
81 
82 /* Keep divisors as low as possible to reduce jitter and power usage */
83 #ifdef CONFIG_SPL_BUILD
84 static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2);
85 static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2);
86 #endif
87 
88 static int rkclk_set_pll(struct rk3188_cru *cru, enum rk_clk_id clk_id,
89 			 const struct pll_div *div, bool has_bwadj)
90 {
91 	int pll_id = rk_pll_id(clk_id);
92 	struct rk3188_pll *pll = &cru->pll[pll_id];
93 	/* All PLLs have same VCO and output frequency range restrictions. */
94 	uint vco_hz = OSC_HZ / 1000 * div->nf / div->nr * 1000;
95 	uint output_hz = vco_hz / div->no;
96 
97 	debug("PLL at %x: nf=%d, nr=%d, no=%d, vco=%u Hz, output=%u Hz\n",
98 	      (uint)pll, div->nf, div->nr, div->no, vco_hz, output_hz);
99 	assert(vco_hz >= VCO_MIN_HZ && vco_hz <= VCO_MAX_HZ &&
100 	       output_hz >= OUTPUT_MIN_HZ && output_hz <= OUTPUT_MAX_HZ &&
101 	       (div->no == 1 || !(div->no % 2)));
102 
103 	/* enter reset */
104 	rk_setreg(&pll->con3, 1 << PLL_RESET_SHIFT);
105 
106 	rk_clrsetreg(&pll->con0,
107 		     CLKR_MASK << CLKR_SHIFT | PLL_OD_MASK,
108 		     ((div->nr - 1) << CLKR_SHIFT) | (div->no - 1));
109 	rk_clrsetreg(&pll->con1, CLKF_MASK, div->nf - 1);
110 
111 	if (has_bwadj)
112 		rk_clrsetreg(&pll->con2, PLL_BWADJ_MASK, (div->nf >> 1) - 1);
113 
114 	udelay(10);
115 
116 	/* return from reset */
117 	rk_clrreg(&pll->con3, 1 << PLL_RESET_SHIFT);
118 
119 	return 0;
120 }
121 
122 static int rkclk_configure_ddr(struct rk3188_cru *cru, struct rk3188_grf *grf,
123 			       unsigned int hz, bool has_bwadj)
124 {
125 	static const struct pll_div dpll_cfg[] = {
126 		{.nf = 75, .nr = 1, .no = 6},
127 		{.nf = 400, .nr = 9, .no = 2},
128 		{.nf = 500, .nr = 9, .no = 2},
129 		{.nf = 100, .nr = 3, .no = 1},
130 	};
131 	int cfg;
132 
133 	switch (hz) {
134 	case 300000000:
135 		cfg = 0;
136 		break;
137 	case 533000000:	/* actually 533.3P MHz */
138 		cfg = 1;
139 		break;
140 	case 666000000:	/* actually 666.6P MHz */
141 		cfg = 2;
142 		break;
143 	case 800000000:
144 		cfg = 3;
145 		break;
146 	default:
147 		debug("Unsupported SDRAM frequency");
148 		return -EINVAL;
149 	}
150 
151 	/* pll enter slow-mode */
152 	rk_clrsetreg(&cru->cru_mode_con, DPLL_MODE_MASK << DPLL_MODE_SHIFT,
153 		     DPLL_MODE_SLOW << DPLL_MODE_SHIFT);
154 
155 	rkclk_set_pll(cru, CLK_DDR, &dpll_cfg[cfg], has_bwadj);
156 
157 	/* wait for pll lock */
158 	while (!(readl(&grf->soc_status0) & SOCSTS_DPLL_LOCK))
159 		udelay(1);
160 
161 	/* PLL enter normal-mode */
162 	rk_clrsetreg(&cru->cru_mode_con, DPLL_MODE_MASK << DPLL_MODE_SHIFT,
163 		     DPLL_MODE_NORMAL << DPLL_MODE_SHIFT);
164 
165 	return 0;
166 }
167 
168 static int rkclk_configure_cpu(struct rk3188_cru *cru, struct rk3188_grf *grf,
169 			      unsigned int hz, bool has_bwadj)
170 {
171 	static const struct pll_div apll_cfg[] = {
172 		{.nf = 50, .nr = 1, .no = 2},
173 		{.nf = 67, .nr = 1, .no = 1},
174 	};
175 	int div_core_peri, div_aclk_core, cfg;
176 
177 	/*
178 	 * We support two possible frequencies, the safe 600MHz
179 	 * which will work with default pmic settings and will
180 	 * be set in SPL to get away from the 24MHz default and
181 	 * the maximum of 1.6Ghz, which boards can set if they
182 	 * were able to get pmic support for it.
