xref: /openbmc/u-boot/drivers/clk/at91/clk-system.c (revision e3963c09)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2016 Atmel Corporation
4  *               Wenyou.Yang <wenyou.yang@atmel.com>
5  */
6 
7 #include <common.h>
8 #include <clk-uclass.h>
9 #include <dm.h>
10 #include <linux/io.h>
11 #include <mach/at91_pmc.h>
12 #include "pmc.h"
13 
14 #define SYSTEM_MAX_ID		31
15 
16 /**
17  * at91_system_clk_bind() - for the system clock driver
18  * Recursively bind its children as clk devices.
19  *
20  * @return: 0 on success, or negative error code on failure
21  */
22 static int at91_system_clk_bind(struct udevice *dev)
23 {
24 	return at91_clk_sub_device_bind(dev, "system-clk");
25 }
26 
27 static const struct udevice_id at91_system_clk_match[] = {
28 	{ .compatible = "atmel,at91rm9200-clk-system" },
29 	{}
30 };
31 
32 U_BOOT_DRIVER(at91_system_clk) = {
33 	.name = "at91-system-clk",
34 	.id = UCLASS_MISC,
35 	.of_match = at91_system_clk_match,
36 	.bind = at91_system_clk_bind,
37 };
38 
39 /*----------------------------------------------------------*/
40 
41 static inline int is_pck(int id)
42 {
43 	return (id >= 8) && (id <= 15);
44 }
45 
46 static ulong system_clk_get_rate(struct clk *clk)
47 {
48 	struct clk clk_dev;
49 	int ret;
50 
51 	ret = clk_get_by_index(clk->dev, 0, &clk_dev);
52 	if (ret)
53 		return -EINVAL;
54 
55 	return clk_get_rate(&clk_dev);
56 }
57 
58 static ulong system_clk_set_rate(struct clk *clk, ulong rate)
59 {
60 	struct clk clk_dev;
61 	int ret;
62 
63 	ret = clk_get_by_index(clk->dev, 0, &clk_dev);
64 	if (ret)
65 		return -EINVAL;
66 
67 	return clk_set_rate(&clk_dev, rate);
68 }
69 
70 static int system_clk_enable(struct clk *clk)
71 {
72 	struct pmc_platdata *plat = dev_get_platdata(clk->dev);
73 	struct at91_pmc *pmc = plat->reg_base;
74 	u32 mask;
75 
76 	if (clk->id > SYSTEM_MAX_ID)
77 		return -EINVAL;
78 
79 	mask = BIT(clk->id);
80 
81 	writel(mask, &pmc->scer);
82 
83 	/**
84 	 * For the programmable clocks the Ready status in the PMC
85 	 * status register should be checked after enabling.
86 	 * For other clocks this is unnecessary.
87 	 */
88 	if (!is_pck(clk->id))
89 		return 0;
90 
91 	while (!(readl(&pmc->sr) & mask))
92 		;
93 
94 	return 0;
95 }
96 
97 static struct clk_ops system_clk_ops = {
98 	.of_xlate = at91_clk_of_xlate,
99 	.get_rate = system_clk_get_rate,
100 	.set_rate = system_clk_set_rate,
101 	.enable = system_clk_enable,
102 };
103 
104 U_BOOT_DRIVER(system_clk) = {
105 	.name = "system-clk",
106 	.id = UCLASS_CLK,
107 	.probe = at91_clk_probe,
108 	.platdata_auto_alloc_size = sizeof(struct pmc_platdata),
109 	.ops = &system_clk_ops,
110 };
111