183 	 */
184 	switch (hz) {
185 	case APLL_SAFE_HZ:
186 		cfg = 0;
187 		div_core_peri = 1;
188 		div_aclk_core = 3;
189 		break;
190 	case APLL_HZ:
191 		cfg = 1;
192 		div_core_peri = 2;
193 		div_aclk_core = 3;
194 		break;
195 	default:
196 		debug("Unsupported ARMCLK frequency");
197 		return -EINVAL;
198 	}
199 
200 	/* pll enter slow-mode */
201 	rk_clrsetreg(&cru->cru_mode_con, APLL_MODE_MASK << APLL_MODE_SHIFT,
202 		     APLL_MODE_SLOW << APLL_MODE_SHIFT);
203 
204 	rkclk_set_pll(cru, CLK_ARM, &apll_cfg[cfg], has_bwadj);
205 
206 	/* waiting for pll lock */
207 	while (!(readl(&grf->soc_status0) & SOCSTS_APLL_LOCK))
208 		udelay(1);
209 
210 	/* Set divider for peripherals attached to the cpu core. */
211 	rk_clrsetreg(&cru->cru_clksel_con[0],
212 		CORE_PERI_DIV_MASK << CORE_PERI_DIV_SHIFT,
213 		div_core_peri << CORE_PERI_DIV_SHIFT);
214 
215 	/* set up dependent divisor for aclk_core */
216 	rk_clrsetreg(&cru->cru_clksel_con[1],
217 		CORE_ACLK_DIV_MASK << CORE_ACLK_DIV_SHIFT,
218 		div_aclk_core << CORE_ACLK_DIV_SHIFT);
219 
220 	/* PLL enter normal-mode */
221 	rk_clrsetreg(&cru->cru_mode_con, APLL_MODE_MASK << APLL_MODE_SHIFT,
222 		     APLL_MODE_NORMAL << APLL_MODE_SHIFT);
223 
224 	return hz;
225 }
226 
227 /* Get pll rate by id */
228 static uint32_t rkclk_pll_get_rate(struct rk3188_cru *cru,
229 				   enum rk_clk_id clk_id)
230 {
231 	uint32_t nr, no, nf;
232 	uint32_t con;
233 	int pll_id = rk_pll_id(clk_id);
234 	struct rk3188_pll *pll = &cru->pll[pll_id];
235 	static u8 clk_shift[CLK_COUNT] = {
236 		0xff, APLL_MODE_SHIFT, DPLL_MODE_SHIFT, CPLL_MODE_SHIFT,
237 		GPLL_MODE_SHIFT
238 	};
239 	uint shift;
240 
241 	con = readl(&cru->cru_mode_con);
242 	shift = clk_shift[clk_id];
243 	switch ((con >> shift) & APLL_MODE_MASK) {
244 	case APLL_MODE_SLOW:
245 		return OSC_HZ;
246 	case APLL_MODE_NORMAL:
247 		/* normal mode */
248 		con = readl(&pll->con0);
249 		no = ((con >> CLKOD_SHIFT) & CLKOD_MASK) + 1;
250 		nr = ((con >> CLKR_SHIFT) & CLKR_MASK) + 1;
251 		con = readl(&pll->con1);
252 		nf = ((con >> CLKF_SHIFT) & CLKF_MASK) + 1;
253 
254 		return (24 * nf / (nr * no)) * 1000000;
255 	case APLL_MODE_DEEP:
256 	default:
257 		return 32768;
258 	}
259 }
260 
261 static ulong rockchip_mmc_get_clk(struct rk3188_cru *cru, uint gclk_rate,
262 				  int periph)
263 {
264 	uint div;
265 	u32 con;
266 
267 	switch (periph) {
268 	case HCLK_EMMC:
269 	case SCLK_EMMC:
270 		con = readl(&cru->cru_clksel_con[12]);
271 		div = (con >> EMMC_DIV_SHIFT) & EMMC_DIV_MASK;
272 		break;
273 	case HCLK_SDMMC:
274 	case SCLK_SDMMC:
275 		con = readl(&cru->cru_clksel_con[11]);
276 		div = (con >> MMC0_DIV_SHIFT) & MMC0_DIV_MASK;
277 		break;
278 	case HCLK_SDIO:
279 	case SCLK_SDIO:
280 		con = readl(&cru->cru_clksel_con[12]);
281 		div = (con >> SDIO_DIV_SHIFT) & SDIO_DIV_MASK;
282 		break;
283 	default:
284 		return -EINVAL;
285 	}
286 
287 	return DIV_TO_RATE(gclk_rate, div) / 2;
288 }
289 
290 static ulong rockchip_mmc_set_clk(struct rk3188_cru *cru, uint gclk_rate,
291 				  int  periph, uint freq)
292 {
293 	int src_clk_div;
294 
295 	debug("%s: gclk_rate=%u\n", __func__, gclk_rate);
296 	/* mmc clock defaulg div 2 internal, need provide double in cru */
297 	src_clk_div = DIV_ROUND_UP(gclk_rate / 2, freq) - 1;
298 	assert(src_clk_div <= 0x3f);
299 
300 	switch (periph) {
301 	case HCLK_EMMC:
302 	case SCLK_EMMC:
303 		rk_clrsetreg(&cru->cru_clksel_con[12],
304 			     EMMC_DIV_MASK << EMMC_DIV_SHIFT,
305 			     src_clk_div << EMMC_DIV_SHIFT);
306 		break;
307 	case HCLK_SDMMC:
308 	case SCLK_SDMMC:
309 		rk_clrsetreg(&cru->cru_clksel_con[11],
310 			     MMC0_DIV_MASK << MMC0_DIV_SHIFT,
311 			     src_clk_div << MMC0_DIV_SHIFT);
312 		break;
313 	case HCLK_SDIO:
314 	case SCLK_SDIO:
315 		rk_clrsetreg(&cru->cru_clksel_con[12],
316 			     SDIO_DIV_MASK << SDIO_DIV_SHIFT,
317 			     src_clk_div << SDIO_DIV_SHIFT);
318 		break;
319 	default:
320 		return -EINVAL;
321 	}
322 
323 	return rockchip_mmc_get_clk(cru, gclk_rate, periph);
324 }
325 
326 static ulong rockchip_spi_get_clk(struct rk3188_cru *cru, uint gclk_rate,
327 				  int periph)
328 {
329 	uint div;
330 	u32 con;
331 
332 	switch (periph) {
333 	case SCLK_SPI0:
334 		con = readl(&cru->cru_clksel_con[25]);
335 		div = (con >> SPI0_DIV_SHIFT) & SPI0_DIV_MASK;
336 		break;
337 	case SCLK_SPI1:
338 		con = readl(&cru->cru_clksel_con[25]);
339 		div = (con >> SPI1_DIV_SHIFT) & SPI1_DIV_MASK;
340 		break;
341 	default:
342 		return -EINVAL;
343 	}
344 
345 	return DIV_TO_RATE(gclk_rate, div);
346 }
347 
348 static ulong rockchip_spi_set_clk(struct rk3188_cru *cru, uint gclk_rate,
349 				  int periph, uint freq)
350 {
351 	int src_clk_div = DIV_ROUND_UP(gclk_rate, freq) - 1;
352 
353 	assert(src_clk_div < 128);
354 	switch (periph) {
355 	case SCLK_SPI0:
356 		assert(src_clk_div <= SPI0_DIV_MASK);
357 		rk_clrsetreg(&cru->cru_clksel_con[25],
358 			     SPI0_DIV_MASK << SPI0_DIV_SHIFT,
359 			     src_clk_div << SPI0_DIV_SHIFT);
360 		break;
361 	case SCLK_SPI1:
362 		assert(src_clk_div <= SPI1_DIV_MASK);
363 		rk_clrsetreg(&cru->cru_clksel_con[25],
364 			     SPI1_DIV_MASK << SPI1_DIV_SHIFT,
365 			     src_clk_div << SPI1_DIV_SHIFT);
366 		break;
367 	default:
368 		return -EINVAL;
369 	}
370 
371 	return rockchip_spi_get_clk(cru, gclk_rate, periph);
372 }
373 
374 #ifdef CONFIG_SPL_BUILD
375 static void rkclk_init(struct rk3188_cru *cru, struct rk3188_grf *grf,
376 		       bool has_bwadj)
377 {
378 	u32 aclk_div, hclk_div, pclk_div, h2p_div;
379 
380 	/* pll enter slow-mode */
381 	rk_clrsetreg(&cru->cru_mode_con,
382 		     GPLL_MODE_MASK << GPLL_MODE_SHIFT |
383 		     CPLL_MODE_MASK << CPLL_MODE_SHIFT,
384 		     GPLL_MODE_SLOW << GPLL_MODE_SHIFT |
385 		     CPLL_MODE_SLOW << CPLL_MODE_SHIFT);
386 
387 	/* init pll */
388 	rkclk_set_pll(cru, CLK_GENERAL, &gpll_init_cfg, has_bwadj);
389 	rkclk_set_pll(cru, CLK_CODEC, &cpll_init_cfg, has_bwadj);
390 
391 	/* waiting for pll lock */
392 	while ((readl(&grf->soc_status0) &
393 			(SOCSTS_CPLL_LOCK | SOCSTS_GPLL_LOCK)) !=
394 			(SOCSTS_CPLL_LOCK | SOCSTS_GPLL_LOCK))
395 		udelay(1);
396 
397 	/*
398 	 * cpu clock pll source selection and
399 	 * reparent aclk_cpu_pre from apll to gpll
400 	 * set up dependent divisors for PCLK/HCLK and ACLK clocks.
401 	 */
402 	aclk_div = DIV_ROUND_UP(GPLL_HZ, CPU_ACLK_HZ) - 1;
403 	assert((aclk_div + 1) * CPU_ACLK_HZ == GPLL_HZ && aclk_div <= 0x1f);
404 
405 	rk_clrsetreg(&cru->cru_clksel_con[0],
406 		     CPU_ACLK_PLL_MASK << CPU_ACLK_PLL_SHIFT |
407 		     A9_CPU_DIV_MASK << A9_CPU_DIV_SHIFT,
408 		     CPU_ACLK_PLL_SELECT_GPLL << CPU_ACLK_PLL_SHIFT |
409 		     aclk_div << A9_CPU_DIV_SHIFT);
410 
411 	hclk_div = ilog2(CPU_ACLK_HZ / CPU_HCLK_HZ);
412 	assert((1 << hclk_div) * CPU_HCLK_HZ == CPU_ACLK_HZ && hclk_div < 0x3);
413 	pclk_div = ilog2(CPU_ACLK_HZ / CPU_PCLK_HZ);
414 	assert((1 << pclk_div) * CPU_PCLK_HZ == CPU_ACLK_HZ && pclk_div < 0x4);
415 	h2p_div = ilog2(CPU_HCLK_HZ / CPU_H2P_HZ);
416 	assert((1 << h2p_div) * CPU_H2P_HZ == CPU_HCLK_HZ && pclk_div < 0x3);
417 
418 	rk_clrsetreg(&cru->cru_clksel_con[1],
419 		     AHB2APB_DIV_MASK << AHB2APB_DIV_SHIFT |
420 		     CPU_PCLK_DIV_MASK << CPU_PCLK_DIV_SHIFT |
421 		     CPU_HCLK_DIV_MASK << CPU_HCLK_DIV_SHIFT,
422 		     h2p_div << AHB2APB_DIV_SHIFT |
423 		     pclk_div << CPU_PCLK_DIV_SHIFT |
424 		     hclk_div << CPU_HCLK_DIV_SHIFT);
425 
426 	/*
427 	 * peri clock pll source selection and
428 	 * set up dependent divisors for PCLK/HCLK and ACLK clocks.
429 	 */
430 	aclk_div = GPLL_HZ / PERI_ACLK_HZ - 1;
431 	assert((aclk_div + 1) * PERI_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
432 
433 	hclk_div = ilog2(PERI_ACLK_HZ / PERI_HCLK_HZ);
434 	assert((1 << hclk_div) * PERI_HCLK_HZ ==
435 		PERI_ACLK_HZ && (hclk_div < 0x4));
436 
437 	pclk_div = ilog2(PERI_ACLK_HZ / PERI_PCLK_HZ);
438 	assert((1 << pclk_div) * PERI_PCLK_HZ ==
439 		PERI_ACLK_HZ && (pclk_div < 0x4));
440 
441 	rk_clrsetreg(&cru->cru_clksel_con[10],
442 		     PERI_PCLK_DIV_MASK << PERI_PCLK_DIV_SHIFT |
443 		     PERI_HCLK_DIV_MASK << PERI_HCLK_DIV_SHIFT |
444 		     PERI_ACLK_DIV_MASK << PERI_ACLK_DIV_SHIFT,
445 		     PERI_SEL_GPLL << PERI_SEL_PLL_SHIFT |
446 		     pclk_div << PERI_PCLK_DIV_SHIFT |
447 		     hclk_div << PERI_HCLK_DIV_SHIFT |
448 		     aclk_div << PERI_ACLK_DIV_SHIFT);
449 
450 	/* PLL enter normal-mode */
451 	rk_clrsetreg(&cru->cru_mode_con,
452 		     GPLL_MODE_MASK << GPLL_MODE_SHIFT |
453 		     CPLL_MODE_MASK << CPLL_MODE_SHIFT,
454 		     GPLL_MODE_NORMAL << GPLL_MODE_SHIFT |
455 		     CPLL_MODE_NORMAL << CPLL_MODE_SHIFT);
456 
457 	rockchip_mmc_set_clk(cru, PERI_HCLK_HZ, HCLK_SDMMC, 16000000);
458 }
459 #endif
460 
461 static ulong rk3188_clk_get_rate(struct clk *clk)
462 {
463 	struct rk3188_clk_priv *priv = dev_get_priv(clk->dev);
464 	ulong new_rate, gclk_rate;
465 
466 	gclk_rate = rkclk_pll_get_rate(priv->cru, CLK_GENERAL);
467 	switch (clk->id) {
468 	case 1 ... 4:
469 		new_rate = rkclk_pll_get_rate(priv->cru, clk->id);
470 		break;
471 	case HCLK_EMMC:
472 	case HCLK_SDMMC:
473 	case HCLK_SDIO:
474 	case SCLK_EMMC:
475 	case SCLK_SDMMC:
476 	case SCLK_SDIO:
477 		new_rate = rockchip_mmc_get_clk(priv->cru, PERI_HCLK_HZ,
478 						clk->id);
479 		break;
480 	case SCLK_SPI0:
481 	case SCLK_SPI1:
482 		new_rate = rockchip_spi_get_clk(priv->cru, PERI_PCLK_HZ,
483 						clk->id);
484 		break;
485 	case PCLK_I2C0:
486 	case PCLK_I2C1:
487 	case PCLK_I2C2:
488 	case PCLK_I2C3:
489 	case PCLK_I2C4:
490 		return gclk_rate;
491 	default:
492 		return -ENOENT;
493 	}
494 
495 	return new_rate;
496 }
497 
498 static ulong rk3188_clk_set_rate(struct clk *clk, ulong rate)
499 {
500 	struct rk3188_clk_priv *priv = dev_get_priv(clk->dev);
501 	struct rk3188_cru *cru = priv->cru;
502 	ulong new_rate;
503 
504 	switch (clk->id) {
505 	case PLL_APLL:
506 		new_rate = rkclk_configure_cpu(priv->cru, priv->grf, rate,
507 					       priv->has_bwadj);
508 		break;
509 	case CLK_DDR:
510 		new_rate = rkclk_configure_ddr(priv->cru, priv->grf, rate,
511 					       priv->has_bwadj);
512 		break;
513 	case HCLK_EMMC:
514 	case HCLK_SDMMC:
515 	case HCLK_SDIO:
516 	case SCLK_EMMC:
517 	case SCLK_SDMMC:
518 	case SCLK_SDIO:
519 		new_rate = rockchip_mmc_set_clk(cru, PERI_HCLK_HZ,
520 						clk->id, rate);
521 		break;
522 	case SCLK_SPI0:
523 	case SCLK_SPI1:
524 		new_rate = rockchip_spi_set_clk(cru, PERI_PCLK_HZ,
525 						clk->id, rate);
526 		break;
527 	default:
528 		return -ENOENT;
529 	}
530 
531 	return new_rate;
532 }
533 
534 static struct clk_ops rk3188_clk_ops = {
535 	.get_rate	= rk3188_clk_get_rate,
536 	.set_rate	= rk3188_clk_set_rate,
537 };
538 
539 static int rk3188_clk_ofdata_to_platdata(struct udevice *dev)
540 {
541 #if !CONFIG_IS_ENABLED(OF_PLATDATA)
542 	struct rk3188_clk_priv *priv = dev_get_priv(dev);
543 
544 	priv->cru = dev_read_addr_ptr(dev);
545 #endif
546 
547 	return 0;
548 }
549 
550 static int rk3188_clk_probe(struct udevice *dev)
551 {
552 	struct rk3188_clk_priv *priv = dev_get_priv(dev);
553 	enum rk3188_clk_type type = dev_get_driver_data(dev);
554 
555 	priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
556 	if (IS_ERR(priv->grf))
557 		return PTR_ERR(priv->grf);
558 	priv->has_bwadj = (type == RK3188A_CRU) ? 1 : 0;
559 
560 #ifdef CONFIG_SPL_BUILD
561 #if CONFIG_IS_ENABLED(OF_PLATDATA)
562 	struct rk3188_clk_plat *plat = dev_get_platdata(dev);
563 
564 	priv->cru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]);
565 #endif
566 
567 	rkclk_init(priv->cru, priv->grf, priv->has_bwadj);
568 #endif
569 
570 	return 0;
571 }
572 
573 static int rk3188_clk_bind(struct udevice *dev)
574 {
575 	int ret;
576 	struct udevice *sys_child;
577 	struct sysreset_reg *priv;
578 
579 	/* The reset driver does not have a device node, so bind it here */
580 	ret = device_bind_driver(dev, "rockchip_sysreset", "sysreset",
581 				 &sys_child);
582 	if (ret) {
583 		debug("Warning: No sysreset driver: ret=%d\n", ret);
584 	} else {
585 		priv = malloc(sizeof(struct sysreset_reg));
586 		priv->glb_srst_fst_value = offsetof(struct rk3188_cru,
587 						    cru_glb_srst_fst_value);
588 		priv->glb_srst_snd_value = offsetof(struct rk3188_cru,
589 						    cru_glb_srst_snd_value);
590 		sys_child->priv = priv;
591 	}
592 
593 #if CONFIG_IS_ENABLED(CONFIG_RESET_ROCKCHIP)
594 	ret = offsetof(struct rk3188_cru, cru_softrst_con[0]);
595 	ret = rockchip_reset_bind(dev, ret, 9);
596 	if (ret)
597 		debug("Warning: software reset driver bind faile\n");
598 #endif
599 
600 	return 0;
601 }
602 
603 static const struct udevice_id rk3188_clk_ids[] = {
604 	{ .compatible = "rockchip,rk3188-cru", .data = RK3188_CRU },
605 	{ .compatible = "rockchip,rk3188a-cru", .data = RK3188A_CRU },
606 	{ }
607 };
608 
609 U_BOOT_DRIVER(rockchip_rk3188_cru) = {
610 	.name			= "rockchip_rk3188_cru",
611 	.id			= UCLASS_CLK,
612 	.of_match		= rk3188_clk_ids,
613 	.priv_auto_alloc_size	= sizeof(struct rk3188_clk_priv),
614 	.platdata_auto_alloc_size = sizeof(struct rk3188_clk_plat),
615 	.ops			= &rk3188_clk_ops,
616 	.bind			= rk3188_clk_bind,
617 	.ofdata_to_platdata	= rk3188_clk_ofdata_to_platdata,
618 	.probe			= rk3188_clk_probe,
619 };
620